A single quantum dot-based nanosensor with multilayer of multiple acceptors for ultrasensitive detection of human alkyladenine DNA glycosylase

Distance-based paper device coupled with uracil-rich DNA hydrogel for visual quantification of Uracil-DNA glycosylase

Uracil-DNA glycosylase (UDG), an enzyme for repairing uracil-containing DNA damage, is crucial for maintaining genomic stability. Simple and fast quantification of UDG activity is essential for biological assay and clinical diagnosis, since its aberrant level is associated with DNA damage and various diseases. Herein, we developed a fully integrated "sample in-signal out" distance-based paper analytical device (dPAD) for visual quantification of UDG using a flow-controlled uracil-rich DNA hydrogel (URDH). The uracil base sites contained in the DNA hydrogel are mis-incorporated with dUTP by rolling circle amplification (RCA), which simplifies the preparation process of the functionalized hydrogel. In the presence of UDG, the uracil in URDH can be recognized and removed to induce the permeability change of URDH, resulting in the visible distance signal along the paper channel. Using dPAD, as low as 6.4 × 10-4 U/mL of UDG (within 80 min) is visually identified without any instruments and complicated operations. This integrated dPAD is advantageous for its simplicity, cost effectiveness, and ease of use. We envision that it has the great potential for point-of-care testing (POCT) in DNA damage testing, personalized healthcare assessment, and biomedical applications.

"Two in one": A novel DNA cascade amplification strategy for trace detection of dual targets

According to the characteristics of DNA programming, the cascaded nucleic acid amplification technology with larger output can overcome the problem of insufficient sensitivity of single nucleic acid amplification technology, and it combines the advantages of two or even multiple nucleic acid amplification technologies at the same time. In this work, a novel cascade signal amplification strategy with strand displacement amplification (SDA) and cascade hybridization chain reaction (HCR) was proposed for trace detection of hAAG and VEGF165. HAAG-induced SDA produced a large amount of S2 to open H2 on Polystyrene (PS) nanospheres, thereby triggering cascade HCR to form DNA dendritic nanostructures with rich fluorescence (FL) signal probes (565 nm). It could realize the amplification of FL signals for the detection of hAAG. Moreover, many doxorubicin (Dox) were loaded into the GC bases of DNA dendritic nanostructures, and its FL signal was effectively shielded. VEGF165 specifically bound to its aptamer to form G-quadruplex structures, which released Dox to produce a high FL signal (590 nm) for detection of VEGF165. This work developed a unique multifunctional DNA dendritic nanostructure fluorescence probe, and cleverly designed a new "On-off" switch strategy for sensitive trace detection of cancer markers.

Construction of single-molecule counting-based biosensors for DNA-modifying enzymes: A review

DNA-modifying enzymes act as critical regulators in a wide range of genetic functions (e.g., DNA damage & repair, DNA replication), and their aberrant expression may interfere with regular genetic functions and induce various malignant diseases including cancers. DNA-modifying enzymes have emerged as the potential biomarkers in early diagnosis of diseases and new therapeutic targets in genomic research. Consequently, the development of highly specific and sensitive biosensors for the detection of DNA-modifying enzymes is of great importance for basic biomedical research, disease diagnosis, and drug discovery. Single-molecule fluorescence detection has been widely implemented in the field of molecular diagnosis due to its simplicity, high sensitivity, visualization capability, and low sample consumption. In this paper, we summarize the recent advances in single-molecule counting-based biosensors for DNA-modifying enzyme (i.e, alkaline phosphatase, DNA methyltransferase, DNA glycosylase, flap endonuclease 1, and telomerase) assays in the past four years (2019 - 2023). We highlight the principles and applications of these biosensors, and give new insight into the future challenges and perspectives in the development of single-molecule counting-based biosensors.

