Synthesis of benzimidazolones by immobilized gold nanoparticles on chitosan extracted from shrimp shells supported on fibrous phosphosilicate

Effective Removal of Fe (III) from Strongly Acidic Wastewater by Pyridine-Modified Chitosan: Synthesis, Efficiency, and Mechanism

A novel pyridine-modified chitosan (PYCS) adsorbent was prepared in a multistep procedure including the successive grafting of 2-(chloromethyl) pyridine hydrochloride and crosslinking with glutaraldehyde. Then, the as-prepared materials were used as adsorbents for the removal of metal ions from acidic wastewater. Batch adsorption experiments were carried out to study the impact of various factors such as solution pH value, contact time, temperature, and Fe (III) concentration. The results showed that the absorbent exhibited a high capacity of Fe (III) and the maximum adsorption capacity was up to 66.20 mg/g under optimal experimental conditions (the adsorption time = 12 h, pH = 2.5, and T = 303 K). Adsorption kinetics and isotherm data were accurately described by the pseudo-second-order kinetic model and Sips model, respectively. Thermodynamic studies confirmed that the adsorption was a spontaneous endothermic process. Moreover, the adsorption mechanism was investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The results revealed the pyridine group forms a stable chelate with iron (III) ions. Therefore, this acid-resistant adsorbent exhibited excellent adsorption performance for heavy metal ions from acidic wastewater compared to the conventional adsorbents, helping realize direct decontamination and secondary utilization.

Encapsulation of Nepeta hormozganica and Nepeta dschuprensis essential oils in shrimp chitosan NPs: Enhanced antifungal activity

This study investigated the encapsulation of Nepeta hormozganica (NHEO) and Nepeta Dschuprensis (NDEO) essential oils into chitosan nanoparticles (CSN) via a simple ionic gelation method with tripolyphosphate (TPP). Chitosan (CS) is prepared by demineralizing, deproteinizing, and deacetylating shrimp shells waste in high yield (70.2 %). SEM, TEM, FT-IR, TGA, and XRD techniques were employed to characterize the encapsulated essential oils ((NHEO-CSN) and (NDEO-CSN)). The prepared EOs-CSN and CSN are found with particle sizes of 100-150 nm and 400-500 nm, respectively, and regular distribution. The encapsulation efficiency of encapsulated Nepeta hormozganica and Dschuprensis essential oils were found to be 73.64 % and 75.91 %, respectively. The synthesized nanocapsules were evaluated for antifungal activity against Fusarium oxysporium, Sclerotinia sclerotiorum, Pythium aphanidermatum, Alternaria alternata, Rhizactonia Solani, and Botrytis cinerea. Antifungal studies show that encapsulated essential oils increased antifungal efficiency by up to 100 %.

A review: Silver–zinc oxide nanoparticles – organoclay-reinforced chitosan bionanocomposites for food packaging

Research on bionanocomposites has been developed, while its application as food packaging is still being explored. They are usually made from natural polymers such as cellulose acetate, chitosan (CS), and polyvinyl alcohol. Bionanocomposite materials can replace traditional non-biodegradable plastic packaging materials, enabling them to use new, high-performance, lightweight, and environmentally friendly composite materials. However, this natural polymer has a weakness in mechanical properties. Therefore, a composite system is needed that will improve the properties of the biodegradable food packaging. The aim of this mini-review is to demonstrate recent progress in the synthesis, modification, characterization, and application of bionanocomposites reported by previous researchers. The focus is on the preparation and characterization of CS-based bionanocomposites. The mechanical properties of CS-based food packaging can be improved by adding reinforcement from inorganic materials such as organoclay. Meanwhile, the anti-bacterial properties of CS-based food packaging can be improved by adding nanoparticles such as Ag and ZnO.

Chitosan nanocomposite incorporated Satureja kermanica essential oil and extract: Synthesis, characterization and antifungal assay

The present study reports the design, synthesis, and characterization of nanoencapsulated Satureja kermanica essential oil/extract by chitosan biopolymer (SKEO-CSN)/(SKEX-CSN) for the antifungal efficacy against Fusarium oxysporum, Alternaria alternata, Botrytis cinerea, Sclerotinia sclerotiorum, Rhizoctonia solani, and Pythium aphanidermatum. The prepared SKEO-CSN and SKEX-CSN were characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). GC-Mass analysis was done to identify Satureja kermanica essential oil chemical compounds (SKEO). Thirty-five different components were detected from GC-MS analysis. Thymol (46.54 %), and Carvacrol (30.54 %) were demonstrated as major compounds. Antifungal studies showed that the SKEO-CSN and SKEX-CSN formulation effectively inhibit fungal growth more than free SKEO and SKEX. According to the results, SKEO-CSN and SKEX-CSN provide a wide range of promising antifungal effects and can be applied as an efficient green strategy to protect plants from fungus infections.

