Investigation of Methylcyclopentadiene Reactivity: Abstraction Reactions and Methylcyclopentadienyl Radical Unimolecular Decomposition

Understanding the reactivities of methylcyclopentadiene and the methylcyclopentadienyl radical is important in order to improve our comprehension of the chemical kinetics leading to the formation, decomposition, and growth of the first aromatic ring, as it has been shown that five-membered-ring species are important intermediates in the reaction kinetics of aromatic species. In this work, the rate constants of some key H-abstraction reactions from methylcyclopentadiene to produce the methylcyclopentadienyl radical and the formation of fulvene and benzene from the latter are theoretically determined. Rate constants are evaluated using the ab initio transition state theory-based master equation approach, determining structures and Hessians of all stationary points at the ωB97X-D/aug-cc-pVTZ level, energies at the CCSD(T) level extrapolated to the complete basis set limit, RRKM rate constants using conventional and variational transition state theory, and phenomenological rate constants through the solution of the one-dimensional master equation. Variational corrections are determined in both internal and Cartesian coordinates, and it is found that the choice of the coordinate system can impact the accuracy of the calculated rate constants by up to a factor of 4 for H-abstraction reactions and 2 for the unimolecular decomposition of the methylcyclopentadienyl radical. The calculated rate constants are in good agreement with the available literature data. Prompt dissociation of methylcyclopentadienyl radicals accessed following H-abstraction from methylcyclopentadiene was also investigated, and the corresponding rate constants were determined; the results show that prompt dissociation plays a key role under combustion conditions. Finally, lumping of theoretically derived rate constants to account for methylcyclopentadiene ⇄ methylcyclopentadienyl tautomerism allowed the derivation of a simplified set of rate constants suitable to be inserted into kinetic mechanisms.

Free radical mechanism of toxic organic compound formations from o-chlorophenol

Organic free radical intermediates are pivotal to our understanding of toxic chemicals formation from chlorophenols that widely exist in thermal processes. However, in most cases, multiple free radical intermediates exist and produce complex spectra that are hard to deconvolute. Identification of free radical intermediates is the current difficulty for detailed formation mechanisms of toxic products from chlorophenols. In this study, a universal bottom-up method was developed to identify the organic free radical intermediates. Candidate organic free radicals were firstly speculated according to the critical parameters obtained from experimental electron paramagnetic resonance (EPR) spectra and the calculated bond dissociation energies of precursors. Their theoretical spectra were then used retrospectively to justify the accordance with the experimental EPR spectra. Identification of the organic free radicals provides straightforward evidence for the formation pathways of pollutants from chlorophenol. Internal factors influencing formation of radical intermediates and the toxic products were also studied, including the ortho effect of the precursor, spin densities of the organic free radical intermediates, and steric hindrance effects of the molecular intermediates. In combination of the experimental results and theoretical calculations, detailed formation mechanisms of toxic pollutants intermediating by organic free radicals from thermal oxidation of chlorophenol were strongly evidenced.

Crossed-Beam and Theoretical Studies of the O(3P, 1D) + Benzene Reactions: Primary Products, Branching Fractions, and Role of Intersystem Crossing

