Renewable 4-HIF/NaOH aerogel for efficient methylene blue removal via cation–π interaction induced electrostatic interaction

Harnessing synergy: Polydopamine-hBN integration in electrospun nanofibers for Co (II) ion, methylene blue and crystal violet dyes adsorption

In today's world, major pollutants, such as cationic dyes and heavy metals, pose a serious threat to human health and the environment. In this study, a novel adsorbent was created through the electrospinning of polyvinyl alcohol/polyacrylic acid (PVA/PAA), incorporated with hexagonal boron nitride (hBN) coated with polydopamine (PDA). The integration of hBN and PDA substantially enhanced the adsorption capacity of the PVA/PAA fibers, making them highly effective in adsorbing cationic dyes such as methylene blue and crystal violet, as well as cobalt (II) ions, from contaminated water. The adsorbents were assessed to understand how their adsorption behavior varies with pH, as well as to examine their adsorption kinetics and isotherms. The results indicate that the PVA/PAA-hBN@PDA adsorbent has maximum adsorption capacities of 1029.57 mg/g, 793.65 mg/g, and 62.46 mg/g for methylene blue, crystal violet, and cobalt (II) ions, respectively. This underscores the superior performance of the PVA/PAA-hBN@PDA adsorbent when compared to both the PVA/PAA and PVA/PAA-hBN adsorbents. The adsorption kinetics adhered to a pseudo-second-order model, indicating chemisorption, whereas the Langmuir model implied a monolayer adsorption. Overall, the findings of this study highlight the efficacy of harnessing the synergistic capabilities of hBN and PDA within the PVA/PAA-hBN@PDA adsorbents, providing an efficient and eco-friendly approach to removing cationic dyes and heavy metals from contaminated water, and thereby contributing to a cleaner and safer environment for all.

Preparation of graphene oxide-doped silica aerogel using supercritical method for efficient removal of emerging pollutants from wastewater

Emerging pollutants and a large volume of unused dyes from the textile industry have been contaminating water bodies. This work introduces a scalable approach to purifying water by the adsorption of Acid green 25 (AG), Crystal Violet (CV), and Sulfamethoxazole (SMA) from an aqueous solution by graphene oxide (GO) doped modified silica aerogel (GO-SA) with supercritical fluid deposition (SFD) method. Characterization of GO-SA using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), high-resolution scanning electron microscopy (HR-SEM), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) adsorption isotherms revealed the improvement in the adsorbent surface area, and its textural properties. The high removal percentages observed in most of the experimental runs provide evidence of the excellent performance of the adsorbent towards the anionic and cationic dyes along with the antibiotic. The adsorption isotherm and kinetics showed that the Langmuir isotherm and pseudo-second-order kinetic models could explain adsorption. The adsorbent holds a higher adsorption capacity for SMA (67.07 mg g-1) than for CV (41.46 mg g-1) and AG (20.56 mg g-1) due to the higher hydrophobicity that interacts with the hydrophobic adsorbent. The GO-SA successfully removed AG, CV, and SMA with removal percentages of 98.23%, 98.71%, and 94.46%, respectively. The parameters were optimized using Central Composite Design (RSM-CCD). The prepared aerogel showed excellent reusability with a removal efficiency of > 85% even after 5 cycles. This study shows the potential of GO-SA adsorbent in textile and other wastewater purification.

Magnetic cross-linked chitosan for efficient removing anionic and cationic dyes from aqueous solution

Herein, a novel magnetic cross-linked chitosan CS-BA@Fe₃O₄ was rationally synthesized by cross-linked with epichlorohydrin and coated with Fe₃O₄ to the acylated chitosan, which was prepared by the reaction of chitosan with benzenetricarboxylic anhydride. The as-obtained absorbent was characterized by FTIR, XRD, VSM, TGA, TEM, BET, SEM and EDS. The results showed that the maximum adsorption capacities of CR and CV were 471.46 ± 16.97 mg/g and 515.91 ± 25.12 mg/g at 318.15 K, respectively. The main adsorption mechanisms were H-bonding and electrostatic interaction. The kinetic data were in good agreement with the pseudo-second-order model and closed to adsorption equilibrium at 30 min. Thermodynamic studies showed that the adsorption on CS-BA@Fe₃O₄ were spontaneous and endothermic. More importantly, the adsorbent exhibited excellent regeneration properties after 6 cycles and remarkable stability under harsh environments including strong acid, strong alkali, multi-salt and mixed dyes conditions. Therefore, abundant efforts revealed a broad application prospect of CS-BA@Fe₃O₄ in water remediation.

An In Situ Coupling Strategy toward Porous Carbon Liquid with Permanent Porosity

An in situ coupling approach is used to fabricate the porous carbon liquid with permanent porosity by directly dispersing hollow carbon nanospheres in polymerized ionic liquids. It is a kind of homogenous and stable type III porous liquid at room temperature. Because of the well-preserved permanent porosity, this unique porous carbon liquid is capable of absorbing the largest quantity of carbon dioxide than the reference PILs and solid carbon liquid, thus, can function as a promising candidate for application in gas storage. More importantly, this approach not only provides an easy method to tune the properties of those specific porous liquids, but also is suitable for fabricating other porous liquid based on varied porous structures (e.g., porous carbon nitride, porous boron nitride, and polymer with intrinsic microporosity), thus paving a viable path for the rational design and synthesis of novel porous liquids with functional properties for specific applications.

Green fabrication of ZnO nanoparticles using Eucalyptus spp. leaves extract and their application in wastewater remediation

The present study explored removal of carcinogenic cationic and anionic dyes from aqueous medium using green fabricated zinc oxide nanoparticles (ZnO-NPs). The ZnO-NPs were synthesized employing biogenic green reduction and precipitation approach. The characterization of ZnO NPs was done using various techniques such as FESEM, XRD, BET, TGA, HRTEM, EDX, and FTIR. All experiments were conducted in batch mode. Maximum removal was achieved at pH 6.0 and pH 8.0 for Congo Red (CR) and Malachite Green (MG) dyes respectively. Dye adsorption process showed better fit with Langmuir and Temkin isotherm models for CR dye and MG dye respectively. Maximum adsorption capacity of ZnO NPs was 48.3 mg/g for CR dye and 169.5 mg/g for MG dye. The dye adsorption followed pseudo-second order model and values of thermodynamic parameters confirmed that the adsorption process was spontaneous and favourable. Reusability efficiency of the nanoparticle was explored using ethanol and water and based on results it was inferred that ZnO-NPs can be reused for dye removal. Effect of salinity on the removal of CR and MG dyes was also explored and found that presence of salinity in aqueous medium have adverse impact on the dye removal efficiency of ZnO-NPs.