Enzyme immobilization inside the porous wood structure: a natural scaffold for continuous-flow biocatalysis

Pyrazine derivative synthesis in a continuous-flow system: a green synthesis of pyrazinamide from pyrazine esters and amines catalyzed by Lipozyme® TL IM from Thermomyces lanuginosus

Pyrazinamide derivatives have been extensively studied for their biological activities, such as anti-tuberculosis activity and antiviral activities. In this work, a continuous-flow system was developed for the synthesis of pyrazinamide derivatives from pyrazine esters and amines (aliphatic amine, benzylamines and morpholine) catalyzed by Lipozyme® TL IM from Thermomyces lanuginosus, which was used for the first time. The reaction parameters including solvent, substrate ratio, reaction temperature and reaction time/flow rate were also studied in detail. A total of 23 pyrazinamide derivatives can be obtained through this method in parallel. Compared with other works, this method can be conducted at 45 °C for 20 min in a greener tert-amyl alcohol solvent and maximum yield (91.6%) was obtained as well. In brief, a more efficient and greener method for the synthesis of pyrazinamide derivatives was developed with good scalability, various substrates including aliphatic amines, benzylamines and morpholines can be applied to this method and achieve a desirable yield. Through the construction and research of amide bonds, this method provides a greener and more efficient biocatalytic continuous technology for the development of pyrazine-derived drugs, and provides a basis for the rapid synthesis of pyrazine-derived drugs in the future.

Magnetic Nanoparticle Support with an Ultra-Thin Chitosan Layer Preserves the Catalytic Activity of the Immobilized Glucose Oxidase

Here, we developed magnetically recoverable biocatalysts based on magnetite nanoparticles coated with an ultra-thin layer (about 0.9 nm) of chitosan (CS) ionically cross-linked by sodium tripolyphosphate (TPP). Excessive CS amounts were removed by multiple washings combined with magnetic separation. Glucose oxidase (GOx) was attached to the magnetic support via the interaction with N-hydroxysuccinimide (NHS) in the presence of carbodiimide (EDC) leading to a covalent amide bond. These steps result in the formation of the biocatalyst for D-glucose oxidation to D-gluconic acid to be used in the preparation of pharmaceuticals due to the benign character of the biocatalyst components. To choose the catalyst with the best catalytic performance, the amounts of CS, TPP, NHS, EDC, and GOx were varied. The optimal biocatalyst allowed for 100% relative catalytic activity. The immobilization of GOx and the magnetic character of the support prevents GOx and biocatalyst loss and allows for repeated use.

Fe loading 3D micro-meso-porous carbon sphere derived from natural cellulose of sawdust activating peroxymonosulfate for degradation of enrofloxacin

Fe loading 3D micro-meso-porous carbon sphere (Fe@3C-2N) was derived from natural cellulose of sawdust and melamine through sodium alginate and ferric chloride cross-linking followed by carbonization processes, which served as peroxymonosulfate (PMS) activators for enrofloxacin (ENR) degradation. The cellulose was produced by the delignification of sawdust with sodium chlorite. The delignification of sawdust and the addition of melamine increased the porosity and electron transport capacity of Fe@3C-2N. When the dosages of Fe@3C-2N and PMS were 0.60 g L-1 and 0.20 g L-1 respectively, the degradation rate of ENR (20 mg L-1) reached 92.17 % within 80 min, suggesting the satisfactory activation performance of PMS. The good structural stability of Fe@3C-2N makes it suitable for use as packing in continuous flow reactors for wastewater treatment. Quenching experiments and electron paramagnetic resonance (EPR) suggested that SO4•- and 1O2 were the dominant reactive oxygen species (ROSs) in Fe@3C-2N/PMS system. X-ray photoelectron spectroscopy (XPS) revealed that Fe3C, pyrrolic N and graphitic N were the potential active sites.

A systematic review about affinity tags for one-step purification and immobilization of recombinant proteins: integrated bioprocesses aiming both economic and environmental sustainability

The present study reviewed and discussed the promising affinity tags for one-step purification and immobilization of recombinant proteins. The approach used to structure this systematic review was The Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) methodology. The Scopus and Web of Science databases were used to perform the bibliographic survey by which 267 articles were selected. After the inclusion/exclusion criteria and the screening process, from 25 chosen documents, we identified 7 types of tags used in the last 10 years, carbohydrate-binding module tag (CBM), polyhistidine (His-tag), elastin-like polypeptides (ELPs), silaffin-3-derived pentalysine cluster (Sil3k tag), N-acetylmuramidase (AcmA tag), modified haloalkane dehalogenase (HaloTag®), and aldehyde from a lipase polypeptide (Aldehyde tag). The most used bacterial host for expressing the targeted protein was Escherichia coli and the most used expression vector was pET-28a. The results demonstrated two main immobilization and purification methods: the use of supports and the use of self-aggregating tags without the need of support, depending on the tag used. Besides, the chosen terminal for cloning the tag proved to be very important once it could alter enzyme activity. In conclusion, the best tag for protein one-step purification and immobilization was CBM tag, due to the eco-friendly supports that can be provided from industry wastes, the fast immobilization with high specificity, and the reduced cost of the process.

