Coordinating gallium hexacyanocobaltate: Prussian blue-based nanomaterial for Li-ion storage

Prussian Blue-Type Sodium-ion Conducting Solid Electrolytes for All Solid-State Batteries

Conventional solid electrolyte frameworks typically consist of anions such as sulphur, oxygen, chlorine, and others, leading to inherent limitations in their properties. Despite the emergence of sulphide, oxide, and halide-based solid electrolytes for all-solid-state batteries, their utilization is hampered by issues, including the evolution of H2 S gas, the need for expensive elements, and poor contact. Here, we first introduce Prussian Blue analogue (PBA) open-framework structures as a solid electrolyte that demonstrates appreciable Na+ conductivity (>10-2 mS cm-1 ). We delve into the relationship between Na+ conductivity and the lattice parameter of N-coordinated transition metal, which is attributed to the reduced interaction between Na+ and the framework, corroborated by the distribution of relaxation times and density functional theory calculations. Among the five PBAs studied, Mn-PBA have exhibited the highest Na+ conductivity of 9.1×10-2 mS cm-1 . Feasibility tests have revealed that Mn-PBA have maintained a cycle retention of 95.1 % after 80cycles at 30 °C and a C-rate of 0.2C. Our investigation into the underlying mechanisms that play a significant role in governing the conductivity and kinetics of these materials contributes valuable insights for the development of alternative strategies to realize all-solid-state batteries.

Effect of Static Jahn-Teller Distortion on the Li+ Transport in a Copper Hexacyanoferrate Framework

Prussian blue (PB) and its analogues (PBAs) are potential cathode-active materials for rechargeable lithium-ion batteries. Although a body of research has assessed the performances of various PB/PBA cathodes with an eye to practical use, the underlying Li⁺-transport mechanism is still unclear. Focusing on copper hexacyanoferrate (CuHCF), a PBA that exhibits static Jahn-Teller (JT) distortion, we theoretically investigate how the framework's distortion affects the pathways and energetics of the Li⁺ transport. Density functional theory calculations of a local structure model of CuHCF reveal that the static JT distortion makes the favorable Li⁺-transport pathways quasi-two-dimensional, contrary to an intuitive picture of isotropic Li⁺ diffusion within the regular jungle-gym framework. The pathways are mutually interconnected, thereby creating an almost barrierless transport network. To better understand the distortion-induced transport anisotropy, we visually analyze the framework's electronic structure and noncovalent Li⁺-framework interactions. This study helps deepen the fundamental understanding of intrinsic Li⁺-transport properties of a distorted porous framework.

Metal organic framework-based nanostructure materials: applications for non-lithium ion battery electrodes

Non-lithium ion (e.g., Al3+, Ca2+, K+, Mg2+, Na+, and Zn2+) batteries have emerged as a promising platform for next-generation energy storage systems.

Covalent Organic Frameworks: Emerging Organic Solid Materials for Energy and Electrochemical Applications

Covalent organic frameworks (COFs), materials constructed from organic building blocks joined by robust covalent bonds, have emerged as attractive materials in the context of electrochemical applications because of their high, intrinsic porosities and crystalline frameworks, as well as their ability to be tuned across two- and three-dimensions by the judicious selection of building blocks. Because of the recent and rapid development of this field, we have summarized COFs employed for electrochemical applications, such as batteries and capacitors, water splitting, solar cells, and sensors, with an emphasis on the structural design and resulting performance of the targeted electrochemical system. Overall, we anticipate this review will stimulate the design and synthesis of the next generation of COFs for use in electrochemical applications and beyond.

Electrochemical activity of Samarium on starch-derived porous carbon: rechargeable Li- and Al-ion batteries

Rechargeable metal-ion batteries are considered promising electric storage systems to meet the emerging demand from electric vehicles, electronics, and electric grids. Thus far, secondary Li-ion batteries (LIBs) have seen great advances in terms of both their energy and their power density. However, safety issues remain a challenge. Therefore, rechargeable Al-ion batteries (AIBs) with a highly reliable safety advantage and active electrochemical performances have gathered intensive attention. However, the common issue for these two metal-ion batteries is the lack of cathode materials. Many advanced electrode materials reported provide greatly enhanced electrochemical properties. However, their inherent disadvantages-such as complicated fabrication procedures, restricted manufacturing parameters, and the requirement of expensive instruments-limits their potential for further applications. In this work, we demonstrate the high electrochemical activity of the lanthanide element, Sm, towards storing charges when used in both LIBs and AIBs. Lanthanide elements are often overlooked; however, they generally have attractive electrochemical properties owing to their unpaired electrons. We employed starch as both a low-cost carbon source and as a three-dimensional support for Sm metal nanoparticles. The composite product is fabricated using a one-pot wet-chemical method, followed by a simultaneous carbonization process. As a result, highly improved electrochemical properties are obtained when it is used as a cathode material for both LIBs and AIBs when compared to bare starch-derived C. Our results may introduce a new avenue toward the design of high-performance electrode materials for LIBs and AIBs.

