Selective shape control of cerium oxide nanocrystals for photocatalytic and chemical sensing effect

Selective oxidation of methane to C2+ products over Au-CeO2 by photon-phonon co-driven catalysis

Direct methane conversion to high-value chemicals under mild conditions is attractive yet challenging due to the inertness of methane and the high reactivity of valuable products. This work presents an efficient and selective strategy to achieve direct methane conversion through the oxidative coupling of methane over a visible-responsive Au-loaded CeO2 by photon-phonon co-driven catalysis. A record-high ethane yield of 755 μmol h-1 (15,100 μmol g-1 h-1) and selectivity of 93% are achieved under optimised reaction conditions, corresponding to an apparent quantum efficiency of 12% at 365 nm. Moreover, the high activity of the photocatalyst can be maintained for at least 120 h without noticeable decay. The pre-treatment of the catalyst at relatively high temperatures introduces oxygen vacancies, which improves oxygen adsorption and activation. Furthermore, Au, serving as a hole acceptor, facilitates charge separation, inhibits overoxidation and promotes the C-C coupling reaction. All these enhance photon efficiency and product yield.

Ceria nanocatalyst-supported oxidative organic transformations of aromatic alcohols andp-nitrotoluene

Hydrothermally derived nanocubes of CeO2(10 nm) were explored as an efficient heterogeneous catalyst in the partial oxidation of aromatic alcohols to the corresponding aldehydes and aerobic oxidation ofp-nitrotoluene top-nitrobenzoic acid. The CeO2nanocatalyst was characterized by x-ray diffraction, transmission electron microscopy (TEM), energy dispersive spectroscopy, x-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) surface area analysis, Fourier transform infrared spectroscopy, thermal gravimetric analysis and ultraviolet-visible spectroscopy. TEM/high-resolution TEM micrographs reveal a morphology of mostly cubic nanostructures with exposed highly active {100} and {110} facets. The surface area of nanoceria was determined by BET analysis and found to be 33.8 m2g-1. To demonstrate the universality of the catalytic system, the selective oxidation of different substrates of benzylic alcohol and complete oxidation ofp-nitrotoluene was investigated under mild conditions. Absolute selectivity towards their respective aldehydes was found to be 99.50% (benzaldehyde), 90.18% (p-chlorobenzaldehyde), 99.71% (p-nitrobenzaldehyde), 98.10% (p-fluorobenzaldehyde), 94.66% (p-anisaldehyde) and 86.14% (cinnamaldehyde). Moreover, the catalytic oxidative transformation of nitrotoluene results in 100% conversion with 99.29% selectivity towards nitrobenzoic acid.

Solanum tuberosum tuber-driven starch-mediated green-hydrothermal synthesis of cerium oxide nanoparticles for efficient photocatalysis and antimicrobial activities

In this study, we are reporting for the first time the utilization of Solanum tuberosum tuber-driven, starch-mediated, green-hydrothermally synthesized cerium oxide nanoparticles (G-CeO2 NPs) for the antibacterial activity and photodegradation of cationic (methylene blue, MB) and anionic (methyl orange, MO) dyes separately and in combination, aimed at environmental remediation. The XRD analysis confirms the fluorite structure of G-CeO2 NPs, displaying an average crystallite size of 9.6 nm. Further, XPS confirms the existence of 24% of Ce3+ oxidation states within G-CeO2 NPs. Morphological studies through FE-SEM and TEM reveal that starch-driven OH- ion production leads to a high percentage of active crystal facets, favoring the formation of Ce3+-rich CeO2 NPs. Photocatalytic experiments conducted under UV-A illumination demonstrate the superior degradation performance of G-CeO2 NPs, with MB degradation reaching 93.4% and MO degradation at 77.2% within 90 min. This outstanding catalytic activity is attributed to the mesoporous structure (pore diameter of 5.63 nm) with a narrow band gap, a large surface area (103.38 m2g-1), and reduced charge recombination, as validated by BET, UV-visible, and electrochemical investigations. The identification of photogenerated intermediates is achieved through LCMS, while the mineralization is monitored via total organic carbon analysis. Moreover, the scavenging experiments point towards the involvement of reactive oxygen species in organic oxidation, demonstrating efficiency over five consecutive trials. Additionally, G-CeO2 NPs exhibit potent antibacterial activity against both gram-positive and gram-negative bacteria. This study presents an innovative, and efficient approach to environmental remediation, shedding light on the potential of G-CeO2 NPs in addressing environmental pollution challenges.

