1
|
Lu J, Jiang H, Guo P, Li J, Zhu H, Fan X, Huang L, Sun J, Wang Y. Application of Copper-Sulfur Compound Electrode Materials in Supercapacitors. Molecules 2024; 29:977. [PMID: 38474488 DOI: 10.3390/molecules29050977] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2024] [Revised: 02/16/2024] [Accepted: 02/21/2024] [Indexed: 03/14/2024] Open
Abstract
Supercapacitors (SCs) are a novel type of energy storage device that exhibit features such as a short charging time, a long service life, excellent temperature characteristics, energy saving, and environmental protection. The capacitance of SCs depends on the electrode materials. Currently, carbon-based materials, transition metal oxides/hydroxides, and conductive polymers are widely used as electrode materials. However, the low specific capacitance of carbon-based materials, high cost of transition metal oxides/hydroxides, and poor cycling performance of conductive polymers as electrodes limit their applications. Copper-sulfur compounds used as electrode materials exhibit excellent electrical conductivity, a wide voltage range, high specific capacitance, diverse structures, and abundant copper reserves, and have been widely studied in catalysis, sensors, supercapacitors, solar cells, and other fields. This review summarizes the application of copper-sulfur compounds in SCs, details the research directions and development strategies of copper-sulfur compounds in SCs, and analyses and summarizes the research hotspots and outlook, so as to provide a reference and guidance for the use of copper-sulfur compounds.
Collapse
Affiliation(s)
- Junhua Lu
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Hedong Jiang
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Pingchun Guo
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Jiake Li
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Hua Zhu
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Xueyun Fan
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Liqun Huang
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Jian Sun
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| | - Yanxiang Wang
- School of Materials Science and Engineering, Jingdezhen Ceramic Institute, Jingdezhen 333403, China
| |
Collapse
|
2
|
NiS/Cu7S4 composites as high-performance supercapacitor electrodes. J Solid State Electrochem 2022. [DOI: 10.1007/s10008-022-05259-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/10/2022]
|
3
|
Synthesis of nickel, calcium and magnesium naphthalene diimide complexes as supercapacitor materials. CHEMICAL PAPERS 2022. [DOI: 10.1007/s11696-022-02442-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
4
|
Chen L, Kong Z, Hu H, Tao H, Wang Y, Gao J, Li G. Manipulating Cation Exchange Reactions in Cu 2-xS Nanoparticles via Crystal Structure Transformation. Inorg Chem 2022; 61:9063-9072. [PMID: 35671331 DOI: 10.1021/acs.inorgchem.2c00532] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Copper-deficient Cu2-xS nanoparticles (NPs) are extensively exploited as a superior cation exchange (CE) template to yield sophisticated nanostructures. Recently, it has been discovered that their CE reactions can be facilely manipulated by copper vacancy density, morphology, and NP size. However, the structural similarity of usually utilized Cu2-xS somewhat limits the manipulation of the CE reactions through the factor of crystal structure because it can strongly influence the process of the reaction. Herein, we report a methodology of crystal structure transformation to manipulate the CE reactions. Particularly, roxbyite Cu1.8S nanodisks (NDs) were converted into solid wurtzite CdS NDs and Janus-type Cu1.94S/CdS NDs by a "full"/partial CE reaction with Cd2+. Afterward, the roxbyite Cu1.8S were pseudomorphically transformed into covellite CuS NDs. Unlike Cu1.8S, the CuS was scarcely exchanged because of the unique disulfide (S-S) bonds and converted into hollow wurtzite CdS under a more reactive condition. The S-S bonds were gradually split and CuS@CdS core@shell-type NDs were generated. Therefore, our findings in the present study provide not only a versatile technique to manipulate CE reactions in Cu2-xS NPs but also a better comprehension of their reaction dynamics and pathways.
Collapse
Affiliation(s)
- Lihui Chen
- School of Petrochemical Engineering & Environment, Zhejiang Ocean University, No. 1, Haida South Road, Lincheng Changzhi Island, Zhoushan 316022, China
| | - Zhenzhen Kong
- College of Chemical Engineering, Zhejiang University of Technology, 18, Chaowang Road, Hangzhou 310014, China
| | - Haifeng Hu
- College of Chemical Engineering, Zhejiang University of Technology, 18, Chaowang Road, Hangzhou 310014, China
| | - Hengcong Tao
- School of Petrochemical Engineering & Environment, Zhejiang Ocean University, No. 1, Haida South Road, Lincheng Changzhi Island, Zhoushan 316022, China
| | - Yuhua Wang
- School of Petrochemical Engineering & Environment, Zhejiang Ocean University, No. 1, Haida South Road, Lincheng Changzhi Island, Zhoushan 316022, China
| | - Jing Gao
- College of Chemical Engineering, Zhejiang University of Technology, 18, Chaowang Road, Hangzhou 310014, China
| | - Guohua Li
- College of Chemical Engineering, Zhejiang University of Technology, 18, Chaowang Road, Hangzhou 310014, China
| |
Collapse
|
5
|
Sekhar SC, Ramulu B, Arbaz SJ, Hussain SK, Yu JS. One-Pot Hydrothermal-Derived NiS 2 -CoMo 2 S 4 with Vertically Aligned Nanorods as a Binder-Free Electrode for Coin-Cell-Type Hybrid Supercapacitor. SMALL METHODS 2021; 5:e2100335. [PMID: 34927874 DOI: 10.1002/smtd.202100335] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/25/2021] [Revised: 06/20/2021] [Indexed: 06/14/2023]
Abstract
Transition bimetallic sulfides are exploited as high-capacity electrode materials in energy storage devices owing to their abundant electroactive sites and relatively high electrical conductivity compared with metal oxides. Here, an in situ conversion of metal ions into NiS2 -CoMo2 S4 vertically aligned nanorod arrays on nickel foam (NS-CMS NRAs@NF) using a one-step hydrothermal technique to address the "dead-mass" limitation and multi-step preparation methods is reported. An in situ-converted NS-CMS NRAs obtained for 12 h of reaction time (NS-CMS NRAs-12 h@NF) delivers a superior areal capacity of 780 μAh cm-2 to the other NS-CMS electrodes synthesized for 6 h (543.1 μAh cm-2 ) and 18 h (636.7 μAh cm-2 ) at 7 mA cm-2 . A coin-cell-type hybrid supercapacitor (HSC) is also fabricated to unveil the practical adaptability of NS-CMS NRAs-12 h@NF electrode. Utilizing its structural and active material intriguing features, assembled coin-cell-type HSC achieves a high areal capacitance of 246.2 mF cm-2 (5 mA cm-2 ) along with maximum areal energy density (147 μWh cm-2 ) and power density (21.3 mW cm-2 ), respectively. Furthermore, the capability of coin-cell-type HSC in real-time applications is also inspected. This work promotes in situ deposition strategy to fabricate metal sulfide-based nanostructures for high-performance electrochemical capacitors.