Deep Learning Promotes Profiling of Multiple miRNAs in Single Extracellular Vesicles for Cancer Diagnosis

Extracellular vesicle microRNAs (EV miRNAs) are critical noninvasive biomarkers for early cancer diagnosis. However, accurate cancer diagnosis based on bulk analysis is hindered by the heterogeneity among EVs. Herein, we report an approach for profiling single-EV multi-miRNA signatures by combining total internal reflection fluorescence (TIRF) imaging with a deep learning (DL) algorithm for the first time. This innovative technique allows for the precise characterization of EV miRNAs at the single-vesicle level, overcoming the challenges posed by EV heterogeneity. TIRF with high resolution and a signal-to-noise ratio can simultaneously detect multi-miRNAs in situ in individual EVs. DL algorithm avoids complicated and inaccurate artificial feature extraction, achieving automated high-resolution image analysis. Using this approach, we reveal that the main variation of EVs from 5 cancer cells and normal plasma is the triple-positive EV subpopulation, and the classification accuracy of single triple-positive EVs from 6 sources can reach above 95%. In the clinical cohort, 20 patients (5 lung cancer, 5 breast cancer, 5 cervical cancer, and 5 colon cancer) and 5 healthy controls are predicted with an overall accuracy of 100%. This single-EV strategy provides new opportunities for exploring more specific EV biomarkers to achieve cancer diagnosis and classification.

Development of a N6-methyladenosine-directed single quantum dot-based biosensor for sensitive detection of METTL3/14 complex activity in breast cancer tissues

The METTL3/14 complex is an important RNA N6-Methyladenosine (m6A) methyltransferase in organisms, and the abnormal METTL3/14 complex activity is associated with the pathogenesis and various cancers. Sensitive detection of METTL3/14 complex is essential to tumor pathogenesis study, cancer diagnosis, and anti-cancer drug discovery. However, traditional methods for METTL3/14 complex assay suffer from poor specificity, costly antibodies, unstable RNA substrates, and low sensitivity. Herein, we construct a single quantum dot (QD)-based förster resonance energy transfer (FRET) biosensor for sensitive detection of METTL3/14 complex activity. In the presence of METTL3/14 complex, it catalyzes the methylation of adenine in the substrate probe, leading to the formation of m6A that protects the substrate probes from MazF-mediated cleavage. The hybridization of methylated DNA substrate with biotinylated capture probe initiates polymerization reaction to obtain a biotinylated double-stranded DNA (dsDNA) with the incorporation of numerous Cy5 fluorophores. Subsequently, the Cy5-incorporated dsDNA can self-assembly onto the 605QD surface to form the 605QD-dsDNA-Cy5 nanostructure, causing FRET between 605QD donor and Cy5 acceptor. This biosensor has excellent sensitivity with a limit of detection (LOD) of 3.11 × 10-17 M, and it can measure the METTL3/14 complex activity in a single cell. Moreover, this biosensor can be used to evaluate the METTL3/14 complex kinetic parameters and screen potential inhibitors. Furthermore, it can differentiate the METTL3/14 complex expression in healthy human tissues and breast cancer patient tissues, providing a powerful tool for cancer pathogenesis study, clinical diagnosis, prognosis monitoring, and drug discovery.

Construction of a Dendritic Nanoassembly-Based Fluorescent Biosensor for Electrostatic Interaction-Independent and Label-Free Measurement of Human Poly(ADP-ribose) Polymerase 1 in Lung Tissues

Poly(ADP-ribose) polymerase 1 (PARP-1) is responsible for catalyzing the creation of poly(ADP-ribose) polymer and involved in DNA replication and repair. Sensitive measurement of PARP-1 is critical for clinical diagnosis. However, the conventional electrostatic attraction-based PAPR-1 assays usually involve laborious procedures, poor sensitivity, and false positives. Herein, we demonstrate the construction of a dendritic nanoassembly-based fluorescent biosensor for electrostatic interaction-independent and label-free measurement of human PARP-1 in lung tumor tissues. When PARP-1 is present, the specific double-stranded DNA (dsDNA)-activated PARP-1 transfers the ADP-ribosyl group from nicotinamide adenine dinucleotide (NAD+)/biotinylated NAD+ to the PARP-1 itself, resulting in the formation of biotinylated dsDNA-PARP-1-PAR polymer bioconjugates that can be captured by magnetic beads. Upon the addition of TdT, APE1, and NH2-modified T-rich probe, the captured dsDNAs with dual 3'-OH termini initiate TdT-activated APE1-mediated hyperbranched amplification to produce abundant dendritic DNA nanoassemblies that can be stained by SYBR Green I to generate a high fluorescence signal. This biosensor is characterized by a template-free, electrostatic interaction-independent, high sensitivity, and label-free assay. It enables rapid (less than 3 h) measurement of PARP-1 with a limit of detection of 4.37 × 10-8 U/μL and accurate measurement of cellular PARP-1 activity with single-cell sensitivity. Moreover, it is capable of screening potential inhibitors and discriminating the PARP-1 level in normal person tissues and lung cancer patient tissues, with great potential in PARP-1-related clinical diagnosis and drug discovery.

