Generation of engineered core-shell antibiotic nanoparticles

Comparison of the Effect of Adding Different Levels of Zinc Chloride, Curcumin, Zinc Oxide Nanoparticles (Zano-NPs), Curcumin Loaded on Zano-NPs on Post-Thawing Quality of Ram Semen

OBJECTIVE

This study looked at how different concentrations of curcumin (Curc), zinc chloride (ZnCl2), zinc oxide nanoparticles (ZnO-NPs) and Curc loaded on ZnO-NPs (Curc-co-ZnO-NPs) in cryopreservation dilution affected the quality of ram sperm after thawing.

METHODS

ZnO-NPs were synthesised using Berberis vulgaris leaf aqueous extract. Then, Curc was loaded on the ZnO-NPs that had been synthesised. We used analytical methods to look at the composition, morphology and size of green synthesised ZnO-NPs and Curc-co-ZnO-NPs, including UV-Vis, zeta potential, EDX, DLS, FE-SEM and FT-IR. Using a Tris-base extender containing various concentrations of Curc, ZnCl2, ZnO-NPs and Curc-co-ZnO-NPs (0, 1, 10 and 100 µg/mL), semen samples from four rams were combined. Sperm motility, viability, DNA and plasma membrane integrity, total abnormalities and malondialdehyde (MDA) generation were all evaluated in treatment groups after thawing.

RESULTS

The results showed that adding 1 µg/mL of ZnO-NPs and Curc-co-ZnO-NPs significantly reduced the level of MDA and total abnormalities (p < 0.05). Additionally, following the freeze-thawing procedure, the presence of 1 µg/mL of Curc-co-ZnO-NPs in the diluent of ram sperm significantly increased the percentage of sperm viability and motility in comparison to the control and other treatment groups (p < 0.05). Furthermore, as compared to the control group and other treatments, treatments containing 1 µg/mL of Curc-co-ZnO-NPs significantly improved membrane and DNA integrity (p < 0.05).

CONCLUSIONS

It appears that following freeze-thawing, the Curc-co-ZnO-NPs (1 µg/mL) enhanced sperm parameters.

Facile synthesis of NiSe2-ZnO nanocomposites for enhanced photocatalysis and wastewater remediation

In this study, NiSe2 nanocubes, ZnO rods, and their composites were prepared by simple chemical methods to investigate their photocatalytic response and antibacterial activity. The optimal concentration of NiSe2 nanocubes was explored for enhanced photocatalytic performance by varying its percentage in the NiSe2-ZnO composites. The findings suggested that the optical response of ZnO was significantly improved and shifted towards visible region by incorporating NiSe2 as a co-catalyst. The photocatalytic properties of NiSe2, ZnO, and NiSe2-ZnO composites were assessed under visible light by using methylene blue (MB) as a model pollutant. The results showed that the optimized composite containing 75% NiSe2 with ZnO exhibited outstanding photocatalytic efficiency of 97%. The degradation of MB dye by NiSe2, ZnO, and their composites followed the pseudo-first-order reaction kinetics (Langmuir-Hinshelwood model). Furthermore, the prepared NiSe2-ZnO composite displayed exceptional reusability and stability over a number of cycles, demonstrating its practical applicability. This research presents unique findings, showcasing the comparative antibacterial performance of NiSe2, ZnO, and NiSe2-ZnO nanocomposites against Bacillus cereus (B. cereus). Of all the prepared photocatalysts, the 75% NiSe2-ZnO nanocomposite revealed the best performance, exhibiting an inhibition zone of 28 mm.

