First principles study of g-Mg3N2 as an anode material for Na-, K-, Mg-, Ca- and Al-ion storage

Two-dimensional Be2P4 as a promising thermoelectric material and anode for Na/K-ion batteries

Incredibly effective and flexible energy conversion and storage systems hold great promise for portable self-powered electronic devices. Owing to their large surface area, exceptional atomic structures, superior electrical conductivity and good mechanical flexibility, two-dimensional (2D) materials are recognized as an attractive option for energy conversion and storage application. In this work, we examined the stability, electronic, thermoelectric and electrochemical aspects of a novel 2D Be2P4 monolayer by adopting density functional theory (DFT). The Be2P4 monolayer exhibits a direct semiconductor gap of 0.9 eV (HSE06), large Young's modulus (∼198 GPa), high carrier mobility (∼104 cm2 V-1 s-1) and a low excitonic binding energy of 0.11 eV. Our calculated findings suggest that Be2P4 shows a lattice thermal conductivity of 1.02 W m K-1 at 700 K, resulting in moderate thermoelectric performance (ZT ∼ 0.7), encouraging its use in thermoelectric materials. In addition, a higher adsorption energy of -2.28 eV (-2.52 eV) and less diffusion barrier of 0.22 eV (0.17 eV) for Na(K)-ion batteries promote fast ion transport in the Be2P4 monolayer. This material also shows a high specific capacity and superior energy density of 8460 W h kg-1 (8883 W h kg-1) for Na(K)-ion batteries. Thus, our results offer insightful information for investigating potential thermoelectric and flexible anode materials based on the Be2P4 monolayer.

A two-dimensional metallic SnB monolayer as an anode material for non-lithium-ion batteries

Na-, K- and Mg-ion batteries (NIBs, KIBs and MIBs) have drawn considerable interest due to their high abundance and excellent safety. However, the lack of high-performance anode materials is a major obstacle to its development. A metallic SnB planar monolayer is predicted by using the two-dimensional global minimum structure search method of swarm intelligence. Based on first-principles calculations, we proved that the metal SnB monolayer has high binding energy and excellent dynamical, thermal and mechanical stability. It is worth noting that the SnB monolayer has several stable adsorption sites for Na-, K- and Mg-ions, so it has a high theoretical capacity of 620.93, 517.44 and 620.93 mA h g^-1, respectively. For Na-, K- and Mg-ion batteries, the low diffusion barriers of the SnB monolayer are 0.22, 0.07 and 0.68 eV, and the low average open circuit voltages are 0.42, 0.49 and 0.23 V, which ensure long service life and fast charging in practical applications. In addition, it is proved that the SnB monolayer maintains excellent conductivity and stability during the charge-discharge process. The results show that the SnB monolayer offers innovative advantages for the development of new two-dimensional planar structures that further advance the development of anode materials for metal ion batteries.

Adsorption and diffusion of magnesium on nitrogen-doped Mo2C monolayer

The Mg adsorption and diffusion behaviors on nitrogen-doped (N-doped) Mo₂C monolayer have been investigated by the first principles based on density functional theory (DFT). To investigate the effect of nitrogen concentration on adsorption energies, Mo₂C_1-xN_x (x=0.0625, 0.125, 0.1875, and 0.25) with four different nitrogen doping concentrations have been considered in the present work. The results show that N-doped Mo₂C is benefit for Mg adsorption. In particular, when the doping concentration reaches to 14.29%, the adsorption energies of Mg on Mo₂C_0.875N_0.125 are in the region between -1.639 and -1.517 eV, e.g., the adsorption energies of Mg on T_C1 and H₂ sites are -1.639 eV and -1.625 eV, which are decreased by 16.49% and 18.43% as compared with the pristine Mo₂C. The calculations on diffusion behaviors show that the Mg diffusing between two adjacent favored sites via a high-symmetry site along H₃-B-H₄ and H₁-B-H₁ paths possesses the barriers of 0.021 eV and 0.028 eV. Additionally, the partial density of states (PDOS) reveals the interaction between Mg and Mo₂C_0.875N_0.125, and indicates that nitrogen doping causes the PDOS peaks transfer to a lower energy level, which is benefit for the bonding between Mg and Mo₂C_0.875N_0.125. These results suggest that the adsorption and diffusion behaviors of Mg have been enhanced by nitrogen doping.

