Development of a fused imidazo[1,2-a]pyridine based fluorescent probe for Fe3+ and Hg2+ in aqueous media and HeLa cells

A fluorescent chemosensor for selective detection of chromium (III) ions in environmentally and biologically relevant samples

A simple single step one pot multicomponent reaction was performed to synthesize N-(tert-butyl)-2-(furan-2-yl)imidazo[1,2-a]pyridine-3-amine (TBFIPA). The synthesized TBFIPA was subjected to library of cations to study its ability for selective and sensitive detection of specific metal ions. Selective detection of chromium ions by TBFIPA were found from the significant hypsochromic shift (335 nm → 285 nm) in the UV-Visible spectra. The fluorescent TBFIPA displays complete quenching of fluorescence under UV lamp (365 nm) only in the presence of chromium without the interference of common metal ions. Binding constant (ka) obtained from Benesi-Hildebrand plot is 0.21 × 105 M-1, limit of detection (LOD) and limit of quantification (LOQ) of TBFIPA toward Cr3+ ions are 4.70 × 10-7 M and 1.56 × 10-7 M, respectively. The mechanism proposed during complex formation were supported by stoichiometric Job continuous variation plot, 1H NMR titration and ESI-MS spectroscopic data. All the experimental confirmation for complex formation were corroborated with theoretical DFT studies optimized using RB3LYP/6-31G(d) basis set. The selectivity and sensitivity of TBFIPA toward Cr3+ ions are found suitable to design a user-friendly silica based portable test kit. Alongside, TBFIPA was successfully utilized for imaging onion epidermal cells. Furthermore, the results obtained for biological, environmental, and industrial samples provided solid evidence to estimate chromium ions using TBFIPA in these real samples.

Imidazopyridine Family: Versatile and Promising Heterocyclic Skeletons for Different Applications

In recent years, there has been increasing attention focused on various products belonging to the imidazopyridine family; this class of heterocyclic compounds shows unique chemical structure, versatile optical properties, and diverse biological attributes. The broad family of imidazopyridines encompasses different heterocycles, each with its own specific properties and distinct characteristics, making all of them promising for various application fields. In general, this useful category of aromatic heterocycles holds significant promise across various research domains, spanning from material science to pharmaceuticals. The various cores belonging to the imidazopyridine family exhibit unique properties, such as serving as emitters in imaging, ligands for transition metals, showing reversible electrochemical properties, and demonstrating biological activity. Recently, numerous noteworthy advancements have emerged in different technological fields, including optoelectronic devices, sensors, energy conversion, medical applications, and shining emitters for imaging and microscopy. This review intends to provide a state-of-the-art overview of this framework from 1955 to the present day, unveiling different aspects of various applications. This extensive literature survey may guide chemists and researchers in the quest for novel imidazopyridine compounds with enhanced properties and efficiency in different uses.

Development of highly selective fluorescent ferrocenyl-iminopyridine chemosensor for biologically relevant Fe3

Design, synthesis, characterization, and ion detection studies of two ferrocene-appended Schiff bases namely N-(2-[ferrocenylamino]ethyl)-5-nitropyridin-2-amine (1) and ferrocenylamino-1H-imidazole-4-carboxamide (2) been reported. Both the chemosensors have been thoroughly characterized using Fourier transfer infrared, 1 H and 13 C nuclear magnetic resonance, high resolution mass spectrometry, and ultraviolet/visible (UV/visible) and fluorescence spectral techniques. Probes 1 and 2 were designed with the aim of appending the ferrocenyl group with pyridine ring having an amine substitution (for 1) and imidazole ring with an amide substitution (for 2). Interaction of these probes with a series of cations and anions was examined through UV/vis and fluorescence spectral techniques. Probe 2 exhibited an insignificant response towards anions and loss of selectivity for cations, whereas 1 displayed highly selective detection towards biologically important Fe3+ in 2:1 (probe:cation) stoichiometry. Notably, none of the cations and anions could interfere the selectivity of Fe3+ ensured by 1 in aqueous medium. The limit of detection for Fe3+ detection using 1 was determined to be 0.2 ppm. The results strongly suggest that 1 could find promising future application as a chemosensor for Fe3+ in biological systems for quantification and qualitative analysis.

Imidazo[1,2-a]pyridine derivatives synthesis from lignin β-O-4 segments via a one-pot multicomponent reaction

The catalytic conversion of lignin into N-containing chemicals is of great significance for the realization of value-added biorefinery concept. In this article, a one-pot strategy was designed for the transformation of lignin β-O-4 model compounds to imidazo[1,2-a]pyridines in yields up to 95% using 2-aminopyridine as a nitrogen source. This transformation involves highly coupled cleavage of C-O bonds, sp³C-H bond oxidative activation, and intramolecular dehydrative coupling reaction to construction of N-heterobicyclic ring. With this protocol, a wide range of functionalized imidazo[1,2-a]pyridines sharing the same structure skeleton as those commercial drug molecules, such as Zolimidine, Alpidem, Saripidem, etc., were synthesized from different lignin β-O-4 model compounds and one β-O-4 polymer, emphasizing the application feasibility of lignin derivatives in N-heterobicyclic pharmaceutical synthesis.