Investigation Cytotoxicity and Curcumin Release Behavior by Pyranopyrazole-TiO2@niosome Carrier for Breast Cancer Treatment

In the present study, we present a pyranopyrazole-TiO2 which is encapsulated with a niosome as nanocarrier for delivery of curcumin into breast cancer cells. Nanocarrier porous TiO2 is biocompatible and with a high specific surface area and a large pore volume and was used to carry pyranopyrazole, which has been reported as an anti-cancer. Niosome in the outer layer, helpful for loading curcumin into the niosomal layer, demonstrates a pH-dependent release and can be effective for cancer treatment. Entrapment efficiency of curcumin was found at 81.02% in carriers. The results of MTT and flow cytometry revealed that apoptosis is notably enhanced by loading curcumin on pyranopyrazole-TiO2@niosome. Also, there was high biocompatibility with MCF-10A, while exhibiting significant anti-cancer and anti-metastatic effects on MCF-7, whose cell viability was 38.79% in the loaded curcumin on carrier and was more than other samples even, than free curcumin (42.82%). Furthermore, the regulation of gene expression in cancer cells decreased the regulation of MMP-2 and MMP-9 genes and increased the expression of caspase-3 and caspase-9 genes. Finally, fluorescence activity in MCF-7 significantly increased after treatment with samples.

Facile one-pot hydrothermal synthesis of a zinc oxide/curcumin nanocomposite with enhanced toxic activity against breast cancer cells

Zinc oxide/Curcumin (Zn(CUR)O) nanocomposites were prepared via hydrothermal treatment of Zn(NO3)2 in the presence of hexamethylenetetramine as a stabilizing agent and CUR as a bioactive element. Three ZnO : CUR ratios were investigated, namely 57 : 43 (Zn(CUR)O-A), 60 : 40 (Zn(CUR)O-B) and 81 : 19 (Zn(CUR)O-C), as assessed by thermogravimetric analyses, with an average hydrodynamic diameter of nanoaggregates in the range of 223 to 361 nm. The interaction of CUR with ZnO via hydroxyl and ketoenol groups (as proved by X-ray photoelectron spectroscopy analyses) was found to significantly modify the key properties of ZnO nanoparticles with the obtainment of a bilobed shape (as shown by scanning electron microscopy), and influenced the growth process of the composite nanoparticles as indicated by the varying particle sizes determined by powder X-ray diffraction. The efficacy of Zn(CUR)O as anticancer agents was evaluated on MCF-7 and MDA-MB-231 cancer cells, obtaining a synergistic activity with a cell viability depending on the CUR amount within the nanocomposite. Finally, the determination of reactive oxygen species production in the presence of Zn(CUR)O was used as a preliminary evaluation of the mechanism of action of the nanocomposites.

Hybrid nanomaterial composed of chitosan, curcumin, ZnO and TiO2 for antibacterial therapies

Metal nanoparticles have been tremendously utilised, such as; antibacterial and anticancer agents. Although metal nanoparticles exhibits antibacterial and anticancer activity, but the drawback of toxicity on normal cells limits their clinical applications. Therefore, improving the bioactivity of hybrid nanomaterials (HNMs) and minimizing toxicity is of paramount importance for biomedical applications. Herein, a facile and simple double precipitation method was used to develop biocompatible and multifunctional HNM from antimicrobial chitosan, curcumin, ZnO and TiO₂. In HNM, biomolecules chitosan and curcumin were used to control the toxicity of ZnO and TiO₂ and improve their biocidal properties. The cytotxicological properties of the HNM was studied against human breast cancer (MDA-MB-231) and fibroblast (L929) cell lines. The antimicrobial activity of the HNM was examined against Escherichia coli and Staphylococcus aureus bacteria, via the well-diffusion method. In addition, the antioxidant property was evaluated by the radical scavenging method. These findings actively, support the ZTCC HNMs potential, as an innovative biocidal agent for applications in the clinical and healthcare sectors.

