Tailor-made block copolymers of l-, d- and rac-lactides and ε-caprolactone via one-pot sequential ring opening polymerization by pyridylamidozinc(ii) catalysts

Heteroleptic Magnesium n-Butyl on a Chemically Non-innocent 2-Anilidomethylpyridine Ligand Leading to Diverse Magnesium Hydrides

Molecular magnesium hydrides and hydride-rich clusters are of significant interest for applications ranging from catalysis and small molecule activation to hydrogen storage. Here, we investigate the 2-anilidomethylpyridine framework NNL as an ancillary support for magnesium organometallics with a special emphasis on hydrides. The proligand NNLH (N-[2,6-bis(1-methylethyl)phenyl]-α,6-diphenyl-2-pyridinemethanamine) gives [(NNL)Mg(nBu)(thf)] (1) by nbutane elimination from Mg(nBu)2(thf)n. A stronger donor such as DMAP replaces the THF from 1 to give [(NNL)Mg(nBu)(dmap)] (2). Both are air-sensitive, and 1 is adventitiously oxidized into [(NNL)Mg(μ-OnBu)]2 (32). The homoleptic [(NNL)2Mg] (8) is made from 1 and a second equiv of NNLH. 1's terminal nBu group is selectively protonated by HN(SiMe3)2 to give [(NNL)MgHMDS] (4; HMDS = N(SiMe3)2), whereas Ph3SiOH partially protonates the backbone anilide as well to give a mixture of [(NNL)Mg(OSiPh3)(thf)] (5) and free NNLH. Like HN(SiMe3)2, aprotic MeOTf also reacts by selectively abstracting the nBu group from 1 to give [(NNL)Mg(μ:κ2-O,O'-OTf)(thf)]2 (62). Interestingly, screening the common synthetic routes for magnesium hydrides leads to diverse outcomes upon varying the Mg precursors and hydride sources. 1 and PhSiH3 give the hydride cluster [{(NNL)2Mg2(μ-H)}2(μ-H)4Mg] (7), whereas 2 and PhSiH3 give the molecular complex [(NNLde)Mg(dmap)2] (9) with a dearomatized pyridyl backbone. 1 and HBpin (pinacolborane) give a product mixture, from which a different hydride cluster [(NNL)2Mg2(μ-H)}2(μ:κ2-O,O'-O2C2Me4)] (10) is identified, showing a rare instance of complete deborylation of a HBpin molecule. 1 and HBcat (catecholborane) also give a product mixture, one of which is the borylated ligand [(NNL)Bcat] (11). HBpin with 4 as the Mg precursor takes the ligand borylation route more selectively to give [(NNL)Bpin] (12). Last, 1 reacts with iPrNH2BH3 to give [(NNL)Mg{NH(iPr)BH3}] (13), which shows a slow and fractional conversion into the dinuclear mixed hydrido amidoborane [(NNL)2Mg2(μ-H){(μ-NH(iPr)BH3}] (14) by partial β-hydride elimination. In comparison, [(NNL)Mg(iPrNHBH3)(dmap)] (15) arising from the DMAP-bound 2 and iPrNH2BH3 is stable toward such elimination.

Cooperative heterometallic catalysts: balancing activity and control in PCL-block-PLA copolymer synthesis

Heterometallic cooperativity is gaining momentum in cyclic ester ring-opening polymerisation, yet remains surprisingly underexplored in their block copolymerisations. Here, we report the first homogeneous heterometallic "ate" catalysts for poly(ε-caprolactone)-poly(lactic acid) block copolymers, showcasing the substantial differences in the polymer structures observed upon exchanging Zn for Mg or Ca.

Ring Opening Polymerization of Six- and Eight-Membered Racemic Cyclic Esters for Biodegradable Materials

The low percentage of recyclability of the polymeric materials obtained by olefin transition metal (TM) polymerization catalysis has increased the interest in their substitution with more eco-friendly materials with reliable physical and mechanical properties. Among the variety of known biodegradable polymers, linear aliphatic polyesters produced by ring-opening polymerization (ROP) of cyclic esters occupy a prominent position. The polymer properties are highly dependent on the macromolecule microstructure, and the control of stereoselectivity is necessary for providing materials with precise and finely tuned properties. In this review, we aim to outline the main synthetic routes, the physical properties and also the applications of three commercially available biodegradable materials: Polylactic acid (PLA), Poly(Lactic-co-Glycolic Acid) (PLGA), and Poly(3-hydroxybutyrate) (P3HB), all of three easily accessible via ROP. In this framework, understanding the origin of enantioselectivity and the factors that determine it is then crucial for the development of materials with suitable thermal and mechanical properties.