Preparation and characterization of permeability and mechanical properties of three-dimensional porous stainless steel

Porous materials are indispensable in biomedical and chemical catalysis fields, but it is still a challenging task to fabricate them with excellent permeability and mechanical properties at the same time. Herein, a new type of three-dimensional porous stainless steel (3DPSS) was fabricated by compression moulding and vacuum sintering. The pore size distribution, air permeability, and mechanical properties of 3DPSS were studied. The results indicated that the radial air permeability reached 3.1 × 10^-11 m², which was approximately 19.7 times greater than the axial air permeability. Interestingly, the axial compressive strength was 91.3% higher than the radial compressive strength and reached 1249 MPa, which was significantly better than that of conventional porous stainless steel and porous titanium as well as porous high entropy alloys. The main characteristics of 3DPSS fracture were metallurgical bonding surface fracture, necking fracture and shear fracture of the wire mesh. This study provides an effective method for the preparation of three-dimensional porous materials, which is convenient for industrial production. It is of great significance to expand the potential application range of porous materials, in particular in fields requiring comprehensive permeability and mechanical properties.

Laccase-mediated synthesis of bioactive natural products and their analogues

Laccases are a class of multicopper oxidases that catalyse the one-electron oxidation of four equivalents of a reducing substrate, with the concomitant four-electron reduction of dioxygen to water. Typically, they catalyse many anabolic reactions, in which mostly phenolic metabolites were subjected to oxidative coupling. Alternatively, laccases catalyse the degradation or modification of biopolymers like lignin in catabolic processes. In recent years, laccases have proved valuable and green biocatalysts for synthesising compounds with therapeutic value, including antitumor, antibiotic, antimicrobial, and antioxidant agents. Further up to date applications include oxidative depolymerisation of lignin to gain new biomaterials and bioremediation processes of industrial waste. This review summarizes selected examples from the last decade's literature about the laccase-mediated synthesis of biologically active natural products and their analogues; these will include lignans and neolignans, dimeric stilbenoids, biflavonoids, biaryls and other compounds of potential interest for the pharmaceutical industry. In addition, a short section about applications of laccases in natural polymer modification has been included.

Natural Wood-Based Catalytic Membrane Microreactors for Continuous Hydrogen Generation

The development of controlled processes for continuous hydrogen generation from solid-state storage chemicals such as ammonia borane is central to integrating renewable hydrogen into a clean energy mix. However, to date, most reported platforms operate in batch mode, posing a challenge for controllable hydrogen release, catalyst reusability, and large-scale operation. To address these issues, we developed flow-through wood-based catalytic microreactors, characterized by inherent natural oriented microchannels. The prepared structured catalysts utilize silver-promoted palladium nanoparticles supported on metal-organic framework (MOF)-coated wood microreactors as the active phase. Catalytic tests demonstrate their highly controllable hydrogen production in continuous mode, and by adjusting the ammonia borane flow and wood species, we reach stable productivities of up to 10.4 cm_H2³ min^-1 cm_cat^-3. The modular design of the structured catalysts proves readily scalable. Our versatile approach is applicable for other metals and MOF combinations, thus comprising a sustainable and scalable platform for catalytic dehydrogenations and applications in the energy-water nexus.

Sustainability in wood materials science: an opinion about current material development techniques and the end of lifetime perspectives

Wood is considered the most important renewable resource for a future sustainable bioeconomy. It is traditionally used in the building sector, where it has gained importance in recent years as a sustainable alternative to steel and concrete. Additionally, it is the basis for the development of novel bio-based functional materials. However, wood's sustainability as a green resource is often diminished by unsustainable processing and modification techniques. They mostly rely on fossil-based precursors and yield inseparable hybrids and composites that cannot be reused or recycled. In this article, we discuss the state of the art of environmental sustainability in wood science and technology. We give an overview of established and upcoming approaches for the sustainable production of wood-based materials. This comprises wood protection and adhesion for the building sector, as well as the production of sustainable wood-based functional materials. Moreover, we elaborate on the end of lifetime perspective of wood products. The concept of wood cascading is presented as a possibility for a more efficient use of the resource to increase its beneficial impact on climate change mitigation. We advocate for a holistic approach in wood science and technology that not only focuses on the material's development and production but also considers recycling and end of lifetime perspectives of the products. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