Multifunctional nanocarriers of Fe3O4@PLA-PEG/curcumin for MRI, magnetic hyperthermia and drug delivery

Background: Despite medicinal advances, cancer is still a big problem requiring better diagnostic and treatment tools. Magnetic nanoparticle (MNP)-based nanosystems for multiple-purpose applications were developed for these unmet needs. Methods: This study fabricated novel trifunctional MNPs of Fe₃O₄@PLA-PEG for drug release, MRI and magnetic fluid hyperthermia. Result: The MNPs provided a significant loading of curcumin (∼11%) with controllable release ability, a high specific absorption rate of 82.2 W/g and significantly increased transverse relaxivity (r₂ = 364.75 mM^-1 s^-1). The in vivo study confirmed that the MNPs enhanced MRI contrast in tumor observation and low-field magnetic fluid hyperthermia could effectively reduce the tumor size in mice bearing sarcoma 180. Conclusion: The nanocarrier has potential for drug release, cancer treatment monitoring and therapy.

Inorganic Nanocarriers: Surface Functionalization, Delivery Utility for Natural Therapeutics - A Review

Inorganic nanocarriers for a decade have increased interest in nanotechnology research platform as versatile drug delivery materials. The utility of the inorganic nanocarriers for delivery of therapeutic agents is attributed to their unique properties such as magnetic, photocatalytic nature and the ability to exhibit surface functionalization. Herein, we review the surface functionalization and delivery utility for natural therapeutics exhibited by inorganic nanocarriers mostly focusing on their magnetic, photocatalytic and the plasmonic properties. The review also highlights the influence of electronic property of inorganic surface on functionalization of ligand based natural therapeutic agents. Improvement of stability and therapeutic potential by formation of nanocomposites are detailed. Furthermore, we suggest improvement strategies for stability and toxicity reduction of inorganic nanoparticles that would potentially make them useful for clinical application as therapeutic delivery tools for treatment of various diseases.

Bioactive Compounds from the Zingiberaceae Family with Known Antioxidant Activities for Possible Therapeutic Uses

The Zingiberaceae family is a rich source of diverse bioactive phytochemicals. It comprises about 52 genera and 1300 species of aromatic flowering perennial herbs with characteristic creeping horizontal or tuberous rhizomes. Notable members of this family include ginger (Zingiber officinale Roscoe), turmeric (Curcuma longa L.), Javanese ginger (Curcuma zanthorrhiza Roxb.), and Thai ginger (Alpinia galanga L.). This review focuses on two main classes of bioactive compounds: the gingerols (and their derivatives) and the curcuminoids. These compounds are known for their antioxidant activity against several maladies. We highlight the centrality of their antioxidant activities with notable biological activities, including anti-inflammatory, antidiabetic, hepatoprotective, neuroprotective, antimicrobial, and anticancer effects. We also outline various strategies that have been applied to enhance these activities and make suggestions for research areas that require attention.

Inhibition of Staphylococcus aureus α-Hemolysin Production Using Nanocurcumin Capped Au@ZnO Nanocomposite

Nanoparticles of gold with zinc oxide (Au@ZnO NPs) were prepared by laser ablation and then capped with curcumin nanoparticles (Cur-Au@ZnO NPs). The synthesized NPs were characterized using different techniques, including transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), UV-visible spectroscopy, and X-ray diffraction. In addition, the ability of NPs as a promising antibacterial agent was tested against Staphylococcus aureus through the agar well diffusion method and AO/EtBr staining assay. The results showed that the prepared nanoparticles (Cur-Au@ZnO) served as an antibacterial agent and can destroy the bacterial cells by losing the cell wall integrity and penetrating the cytoplasmic membrane. Moreover, the findings confirmed the role of the formed NPs in attenuation of the adherence and invasion of S. aureus to rat embryonic fibroblast (REF) cells. Furthermore, the activity of Cur-Au@ZnO NPs against the S. aureus α-hemolysin toxin was evaluated using the western blot technique, using human alveolar epithelial cells (A549), and through histopathology examination in a mouse model. In conclusion, the built Cur-Au@ZnO NPs can be used as a potential antibacterial agent and an inhibitor of α-hemolysin toxin secreted by S. aureus. These NPs may offer a new strategy in combating pathogen infections and in the future for biomedical and pharmaceutical applications.