Simple and efficient PET and AIEE mechanism-based fluorescent probes for sensing Tabun mimic DCNP

The highly sensitive, selective, easy-to-prepare, aqueous media based on two novel probes 2-(pyren-1-yl)imidazo[1,2-a]pyridine (IMP-Py) and (2-(pyren-1-yl)imidazo[1,2-a]pyridin-3-yl)methanol (IMP-Py-OH) are synthesized for the detection of toxic chemical warfare nerve agent mimic diethylcyanochlorophosphonate (DCNP). Both probes are found effective in the detection of DCNP but comparatively, IMP-Py shows better properties in terms of instantaneous response, specificity, selectivity and a low detection limit of 16.9 nM. A significant enhancement of fluorescence intensity of IMP-Py due to aggregation-induced emission enhancement (AIEE) and photoinduced electron transfer (PET) phenomenon was inhibited due to phosphorylation of the hydroxy group of IMP-Py-OH in presence of DCNP has been observed. Taking the advantages of good sensitivity and fast response, probe IMP-Py has been fabricated into a viable paper strips portable product, tested for its potential for the detection of DCNP in tap water as well as with its vapor and response is visible under a UV lamp of 365 nm wavelength.

A Colorimetric Distinct Color Change Cu(II) 4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one Chemosensor and its Application as a Paper Test Kit

In the current research work "4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one" chemosensor (C1) synthesized by condensation reaction using "4-amino-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one" and "2,5-dihydroxy actophenone" was used as the effective sensor of metal ion. The C1 shows absorption peak at 326 nm due to the C = C bond (π-π* transition), while the absorption peak at 364 nm is caused by the C = O bond (n-π* transition). In the presence of copper, C1 only demonstrated a redshift in absorption peak from 364 to 425 nm. Even in the presence of other competing metal ions, the hypsochromic shift of the absorption band and the quenching of the fluorescence emission intensity were different for detecting Cu²⁺, in CH₃OH-H₂O (v/v = 6:4). The capacity of the C1 to bind with Cu²⁺ was further proved using DFT simulations. The complex C1 + Cu²⁺ has a HOMO-LUMO energy gap of 2.8002 eV, which is lesser than C1 (2.9991 eV) showing improvement in the stability of the C1 + Cu²⁺ complex. Using the Benesi-Hildebrand and Scatchard plots, calculated Kb values were to be 47,340 and 48369 M^-1 respectively, showing the creation of stable complexation between Cu²⁺ and C1 with 1:1 stoichiometry. The limit of detection (LOD) for Cu²⁺ ion was 649 nM. Strip sheets were also built and tested to detect varying amounts of Cu²⁺ in aqueous solution, and their color change suggested that they might be used for on-site Cu²⁺ detection in polluted water.

Progress in the Development of Imidazopyridine-Based Fluorescent Probes for Diverse Applications

Different classes of Imidazopyridine i.e., Imidazo[1,2-a]pyridine, Imidazo[1,5-a] pyridine, Imidazo[4,5-b]pyridine, have shown versatile applications in various fields. In this review, we have concisely presented the usefulness of the fluorescent property of imidazopyridine in different fields such as imaging tools, optoelectronics, metal ion detection, etc. Fluorescence mechanisms such as excited state intramolecular proton transfer, photoinduced electron transfer, fluorescence resonance energy transfer, intramolecular charge transfer, etc. are incorporated in the designed fluorophore to make it for fluorescent applications. It has been widely employed for metal ion detection, where selective metal ion detection is possible with triazole-attached imidazopyridine, β-carboline imidazopyridine hybrid, quinoline conjugated imidazopyridine, and many more. Also, other popular applications involve organic light emitting diodes and cell imaging. This review shed a light on recent development in this area especially focusing on the optical properties of the molecules with their usage which would be helpful in designing application-based new imidazopyridine derivatives.

Imidazo[1,2-a]pyridine based small organic fluorescent molecules for selective detection of nerve agents simulants

A fused heterocyclic ESIPT imidazo[1,2-a]pyridine-based probes for colorimetric and fluorometric detection of nerve agents simulant sarin (DCP) and tabun (DCNP) are reported. The probes (5b, 6a & 6b) were found to be highly sensitive and selective for the detection of DCNP and DCP at a micromolar concentration within seconds with no observed interference from other various types of analytes. The LOD for 6b towards DCP was found to be 0.6 µM with a linear range from 0 to 8 µM. The low-cost portable cellulose paper strip fabricated with probe 6b for real-time detection of DCP in the gas phase and spiked water has been developed. The paper strip product was found effective in detecting the presence of DCP in water and vapor state with substantial color changes which could be easily observed by the naked eye and under a handheld UV lamp at a wavelength of 365 nm.