2-Anilidomethylpyridine-Derived Three-Coordinate Zinc Hydride: The Journey Unveils Anilide Backbone's Reactive Nature

Low-coordinate heteroleptic zinc hydrides are catalytically important but rare and synthetically challenging. We herein report three-coordinate monomeric zinc hydride on a 2-anilidomethylpyridine framework (NNL). The synthetic success comes through systematically screening a few different routes from different precursors. During the process, the ligand's anilide backbone interestingly appears to be more reactive than Zn's terminal site to electrophilic Lewis and Brønsted acids. The proligand NNLH reacts with [Zn{N(SiMe3)2}2] and ZnEt2 to give [(NNL)ZnA] (A = N(SiMe3)2 (1), Et(2)). Both are inert to PhSiH3 and H2 but react with HBpin only through the internal Zn-Nanilide bond to give the borylated ligand NNLBpin (3). The reactions of 1 and 2 with Ph3EOH (E = C, Si) afford a series of divergent compounds like [(NNLH)Zn(OSiPh3)2] (4), [Zn3(OSiPh3)4Et2] (5), and [EtZn(OCPh3)] (6). But in all cases, it is invariably the Zn-Nanilide bond protonated by the -OH with equal or higher preference than the terminal Zn-N or Zn-C bonds. A DFT analysis rationalizes the origin of such a reactivity pattern. Realizing that an acid-free route might be the key, reacting [(NNL)Li] with ZnBr2 gives [(NNL)Zn(μ-Br)]2 (7), which on successively treating with KOSiPh3 and PhSiH3 gives the desired [(NNL)ZnH] (8) as a three-coordinate monomer with a terminal Zn-H bond. Estimating the ligand steric in 8 shows the openness in Zn's coordination sphere, a desired criterion for efficient catalysis. This and a positive influence of the pyridyl sidearm is reflected in 8's superior activity in hydroborating PhC(O)Me by HBpin in comparison to Jones' two-coordinate anilido zinc hydride.

Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance

The incessant developments in the pharmaceutical and biomedical fields, particularly, customised solutions for specific diseases with targeted therapeutic treatments, require the design of multicomponent materials with multifunctional capabilities. Biodegradable polymers offer a variety of tailored physicochemical properties minimising health adverse side effects at a low price and weight, which are ideal to design matrices for hybrid materials. PLAs emerge as an ideal candidate to develop novel materials as are endowed withcombined ambivalent performance parameters. The state-of-the-art of use of PLA-based materials aimed at pharmaceutical and biomedical applications is reviewed, with an emphasis on the correlation between the synthesis and the processing conditions that define the nanostructure generated, with the final performance studies typically conducted with either therapeutic agents by in vitro and/or in vivo experiments or biomedical devices.

Site-Isolated Main-Group Tris(2-pyridyl)borate Complexes by Pyridine Substitution and Their Ring-Opening Polymerization Catalysis

Tris(2-pyridyl)borates are an emerging class of scorpionate ligands, distinguished as exceptionally robust and electron-donating. However, the rapid formation of inert homoleptic complexes with divalent metals has so far limited their catalytic utility. We report site-isolating tris(2-pyridyl)borate ligands, bearing isopropyl, tert-butyl, and mesityl substituents at the pyridine 6-position to suppress the formation of inert homoleptic complexes. These ligands form the first 1:1 complexes between tris(2-pyridyl)borates and Mg²⁺, Zn²⁺, or Ca²⁺, with isopropyl-substituted Tpy^iPrH showing the most generality. Single-crystal X-ray diffraction analysis of the resulting complexes and comparison to density functional theory (DFT) models showed geometric distortions driven by steric repulsion between the pyridine 6-substituents and the hexamethyldisilazide (HMDS^-, ^-N(SiMe₃)₂) anion. We show that this steric profile is a feature of the six-membered pyridine ring and contrasts with more established tris(pyrazolyl)borate and tris(imidazoline)borate scorpionate complexes. Tpy^iPrMg(HMDS) (1) and its zinc analogue are moderately active for the controlled polymerization of l-lactide, ε-caprolactone, and trimethylene carbonate. Furthermore, 1 gives controlled polymerization under more demanding melt-phase polymerization conditions at 100 °C, and block copolymerization of ε-caprolactone and trimethylene carbonate. These results will enable useful catalysis and coordination chemistry studies with tris(2-pyridyl)borates, and characterizes their structural complementarity to more familiar scorpionate ligands.