Ultrasmall cerium oxide nanoparticles as highly sensitive X-ray contrast agents and their antioxidant effect

Owing to their theranostic properties, cerium oxide (CeO2) nanoparticles have attracted considerable attention for their key applications in nanomedicine. In this study, ultrasmall CeO2 nanoparticles (particle diameter = 1-3 nm) as X-ray contrast agents with an antioxidant effect were investigated for the first time. The nanoparticles were coated with hydrophilic and biocompatible poly(acrylic acid) (PAA) and poly(acrylic acid-co-maleic acid) (PAAMA) to ensure satisfactory colloidal stability in aqueous media and low cellular toxicity. The synthesized nanoparticles were characterized using high-resolution transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, thermogravimetric analysis, dynamic light scattering, cell viability assay, photoluminescence spectroscopy, and X-ray computed tomography (CT). Their potential as X-ray contrast agents was demonstrated by measuring phantom images and in vivo CT images in mice injected intravenously and intraperitoneally. The X-ray attenuation of these nanoparticles was greater than that of the commercial X-ray contrast agent Ultravist and those of larger CeO2 nanoparticles reported previously. In addition, they exhibited an antioxidant effect for the removal of hydrogen peroxide. The results confirmed that the PAA- and PAAMA-coated ultrasmall CeO2 nanoparticles demonstrate potential as highly sensitive radioprotective or theranostic X-ray contrast agents.

Biosynthesis of phyto functionalized cerium oxide nanoparticles mediated from Scoparia dulsis L. for appraisal of anti-cancer potential against adenocarcinomic lung cancer cells and paracetamol sensing potentiality

This research work aims at the eco-friendly preparation of cerium oxide nanoparticles (CeSD NPs) utilizing the natural extract of Scoparia dulsis L. An attempt was made to analyze the influence of the fuel load on the size, shape, and optical properties of the nanoparticles. The p-XRD studies revealed the controlled formation of NPs with a size not more than 12.74 nm. The surface area studies appraise the mesoporous nature of the synthesized ceria particles, with the maximum specific surface area of 36.06 m²g^-1. The nano-regime CeO₂ nanoparticles had a definite impact on biomedical and electrochemical studies. The CeSD NPs with minuscule size (10.69 nm) manifested promising antioxidant and human RBC protection activity. The antioxidant properties were evaluated using % DPPH inhibition with of maximum of 83.38. The stabilization of RBC's by CeSD NPs was maximum at 94.97%. However, the CeSD NPs with apparent size (12.74 nm) that utilized greater volume fuel (25 mL) had noticeable results on adenocarcinomic lung (A549) cancer cell viability and antidiabetic study which was maximum of 70.16% at concentration 500 μg/mL. A satisfactory antibacterial application was proffered against chosen bacterial stains. The smallest size CeO₂ NPs exhibited the best proton diffusion coefficient (8.16 × 10^-6 cm²s^-1), and the capacitance values of the CeSD NPs are near in all samples (~ 1.17 to 2.00 F) manifest their compact nano-regime sizes. The paracetamol drug was chosen as analyte to appreciating the superlative efficiency for sensing paracetamol drug with the lowest detection limit.

Fluoride-assisted detection of glutathione by surface Ce3+/Ce4+ engineered nanoceria