Antimicrobial Potential of Curcumin: Therapeutic Potential and Challenges to Clinical Applications

Curcumin is a bioactive compound that is extracted from Curcuma longa and that is known for its antimicrobial properties. Curcuminoids are the main constituents of curcumin that exhibit antioxidant properties. It has a broad spectrum of antibacterial actions against a wide range of bacteria, even those resistant to antibiotics. Curcumin has been shown to be effective against the microorganisms that are responsible for surgical infections and implant-related bone infections, primarily Staphylococcus aureus and Escherichia coli. The efficacy of curcumin against Helicobacter pylori and Mycobacterium tuberculosis, alone or in combination with other classic antibiotics, is one of its most promising antibacterial effects. Curcumin is known to have antifungal action against numerous fungi that are responsible for a variety of infections, including dermatophytosis. Candidemia and candidiasis caused by Candida species have also been reported to be treated using curcumin. Life-threatening diseases and infections caused by viruses can be counteracted by curcumin, recognizing its antiviral potential. In combination therapy with other phytochemicals, curcumin shows synergistic effects, and this approach appears to be suitable for the eradication of antibiotic-resistant microbes and promising for achieving co-loaded antimicrobial pro-regenerative coatings for orthopedic implant biomaterials. Poor water solubility, low bioavailability, and rapid degradation are the main disadvantages of curcumin. The use of nanotechnologies for the delivery of curcumin could increase the prospects for its clinical application, mainly in orthopedics and other surgical scenarios. Curcumin-loaded nanoparticles revealed antimicrobial properties against S. aureus in periprosthetic joint infections.

Curcumin Nanoparticles as Promising Therapeutic Agents for Drug Targets

Curcuma longa is very well-known medicinal plant not only in the Asian hemisphere but also known across the globe for its therapeutic and medicinal benefits. The active moiety of Curcuma longa is curcumin and has gained importance in various treatments of various disorders such as antibacterial, antiprotozoal, cancer, obesity, diabetics and wound healing applications. Several techniques had been exploited as reported by researchers for increasing the therapeutic potential and its pharmacological activity. Here, the dictum is the new room for the development of physicochemical, as well as biological, studies for the efficacy in target specificity. Here, we discussed nanoformulation techniques, which lend support to upgrade the characters to the curcumin such as enhancing bioavailability, increasing solubility, modifying metabolisms, and target specificity, prolonged circulation, enhanced permeation. Our manuscript tried to seek the attention of the researcher by framing some solutions of some existing troubleshoots of this bioactive component for enhanced applications and making the formulations feasible at an industrial production scale. This manuscript focuses on recent inventions as well, which can further be implemented at the community level.

Nanomaterials as drug delivery systems with antibacterial properties: current trends and future priorities

Introduction:Despite extensive advances in the production and synthesis of antibiotics, infectious diseases are one of the main problems of the 21st century due to multidrug-resistant (MDR) distributing in organisms. Therefore, researchers in nanotechnology have focused on new strategies to formulate and synthesis the different types of nanoparticles (NPs) with antimicrobial properties.Areas covered:The present review focuses on nanoparticles which are divided into two groups, organic (micelles, liposomes, polymer-based and lipid-based NPs) and inorganic (metals and metal oxides). NPs can penetrate the cell wall then destroy permeability of cell membrane, the structure and function of cell macromolecules by producing of reactive oxygen species (ROS) and eventually kill the bacteria. Moreover, their characteristics and mechanism in various bacteria especially MDR bacteria and finally their biocompatibility and the factors affecting their activity have been discussed.Expert opinion:Nanotechnology has led to higher drug absorption, targeted drug delivery and fewer side effects. NPs can overcome MDR through affecting several targets in the bacteria cell and synergistically increase the effectiveness of current antibiotics. Moreover, organic NPs with regard to their biodegradability and biocompatibility characteristics can be suitable agents for medical applications. However, they are less stable in environment in comparison to inorganic NPs.

