Cyclometalation of lanthanum(iii) based MOF for catalytic hydrogenation of carbon dioxide to formate

Hydrogenation of Carbon Dioxide to Formate by Noble Metal Catalysts Supported on a Chemically Stable Lanthanum Rod-Metal-Organic Framework

The conversion of carbon dioxide to formate is of great importance for hydrogen storage as well as being a step to access an array of olefins. Herein, we have prepared a JMS-5 metal-organic framework (MOF) using a bipyridyl dicarboxylate linker, with the molecular formula [La₂(bpdc)_3/2(dmf)₂(OAc)₃]·dmf. The MOF was functionalized by cyclometalation using Pd(II), Pt(II), Ru(II), Rh(III), and Ir(III) complexes. All metal catalysts supported on JMS-5 showed activity for CO₂ hydrogenation to formate, with Rh(III)@JMS-5a and Ir(III)@JMS-5a yielding 4319 and 5473 TON, respectively. X-ray photoelectron spectroscopy of the most active catalyst Ir(III)@JMS-5a revealed that the iridium binding energies shifted to lower values, consistent with formation of Ir-H active species during catalysis. The transmission electron microscopy images of the recovered catalysts of Ir(III)@JMS-5a and Rh(III)@JMS-5a did not show any nanoparticles. This suggests that the catalytic activity observed was due to Ir(III) and Rh(III). The high activity displayed by Ir(III)@JMS-5a and Rh(III)@JMS-5a compared to using the Ir(III) and Rh(III) complexes on their own is attributed to the stabilization of the Ir(III) and Rh(III) on the nitrogen and carbon atom of the MOF backbone.

Two novel metal-organic frameworks functionalised with pentamethylcyclopentadienyl iridium(III) chloride for catalytic conversion of carbon dioxide to formate

Hydrogenation of CO₂ to formate is a vital reaction, because formate is an excellent hydrogen carrier, which yields blue hydrogen. Blue hydrogen is comparatively cheaper and attractive as the world envisions the hydrogen economy. In this work, two isostructural lanthanide-based MOFs (JMS-6 and JMS-7 [Ln(bpdc)_3/2(dmf)₂(H₂O)₂]_n) were prepared and used as support materials for molecular catalysts. The bipyridyl MOF backbone were functionalised using pentamethylcyclopentadienyl iridium(III) chloride to give Ir(III)@JMS-6a and Ir(III)@JMS-7a. XPS of the functionalised MOFs show downfield shifts in the N 1s binding energy indicating successful grafting of the complex to the MOF. Hydrogenation experiments in the presence of an organic base showed that the functionalised MOFs were active towards converting CO₂ to formate. Ir(III)@JMS-6a and Ir(III)@JMS-7a exhibited the highest turnover numbers of 813 and 621 respectively. ICP-OES indicated insignificant leaching during catalysis. TEM images and XPS data of the recovered catalyst ruled out the presence of Ir(0), confirming that the activity observed was attributed to the molecular Iridium(III) centres.

A hexagon based Mn(II) rod metal-organic framework - structure, SF6 gas sorption, magnetism and electrochemistry

A manganese(II) metal-organic framework based on the hexatopic hexakis(4-carboxyphenyl)benzene, cpb^6-: [Mn₃(cpb)(dmf)₃], was solvothermally prepared showing a Langmuir area of 438 m² g^-1, rapid uptake OF sulfur hexafluoride (SF₆) as well as electrochemical and magnetic properties, while single crystal diffraction reveals an unusual rod-MOF topology.