Lithium, Magnesium, and Zinc Centers N,N'-Chelated by an Amine-Amide Hybrid Ligand

The synthesis and structure of lithium, magnesium, and zinc complexes N,N'-chelated by a hybrid amine-amido ligand ([2-(Me₂NCH₂)C₆H₄NR]^-, abbreviated as L^NR, where R = H, SiMe₃, or Bn) are reported. The reaction of the least sterically demanding L^NH with various magnesium sources gives the hexameric imide [L^NMg]₆ (4) by the elimination of n-butane from L^NHMgⁿBu (2) or by the reaction of L^NHLi (1) with MeMgBr. [L^NH]₂Mg (3) is obtained through the addition of 0.5 equiv of ⁿBu₂Mg or Mg[N(SiMe₃)₂]₂ to L^NH₂ and with 1 equiv of ⁿBu₂Mg reacting to 2. Both L^NHMgN(SiMe₃)₂ (6) and isostructural L^NHZnN(SiMe₃)₂ (16) have been prepared using two different approaches: monodeprotonation of L^NH₂ by Zn/Mg[N(SiMe₃)₂]₂ in a 1:1 ratio or ligand substitution of 2 or L^NHZnEt (12) by 0.5 equiv of Sn[N(SiMe₃)₂]₂. The reactions of 2 or 3 with 1 provide the heterotrimetallic complex [L^NH]₄Li₂Mg (5). Benzyl- or trimethylsilyl-substituted anilines [L^N(SiMe₃)H (7) and L^N(Bn)H (8)] with 0.5 equiv of ⁿBu₂Mg allow the formation of homoleptic bis(amides) of the [L^N(R)]₂Mg type (10 and 11). Nevertheless, only the silylated secondary amine 7 is able to provide the heteroleptic n-butylmagnesium amide L^N(SiMe₃)MgⁿBu (9) upon reaction with an equimolar amount of ⁿBu₂Mg. Similarly, 12, [L^NH]₂Zn (13), L^N(R)ZnEt (17 and 18), and [L^N(R)]₂Zn [R = SiMe₃ (19) and Bn (20)] were prepared by the monodeprotonation of L^NH₂ or L^N(R)H using Et₂Zn in the corresponding stoichiometric ratio. L^NHZnI was prepared by the nucleophilic substitution of an ethyl chain in 12 by molecular iodine. A heterometallic complex, [L^NH]₄Li₂Zn (14), analogous to 5 was prepared from 12 or 13 with 1 or 2 equiv of 1, respectively.

Crystallization, thermal and mechanical properties of stereocomplexed poly(lactide) with flexible PLLA/PCL multiblock copolymer

In this work, the synthesized PLLA/PCL multi-block copolymers with different compositions were introduced into a stereocomplexed poly(lactide) (sc-PLA) matrix to accelerate the stereocomplexation of PLA enantiomers and improve its inherent brittleness. The PLLA/PCL multi-block copolymers were in different compositions to adjust the molecular weight of the PLLA block. The structure, molecular weight, crystallization behavior, crystal structure and thermal stability of PLLA/PCL multi-block copolymers were investigated. The results indicated that PLLA/PCL multi-block copolymers with controllable structure and composition were successfully synthesized. On this basis, the blends of sc-PLA and PLLA/PCL multi-block copolymers were prepared by solution casting, and characterized. The results revealed that the introduction of PLLA/PCL multi-block copolymers promoted the stereocomplexation of the PLA enantiomers during the melting crystallization process to obtain a complete stereocomplexed material. But the presence of the PCL block leads to a decrease in the melting temperature of the stereocomplex and difficulty in homogeneous nucleation. Compared with sc-PLA, the elongation at break of the blends was significantly improved and their tensile strengths were only slightly reduced. And the thermal stability and mechanical properties of the blends could be adjusted by controlling the content and composition of PCL/PLLA multi-block copolymers. These results revealed that the degree of stereocomplexation and toughness of sc-PLA were improved, which may expand the application fields of PLA-based materials.

The PLLA/PCL multi-block copolymer was introduced into the stereocomplexed PLA matrix, and its effect on the crystallization, thermal and mechanical properties of the stereocomplexed PLA was discussed.

Synthesis of High Molecular Weight Stereo-Di-Block Copolymers Driven by a Co-Initiator Free Catalyst

Stereo-diblock copolymers of high molecular weight polylactide (PLA) were synthetized by the one pot-sequential addition method assisted by a heteroscorpionate catalyst without the need of a co-initiator. The alkyl zinc organometallic heteroscorpionate derivative (Zn(Et)(κ3-bpzteH)] (bpzteH = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1-para-tolylethoxide) proved to assist in the mechanism of reaction following a coordination-insertion process. Kinetic studies along with the linear correlation between monomer and number average molecular weight (Mn) conversion, and the narrow polydispersities supported the truly living polymerization character of the initiator, whereas matrix-assisted laser desorption/Ionization-time of flight (MALDI-TOF) studies showed a very low order of transesterification. The high stereo-control attained for the afforded high molecular weight derivatives was revealed by homonuclear decoupled 1H NMR spectra and polarimetry measurements. The nanostructure of the PLA derivatives was studied by both wide-angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) and the stereocomplex phase of the PLA stereo-diblock copolymers was successfully identified.