Fluorescence "Turn-Off" and Colorimetric Sensor for Fe2+, Fe3+, and Cu2+ Ions Based on a 2,5,7-Triarylimidazopyridine Scaffold

Two cyanoimidazopyridine-based sensors (SS1 and SS2) were explored for the colorimetric and fluorometric detection of Fe2+, Fe3+, and Cu2+ ions in the semi-aqueous medium. The "turn-off" fluorescence response of both sensors to these ions was due to the restriction in internal charge transfer. Job's plot and semi-empirical calculations revealed that SS1 and SS2 complexed with Cu2+ ions in a 1:1 ratio and Fe2+/3+ ions in a 2:1 ratio, respectively. The sensors were found to have high binding constant (K a) values and low detection limit values. FMO analysis using the semi-empirical quantum mechanics method revealed the decrease in energy gap after complexation with metal ions. Sensor-coated filter paper strips were prepared and analyzed, where the color changes in the strips could be utilized for the real-time detection of Fe2+, Fe3+, and Cu2+ ions.

A new sensor based on thieno[2,3-b]quinoline for the detection of In3+ , Fe3+ and F- by different fluorescence behaviors

Based on thieno[2,3-b]quinoline-2-carbohydrazide and salicylaldehyde, a novel fluorescent probe (L) was designed and synthesized. L could be used as a multifunctional sensor to sequentially detect In³⁺ and Fe³⁺ through fluorescence enhancement and fluorescence quenching in DMF/H₂ O buffer solutions. At the same time, L had good anti-interference ability, which could still detect In³⁺ and Fe³⁺ well in the presence of other metal ions. For F^- , it could be detected by enhancing the fluorescence change caused by the introduction of Al³⁺ . When other anions were present, the detection of F^- would not be interfered. The detection limits of In³⁺ , Fe³⁺ and F^- were 1.16×10^-10 M, 2.03×10^-8 M and 7.98×10^-9 M, respectively. The complexation model and sensing mechanism between L and In³⁺ , Fe³⁺ and F^- were confirmed by calculating structural optimization and energy optimization using Gaussian 09 software.

New Functionalized Ionic Liquids Based on POSS for the Detection of Fe3+ Ion

This study reports a novel series of imidazolium ionic liquids (ILs) based on polyhedral oligomeric silsesquioxanes (POSS) towards effective detection of metal ions, especially Fe3+ ion. 1H, 13C, 29Si NMR, high resolution mass spectra (HRMS) and Fourier transform infrared spectra (FTIR) were applied to confirm the structures of the ILs based on POSS (ILs-POSS). The three ILs-POSS were synthesized via a green chemistry approach-a thiol-ene "click" reaction without metal ions as catalysts. Furthermore, the spherical vesicle structures of the ILs-POSS were observed and caused by self-assembly behaviors. Through comprehensive characterizations, these ILs-POSS have performed excellent thermal stabilities and low glass transition temperatures. In addition, we found it very meaningful that the limits of detection (LODs) of the three ILs-POSS for the detection of the Fe3+ ion were 7.91 × 10-8 M, 1.2 × 10-7 M, and 1.2 × 10-7 M, respectively. These data illustrate that these ILs-POSS have great potential for the detection of the Fe3+ ion. In conclusion, this study not only prepared novel ILs-POSS, but also provided new materials as fluorescent sensors in the detection of Fe3+.

Diaryliodoniums Salts as Coupling Partners for Transition-Metal Catalyzed C- and N-Arylation of Heteroarenes

Owing to the pioneering works performed on the metal-catalyzed sp2 C–H arylation of indole and pyrrole by Sanford and Gaunt, N– and C-arylation involving diaryliodonium salts offers an attractive complementary strategy for the late-stage diversification of heteroarenes. The main feature of this expanding methodology is the selective incorporation of structural diversity into complex molecules which usually have several C–H bonds and/or N–H bonds with high tolerance to functional groups and under mild conditions. This review summarizes the main recent achievements reported in transition-metal-catalyzed N– and/or C–H arylation of heteroarenes using acyclic diaryliodonium salts as coupling partners.

Coumarin Thiourea-Based Fluorescent Turn-on Hg2+ Probe That Can Be Utilized in a Broad pH Range 1-11

A novel coumarin-thiourea conjugate was synthesized facilely. It served as a fluorescent turn-on chemosensor for selective detection of Hg²⁺ ion over other common competitive metal ions including Li⁺, Na⁺, K⁺, Ag⁺, Cu²⁺, Fe²⁺, Zn²⁺, Co²⁺, Ni²⁺, Mn²⁺, Sr²⁺, Ca²⁺, Mg²⁺, Al³⁺, Cr³⁺ and Fe³⁺ ions based on the Hg²⁺-promoted desulfurization and cyclization reactions. Addition of Hg²⁺ ion to the sensor solution in 2:8 EtOH/H₂O induced a hypsochromic shift of the UV-Vis absorption band from 360 nm to 340 nm accompanying distinct enhancement in the absorption intensity while addition of other metal ions failed to bring about substantial change in the absorption spectra. Addition of Hg²⁺ to the sensor solution also caused marked increase in the fluorescence emission intensity and most common competitive metal ions did not interfere with the selective sensing of Hg²⁺ ion by the sensor. The detection limit of Hg²⁺ ion by the probe was calculated to be 1.46 × 10^-7 M and the probe could be utilized for selective detection of Hg²⁺ ion by fluorescence turn-on mode over a broad pH range of 1-11.