Synthesis and characterization of lanthanum-based metal organic framework decorated polyaniline for effective adsorption of lead ions from aqueous solutions

The novel La-MOF@x%PANI composite was synthesized via a two-step procedure with ultra-sonication, and the adsorption mechanism of Pb²⁺ ions from synthetic aqueous solutions was systematically studied. The Pb²⁺ adsorption on the La-MOF@x%PANI was evaluated by the Fourier transform infrared spectroscopy, powder X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray analysis, Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, and elemental mapping analyses. The effects of the adsorption-influencing parameters, including contact time, solution pH, and co-existing cations on the maximum adsorption capacity of Pb²⁺ onto the prepared composite material were investigated. Moreover, the adsorption of Pb²⁺ ions could be eliminated with rapid adsorption kinetics using the water-stable La-MOF@x%PANI composite. The as-synthesized La-MOF@50%PANI exhibited excellent adsorption performance toward Pb²⁺ ions with an extraordinary adsorption capacity of 185.19 mg/g at pH 6. The Pb²⁺ adsorption onto the La-MOF@x%PANI composite follows the pseudo-second-order kinetics and fits well with the Langmuir isotherm model, indicating the Pb²⁺ adsorption depended on the solution pH as the adsorption mechanism was mainly governed by the electrostatic attraction. Notably, La-MOF@x%PANI composite possesses outstanding regeneration ability and stability after up to four successive cycles. The satisfactory findings reflect that the La-MOF@50%PANI hybrid composite holds a great promise for remediating Pb²⁺ ions from aqueous environments.

Chiral Lanthanum Metal-Organic Framework with Gated CO2 Sorption and Concerted Framework Flexibility

A metal–organic framework (MOF) CTH-17 based on lanthanum(III) and the conformationally chiral linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)benzene, cpb^6–: [La₂(cpb)]·1.5dmf was prepared by the solvothermal method in dimethylformamide (dmf) and characterized by variable-temperature X-ray powder diffraction (VTPXRD), variable-temperature X-ray single-crystal diffraction (SCXRD), and thermogravimetric analysis (TGA). CTH-17 is a rod-MOF with new topology och. It has high-temperature stability with Sohncke space groups P6₁22/P6₅22 at 90 K and P622 at 300 and 500 K, all phases characterized with SCXRD and at 293 K also with three-dimensional (3D) electron diffraction. VTPXRD indicates a third phase appearing after 620 K and stable up to 770 K. Gas sorption isotherms with N₂ indicate a modest surface area of 231 m² g^–1 for CTH-17, roughly in agreement with the crystal structure. Carbon dioxide sorption reveals a gate-opening effect of CTH-17 where the structure opens up when the loading of CO₂ reaches approximately ∼0.45 mmol g^–1 or 1 molecule per unit cell. Based on the SCXRD data, this is interpreted as flexibility based on the concerted movements of the propeller-like hexatopic cpb linkers, the movement intramolecularly transmitted by the π–π stacking of the cpb linkers and helped by the fluidity of the LaO₆ coordination sphere. This was corroborated by density functional theory (DFT) calculations yielding the chiral phase (P622) as the energy minimum and a completely racemic phase (P6/mmm), with symmetric cpb linkers representing a saddle point in a racemization process.

Hydrogenation of Carbon Dioxide to Formate Using a Cadmium-Based Metal–Organic Framework Impregnated with Nanoparticles

The burning of fossil fuels to meet energy demands has increased carbon dioxide (CO2) in the atmosphere, causing global warming and associated climate change. Therefore, new materials are being developed to capture CO2 effectively, limit its impact on the environment, and store and/or utilise it as an abundant C1 building block. In this study, we investigate a cadmium(II) metal–organic framework, [Cd(bdc)(DMF)]n (MOF1), synthesised by treating benzene-1,4-dicarboxylic acid with four equivalents of [Cd(NO3)2]. MOF1 was then used to support Pd, Ni, and Pt nanoparticles in forming MOF1/Pd MOF1/Ni and MOF1/Pt, respectively. These MOF-based materials were characterised using powder X-ray diffraction (PXRD), Fourier-transform infrared (FTIR), energy-dispersive X-ray spectroscopy (EDX), selected area electron diffraction (SAED), and high-resolution transmission electron microscopy (HR-TEM). MOF1/Pd MOF1/Ni and MOF1/Pt proved highly active in the catalytic hydrogenation of CO2 to formate selectively; in contrast, MOF1 did not hydrogenate CO2 to formate. The MOF1/Pd, MOF1/Ni, and MOF1/Pt catalysts produced formate selectively, with the highest TON of 1500 (TOF of 69 h−1) achieved using MOF1/Pd as the catalyst at 170 °C within 2 h. A formate yield of 98% was obtained, which demonstrates that the combination of nanoparticles and MOFs greatly enhances the catalytic activity of the active sites.