Nanoceria has evolved as a promising nanomaterial due to its unique enzyme-like properties, including excellent oxidase mimetic activity, which significantly increases in the presence of fluoride ions. However, this significant increase in oxidase activity has never been utilised as a signal enhancer for the detection of biological analytes partly because of the lack of understanding of the mechanism involved in this process. In this study, we show that the surface oxidation state of cerium ions plays a very crucial role in different enzymatic activities, especially the oxidase mimetic activity by engineering nanoceria with three different surface Ce⁴⁺/Ce³⁺ compositions. Using DFT calculations combined with Bader charge analysis, it is demonstrated that stoichiometric ceria registers a higher oxidase mimetic activity than oxygen-deficient ceria with a low Ce⁴⁺/Ce³⁺ ratio due to a higher charge transfer from a substrate, 3,3',5,5' tetramethylbenzidine (TMB), to the ceria surface. We also show that the fluoride ions can significantly increase the charge transfer from the TMB surface to ceria irrespective of the surface Ce⁴⁺/Ce³⁺ ratio. Using this knowledge, we first compare the fluoride sensing properties of nanoceria with high Ce⁴⁺ and mixed Ce⁴⁺/Ce³⁺ oxidation states and further demonstrate that the linear detection range of fluoride ions can be extended to 1-10 ppm for nanoceria with mixed oxidation states. Then, we also demonstrate an assay for fluoride assisted detection of glutathione, an antioxidant with elevated levels during cancer, using nanoceria with a high surface Ce⁴⁺/Ce³⁺ ratio. The addition of fluoride ions in this assay allows the detection of glutathione in the linear range of 2.5-50 ppm with a limit of detection (LOD) of 3.8 ppm. These studies not only underpin the role of the surface Ce⁴⁺/Ce³⁺ ratio in tuning the fluoride assisted boost in the oxidase mimetic activity of nanoceria but also its strategic application in designing better colourimetric assays.

Cerium Oxide Nanorods Synthesized by Dalbergia sissoo Extract for Antioxidant, Cytotoxicity, and Photocatalytic Applications

In this study, cerium oxide nanorods (CeO₂-NRs) were synthesized by using the phytochemicals present in the Dalbergia sissoo extract. The physiochemical characteristics of the as-prepared CeO₂-NRs were investigated by using ultraviolet-visible spectroscopy (UV-VIS), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction analysis (XRD). The SEM and UV-VIS analyses revealed that the acquired nanomaterials possessed a rod-like morphology while the XRD results further confirmed that the synthesized NRs exhibited a cubic crystal lattice system. The antioxidant capacity of the synthesized CeO₂-NRs was investigated by using several in vitro biochemical assays. It was observed that the synthesized NRs exhibited better antioxidant potential in comparison to the industrial antioxidant of the butylated hydroxyanisole (BHA) in 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. The biochemical assays, including lipid peroxidation (LPO), total antioxidant capacity (TAC), and catalase activity (CAT), were also performed in the human lymphocytes incubated with the CeO₂-NRs to investigate the impact of the NRs on these oxidative biomarkers. Enhanced reductive capabilities were observed in all the assays, revealing that the NRs possess excellent antioxidant properties. Moreover, the cytotoxic potential of the CeO₂-NRs was also investigated with the MTT assay. The CeO₂-NRs were found to effectively kill off the cancerous cells (MCF-7 human breast cancer cell line), further indicating that the synthesized NRs exhibit anticancer potential as well. One of the major applications studied for the prepared CeO₂-NRs was performing the statistical optimization of the photocatalytic degradation reaction of the methyl orange (MO) dye. The reaction was optimized by using the technique of response surface methodology (RSM). This advanced approach facilitates the development of the predictive model on the basis of central composite design (CCD) for this degradation reaction. The maximum degradation of 99.31% was achieved at the experimental optimized conditions, which corresponded rather well with the predicted percentage degradation values of 99.58%. These results indicate that the developed predictive model can effectively explain the performed experimental reaction. To conclude, the CeO₂-NRs exhibited excellent results for multiple applications.

Electrochemical detection of hydrogen peroxide using micro and nanoporous CeO2 catalysts

In this research work, focus has been made on a glassy carbon electrode (GCE) modified commercial micro and synthesized nano-CeO₂ for the detection of hydrogen peroxide (H₂O₂). Firstly, CeO₂ nanoleaves were prepared by solvothermal route. Both commercially available micro CeO₂ and synthesized nano-CeO₂ structures were analyzed by different characterization techniques. The Raman spectra of synthesized nano CeO₂ has more oxygen vacancies than micro CeO₂. SEM images revealed that the synthesized CeO₂ acquired leaf-like morphology. The catalyst nano CeO₂ offered mesoporosity from nitrogen adsorption-desorption isotherms with massive sites of activation for increasing efficiency. Experiments on determining H₂O₂ using micro CeO₂ or nano-CeO₂/GCE was conducted using cyclic voltammetry (CV) and amperometry. Enhanced H₂O₂ reduction peak current with lower potential was observed in nano-CeO₂/GCE. The influence of scan rate and H₂O₂ concentration on the performance of nano-CeO₂/GCE were also studied. The obtained results have indicated that nano-CeO₂/GCE showed improved electrochemical sensing behavior towards the reduction of H₂O₂ than micro-CeO₂/GCE and bare GCE. A linear relationship was obtained over 0.001 μM-0.125 μM concentration of H₂O₂, with good sensitivity 141.96 μA μM^-1 and low detection limit of 0.4 nM. Hence, the present nano-CeO₂ system will have a great potential with solvothermal synthesis approach in the development of electrochemical sensors.