Adsorption of Pb(II) from water by treatment with an O-hydroxyphenyl thiourea-modified chitosan

An O-hydroxyphenyl thiourea-modified chitosan (OTCS) with excellent Pb(II) adsorption performance and selectivity was prepared as an adsorbent. The structure and morphology of the adsorbent were systematically investigated by SEM, BET, FTIR, EDX, zeta-potential measurements, XPS and XRD. The impacts of the initial Pb(II) concentration, reaction time, temperature, pH value, and coexisting ions were explored. At pH 7 and 303 K, the maximal adsorption capacity of OTCS for Pb(II) was 208.33 mg/g, which was greater than those of other adsorbing materials reported in the literature. The metal ion adsorption kinetics and isotherm models were found to obey pseudo-second-order kinetics and the Langmuir isothermal model, indicating that the adsorption process was monolayer chemisorption. The adsorption process could proceed spontaneously, and the thermodynamic results revealed that the adsorption mechanism was an endothermic reaction. The ion exchange and chelation between the sulfur, nitrogen and oxygen groups on the adsorbent and lead ions endowed the material with excellent adsorption properties. Significantly, OTCS showed excellent selectivity toward Pb(II). Therefore, the adsorbent OTCS is expected to promote the wider application of chitosan in the adsorption of Pb(II).

Phyto-Assisted Assembly of Metal Nanoparticles in Chitosan Matrix Using S. argel Leaf Extract and Its Application for Catalytic Oxidation of Benzyl Alcohol

The design and synthesis of eco-friendly solid-supported metal nanoparticles with remarkable stability and catalytic performance have gained much attention for both industrial and environmental applications. This study provides a novel, low-cost, simple, and eco-friendly approach for decorating cross-linked chitosan with gold nanoparticles (AuNPs), greenly prepared with Solenostemma argel (S. argel) leaf extract under mild conditions. Glutaraldehyde-modified chitosan beads were used to coordinate with Au(III) ions and act as stabilizing agents, and S. argel leaf extract was used as a cost-effective phyto-reducing agent to reduce gold ions to elemental Au nanoparticles. The successful cross-linking of chitosan with glutaraldehyde, the coordination of Au(III) ions into the chitosan matrix, and the phytochemical reduction of Au(III) to Au nanoparticles were investigated via FT-IR spectroscopy. The obtained Au nanoparticles have a uniform spherical shape and size <10 nm, as confirmed by both X-ray diffraction (XRD) (~8.8 nm) and TEM (6.0 ± 3 nm). The uniformity of the AuNPs’ size was confirmed by Scanning Electron Microscopy (SEM) and Transition Electron Microscopy (TEM). The powder X-ray diffraction technique showed crystalline AuNPs with a face-centered cubic structure. The elemental analysis and the Energy Dispersive Spectroscopy (EDS) analysis both confirmed the successful integration of Au nanoparticles with the chitosan network. The catalytic activity of this highly stable nanocomposite was systematically investigated via the selective oxidation of benzyl alcohol to benzaldehyde. Results showed a remarkable conversion (97%) and excellent selectivity (99%) in the formation of benzaldehyde over other side products.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Hydrosilane-Assisted Synthesis of Urea Derivatives from CO2 and Amines

A methodology employing CO₂, amines, and phenylsilane was discussed to access aryl- or alkyl-substituted urea derivatives. This procedure was characterized by adopting hydrosilane to promote the formation of ureas directly, without the need to prepare silylamines in advance. Control reactions suggested that FeCl₃ was a favorable additive for the generation of ureas, and this 1,5,7-triazabicyclo[4.4.0]dec-5-ene-catalyzed reaction might proceed through nucleophilic addition, silicon migration, and the subsequent formal substitution of silylcarbamate.

Unexpected regio- and stereoselective [4 + 3] cycloaddition reaction of azomethine ylides with benzylidene thiazolidinediones: synthesis of pharmacologically active spiroindoline oxazepine derivatives and theoretical study

An unexpected regio- and stereoselective [4 + 3] cycloaddition reaction of azomethine ylides with 5-benzylidenethiazolidine-2,4-diones has been successfully developed for the synthesis of the novel pharmacologically active 4',5'-dihydro-3'H-spiro[indoline-3,2'-[1, 3] oxazepin]-2-one derivatives in basic condition. Easy purification, high yield, short experimental time and operational simplicity are specific advantages of this protocol. Furthermore, all the synthesized compounds have been evaluated for antioxidant and antibacterial activities. According to the results, most of the synthesized compounds exhibited DPPH radical scavenging activity and nine of them showed antibacterial properties. The reaction mechanism and ¹H NMR spectrum have been evaluated by B3LYP/6311G method.