Rare-Earth-Based Metal-Organic Frameworks as Multifunctional Platforms for Catalytic Conversion

The development of catalytic conversion is very important for human society. In the catalytic process, metal-organic frameworks (MOFs) can be utilized to obtain effective catalysts for their porous structures and adjustable properties. In addition, the introduction of rare-earth (RE) elements with unique properties for catalysts can realize good catalytic performances. Thus, the RE-MOF related catalysts for catalytic conversion are summarized. Due to the cooperation of RE elements and porous MOF structures, the RE-based MOFs can be used as promising catalysts or precursors/supports for other catalysts in the areas of energy conversion, environmental governance, and organic synthesis. These aggregated studies highlight the RE-MOFs as promising candidates for catalytic conversion.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Metal-organic frameworks (MOFs) have emerged as promising materials and have attracted researchers due to their unique chemical and physical properties-design flexibility, tuneable pore channels, a high surface-to-volume ratio that allow their distinct application in diverse research fields-gas storage, gas separation, catalysis, adsorption, drug delivery, ion exchange, sensing, etc. The rapidly growing CO₂ in the atmosphere is a global concern due to the excessive use of fossil fuels in the current era. CO₂ is the prime cause of global warming and should be ameliorated either through adsorption or conversion into value-added products to protect the environment and mankind. Nowadays, MOFs are exploited as a photocatalyst for applications of CO₂ reduction. Since the use of semiconductors limits the use of visible light for photocatalytic reduction of CO₂, MOFs are promising options. The current review describes recent development in the application of MOFs as host, composites, and their derivatives in photocatalytic reduction of CO₂ to CO and different organic chemicals (HCOOH, CH₃OH, CH₄). Efficient charge separation and visible light absorption by incorporation of active sites for efficient photocatalysis have been discussed. The selection of material for high CO₂ uptake and potential strategies for the rational design and development of high-performance catalysts are outlined. Major challenges and future perspectives have also been discussed at the last of the review.

Synthesis and Characterization of 2D Metal-Organic Frameworks for Adsorption of Carbon Dioxide and Hydrogen

The reaction of Cd(NO3)2·4H2O and Zn(NO3)2·6H2O with the bipyridyl dicarboxylate ligand H2bpydc (2,2'-bipyridine-4,4'-dicarboxylic acid) afforded two porous metal organic frameworks [Cd(bpydc)2(DMF)2·2DMF]n (JMS-3) and [Zn(bpydc)(DMF)·DMF]n (JMS-4). X-ray diffraction studies revealed that both JMS-3 and JMS-4 crystallize in the monoclinic crystal. The MOFs possess 2D interdigited networks with (sql) topology. Sorption studies showed that the activated phase of JMS-3 had CO2 volumetric uptakes of 26.50 and 30.89 cm3 (STP) g-1 (1.18 and 1.39 mmol g-1) whist JMS-4 gave 10.96 and 16.08 cm3 (STP) g-1 (0.49 and 0.71 mmol g-1) at 298 and 273 K respectively.

Organic-Inorganic Hybrid Nanomaterials for Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction (ECR) to value-added chemicals and fuels is regarded as an effective strategy to mitigate climate change caused by CO₂ from excess consumption of fossil fuels. To achieve CO₂ conversion with high faradaic efficiency, low overpotential, and excellent product selectivity, rational design and synthesis of efficient electrocatalysts is of significant importance, which dominates the development of ECR field. Individual organic molecules or inorganic catalysts have encountered a bottleneck in performance improvement owing to their intrinsic shortcomings. Very recently, organic-inorganic hybrid nanomaterials as electrocatalysts have exhibited high performance and interesting reaction processes for ECR due to the integration of the advantages of both heterogeneous and homogeneous catalytic processes, attracting widespread interest. In this work, the recent advances in designing various organic-inorganic hybrid nanomaterials at the atomic and molecular level for ECR are systematically summarized. Particularly, the reaction mechanism and structure-performance relationship of organic-inorganic hybrid nanomaterials toward ECR are discussed in detail. Finally, the challenges and opportunities toward controlled synthesis of advanced electrocatalysts are proposed for paving the development of the ECR field.