Development of a cellulose-based scaffold for sustained delivery of curcumin

Due to the unique properties of cellulose-based materials, they are attractive to be developed in industrial pharmaceutics and biomedical fields. Carboxymethyl-diethyl amino ethyl cellulose scaffold (CM-DEAEC) has been synthesized in the current work as a smart novel derivative of cellulose with a great functionality in drug delivery systems. The scaffolds were well cross-linked with 2% (v/v) epichlorohydrin (ECH), loaded with curcumin (Cur), and then were analyzed by FT-IR, XRD, SEM, and mechanical strength. While developing the ideal delivery platform, curcumin (an important chemotherapeutic agent) was chosen due to its hydrophobicity and poor bioavailability. Thus, we developed a novel scaffold for efficient loading and controlled releasing of curcumin. The swelling ratio of 136%, high curcumin entrapment efficiency (up to 83.7%), sustained in vitro drug release profile, and appropriate degradability in three weeks confirmed significant properties of the CM-DEAEC scaffold. More than 99% antibacterial activity has been observed by the cross-linked curcumin loaded CM-DEAEC scaffolds. Cytotoxicity studies using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and 4',6-diamidino-2-phenylindole (DAPI) staining showed that cross-inked curcumin loaded CM-DEAEC scaffolds did not show any toxicity using L929 cells. All experiments were compared with CMC scaffolds and better characteristics of the novel scaffold for drug delivery have been confirmed.

Current Trends in Drug Delivery System of Curcumin and its Therapeutic Applications

Curcumin is a poly phenolic compound extracted from turmeric. Over the past years, it has acquired significant interest among researchers due to its numerous pharmacological activities like anti- cancer, anti-alzheimer, anti-diabetic, anti-bacterial, anti-inflammatory and so on. However, the clinical use of curcumin is still obstructed due to tremendously poor bioavailability, rapid metabolism, lower gastrointestinal absorption, and low permeability through cell that makes its pharmacology thrilling. These issues have led to enormous surge of investigation to develop curcumin nano formulations which can overcome these restrictive causes. The scientists all across the universe are working on designing several drug delivery systems viz. liposomes, micelles, magnetic nano carriers, etc. for curcumin and its composites which not only improve its physiochemical properties but also enhanced its therapeutic applications. The review aims to systematically examine the treasure of information about the medicinal use of curcumin. This article delivers a general idea of the current study piloted to overwhelm the complications with the bioavailability of curcumin which have exhibited an enhanced biological activity than curcumin. This article explains the latest and detailed study of curcumin and its conjugates, its phytochemistry and biological perspectives and also proved curcumin as an efficient drug candidate for the treatment of numerous diseases. Recent advancements and futuristic viewpoints are also deliberated, which shall help researchers and foster commercial translations of improved nanosized curcumin combination for the treatment of various diseases.

Curcumin Nanoformulations with Metal Oxide Nanomaterials for Biomedical Applications

In the past few decades, curcumin, a natural polyphenolic phytochemical, has been studied for treating a wide variety of diseases. It has shown promising results as a potential curative agent for a variety of diseases. However, its inherent limitations, such as poor aqueous solubility, poor absorbability, fast metabolic rate, and quick elimination from the body, have limited its application beyond preclinical studies. A huge number of studies have been made to address the issues of curcumin and to maximally utilize its potentials. Many review articles have tried to assess and summarize different nanocarriers, especially organic nanocarriers, for nanoformulations with curcumin. Nevertheless, few exclusive reviews on the progress in nanoformulation of curcumin with inorganic nanomaterials have been made. In this review, we present an exclusive summary of the progress in nanoformulation of curcumin with metal oxide nanoparticles. The beneficial feature of the metal oxide nanoparticles used in the curcumin nanoformulation, the different approaches followed in formulating curcumin with the metal oxides, and the corresponding results, protective effect of curcumin from different metal oxide caused toxicities, and concluding remarks are presented in the review.

