The effective photocatalysis and antibacterial properties of AgBr/AgVO3 composites under visible-light

Transformation of PMMA from sunlight-blocking to sunlight-activated coupled with DNH photocatalytic platform for oxidative coupling of amines and generation/regeneration of LDC/NADH

The photocatalytic oxidation and generation/regeneration of amines to imines and leucodopaminechrome (LDC)/NADH are subjects of intense interest in contemporary research. Imines serve as crucial intermediates for the synthesis of solar fuels, fine chemicals, agricultural chemicals, and pharmaceuticals. While significant progress has been made in developing efficient processes for the oxidation and generation/regeneration of secondary amines, the oxidation of primary amines has received comparatively less attention until recently. This discrepancy can be attributed to the high reactivity of imines generated from primary amines, which are prone to dehydrogenation into nitriles. In this study, we present the synthesis and characterization of a novel polymer-based photocatalyst, denoted as PMMA-DNH, designed for solar light-harvesting applications. PMMA-DNH incorporates the light-harvesting molecule dinitrophenyl hydrazine (DNH) at varying concentrations (5%, 10%, 20%, 30%, and 40%). Leveraging its high molar extinction coefficient and slow charge recombination, the 30% DNH-incorporated PMMA photocatalyst proves to be particularly efficient. This photocatalytic system demonstrates exceptional yields (96.5%) in imine production and high generation/regeneration rates for LDC/NADH (65.27%/78.77%). The research presented herein emphasizes the development and application of a newly engineered polymer-based photocatalyst, which holds significant promise for direct solar-assisted chemical synthesis in diverse commercial applications.

Nanomaterials to address the genesis of antibiotic resistance in Escherichia coli

Escherichia is a genus of prokaryotic gram-negative bacteria which forms a vital component of the gut microbiota of homeotherms including humans. Many members of this genus are commensals and pathogenic strains, which are responsible for some of the most common bacterial infections and can be fatal, particularly in the case of newborns and children. The fecal matter in wastewater treatment plants serves as major environmental sinks for the accumulation of Escherichia. The rise in antibiotic pollution and the lateral gene exchange of antibiotic-resistant genes have created antibiotic-resistant Escherichia strains that are often called superbugs. Antibiotic resistance has reached a crisis level that nowadays existing antibiotics are no longer effective. One way of tackling this emerging concern is by using nanomaterials. Punitively, nanomaterials can be used by conjugating with antibodies, biomolecules, and peptides to reduce antibiotic usage, whereas, preventatively, they can be used as either nano-antimicrobial additives or nano-photocatalytic sheets to reduce the microbial population and target the superbugs of environmental Escherichia. In this review, we have explored the threat posed by pathogenic Escherichia strains in the environment, especially in the context of antibiotic-resistant strains. Along with this, we have discussed some nanomaterial-mediated strategies in which the problem can be addressed by using nanomaterials as nanophotocatalytics, antimicrobial additives, drugs, and drug conjugates. This review also presents a brief overview of the ecological threats posed by the overuse of nanomaterials which warrants a balanced and judicious approach to the problem.

Silver Halide-Based Nanomaterials in Biomedical Applications and Biosensing Diagnostics

In recent years, silver halide (AgX, X = Cl, Br, I)-based photocatalytic materials have received increasing research attention owing to their excellent visible-light-driven photocatalytic performance for applications in organic pollutant degradation, HER, OER, and biomedical engineering. Ag as a noble metal has a surface plasma effect and can form Schottky junctions with AgX, which significantly promotes electron transport and increases photocatalytic efficiency. Therefore, Ag/AgX can reduce the recombination rate of electrons and holes more than pure AgX, leading to using AgX as a photocatalytic material in biomedical applications. The use of AgX-based materials in photocatalytic fields can be classified into three categories: AgX (Ag/AgX), AgX composites, and supported AgX materials. In this review, we introduce recent developments made in biomedical applications and biosensing diagnostics of AgX (Ag/AgX) photocatalytic materials. In addition, this review also discusses the photocatalytic mechanism and applications of AgX (Ag/AgX) and supported AgX materials.