Generation of 3'-OH terminal-triggered encoding of multicolor fluorescence for simultaneous detection of different DNA glycosylases

Uracil DNA glycosylase (UDG) and human alkyladenine DNA glycosylase (hAAG) are the important DNA glycosylases for initiating the repair of DNA damage, and the aberrant expression of DNA glycosylases is closely associated with various diseases, such as Parkinson's disease, several cancers, and human immunodeficiency. The simultaneous detection of UDG and hAAG is helpful for the study of early clinical diagnosis. However, the reported methods for multiple DNA glycosylase assay suffer from the application of an expensive single-molecule instrument, labor-tedious magnetic separation, and complicated design. Herein, we develop a simple fluorescence method with only three necessary DNA strands for the selective and sensitive detection of multiple DNA glycosylase activity based on the generation of 3'-OH terminal-triggered encoding of multicolor fluorescence. The method can achieve the detection limits of 5.5 × 10^-5 U/mL for UDG and 3.3 × 10^-3 U/mL for hAAG, which are lower than those of the reported fluorescence methods. Moreover, it can be further used to detect multiple DNA glycosylases in the human cervical carcinoma cell line (HeLa cells), normal human renal epithelial cells (293 T cells), and biological fluid and measure the enzyme kinetic parameters of UDG and hAAG.

High-efficiency synthesis of red carbon dots using machine learning

Due to their excellent optical properties, red carbon dots (CDs) have been widely used in cell imaging and biomedical therapy. However, the efficiency of red CD synthesis is deficient, and the synthesis cost is high. Here, we propose an efficient synthesis method based on machine learning to assist researchers in synthesizing red fluorescent CDs. This strategy can quickly and efficiently predict the predesigned conditions of CD synthesis. It avoids invalid synthetic experiments and improves the efficiency of red CD synthesis.

Development of quantum dot-phthalocyanine integrated G-quadruplex /double-stranded DNA biosensor

In the present study, the phthalocyanine (Pc) integrated mercaptopropionic acid capped quantum dot (mpa@QD) biosensor has been developed for the quantitative determination of G-quadruplex and double-stranded DNA. The working principle of the developed biosensor platform is based on the quenching of the emission signal of the mpa@QD in the presence of Pc (closed position) and the recovery of the fluorescence signal in the presence of DNA (open position). The parameters affecting biosensor performance, such as Pc type and concentration, were optimized. Since the developed biosensor aimed to determine G-quadruplex and double-stranded DNA in biological samples, the effect of common ions (such as Na⁺, Mg²⁺) and serum albumin found in many biological matrices on the biosensor performance were examined. The effect of common ions on biosensor signal was negligible, except Zn²⁺. The analytical properties of the biosensor, such as linear range, calibration sensitivity, relative standard deviation %, the limit of detection, and quantification, were determined. The limit of detection and quantification values were found 0.055 μM and 0.18 μM for AS1411, 0.061 μM and 0.20 μM for Tel21, 0.038 μM and 0.13 μM for Tel45 and 0.091 μM and 0.30 μM for ctDNA. Several different synthetic samples were prepared. The spiked synthetic samples such as mammalian cell medium were used to evaluate the analytical performance of Pc-mpa@QD. All synthetic samples were prepared with polyethylene glycol, which resembles biological samples' crowded environment.