Surface-Coated Cerium Nanoparticles to Improve Chemotherapeutic Delivery to Tumor Cells

The antioxidant property of cerium oxide nanoparticles has increased their demand as a nanocarrier to improve the delivery and therapeutic efficacy of anticancer drugs. Here, we report the synthesis of alginate-coated ceria nanoformulations (ceria NPs) and characterization using FTIR spectroscopy, Raman microscopy, and X-ray diffraction. The synthesized ceria NPs show negligible inherent in vitro toxicity when tested on a MDA-MB-231 breast cancer cell line at higher particle concentrations. Upon loading these particles with doxorubicin (Dox) and paclitaxel (PTX) drugs, we observe a potential synergistic cytotoxic effect mediated by the drug and the ceria NPs, resulting in the better killing capacity as well as suppression of cell migration against the MDA-MB-231 cell line. Further, to verify the immune-escaping capacity before targeting cancer cells, we coated the drug-loaded ceria NPs with the membrane of MDA-MB-231 cells using an extrusion method. The resultant delivery system exhibited in vitro preferential uptake by the MDA-MB-231 cell line and showed reduced uptake by the murine macrophage cell line (RAW 264.7), assigning its potential application as non-immunogenic personalized therapy in targeting and killing of cancer cells.

Tuning the enzyme-like activities of cerium oxide nanoparticles using triethyl phosphite ligand

Cerium oxide nanoparticles (CeNPs) depict excellent in vitro and in vivo antioxidant properties, determined by the redox switching of surface cerium ions between its two oxidation states (Ce3+ and Ce4+)....

Surface and morphology analyses, and voltammetry studies for electrochemical determination of cerium(iii) using a graphene nanobud-modified-carbon felt electrode in acidic buffer solution (pH 4.0 ± 0.05)

Trace determination of radioactive waste, especially Ce3+, by electrochemical methods has rarely been attempted. Ce3+ is (i) a fluorescence quencher, (ii) an antiferromagnet, and (iii) a superconductor, and it has been incorporated into fast scintillators, LED phosphors, and fluorescent lamps. Although Ce3+ has been utilized in many industries due to its specific properties, it causes severe health problems to human beings because of its toxicity. Nanomaterials with fascinating electrical properties can play a vital role in the fabrication of a sensor device to detect the analyte of interest. In the present study, surfactant-free 1,8-diaminonaphthalene (DAN)-functionalized graphene quantum dots (DAN-GQDs) with nanobud (NB) morphology were utilized for the determination of Ce3+ through electrochemical studies. The working electrode, graphene nanobud (GNB)-modified-carbon felt (CF), was developed by a simple drop-coating method for the sensitive detection of Ce3+ in acetate buffer solution (ABS, pH 4.0 ± 0.05) at a scan rate of 50 mV s-1 using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. CV and DPV studies validated the existence of distinctive peaks at approximately +0.20 and +0.93 V (vs. SCE), respectively, with a limit of detection of approximately 2.60 μM. Furthermore, electrochemical studies revealed that the GNB-modified-CF electrode was (i) stable even after fifteen cycles, (ii) reproducible, (iii) selective towards Ce3+, (iv) strongly pH-dependent, and (v) favored Ce3+ sensing only at pH 4.0 ± 0.05. Impedance spectroscopy results indicated that the GNB-modified-CF electrode was more conductive (1.38 × 10-4 S m-1) and exhibited more rapid electron transfer than bare CF, which agrees with the attained Randles equivalent circuit. Microscopy (AFM, FE-SEM, and HR-TEM), spectroscopy (XPS and Raman), XRD, and energy-dispersive X-ray (EDX) analyses of the GNB-modified-CF electrode confirmed the adsorption of Ce3+ onto the electrode surface and the size of the electrode material. Ce3+ nanobuds increased from 35-40 to 50-55 nm without changing their morphology. The obtained results provide an insight into the determination of Ce3+ to develop an electrochemical device with low sensitivity.