Bactericidal activity of Ag4V2O7/β-AgVO3 heterostructures against antibiotic-resistant Klebsiella pneumoniae

Although Ag-based materials are efficient against antibiotic-resistant bacteria, their high toxicity to living organisms represents a major challenge for obtaining useful products. In this work, we report the bactericidal activity of Ag₄V₂O₇/β-AgVO₃ heterostructures, which proved to be effective against Klebsiella pneumoniae (ATCC 1706, a standard strain; A54970, a multidrug-resistant carbapenemase (KPC)-producing strain; A34057, a multidrug-resistant strain capable of producing extended spectrum beta-lactamases (ESBL); and a community-isolated strain, A58240) at minimum inhibitory concentrations (MIC) as low as 62.5 μg/mL. This activity is higher than that reported for the individual silver vanadates (Ag₄V₂O₇ or β-AgVO₃) owing to the synergistic interactions between both semiconductors. However, the most efficient heterostructure was found to be toxic to mouse 3 T3 fibroblasts and to L. sativa and C. sativus seeds, as indicated by MTT ((4,5 - dimethylthiazol -2yl) 2,5 -diphenylbromide), neutral red assays and germination index measurements. The antimicrobial, phytotoxic and cytotoxic activities were all associated with an efficient generation of reactive oxygen species (ROS) in the heterostructure, especially OH and O₂^- radicals. The ROS production by Ag₄V₂O₇/β-AgVO₃ heterostructures was measured through photodegradation studies with Rhodamine B. While the bactericidal activity of the heterostructures is promising, especially when compared to Ag-based materials, their use in practical applications will require encapsulation either to avoid leaching or to mitigate their toxicity to humans, animals and plants.

Novel MOF-Based Photocatalyst AgBr/AgCl@ZIF-8 with Enhanced Photocatalytic Degradation and Antibacterial Properties

A novel visible light-driven AgBr/AgCl@ZIF-8 catalyst was synthesized by a simple and rapid method. The composition and structure of the photocatalyst were characterized by XRD, SEM, UV-DRS, and XPS. It could be observed that the 2-methylimidazole zinc salt (ZIF-8) exhibited the rhombic dodecahedron morphology with the AgCl and AgBr particles evenly distributed around it. The composite photocatalyst AgBr/AgCl@ZIF-8 showed good photocatalytic degradation and antibacterial properties. The degradation rate of RhB solution was 98%, with 60 min of irradiation of visible light, and almost all P. aeruginosaudomonas aeruginosa (P. aeruginosa), Staphylococcus aureus (S. aureus), and Escherichia coli (E. coli) were inactivated under the irradiation of 90 min. In addition, the prepared catalyst had excellent stability and reusability. Based on the free radical capture experiment, ·O₂⁻ and h⁺ were believed to be the main active substances, and possible photocatalytic degradation and sterilization mechanisms of AgBr/AgCl@ZIF-8 were proposed.

One-pot hydrothermal synthesis of a double Z-scheme g-C3N4/AgI/β-AgVO3 ternary nanocomposite for efficient degradation of organic pollutants and DPC-Cr(VI) complex under visible-light irradiation

The Z-scheme photocatalytic system provides a promising way to achieve significant photodegradation efficiency. The work embodied here describes the synthesis of highly efficient double Z-scheme g-C₃N₄/AgI/β-AgVO₃ (g-CNAB) ternary nanocomposite using a one-pot hydrothermal route. The optical properties, phase structure, and morphology of the synthesized samples were investigated using UV-visible diffuse-reflectance spectroscopy (UV-Vis DRS), X-ray diffraction, and scanning electron microscopy, respectively. The transmission electron microscopy investigation revealed that synthesized composite material represents close interfacial interactions. X-ray photoelectron spectroscopy analysis confirms the presence of all the elements in the synthesized ternary nanocomposite materials. The photocatalytic performance of as-prepared photocatalysts has been systematically investigated using the photodegradation of a variety of pollutants, including Rhodamine B, Ciprofloxacin, and 1,5-diphenylcarbazide-Cr(VI) [DPC-Cr(VI)] complex under visible-light irradiation. Among all synthesized materials, such as g-C₃N₄, AgI, β-AgVO₃, and ternary nanocomposites with varying loading of β-AgVO₃ [g-CNAB_{(0.5, 1.0, 1.5, 2.0)}], the photocatalyst g-CNAB_(1.5) nanocomposite achieved a remarkably high photocatalytic efficiency. The quenching impact of several scavengers revealed that reactive species such as superoxide anion radical (O₂^·-) and hydroxyl radical (·OH) are significant in the degradation of various contaminants. Based on the characterization and application, a plausible photocatalytic mechanism has been sketched out to determine the reaction pathways involved in the degradation of pollutants present in the aqueous medium.