Construction of an APE1-Mediated Cascade Signal Amplification Platform for Homogeneously Sensitive and Rapid Measurement of DNA Methyltransferase in Escherichia coli Cells

DNA methylation is an essential genomic epigenetic behavior in both eukaryotes and prokaryotes. Deregulation of DNA methyltransferase (Dam MTase) can change the DNA methylation level and cause various diseases. Herein, we develop an apurinic/apyrimidinic endonuclease 1 (APE1)-mediated cascade signal amplification platform for homogeneously sensitive and rapid measurement of Dam MTase in Escherichia coli cells. This assay involves a partial double-stranded DNA (dsDNA) substrate and two hairpin signal probes (HP1 and HP2) that are modified with Cy5 and BHQ2 at two ends, respectively. When Dam MTase is present, it methylates the dsDNA substrate, and subsequently, endonuclease DpnI cleaves the methylated substrate, yielding trigger probe 1. Hybridization of trigger probe 1 with HP1 forms a partial dsDNA containing an apurinic/apyrimidinic (AP) site, which is cleaved by APE1 to induce the cyclic cleavage of HP1 and the production of abundant trigger probe 2. Subsequent hybridization of trigger probe 2 with HP2 forms a partial dsDNA with an AP site, inducing the cyclic cleavage of HP2 by APE1. Consequently, cyclic cleavage of HP1 and HP2 induces the generation of abundant Cy5 molecules, which are easily measured by single-molecule imaging. This assay can be performed homogeneously and rapidly within 2 h, which is the shortest among the reported amplification-based assays. Moreover, it exhibits good selectivity and high sensitivity, and it can discriminate Dam MTase from other enzymes and screen inhibitors. Importantly, it can accurately measure the Dam MTase activity in serum and E. coli cells, with promising applications in clinical diagnosis and drug discovery.

Monitoring Clinical-Pathological Grading of Hepatocellular Carcinoma Using MicroRNA-Guided Semiconducting Polymer Dots

MicroRNAs (miRNAs) are a class of small, noncoding RNAs involved in nearly all genetic central dogma processes and human biological behavior, which also play a significant role in the pathological activity of tumors, such as gene transcription, protein translation, and exosome secretion. Therefore, through the navigation of certain specific miRNAs, we can trace the specific physiological processes or image some specific tissues. Designing and accurately positioning microRNA (miRNA)-sensitive fluorescent nanoprobes with benign specificity and recognition in cells or tissues are a challenging research field. To solve the difficulties, we introduce four semiconducting polymer dots (Pdots) as nanoprobes linked by specific miRNA antisense sequences for monitoring the pathological grading by the variation in miRNA expression. Based on the base pairing principle, these miRNA-sensitive Pdots could bind to specific miRNAs within the cancerous cells. As impacted by the background of different pathology gradings, the proportions of the four hepatocellular carcinoma (HCC)-specific miRNAs within the cancerous cell are different, and the pathological grading of the patient tissues can be determined by comparing the palette combinations. The short single-stranded RNA-functionalized Pdots, which have excellent microRNA sensitivity, are observed in an experimental cell model and a series of tissue specimens from HCC patients for the first time. Using the Förster (or fluorescence) resonance energy transfer (FRET) model of Pdots and Cy3dt tag to simulate in vivo miRNA detection, the superior sensitivity and specificity of these nanoprobes are verified. The interference of subjective factors in traditional single/bis-dye emission intensity detection is abandoned, and multiple label staining is used to enhance sensitivity further and reduce the false-positive rate. The feasibility exhibited by this novel staining method is verified in normal hepatocellular HCC cell lines and 16 frozen ultrathin tissue sections, which are employed to quantify pathological grading-related color presentation systems for clinical doctors and pathologists' use. The intelligently designed miRNA-guided Pdots will emerge as an ideal platform with promising biological imaging.

