Selective sensing and visualization of pesticides by ABW-type metal–organic framework based luminescent sensors

A simple AIE probe to pesticide trifluralin residues in aqueous phase: Ultra-fast response, high sensitivity, and quantitative detection utilizing a portable platform

The threat from pesticide trifluralin residues to ecological environment and public health is becoming a growing problem. Thus, rapid and sensitive detection, particularly a simple and portable detected platform for trifluralin residues, are highly desired. Here, a small organic aggregation-induced emission (AIE) molecule (TPETPy) is facilely synthesized and applied to detect trifluralin both in lab and in actual water systems. Based on the photo-induced electron transfer (PET) mechanism, the emissive peak of TPETPy located at 475 nm in tetrahydrofuran (THF)/water mixture (ƒw = 90 %) under the excitation of 340 nm, decreases dramatically upon trace trifluralin addition and exhibits ultra-fast response (3 s), high sensitivity and selectivity, and good anti-interference ability. The fluorescence sensing correlation with the concentration of trifluralin shows good linearity in the range of 20-90 μg L-1 with the limit of detection of 6.28 μg L-1. Moreover, a portable smartphone-integrated detected platform based on fluorescent pattern Red/Green/Blue (RGB) values is first employed to realize the real-time and on-site quantitative fluorescent detection of trifluralin in actual water sources, featuring good accuracy and reproducibility. Hereby, this work provides not only a highly efficient trifluralin residues fluorescent probe but also a portable and straightforward operating platform to detect trifluralin pesticides quantitatively.

Hapten synthesis and a colloidal gold immunochromatographic strip assay to detect nitrofen and bifenox in fruits

In this study, we synthesized two haptens similar in structure to nitrofen (NIT), and screened out five monoclonal antibodies with the ability to recognize NIT and bifenox (BIF) by competitive ELISA, with the lowest IC₅₀ values of 0.87 ng mL^-1 and 0.86 ng mL^-1, respectively. The antibody 5G7 was selected to be combined with colloidal gold to establish a lateral flow immunochromatographic assay strip. This method was shown to qualitatively and quantitatively detect the residues of NIT and BIF in fruit samples. The visual limits of detection for qualitative detection were 5 μg kg^-1 and 10 μg kg^-1 for NIT and BIF, respectively. The calculated limits of detection for quantitative detection were 0.75 μg kg^-1, 1.77 μg kg^-1 and 2.55 μg kg^-1 respectively, for nitrofen in orange, apple and grapes, and 3.54 μg kg^-1, 4.96 μg kg^-1 and 5.26 μg kg^-1, respectively, for bifenox. Thus the strip assay could be used for rapid analysis of fruit samples.

Ultrathin 2D Eu3+@Zn-MOF Nanosheets: A Functional Nanoplatform for Highly Selective, Sensitive, and Visualized Detection of Organochlorine Pesticides in a Water Environment

Facile and rapid detection of residual organic pesticides on the fruits and vegetables has recently drawn increased attention in the food safety field. Herein, a surfactant-assisted solvothermal route with subsequent post-modification was designed for the preparation of Eu³⁺-functionated Zn-BDC ultrathin nanosheets (labeled as Eu³⁺@Zn-MOF-NS, BDC: 1,4-benzenedicarboxylate) with the thickness of 5 nm. The as-obtained Eu³⁺@Zn-MOF-NS could be homogeneously dispersed in aqueous systems to form a highly-stable collosol. Under the UV excitation of 325 nm, the as-obtained Eu³⁺@Zn-MOF-NS displayed red photoluminescence emission of Eu³⁺ ions, which could be notably quenched by an organochlorine pesticide, 2,6-dichloro-4-nitroaniline (DCNA), without interferences from ions, organic small molecules, and other pesticides. The detection limit and K_sv were 0.17 μM (35 ppb) and 3.2 × 10⁵ M^-1 in the water system, respectively. Moreover, the present 2D Eu³⁺@Zn-MOF sensor was also employed for the detection of DCNA in Chaohu Lake water and tap water and in apple, cabbage, and pakchoi samples with the relative standard deviation (RSD) ranging from 4.74 to 9.77%. Further investigations revealed that the competitive absorption between DCNA and the as-obtained Eu³⁺@Zn-MOF-NS resulted in the fluorescence quenching of the probe.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

A water-stable Zn4O-based MOF decorated with carbazolyl chromophores for multi-responsive fluorescence sensing of Fe3+, Cr2O72− and nitro-compounds

A MOF with strong deep blue light emission and high quantum efficiency has high selectivity and sensitivity for detecting 2,6-dichloro-4-nitroaniline.

Rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline as a pesticide based on a high-nuclear Cd(ii)–Sm(iii) nanocluster

A 56-metal Cd(ii)–Sm(iii) nanocluster (molecular sizes: 4.5 × 2.7 × 2.7 nm) was constructed for the rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline (DCN) as a pesticide.

Facile fabrication and luminescence properties of a new ZnII coordination polymer-based fluorescent sensor toward antibiotics

A new ZnII-based coordination polymer could selectively and sensitively recognize NFT and DCN via turn-off effect. Interestingly, a mixed matrix film for visualizable sensing has been successfully developed.