Photocatalytic Inactivation as a Method of Elimination of E. coli from Drinking Water

The presence of microorganisms, specifically the Escherichia coli, in drinking water is of global concern. This is mainly due to the health implications of these pathogens. Several conventional methods have been developed for their removal; however, this pathogen is still found in most drinking water. In the continuous quest for a more effective removal approach, photocatalysis has been considered as an alternative method for the elimination of pathogens including E. coli from water. Photocatalysis has many advantages compared to the conventional methods. It offers the advantage of non-toxicity and utilizes the energy from sunlight, thereby making it a completely green route. Since most photocatalysts could only be active in the ultraviolet region of the solar spectrum, which is less than 5% of the entire spectrum, the challenge associated with photocatalysis is the design of a system for the effective harvest and complete utilization of the solar energy for the photocatalytic process. In this review, different photocatalysts for effective inactivation of E. coli and the mechanism involved in the process were reviewed. Various strategies that have been adopted in order to modulate the band gap energy of these photocatalysts have been explored. In addition, different methods of estimating and detecting E. coli in drinking water were presented. Furthermore, different photocatalytic reactor designs for photocatalytic inactivation of E. coli were examined. Finally, the kinetics of E. coli inactivation was discussed.

Application of nanostructures as antimicrobials in the control of foodborne pathogen

Foodborne pathogens are the main cause of human foodborne diseases and pose a serious threat to food safety. The control of them has always been a significant issue in food industry. With good biocompatibility and stability, nanomaterials display excellent bactericidal properties against many kinds of bacteria. In this review, the generation and application of nanostructures as antibacterial in the control of foodborne pathogens was summarized. The antibacterial effects of photocatalytic and contact bacteriostatic nanomaterials agents were mainly introduced. The influence factors and mechanisms of nanomaterials on the inactivation of foodborne pathogens were displayed. The photocatalytic nanostructured bacteriostatic agents can produce reactive oxygen species (ROS) and lead to charge transfer, which result in damaging of cell wall and leakage of small molecules under light irradiation. In addition, metals and metal oxide nanoparticles can kill bacterial cells by releasing metal ions, forming ROS and electrostatic interaction with cell membrane. Besides, the synergistic action of nanoparticles with natural antibacterial agents can improve the stability of these agents and their bactericidal performance. These current researches provided a broader idea for the control of microorganisms in food.

Fabrication of a Novel AgBr/Ag2MoO4@InVO4 Composite with Excellent Visible Light Photocatalytic Property for Antibacterial Use

A novel AgBr/Ag2MoO4@InVO4 composite photocatalyst with different heterojunction structures was successfully constructed by compounding InVO4 with Ag2MoO4 and AgBr. According to the degradation, antibacterial and free radical trapping data, the photocatalytic antibacterial and antifouling activities of AgBr/Ag2MoO4@InVO4 composite were evaluated, and the corresponding photocatalytic reaction mechanism was proposed. Adding AgBr/Ag2MoO4@InVO4 composite, the degradation rate of ciprofloxacin (CIP) achieved 95.5% within 120 min. At the same time, the antibacterial rates of Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) achieved 99.99%. The AgBr/Ag2MoO4@InVO4 composite photocatalyst showed promising usage in photocatalytic antibacterial and purification areas.

One-step preparation of sulfur-doped porous g-C3N4 for enhanced visible light photocatalytic performance

Nonmetal doping is a convenient method to adjust the visible light photocatalytic activity of graphitic carbon nitride (g-C3N4). Herein, highly active sulfur-doped porous g-C3N4 (C3N4-S) was successfully prepared by one-step calcination using thiourea and melamine as the precursors. C3N4-S exhibited excellent photocatalytic performance for the degradation of Rhodamine B (RhB) under visible light irradiation. C3N4-S not only promoted the separation of photogenerated electron-hole pairs, but also enhanced electron transfer, resulting in a great improvement in the photocatalytic efficiency. Based on capture experiments and DMPO spin-trapping ESR spectra, the superoxide radical (˙O2-) was proved to be the predominant active species and the possible photocatalytic mechanism of C3N4-S was proposed. The photocatalytic mechanism of RhB degradation over C3N4-S was further explored using high-resolution mass spectra (HRMS).