Enhancement of the electrochemical performance of lithium-ion batteries by SiO2@poly(2-acrylamido-2-methylpropanesulfonic acid) nanosphere addition into a polypropylene membrane

Employing electrostatic self-assembly and free radical polymerization, the surface of SiO₂ nanospheres was coated with poly(2-acrylamido-2-methylpropanesulfonic acid) (SiO₂@PAMPS) bearing strong electron withdrawing sulfonic and amide groups, enhancing the dissociation ability of the lithium salt of the liquid electrolyte and absorbing anions via hydrogen bonds. After SiO₂@PAMPS nanospheres were introduced into the polypropylene (PP) membrane (SiO₂@PAMPS/PP), the electrolyte affinity and electrolyte uptake of the composite separators were significantly improved. The ionic conductivity of SiO₂@PAMPS/PP-18% (where 18% represents the concentration of the solution used for coating) soaked in liquid electrolyte was even 0.728 mS cm^-1 at 30 °C, much higher than that of the pristine PP membrane. The LiFePO₄/Li half-cell with SiO₂@PAMPS/PP-18% had a discharge capacity of 148.10 mA h g^-1 and retained 98.67% of the original capacity even after 120 cycles at 0.5C. Even at a rate of 1.0C, the cell capacity could be maintained above 120 mA h g^-1. Therefore, a coating formula was developed that could considerably improve the cycling ability and high rate charge-discharge performance of lithium ion batteries.

Rendering Redox Reactions of Cathodes in Li-Ion Capacitors Enabled by Lanthanides

Capacitors allow extremely fast charge and discharge operations, which is a challenge faced by recent metal-ion batteries despite having highly improved energy densities. Thus, combined type electric energy storage devices that can integrate high energy density and high power density with high potentials, can overcome the shortcomings of the current metal-ion batteries and capacitors. However, the limited capacities of cathode materials owing to the barren redox reactions are regarded as an obstacle for the development of future high-performance hybrid metal-ion capacitors. In this study, we demonstrate the redox-reaction-rendering effect of the much overlooked lanthanide elements when used as the cathode of lithium-ion capacitors using the mesoporous carbon (MC) as a matrix material. Consequently, these lanthanide elements can effectively enrich the redox reaction, thus improving the capacity of the matrix materials by more than two times. Typically, the Gd-elemental decoration of MC surprisingly enhances the capacity by almost two times as compared with the underacted MC. Furthermore, the La nanoparticles (NPs) decoration depicts the same behavior. Evident redox peaks were formed on the original rectangular cyclic voltammetry (CV) curves. This study provides the first example of embedding lanthanide elements on matrix materials to enrich the desired redox reactions for improving the electrochemical performances.

Carbon and graphene quantum dots: a review on syntheses, characterization, biological and sensing applications for neurotransmitter determination

Neuro-transmitters have been considered to be essential biochemical molecules, which monitor physiological and behavioral function in the peripheral and central nervous systems. Thus, it is of high pharmaceutical and biological significance to analyze neuro-transmitters in the biological samples. So far, researchers have devised a lot of techniques for assaying these samples. It has been found that electro-chemical sensors possess features of robustness, selectivity, and sensitivity as well as real-time measurement. Graphene quantum dots (GQDs) and carbon QDs (CQDs) are considered some of the most promising carbon-based nanomaterials at the forefront of this research area. This is due to their characteristics including lower toxicity, higher solubility in various solvents, great electronic features, strong chemical inertness, high specific surface areas, plenty of edge sites for functionalization, and versatility, in addition to their ability to be modified via absorbent surface chemicals and the addition of modifiers or nano-materials. Hence in the present review, the synthesis methods of GQDs and CQDs has been summarized and their characterization methods also been analyzed. The applications of carbon-based QDs (GQDs and CQDs) in biological and sensing areas, such as biological imaging, drug/gene delivery, antibacterial and antioxidant activity, photoluminescence sensors, electrochemiluminescence sensors and electrochemical sensors, have also been discussed. This study then covers sensing features of key neurotransmitters, including dopamine, tyrosine, epinephrine, norepinephrine, serotonin and acetylcholine. Hence, issues and challenges of the GQDs and CQDs were analyzed for their further development.

Carbon and graphene quantum dots for biological and sensing applications of neurotransmitters.

Developments and applications of nanomaterial-based carbon paste electrodes

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes. Following an introduction into the field, a first large section covers sensors for biological species and pharmaceutical compounds (with subsections on sensors for antioxidants, catecholamines and amino acids). The next section covers sensors for environmental pollutants (with subsections on sensors for pesticides and heavy metal ions). Several tables are presented that give an overview on the wealth of methods (differential pulse voltammetry, square wave voltammetry, amperometry, etc.) and different nanomaterials available. A concluding section summarizes the status, addresses future challenges, and gives an outlook on potential trends.

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes.

Direct electrochemical detection of clozapine by RuO2 nanoparticles-modified screen-printed electrode

This study introduces the sensitive electrochemical detection of clozapine with the use of a ruthenium(iv) oxide nanoparticle (RuO₂ NP)-modified screen-printed electrode (RuO₂ NPs/SPE).

Cerium Hexacyanocobaltate: A Lanthanide-Compliant Prussian Blue Analogue for Li-Ion Storage

Electrode materials are the most significant components of lithium-ion batteries (LIBs) and play an important role in endowing them with high electrochemical performance. The exploration of new electrode materials and their comparative study with contemporary resources will help the design of advanced electrodes. Here, we have synthesized a new type of Prussian blue analogue (cerium(III) hexacyanocobaltate, CeHCCo) and systematically explored the effect of valence states of Fe2+ and Ce3+ on crystal structure and electrochemical properties of final products. We demonstrate that the unbalanced charge in iron(II) hexacyanocobaltate (FeHCCo), as opposed to that in CeHCCo, results in more residual K+ ions, thereby leading to the occupancy of cavities. As a result, the K+ ion-rich FeHCCo exhibits lower capacities of 55 ± 3 and 15 ± 3 mAh g-1 at 0.1 and 1 A g-1, respectively, compared with the K+ ion-deficient CeHCCo that exhibits capacities of 242 ± 3 and 111 ± 3 mAh g-1 at the same current densities. This work provides a novel contribution for the exploration of new Prussian blue analogues and bestows a newer concept for electrode material design.