Zn(ii) and Co(ii) coordination polymers based on semi-rigid bis-pyridyl-bis-amide and angular dicarboxylate ligands: synthesis, structures and properties

Hydro(solvo)thermal reactions of N,N′-di(3-methylpyridyl)oxalamide (L1) and N,N′-di(4-methylpyridyl)oxalamide (L2) with angular dicarboxylic acids and metal salts afforded six new coordination polymers showing interesting properties.

Pyrene-Based Fluorescent Porous Organic Polymers for Recognition and Detection of Pesticides

Eating vegetables with pesticide residues over a long period of time causes serious adverse effects on the human body, such as acute poisoning, chronic poisoning, and endocrine system interference. To achieve the goal of a healthy society, it is an urgent issue to find a simple and effective method to detect organic pesticides. In this work, two fluorescent porous organic polymers, LNU-45 and LNU-47 (abbreviation for Liaoning University), were prepared using π-conjugated dibromopyrene monomer and boronic acid compounds as building units through a Suzuki coupling reaction. Due to the large π-electron delocalization effect, the resulting polymers revealed enhanced fluorescence performance. Significantly, in sharp contrast with the planar π-conjugated polymer framework (LNU-47), the distorted conjugated structure (LNU-45) shows a higher specific surface area and provides a broad interface for analyte interaction, which is helpful to achieve rapid response and detection sensitivity. LNU-45 exhibits strong fluorescence emission at 469 nm after excitation at 365 nm in THF solution, providing strong evidence for its suitability as a luminescent chemosensor for organic pesticides. The fluorescence quenching coefficients of LNU-45 for trifluralin and dicloran were 5710 and 12,000 (LNU-47 sample by ca. 1.98 and 3.38 times), respectively. Therefore, LNU-45 serves as an effective "real-time" sensor for the detection of trifluralin and dicloran with high sensitivity and selectivity.

Biomimetic self-assembly of lipase-zeolitic imidazolate frameworks with enhanced biosensing of protox inhibiting herbicides

Protox inhibiting herbicides such as nitrofen have detrimental effects on the environment and human health. The current work aims to fabricate a Candida rugosa lipase (CRL)-based electrochemical sensor for rapid and sensitive detection of protox inhibiting herbicides (nitrofen). We proposed the use of poly(vinylpyrrolidone) (PVP) and amino-acids to promote accumulation of Zn²⁺ ions at the surfaces of Candida rugosa lipase (CRL) and subsequently induce self-assembly of a CRL-zeolitic imidazolate framework (ZIF) structure. This process can be easily and rapidly achieved via a one-pot facile self-assembly method. Steady-state fluorescence spectroscopy indicated that CRL has undergone a conformational change following encapsulation within the ZIF structure. This conformational change is beneficial as the prepared PVP/Glu/CRL@ZIF-8 exhibited enhanced catalytic activity (207% of native CRL), and higher substrate affinity (lower K_m than native CRL) and showed high stability under harsh denaturing conditions. PVP/Glu/CRL@ZIF-8 was finally used for electrochemical biosensing of nitrofen. The fabricated biosensor has a wide linear detection range (0-100 μM), a lower limit of detection and a good recovery rate.

Efficient chemosensors for toxic pollutants based on photoluminescent Zn(ii) and Cd(ii) metal-organic networks

Optical sensors with high sensitivity and selectivity, as important analytical tools for chemical and environmental research, can be realized by straightforward synthesis of luminescent one-, two- and three-dimensional Zn(ii) and Cd(ii) crystalline coordination arrays (CPs and MOFs). In these materials with emission centers typically based on charge transfer and intraligand emissions, the quantitative detection of specific analytes, as pesticides or anions, is probed by monitoring real-time changes in their photoluminescence and color emission properties. Pesticides/herbicides have extensive uses in agriculture and household applications. Also, a large amount of metal salts of cyanide is widely used in several industrial processes such as mining and plastic manufacturing. Acute or chronic exposure to these compounds can produce high levels of toxicity in humans, animals and plants. Due to environmental concerns associated with the accumulation of these noxious species in food products and water supplies, there is an urgent and growing need to develop direct, fast, accurate and low-cost sensing methodologies. In this critical frontier, we discuss the effective strategies, chemical stability, luminescence properties, sensitivity and selectivity of recently developed hybrid Zn(ii)/Cd(ii)-organic materials with analytical applications in the direct sensing of pesticides, herbicides and cyanide ions in the aqueous phase and organic solvents.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

Recent advances in metal-organic frameworks for pesticide detection and adsorption

The large-scale use of pesticides such as organophosphate pesticides (OPPs) and organochlorine pesticides (OCPs) has led to serious environmental problems worldwide, and their high toxicity could cause serious damage to human health. It is crucial to remove and track them precisely in the environment and food resources. As novel nanomaterials, metal-organic frameworks (MOFs) have attracted significant attention in the fields of adsorption and luminescence sensing due to their rich topology, tunable pore size and shape, high surface area, and abundant active sites. Luminescent metal-organic frameworks (LMOFs) have sprung up as great potential chemical sensors to detect pesticides with fast response, high sensitivity, high selectivity and easy operation. Therefore, in this highlight, we focus on recent progress of MOFs in sensing and adsorbing pesticides, as well as in the possible mechanism of sensing, so as to attract more attention to pesticide detection and adsorption.