The Accessibility of the Cell Wall in Scots Pine (Pinus sylvestris L.) Sapwood to Colloidal Fe3O4 Nanoparticles

This work presents a rapid and facile way to access the cell wall of wood with magnetic nanoparticles (NPs), providing insights into a method of wood modification to prepare hybrid bio-based functional materials. Diffusion-driven infiltration into Scots pine (Pinus sylvestris L.) sapwood was achieved using colloidal Fe3O4 nanoparticles. Optical microscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy, and X-ray powder diffraction analyses were used to detect and assess the accessibility of the cell wall to Fe3O4. The structural changes, filling of tracheids (cell lumina), and NP infiltration depth were further evaluated by performing X-ray microcomputed tomography analysis. Fourier transform infrared spectroscopy was used to assess the chemical changes in Scots pine induced by the interaction of the wood with the solvent. The thermal stability of Fe3O4-modified wood was studied by thermogravimetric analysis. Successful infiltration of the Fe3O4 NPs was confirmed by measuring the magnetic properties of cross-sectioned layers of the modified wood. The results indicate the feasibility of creating multiple functionalities that may lead to many future applications, including structural nanomaterials with desirable thermal properties, magnetic devices, and sensors.

Evaluating the Green Credentials of Flow Chemistry towards Industrial Applications

Continuous flow chemistry is becoming an established technology platform that finds frequent application in industrial chemical manufacture with support and endorsements by the FDA for pharmaceuticals. Amongst the various advantages that are commonly cited for flow chemistry over batch processing, sustainability continues to require further advances and joint efforts by chemists and chemical engineers in both academia and industry. This short review highlights developments between 2015 and early 2021 that positively impact on the green credentials associated with flow chemistry, specifically when applied to the preparation of pharmaceuticals. An industrial perspective on current challenges is provided to whet discussion and stimulate further investment towards achieving greener modern synthetic technologies.

1 Introduction

2 Subject Areas and Relevant Case Studies

3 Industrial Outlook on Future Sustainability Driven through Continuous Manufacturing Approaches

4 Conclusions and Outlook

Enzymatic characteristics of immobilized carbonic anhydrase and its applications in CO2 conversion

Native carbonic anhydrase (CA) has been widely used in several different applications due to its catalytic function in the interconversion of carbon dioxide (CO₂) and carbonic acid. However, subject to its stability and recyclability, native CA often deactivates when in harsh environments, which restricts its applications in the commercial market. Maintaining the stability and high catalytic activity of CA is challenging. Immobilization provides an effective route that can improve enzymatic stability. Through the interaction of covalent bonds and van der Waals forces, water-soluble CA can be combined with various insoluble supports to form water-insoluble immobilized CA so that CA stability and utilization can be greatly improved. However, if the immobilization method or immobilization condition is not suitable, it often leads to a decrease in CA activity, reducing the application effects on CO₂ conversion. In this review, we discuss existing immobilization methods and applications of immobilized CA in the environmental field, such as the mineralization of carbon dioxide and multienzyme cascade catalysis based on CA. Additionally, prospects in current development are outlined. Because of the many outstanding and superior properties after immobilization, CA is likely to be used in a wide variety of scientific and technical areas in the future.

Development of a continuous-flow system with immobilized biocatalysts towards sustainable bioprocessing

Implementing immobilized biocatalysts in continuous-flow systems can enable a sustainable process through enhanced enzyme stability, better transport and process continuity as well as simplified recycle and downstream processing.

Biocatalysis with Laccases: An Updated Overview

Laccases are multicopper oxidases, which have been widely investigated in recent decades thanks to their ability to oxidize organic substrates to the corresponding radicals while producing water at the expense of molecular oxygen. Besides their successful (bio)technological applications, for example, in textile, petrochemical, and detoxifications/bioremediations industrial processes, their synthetic potentialities for the mild and green preparation or selective modification of fine chemicals are of outstanding value in biocatalyzed organic synthesis. Accordingly, this review is focused on reporting and rationalizing some of the most recent and interesting synthetic exploitations of laccases. Applications of the so-called laccase-mediator system (LMS) for alcohol oxidation are discussed with a focus on carbohydrate chemistry and natural products modification as well as on bio- and chemo-integrated processes. The laccase-catalyzed Csp2-H bonds activation via monoelectronic oxidation is also discussed by reporting examples of enzymatic C-C and C-O radical homo- and hetero-couplings, as well as of aromatic nucleophilic substitutions of hydroquinones or quinoids. Finally, the laccase-initiated domino/cascade synthesis of valuable aromatic (hetero)cycles, elegant strategies widely documented in the literature across more than three decades, is also presented.