Collapse
Affiliation(s)
- S Chandra Sekhar
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Gihung-gu, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Bhimanaboina Ramulu
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Gihung-gu, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Shaik Junied Arbaz
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Gihung-gu, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Sk Khaza Hussain
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Gihung-gu, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| | - Jae Su Yu
- Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Gihung-gu, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
| |
Collapse
|
6
|
Yuan Y, Jia H, Liu Z, Wang L, Sheng J, Fei W. A highly conductive Ni(OH) 2 nano-sheet wrapped CuCo 2S 4 nano-tube electrode with a core-shell structure for high performance supercapacitors. Dalton Trans 2021; 50:8476-8486. [PMID: 34047737 DOI: 10.1039/d1dt01075a] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The design of microstructures and the optimum selection of electrode materials have substantial effects on the electrochemical performances of supercapacitors. A core-shell structured CuCo2S4@Ni(OH)2 electrode material was designed, with CuCo2S4 nanotubes as the core wrapped by interlaced Ni(OH)2 nano-sheets as the shell. The hydrothermal and electro-deposition processes were adopted to synthesize CuCo2S4@Ni(OH)2 materials. The CuCo2S4 nanotubes can both provide specific capacitance and act as a "superhighway" for electrons due to their highly conductive skeleton structure. The Ni(OH)2 nano-sheets will boost the electrochemically active sites and enhance the specific surface area. Meanwhile, the mutually restricted core-shell CuCo2S4@Ni(OH)2 electrode could regulate the volume deformation to improve its stability. The CuCo2S4@Ni(OH)2 electrode had a maximum specific capacitance of 2668.4 F g-1 at a current density of 1 A g-1 and a superior cycling stability of 90.3% after 10 000 cycles. Moreover, a CuCo2S4@Ni(OH)2//active carbon asymmetric supercapacitor with a maximum energy density of 44 W h kg-1 was assembled, suggesting that CuCo2S4@Ni(OH)2 is a successful binder-free electrode material for high performance supercapacitors.
Collapse
Affiliation(s)
- Yinan Yuan
- School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
| | | | | | | | | | | |
Collapse
|
7
|
Zhou Y, Han L. Recent advances in naphthalenediimide-based metal-organic frameworks: Structures and applications. Coord Chem Rev 2021. [DOI: 10.1016/j.ccr.2020.213665] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
8
|
Luo Y, Wang Q, Li J, Xu F, Sun L, Bu Y, Zou Y, Kraatz HB, Rosei F. Tunable hierarchical surfaces of CuO derived from metal–organic frameworks for non-enzymatic glucose sensing. Inorg Chem Front 2020. [DOI: 10.1039/d0qi00104j] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A facile thermal treatment is conducted to prepare nanosphere stacking CuO derived from Cu-MOF, which achieves good glucose sensing performance and is expected to be effective for developing non-enzyme and non-invasive glucose sensors.
Collapse
Affiliation(s)
- Yumei Luo
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
- School of Electronic Engineering and Automation
| | - Qingyong Wang
- Key Laboratory of Material Chemistry for Energy Conversion and Storage (Ministry of Education)
- Hubei Key Laboratory of Material Chemistry and Service Failure
- School of Chemistry and Chemical Engineering
- Wuhan National Laboratory for Optoelectronics
- Huazhong University of Science and Technology
| | - Jinghua Li
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
| | - Fen Xu
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
| | - Lixian Sun
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
- School of Electronic Engineering and Automation
| | - Yiting Bu
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
| | - Yongjin Zou
- Guangxi Collaborative Innovation Center of Structure and Property for New Energy
- Guangxi Key Laboratory of Information Materials
- Guilin 541004
- P.R. China
| | - Heinz-Bernhard Kraatz
- Department Physics & Environment Science
- University of Toronto Scarborough
- Toronto
- Canada
| | - Federico Rosei
- Institut National de la Recherche Scientifique—Énergie
- Matériaux et Télécommunications
- QC
- Canada
| |
Collapse
|