Tailor-made synthesis of an melamine-based aminal hydrophobic polymer for selective adsorption of toxic organic pollutants: an initiative towards wastewater purification

Evaluation of an Imine-Linked Polymer Organic Framework for Storage and Release of H2S and NO

Hydrogen sulfide (H₂S) and nitric oxide (NO) are especially known as toxic and polluting gases, yet they are also endogenously produced and play key roles in numerous biological processes. These two opposing aspects of the gases highlight the need for new types of materials to be developed in addition to the most common materials such as activated carbons and zeolites. Herein, a new imine-linked polymer organic framework was obtained using the inexpensive and easy-to-access reagents isophthalaldehyde and 2,4,6-triaminopyrimidine in good yield (64%) through the simple and catalyst-free Schiff-base reaction. The polymeric material has microporosity, an A_BET surface area of 51 m²/g, and temperature stability up to 300 °C. The obtained 2,4,6-triaminopyrimidine imine-linked polymer organic material has a higher capacity to adsorb NO (1.6 mmol/g) than H₂S (0.97 mmol/g). Release studies in aqueous solution showed that H₂S has a faster release (3 h) from the material than NO, for which a steady release was observed for at least 5 h. This result is the first evaluation of the possibility of an imine-linked polymer organic framework being used in the therapeutic release of NO or H₂S.

Facile fabrication of hierarchical textures for substrate-independent and durable superhydrophobic surfaces

On account of their wide range of applications in self-cleaning, anti-icing, frost suppression, etc., superhydrophobic surfaces have attracted considerate attention. However, most of the superhydrophobic surfaces can only be prepared on the surfaces of specific materials and are easily damaged in the case of friction. In this work, we propose a facile method to achieve superhydrophobicity on various substrate surfaces. By femtosecond laser direct processing, micron-level grooves and protrusions are constructed on substrates to form a protective layer. Then, the substrates covered by polytetrafluoroethylene (PTFE) were scanned to make the surfaces of the substrates superhydrophobic. Since the PTFE micro-nano-particles are evenly distributed on the grooves and protrusions, the surfaces exhibit robust superhydrophobicity with excellent anti-friction performance that is independent of the substrate properties. This work provides an efficient and environmentally friendly path for achieving robust superhydrophobic surfaces on various substrates.

Synthesis of Naphthalene-Based Polyaminal-Linked Porous Polymers for Highly Effective Uptake of CO2 and Heavy Metals

Studying the effect of functional groups on the porosity structure and adsorption efficiency of polymer materials is becoming increasingly interesting. In this work, a novel porous polyaminal-linked polymer, based on naphthalene and melamine (PAN-NA) building blocks, was successfully synthesized by a one-pot polycondensation method, and used as an adsorbent for both CO₂ and heavy metals. Fourier transform infrared spectroscopy, solid-state ¹³ C NMR, powder X-ray diffraction, and thermogravimetry were used to characterize the prepared polymer. The porous material structure was established by field-emission scanning electron microscope and N₂ adsorption–desorption methods at 77 K. The polymer exhibited excellent uptake of CO₂, 133 mg/g at 273 K and 1 bar. In addition, the adsorption behavior of PAN-NA for different metal cations, including Pb(II), Cr(III), Cu(II), Cd(II), Ni(II), and Ba(II), was investigated; a significant adsorption selectivity toward the Pb(II) cation was detected. The influence of pH, adsorbent dose, initial concentrations, and contact time was also assessed. Our results prove that the introduction of naphthalene in the polymer network improves the porosity and, thus, CO₂ adsorption, as well as the adsorption of heavy metals.

A Carbazole-Functionalized Porous Aromatic Framework for Enhancing Volatile Iodine Capture via Lewis Electron Pairing

Nitrogen-rich porous networks with additional polarity and basicity may serve as effective adsorbents for the Lewis electron pairing of iodine molecules. Herein a carbazole-functionalized porous aromatic framework (PAF) was synthesized through a Sonogashira-Hagihara cross-coupling polymerization of 1,3,5-triethynylbenzene and 2,7-dibromocarbazole building monomers. The resulting solid with a high nitrogen content incorporated the Lewis electron pairing effect into a π-conjugated nano-cavity, leading to an ultrahigh binding capability for iodine molecules. The iodine uptake per specific surface area was ~8 mg m-2 which achieved the highest level among all reported I2 adsorbents, surpassing that of the pure biphenyl-based PAF sample by ca. 30 times. Our study illustrated a new possibility for introducing electron-rich building units into the design and synthesis of porous adsorbents for effective capture and removal of volatile iodine from nuclear waste and leakage.

Exploration of collagen cavitation based on peptide electrolysis

Electrochemical modification of animal skin is a new material preparation method and new direction of research exploration. In this study, under the action of the electric field using NaCl as the supporting electrolyte, the effect of electrolysis on Glycyl-glycine(GlyGl), gelatin(Gel) and Three-dimensional rawhide collagen(3DC) were determined. The amino group of GlyGl is quickly eliminated within the anode region by electrolysis isolated by an anion exchange membrane. Using the same method, it was found that the molecular weight of Gel and the isoelectric point of the Gel decreased, and the viscosity and transparency of the Gel solution obviously changed. The electrolytic dissolution and structural changes of 3DC were further investigated. The results of TOC and TN showed that the organic matter in 3DC was dissolved by electrolysis, and the tissue cavitation was obvious. A new approach for the preparation of collagen-based multi-pore biomaterials by electrochemical method was explored.

The designed synthesis of a hydrophobic covalent polymer composite to expel toxic dyes and oil from wastewater: theoretical corroboration

In pursuit of addressing a global issue linked to the purification of contaminated water bodies, hydrophobic covalent organic framework (CPCMERI-2020) and its post-synthetically modified composites CPWCS and MS@CPWCS are reported herein.

Development of surface imprinted heterogeneous nitrogen-doped magnetic carbon nanotubes as promising materials for protein separation and purification

To promote the development of molecular imprinting technique in the separation and analysis of protein, novel bovine serum albumin (BSA) surface imprinted nitrogen-doped magnetic carbon nanotubes (N-MCNTs@MIPs) are developed by this paper. The imprinted materials are prepared by depositing polydopamine (PDA) on the surface of nitrogen-doped magnetic carbon nanotubes (N-MCNTs). N-MCNTs prepared by high temperature pyrolysis and chemical vapor deposition exhibit high specific surface area, positive hydrophilicity, abundant nitrogen functional groups and excellent magnetic properties. These characteristics are conducive to the increase of effective binding sites, the smooth development of the protein imprinting process in the aqueous phase, the improvement of the binding capacity and the simplification of the separation process. The amount of BSA adsorbing on the N-MCNTs@MIPs can reach 150.86 mg/g within 90 min. The imprinting factor (IF) is 1.43. The results of competitive adsorption and separation of fetal bovine serum showed that N-MCNTs@MIPs can specifically recognize BSA. The excellent reusability and separation ability for real sample prove that N-MCNTs@MIPs have the potential to be applied to the separation and purification of proteins in complex biological samples.