Carboxymethyl cellulose-based materials for infection control and wound healing: A review

The development of ideal wound dressing materials with excellent characteristics is currently a major demand in wound therapy. In recent years, carboxymethyl cellulose (CMC)-based wound dressing materials have been of immense attraction due to their noble properties, such as: biocompatibility, biodegradability, tissue resembling, low cost and non-toxic. It is used extensively, in a variety of applications in the biomedical and pharmaceutical fields. The hydrophilic nature of CMC, makes it possible to blend and cross-link with other materials, such as: synthetic polymers, natural polymers and inorganic materials and it enables the preparation of innovative wound dressing biomaterials. Hence, this review, focuses on the intrinsic characteristics of CMC-based wound dressing materials, including hydrogels, films, 3D printing, fibres, gauzes and their recent advancements in chronic wound healing.

Green synthesis, characterization and biological evaluation of chitin glucan based zinc oxide nanoparticles and its curcumin conjugation

A well-organized, simplistic, and green route of chitin-glucan based zinc oxide nanoparticles (ChGC@ZnONPs) was synthesized using reducing and capping agent both in one as chitin-glucan complex (ChGC). Herein we report the bio-synthesis of Cur-ChGC@ZnONPs by the conjugation of curcumin (Cur) with ChGC@ZnONPs for the improvement of antioxidant and antibacterial activity. The synthesized nanoparticles were characterized by the UV-Visible (UV-Vis), particle size analyser, scanning electron microscope (SEM) with Energy-dispersive X-ray spectroscopy (EDX), Transmission electron microscope (TEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). Structure analysis, shape and crystalline size of nanomaterials were confirmed by scanning electron microscopy (SEM) and Transmission Electron Microscopy (TEM). The particle size analyser showed the particle size of nanomaterials and stability. Crystalline nature of both ChGC@ZnONPs and Cur-ChGC@ZnONPs were confirmed by the XRD spectra and FT-IR spectrum was used to examine the functional groups of nanomaterials. The antioxidant potential of conjugated nanomaterials were estimated using a DPPH free radical scavenging assay and ABTS^+⁎ assay. This analysis showed that after loading of Cur, antioxidant activity increases. The antibacterial assessment of conjugated nanomaterials were tested by different microorganisms and showed excellent antibacterial activity.

Anti-microbial activity of curcumin nanoformulations: New trends and future perspectives

Curcumin has been used in numerous anti-microbial research because of its low side effects and extensive traditional applications. Despite having a wide range of effects, the intrinsic physicochemical characteristics such as low bioavailability, poor water solubility, photodegradation, chemical instability, short half-life and fast metabolism of curcumin derivatives limit their pharmaceutical importance. To overcome these drawbacks and improve the therapeutic ability of curcuminoids, novel approaches have been attempted recently. Nanoparticulate drug delivery systems can increase the efficiency of curcumin in several diseases, especially infectious diseases. These innovative strategies include polymeric nanoparticles, hydrogels, nanoemulsion, nanocomposite, nanofibers, liposome, nanostructured lipid carriers (NLCs), polymeric micelles, quantum dots, polymeric blend films and nanomaterial-based combination of curcumin with other anti-bacterial agents. Integration of curcumin in these delivery systems has displayed to improve their solubility, bioavailability, transmembrane permeability, prolong plasma half-life, long-term stability, target-specific delivery and upgraded the therapeutic effects. In this review paper, a range of in vitro and in vivo studies have been critically discussed to explore the therapeutic viability and pharmaceutical significance of the nano-formulated delivery systems to elevate the anti-bacterial activities of curcumin and its derivatives.