Reliable modeling of hydrocarbon oxidation relies critically on knowledge of the branching fractions (BFs) as a function of temperature (T) and pressure (p) for the products of the reaction of the hydrocarbon with atomic oxygen in its ground state, O(³P). During the past decade, we have performed in-depth investigations of the reactions of O(³P) with a variety of small unsaturated hydrocarbons using the crossed molecular beam (CMB) technique with universal mass spectrometric (MS) detection and time-of-flight (TOF) analysis, combined with synergistic theoretical calculations of the relevant potential energy surfaces (PESs) and statistical computations of product BFs, including intersystem crossing (ISC). This has allowed us to determine the primary products, their BFs, and extent of ISC to ultimately provide theoretical channel-specific rate constants as a function of T and p. In this work, we have extended this approach to the oxidation of one of the most important species involved in the combustion of aromatics: the benzene (C₆H₆) molecule. Despite extensive experimental and theoretical studies on the kinetics and dynamics of the O(³P) + C₆H₆ reaction, the relative importance of the C₆H₅O (phenoxy) + H open-shell products and of the spin-forbidden C₅H₆ (cyclopentadiene) + CO and phenol adduct closed-shell products are still open issues, which have hampered the development of reliable benzene combustion models. With the CMB technique, we have investigated the reaction dynamics of O(³P) + benzene at a collision energy (E_c) of 8.2 kcal/mol, focusing on the occurrence of the phenoxy + H and spin-forbidden C₅H₆ + CO and phenol channels in order to shed further light on the dynamics of this complex and important reaction, including the role of ISC. Concurrently, we have also investigated the reaction dynamics of O(¹D) + benzene at the same E_c. Synergistic high-level electronic structure calculations of the underlying triplet/singlet PESs, including nonadiabatic couplings, have been performed to complement and assist the interpretation of the experimental results. Statistical (RRKM)/master equation (ME) computations of the product distribution and BFs on these PESs, with inclusion of ISC, have been performed and compared to experiment. In light of the reasonable agreement between the CMB experiment, literature kinetic experimental results, and theoretical predictions for the O(³P) + benzene reaction, the so-validated computational methodology has been used to predict (i) the BF between the C₆H₅O + H and C₅H₆ + CO channels as a function of collision energy and temperature (at 0.1 and 1 bar), showing that their increase progressively favors radical (phenoxy + H)-forming over molecule (C₅H₆ + CO and phenol stabilization)-forming channels, and (ii) channel-specific rate constants as a function of T and p, which are expected to be useful for improved combustion models.

Conformational Space, IR-Induced, and UV-Induced Chemistry of Carvacrol Isolated in a Low-Temperature Argon Matrix

In this work, monomers of carvacrol (5-isopropyl-2-methylphenol), a natural monoterpene exhibiting wide range bioactivity, were trapped in a cryogenic argon matrix and characterized by infrared spectroscopy, while quantum chemical calculations at the B3LYP and MP2 levels were employed to characterize the conformational landscape of the isolated molecule. Four conformers have been localized on the potential energy surface, and the factors accounting for their relative stability were analyzed. The two most stable conformers of carvacrol, differing in the relative orientation of the isopropyl group and both having the OH group pointing away from the vicinal methyl fragment, were identified in the cryomatrix for the first time. The individual spectral signatures of the two conformers were distinguished based on the change in their relative abundance induced by exposing the matrix to broadband infrared light. Matrix-isolated carvacrol was also irradiated with broadband UV light (λ > 200 nm), which resulted in the cleavage of the OH group. Recombination of the released H atom at the ortho- or para-position of the ring resulted in the formation of alkyl-substituted cyclohexadienones. These were found to undergo subsequent valence and open-ring isomerizations, leading, respectively, to the formation of a Dewar isomer and open-chain conjugated ketenes. Decarbonylation of the photoproducts was also observed for longer irradiation times. A mechanistic analysis of the observed photochemical transformations is presented.

Formation of Environmentally Persistent Free Radicals during Thermochemical Processes and their Correlations with Unintentional Persistent Organic Pollutants