Metal-Organic Frameworks with Hexakis(4-carboxyphenyl)benzene: Extensions to Reticular Chemistry and Introducing Foldable Nets

Nine metal-organic frameworks have been prepared with the hexagon-shaped linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)benzene (H6cpb) by solvothermal reactions in dimethylformamide (dmf) or dimethylacetamide (dmac) with acetic acid or formic acid as modulators: [Bi2(cpb)(acetato)2(dmf)2]·2dmf CTH-6 forms a rtl-net; 2(H2NMe2)[Cu2(cpb)] CTH-7 forms a kgd-net; [Fe4(cpb)(acetato)2(dmf)4] CTH-8 and [Co4(cpb)(acetato)2(dmf)4] CTH-9 are isostructural and form yav-nets; 2(HNEt3)[Fe2(cpb)] CTH-10 and the two polymorphs of 2(H2NMe2)[Zn2(cpb)]·1.5dmac, Zn-MOF-888 and CTH-11, show kgd-nets; [Cu2(cpb)(acetato)2(dmf)2]·2dmf, CTH-12, forms a mixed coordination and hydrogen-bonded sql-net; and 2(H2NMe2)[Zn2(cpb)] CTH-13, a similarly mixed yav-net. Surface area values (Brunauer-Emmett-Teller, BET) range from 34 m2 g-1 for CTH-12 to 303 m2 g-1 for CTH-9 for samples activated at 120 °C in dynamic vacuum. All compounds show normal (10-fold higher) molar CO2 versus N2 uptake at 298 K, except the 19-fold CO2 uptake for CTH-12 containing Cu(II) dinuclear paddle-wheels. We also show how perfect hexagons and triangles can combine to a new 3D topology laf, a model of which gave us the idea of foldable network topologies, as the laf-net can fold into a 2D form while retaining the local geometry around each vertex. Other foldable nets identified are cds, cds-a, ths, sqc163, clh, jem, and tfc covering the basic polygons and their combinations. The impact of this concept on "breathing" MOFs is discussed. I2 sorption, both from gas phase and from MeOH solution, into CTH-7 were studied by time of flight secondary ion mass spectrometry (ToF-SIMS) on dried crystals. I2 was shown to have penetrated the crystals, as layers were consecutively peeled off by the ion beam. We suggest ToF-SIMS to be a method for studying sorption depth profiles of MOFs.

Integration of fluorescent probes into metal–organic frameworks for improved performances

Recent years have witnessed a rapid development of fluorescent probes in both analytical sensing and optical imaging. Enormous efforts have been devoted to the regulation of fluorescent probes during their development, such as improving accuracy, sensitivity, selectivity, recyclability and overcoming the aggregation-caused quenching effect. Metal–organic frameworks (MOFs) as a new class of crystalline porous materials possess abundant host–guest chemistry, based on which they display a great application potential in regulating fluorescent probes. This review summarized the research works on the regulation of fluorescent probes using MOFs, with emphasis on the methods of integrating fluorescent probes into MOFs, the regulation effects of MOFs on fluorescent probes, the superiorities of MOFs in regulating fluorescent probes, and the outlook of this subject. It is desirably hoped that this review can provide a useful reference for the researchers interested in this field.

This review surveyed the research works for the regulation of fluorescent probes with metal–organic frameworks based on host–guest chemistry.

Emerging trends in porous materials for CO2 capture and conversion

This review highlights the recent progress in porous materials (MOFs, zeolites, POPs, nanoporous carbons, and mesoporous materials) for CO₂ capture and conversion.