Zinc 8-aminotrihydroquinolines appended with pendant N-diphenylphosphinoethyl arms as exceptionally active catalysts for the ROP of ε-CL

Through activation with LiCH2SiMe3 or LiN(SiMe3)2, zinc(ii) chloride complexes bearing 5,6,7-trihydroquinolin-8-amines appended with pendant diphenyl phosphine units displayed remarkable catalytic activity for ROP of ε-caprolactone.

Highly Active Homoleptic Zinc and Magnesium Complexes Supported by Constrained Reduced Schiff Base Ligands for the Ring-Opening Polymerization of Lactide

New homoleptic zinc and magnesium complexes containing constrained reduced Schiff base ligands based on substituted 7-hydroxy-1-indanone were successfully synthesized and used as a catalyst for the polymerization of lactide. The ligands contain a side arm having different basicity because dimethylamino, pyridyl, and furfuryl groups are shown to greatly affect the polymerization rates. The homoleptic zinc complex containing constrained reduced Schiff base ligands and a dimethylamino side arm was highly active, giving a 92% conversion of l-lactide in 3 min using [LA]:[Zn]:[BnOH] = 500:1:2 at room temperature. The polymerization is pseudo-first-order dependent on the LA concentration. Well-controlled and living behavior of the zinc complex was observed and demonstrated in the preparation of stereodiblock and triblock copolymers of l-, d-, and rac-lactide in a one-pot sequential synthesis with a predictable block length, block sequence, and narrow dispersity rapidly in 10 min. Stereocomplex formation was observed for PLA made sequentially from 100 l-LA, 100 rac-LA, and 100 d-LA having a high T_m of up to 220 °C.

Recent developments in biodegradable block copolymers

Block copolymers consist of two or more segments of polymer chains in a typical arrangement through connected covalent bonds. Biodegradable block copolymers have emerged as useful carriers for controlled drug release, tissue engineering, and other biomedical applications due to their ability to form colloidal systems and tunable properties. This review focuses on recent advancements in the synthesis, characterization, and biomedical applications of biodegradable block copolymers.

Thermo-Rheological and Shape Memory Properties of Block and Random Copolymers of Lactide and ε-Caprolactone

Biodegradable block and random copolymers have attracted numerous research interests in different areas, due to their capability to provide a broad range of properties. In this paper, an efficient strategy has been reported for preparing biodegradable PCL-PLA copolymers with improved thermal, mechanical and rheological properties. Two block-copolymers are synthesized by sequential addition of the cyclic esters lactide (L-LA or D,L-LA) and ε-caprolactone (CL) in presence of a dimethyl(salicylaldiminato)aluminium compound. The random copolymer of L-LA and CL was synthetized by using the same catalyst. Chain structure, molar mass, thermal, rheological and mechanical properties are characterized by NMR, SEC, TGA, DSC, Rheometry and DMTA. Experimental results show that by changing the stereochemistry and monomer distribution of the copolymers it is possible to obtain a variety of properties. Promising shape-memory properties are also observed in the di-block copolymers characterized by the co-crystallization of CL and L-LA segments. These materials show great potential to substitute oil-based polymers for packaging, electronics, and medicine applications.

Isoselective Polymerization of rac-Lactide by Highly Active Sequential {ONNN} Magnesium Complexes

The coordination chemistry and the activities in the ring-opening polymerization catalysis of racemic lactide (LA) of magnesium complexes of a series of {ONNN}-type sequential monoanionic ligands are described. All ligands include pyridyl and substituted-phenolate as peripheral groups. The ligands bearing either chiral or meso-bipyrrolidine cores led to single diastereomeric complexes, whereas the ligands bearing a diaminoethane core led to diastereomer mixtures. All {ONNN}Mg-X complexes [X=Cl, HMDS (hexamethyldisilazide)] led to highly active and isoselective catalysts. The complexes bearing the chiral bipyrrolidine core exhibited the highest activities (full consumption of 5000 equiv. of rac-LA at RT within 5 min) and highest isoselectivities (P_m =0.91), as well as a living character. The complexes of the meso-bipyrrolidine based ligands were almost as active and slightly less stereoselective, while those of the diaminoethane based ligands exhibited reduced activities and isoselectivities.

Ditopic bis(N,N',N'-substituted 1,2-ethanediamine) ligands: synthesis and coordination chemistry

The synthesis of two different types of bis(N,N',N'-substituted 1,2-ethanediamine)s, bridged either through the secondary (type 1) or tertiary (type 2) amine groups is reported. Selected protio-ligands have been applied in subsequent metallation reactions using aluminium, magnesium, tin, and zinc sources allowing to isolate five mononuclear and eight dinuclear complexes. All complexes have been fully characterized and their solid-state structures have been studied by means of single-crystal X-ray diffraction analysis. Nine of the 13 complexes carry reactive alkyl, amide or hydride groups, which indicates their potential as catalysts or supports for (transition) metals.