Attention is increasingly being paid to environmentally persistent free radicals (EPFRs), which are organic pollutants with the activities of free radicals and stabilities of organic pollutants. EPFRs readily form during thermal processes through the decomposition of organic precursors such as phenols, halogenated phenols, and quinone-type molecules, which are also important precursors of toxic unintentionally produced persistent organic pollutants (UPOPs). We have found that EPFRs are important intermediates for UPOP formation during thermal-related processes. However, interest in EPFRs is currently mostly focused on the toxicities and formation mechanisms of EPFRs themselves. Little information is available on the important roles EPFRs play in toxic UPOP formation during thermal processes. Here, we review the mechanisms involved in EPFR formation and transformation into UPOPs during thermal processes. The review is focused on typical EPFRs, including cyclopentadiene, phenoxy, and semiquinone radicals. The reaction temperature, metal species present, and oxygen concentration strongly affect EPFR and UPOP formation during thermal-related processes. Gaps in current knowledge and future directions for research into EPFR and UPOP formation, transformation, and control are presented. Understanding the relationships between EPFRs and UPOPs will allow synergistic control strategies to be developed for thermal-related industrial sources of EPFRs and UPOPs.

Pyrolysis and Combustion Chemistry of Pyrrole, a Reference Component for Bio-oil Surrogates: Jet-Stirred Reactor Experiments and Kinetic Modeling

Fast-pyrolysis bio-oils (FPBOs) obtained from lignocellulosic biomass are gaining attention as sustainable fuels for various applications, including the transport sector and power production. A significant fraction of bio-oils is constituted by nitrogen-containing compounds (N fuels) that should be considered when developing surrogate models for FPBOs. Moreover, the content of N fuels in FPBOs is expected to strongly contribute to the production of nitrogen oxides (NO _x ) directly from fuel-bound nitrogen (fuel NO _x ), in addition to the thermal NO _x formation pathways typical of high-temperature combustion conditions. This work investigates the pyrolysis and combustion chemistry of pyrrole (C₄H₅N), a candidate reference fuel component for FPBO surrogate models. Speciation measurements in an atmospheric pressure jet-stirred reactor have been performed for both pyrolysis and oxidation conditions. Pyrolysis experiments have been performed for 1% pyrrole/helium mixtures over the temperature range T = 925-1200 K. Oxidation experiments were carried out for 1% pyrrole/oxygen/helium mixtures at three equivalence ratios (φ = 0.5, 1.0, and 2.0) over the temperature range T = 700-1200 K. These new data significantly extend the number of experimental targets for kinetic model validation available at present for pyrrole combustion. After a thorough revision of previous theoretical and kinetic modeling studies, a preliminary kinetic model is developed and validated by means of comparison to new experimental data and those previously reported in the literature. The rate of production and sensitivity analyses highlight important pathways deserving further investigations for a better understanding of pyrrole and, more in general, N fuel combustion chemistry. A critical discussion on experimental challenges to be faced when dealing with pyrrole is also reported, encouraging further experimental investigation with advanced diagnostics.

Theoretical Study of the Extent of Intersystem Crossing in the O(3P) + C6H6 Reaction with Experimental Validation

The extent of intersystem crossing in the O(³P) + C₆H₆ reaction, a prototypical system for spin-forbidden reactions in oxygenated aromatic molecules, is theoretically evaluated for the first time. Calculations are performed using nonadiabatic transition-state theory coupled with stochastic master equation simulations and Landau-Zener theory. It is found that the dominant intersystem crossing pathways connect the T2 and S0 potential energy surfaces through at least two distinct minimum-energy crossing points. The calculated channel-specific rate constants and intersystem crossing branching fractions differ from previous literature estimates and provide valuable kinetic data for the investigation of benzene and polycyclic aromatic hydrocarbons oxidation in interstellar, atmospheric, and combustion conditions. The theoretical results are supported by crossed molecular beam experiments with electron ionization mass-spectrometric detection and time-of-flight analysis at 8.2 kcal/mol collision energy. This system is a suitable benchmark for theoretical and experimental studies of intersystem crossing in aromatic species.