Penta-BCN monolayer with high specific capacity and mobility as a compelling anode material for rechargeable batteries

With the increasing demand for sustainable and clean energies, seeking high-capacity density electrode materials applied in rechargeable metal-ion batteries is urgent. In this work, using first-principles calculations, we evaluate the ternary pentagonal BCN monolayer as a compelling anode material for metal ion batteries. Calculations show that the penta-BCN monolayer has favorable metallic behaviors after adsorbing Li (Na) atoms. More interestingly, the saturated adsorption systems provide a large storage capacity of 2183.12 (1455.41) mA h g^-1 for Li (Na) ions. A low energy barrier of 0.14 (0.16) eV for Li (Na) diffusion is observed, being smaller than the reported other two-dimensional anode materials. Also, the wrinkled structure of penta-BCN has been demonstrated to be very beneficial to improve the energy density and cycle life of batteries. The calculated low open-circuit voltage and peculiar surface area expansion together with the thermal stability of saturated intercalation structures, further indicate that the penta-BCN monolayer has great potential as the anode material for Li (Na) ion batteries.

Recent Advances and Perspectives on Calcium-Ion Storage: Key Materials and Devices

The urgent demand for cost-effective energy storage devices for large-scale applications has led to the development of several beyond-lithium energy storage systems (EESs). Among them, calcium-ion batteries (CIBs) are attractive due to abundant calcium resources, excellent volumetric and gravimetric capacities of Ca metal anode, and potential high energy density coming from the multivalent feature of Ca-ion. Therefore, the exploration of CIBs electrode materials and the construction of CIBs devices are gaining increasing research interest. Relevant publications cover a wide range of materials by both theoretical and experimental investigations, whereas the performances of rocking-chair CIBs have been unsatisfactory. Meanwhile, multi-ion strategies using more than one ion as the charge carrier have been demonstrated to be feasible and promising options in realizing room temperature CIBs. The summary and reflection of previous studies would provide useful information for future exploration and optimization. In this circumstance, this paper overviews the reported CIBs electrode materials, including both anode and cathode, and presents the latest progress of multi-ion strategies in CIBs. Fundamental challenges, potential solutions, and opportunities are accordingly proposed, mimicking other more mature EESs. This review may promote the development of electrode materials and accelerate the construction of low-cost and high-performance CIBs.

Enhancement of the electrochemical performance of lithium-ion batteries by SiO2@poly(2-acrylamido-2-methylpropanesulfonic acid) nanosphere addition into a polypropylene membrane

Employing electrostatic self-assembly and free radical polymerization, the surface of SiO₂ nanospheres was coated with poly(2-acrylamido-2-methylpropanesulfonic acid) (SiO₂@PAMPS) bearing strong electron withdrawing sulfonic and amide groups, enhancing the dissociation ability of the lithium salt of the liquid electrolyte and absorbing anions via hydrogen bonds. After SiO₂@PAMPS nanospheres were introduced into the polypropylene (PP) membrane (SiO₂@PAMPS/PP), the electrolyte affinity and electrolyte uptake of the composite separators were significantly improved. The ionic conductivity of SiO₂@PAMPS/PP-18% (where 18% represents the concentration of the solution used for coating) soaked in liquid electrolyte was even 0.728 mS cm^-1 at 30 °C, much higher than that of the pristine PP membrane. The LiFePO₄/Li half-cell with SiO₂@PAMPS/PP-18% had a discharge capacity of 148.10 mA h g^-1 and retained 98.67% of the original capacity even after 120 cycles at 0.5C. Even at a rate of 1.0C, the cell capacity could be maintained above 120 mA h g^-1. Therefore, a coating formula was developed that could considerably improve the cycling ability and high rate charge-discharge performance of lithium ion batteries.