Catalytic hairpin assembled polymeric tetrahedral DNA frameworks for MicroRNA imaging in live cells

Dynamic DNA nanodevices-based assembly is currently well developed for a broad range of analytical applications. However, some problems persist, such as false positives, nuclease digestions, and exclusive interferences with single signal in complex cellular environment. Herein, we have established a method for imaging cellular miR-155, where it induced assembly of two tetrahedral DNA frameworks (TDFs), TDF-1 and TDF-2, both of which had four fluorescence modified hairpins (Cy3 for TDF-1 and Cy5 for TDF-2, respectively) at each angle, into polymeric tetrahedral DNA frameworks (PTDFs). The formation of PTDFs was greatly dependent on miR-155 overexpressed in breast cancer cells since miR-155 drove catalytic hairpin assembly (CHA) reaction by opening the hairpins at the vertices of TDF-1 to hybridize with TDF-2. Upon the completion of hybridization, the miR-155 was released, starting the next cycle of the CHA reaction. Measurements of atomic force microscopy (AFM) and Förster resonance energy transfer (FRET) showed that the formation of PTDFs occurred owing to the multivalent assembly of TDF-1 and TDF-2. By utilizing the formation of PTDFs, miR-155 was detected in a linear range from 0.5 nM to 30 nM with a 0.35 nM limit of determination, enabling the successful imaging of endogenous miR-155 in live cells through the FRET signal from Cy3 to Cy5. These studies demonstrated that this method significantly strengthened the resistance nuclease to digestion and stable ability with exclusive interference.

Recent advances in biosensor for DNA glycosylase activity detection

Base excision repair (BER) is vital for maintaining the integrity of the genome under oxidative damage. DNA glycosylase initiates the BER pathway recognizes and excises the mismatched substrate base leading to the apurinic/apyrimidinic site generation, and simultaneously breaks the single-strand DNA. As the aberrant activity of DNA glycosylase is associated with numerous diseases, including cancer, immunodeficiency, and atherosclerosis, the detection of DNA glycosylase is significant from bench to bedside. In this review, we summarized novel DNA strategies in the past five years for DNA glycosylase activity detection, which are classified into fluorescence, colorimetric, electrochemical strategies, etc. We also highlight the current limitations and look into the future of DNA glycosylase activity monitoring.

Nucleic acid amplification-integrated single-molecule fluorescence imaging for in vitro and in vivo biosensing

Single-molecule fluorescence imaging is among the most advanced analytical technologies and has been widely adopted for biosensing due to its distinct advantages of simplicity, rapidity, high sensitivity, low sample consumption, and visualization capability. Recently, a variety of nucleic acid amplification approaches have been developed to provide a straightforward and highly efficient way for amplifying low abundance target signals. The integration of single-molecule fluorescence imaging with nucleic acid amplification has greatly facilitated the construction of various fluorescent biosensors for in vitro and in vivo detection of DNAs, RNAs, enzymes, and live cells with high sensitivity and good selectivity. Herein, we review the advances in the development of fluorescent biosensors by integrating single-molecule fluorescence imaging with nucleic acid amplification based on enzyme (e.g., DNA polymerase, RNA polymerase, exonuclease, and endonuclease)-assisted and enzyme-free (e.g., catalytic hairpin assembly, entropy-driven DNA amplification, ligation chain reaction, and hybridization chain reaction) strategies, and summarize the principles, features, and in vitro and in vivo applications of the emerging biosensors. Moreover, we discuss the remaining challenges and future directions in this area. This review may inspire the development of new signal-amplified single-molecule biosensors and promote their practical applications in fundamental and clinical research.