Combustion of n-C3-C6 Linear Alcohols: An Experimental and Kinetic Modeling Study. Part I: Reaction Classes, Rate Rules, Model Lumping, and Validation

This work (and the companion paper, Part II) presents new experimental data for the combustion of n-C3-C6 alcohols (n-propanol, n-butanol, n-pentanol, n-hexanol) and a lumped kinetic model to describe their pyrolysis and oxidation. The kinetic subsets for alcohol pyrolysis and oxidation from the CRECK kinetic model have been systematically updated to describe the pyrolysis and high- and low-temperature oxidation of this series of fuels. Using the reaction class approach, the reference kinetic parameters have been determined based on experimental, theoretical, and kinetic modeling studies previously reported in the literature, providing a consistent set of rate rules that allow easy extension and good predictive capability. The modeling approach is based on the assumption of an alkane-like and alcohol-specific moiety for the alcohol fuel molecules. A thorough review and discussion of the information available in the literature supports the selection of the kinetic parameters that are then applied to the n-C3-C6 alcohol series and extended for further proof to describe n-octanol oxidation. Because of space limitations, the large amount of information, and the comprehensive character of this study, the manuscript has been divided into two parts. Part I describes the kinetic model as well as the lumping techniques and provides a synoptic synthesis of its wide range validation made possible also by newly obtained experimental data. These include speciation measurements performed in a jet-stirred reactor (p = 107 kPa, T = 550-1100 K, φ = 0.5, 1.0, 2.0) for n-butanol, n-pentanol, and n-hexanol and ignition delay times of ethanol, n-propanol, n-butanol, n-pentanol/air mixtures measured in a rapid compression machine at φ = 1.0, p = 10 and 30 bar, and T = 704-935 K. These data are presented and discussed in detail in Part II, together with detailed comparisons with model predictions and a deep kinetic discussion. This work provides new experimental targets that are useful for kinetic model development and validation (Part II), as well as an extensively validated kinetic model (Part I), which also contains subsets of other reference components for real fuels, thus allowing the assessment of combustion properties of new sustainable fuels and fuel mixtures.

Electronic structure-based rate rules for ipso addition-elimination reactions on mono-aromatic hydrocarbons with single and double OH/CH3/OCH3/CHO/C2H5 substituents: a systematic theoretical investigation

The recent interest in bio-oils combustion and the key role of mono-aromatic hydrocarbons (MAHs) in existing kinetic frameworks, both in terms of poly-aromatic hydrocarbons growth and surrogate fuels formulation, motivates the current systematic theoretical investigation of one of the relevant reaction classes in MAHs pyrolysis and oxidation: ipso substitution by hydrogen. State-of-the-art theoretical methods and protocols implemented in automatized computational routines allowed to investigate 14 different potential energy surfaces involving MAHs with hydroxy and methyl single (phenol and toluene) and double (o-,m-,p-C6H4(OH)2, o-,m-,p-CH3C6H4OH, and o-,m-,p-C6H4(CH3)2) substituents, providing rate constants for direct implementation in existing kinetic models. The accuracy of the adopted theoretical method was validated by comparison of the computed rate constants with the available literature data. Systematic trends in energy barriers, pre-exponential factors, and temperature dependence of the Arrhenius parameters were found, encouraging the formulation of rate rules for ipso substitutions on MAHs. The rules here proposed allow to extrapolate from a reference system the necessary activation energy and pre-exponential factor corrections for a large number of reactions from a limited set of electronic structure calculations. We were able to estimate rate constants for other 63 ipso addition-elimination reactions on di-substituted MAHs, reporting in total 75 rate constants for ipso substitution reactions o-,m-,p-R'C6H4R + → C6H5R + ', with R,R' = OH/CH3/OCH3/CHO/C2H5, in the 300-2000 K range. Additional calculations performed for validation showed that the proposed rate rules are in excellent agreement with the rate constants calculated using the full computational protocol in the 500-2000 K range, generally with errors below 20%, increasing up to 40% in a few cases. The main results of this work are the successful application of automatized electronic structure calculations for the derivation of accurate rate constants for ipso substitution reactions on MAHs, and an efficient and innovative approach for rate rules formulation for this reaction class.