Development of a single quantum dot-mediated FRET biosensor for amplification-free detection of ten-eleven translocation 2

Ten-eleven translocation (TET) family proteins play key roles in multiple cellular processes by mediating the oxidation of 5-methylcytosine to directly participate in DNA demethylation, and often aberrantly expressed in various diseases. In this research, we develop a single-quantum-dot (QD)-mediated fluorescence resonance energy transfer (FRET) biosensor for amplification-free measurement of ten-eleven translocation 2 (TET2). When TET2 is present, it catalyzes the oxidation of 5-vinylcytosine in dsDNA to 5-formylmethylcytosine, and the subsequent labeling of dsDNA with Cy5 generates a biotinylated Cy5-dsDNA complex. Biotinylated Cy5-dsDNA complexes are conjugated to the streptavidin-coated 605QDs to obtain a Cy5-dsDNA-605QD nanostructures, inducing FRET from 605QD to Cy5. FRET signal can be simply measured by single-molecule counting. This biosensor enables homogeneous detection of TET2 with a limit of detection (LOD) of 0.042 ng/μL, and it can accurately measure cellular TET2 down to 1 cell. Moreover, this biosensor can be used to screen TET2 inhibitors, offering a new platform for TET2-related medical research and clinical diagnostics.

Integration of exonuclease III-powered three-dimensional DNA walker with single-molecule detection for multiple initiator caspases assay

Initiator caspases are important components of cellular apoptotic signaling and they can activate effector caspases in extrinsic and intrinsic apoptotic pathways. The simultaneous detection of multiple initiator caspases is essential for apoptosis mechanism studies and disease therapy. Herein, we develop a sensitive nanosensor based on the integration of exonuclease III (Exo III)-powered three-dimensional (3D) DNA walker with single-molecule detection for the simultaneous measurement of initiator caspase-8 and caspase-9. This assay involves two peptide-DNA detection probe-conjugated magnetic beads and two signal probe-conjugated gold nanoparticles (signal probes@AuNPs). The presence of caspase-8 and caspase-9 can induce the cleavage of peptides in two peptide-DNA detection probes, releasing two trigger DNAs from the magnetic beads, respectively. The two trigger DNAs can serve as the walker DNA to walk on the surface of the signal probes@AuNPs powered by Exo III digestion, liberating numerous Cy5 and Texas Red fluorophores which can be quantified by single-molecule detection, with Cy5 indicating caspase-8 and Texas Red indicating caspase-9. Notably, the introduction of the AuNP-based 3D DNA walker greatly reduces the background signal and amplifies the output signals, and the introduction of single-molecule detection further improves the detection sensitivity. This nanosensor is very sensitive with a detection limit of 2.08 × 10-6 U μL-1 for caspase-8 and 1.71 × 10-6 U μL-1 for caspase-9, and it can be used for the simultaneous screening of caspase inhibitors and the measurement of endogenous caspase activity in various cell lines at the single-cell level. Moreover, this nanosensor can be extended to detect various proteases by simply changing the peptide sequences of the detection probes.

Spatiotemporally Controlled DNA Nanoclamps: Single-Molecule Imaging of Receptor Protein Oligomerization

Cell membrane surface receptor proteins play an important role in cellular biological processes. There are numerous methods to detect receptors, yet developing an artificially controlled and specific detection and treatment strategy remains a challenge. Herein, we develop such a strategy based on upconversion nanoparticles (UCNPs) loaded DNA probes that enable two-color ratiometric imaging excitated by a 980 nm laser. The light response controllable signal opening strategy avoids waste during probe transportation and improves sensitivity. Thereby the number of receptors on individual DU145 cell membranes is counted by single-molecule detection. Due to the different expression of specific receptor proteins, the number of single fluorescent dots counted can be used as a basis for distinguishing DU145 from other cells. This work is highly controllable to increase sensitivity, providing a platform for cancer diagnosis and treatment.

Multicolor fluorescence encoding of different microRNAs in lung cancer tissues at the single-molecule level

The simultaneous detection of multiple microRNAs (miRNAs) will facilitate early clinical diagnosis. Herein, we demonstrate the integration of multicolor fluorophore-encoded cascade signal amplification with single-molecule detection for simultaneous measurement of different miRNAs in lung cancer tissues. This assay involves two linear templates and two circular templates without the requirement of any fluorescent-labeled probes. The binding of target miRNAs to their corresponding linear templates initiates the cyclic strand displacement amplification, generating many triggers which can specifically hybridize with the corresponding biotin-labeled AP probes to initiate the apurinic/apyrimidic endonuclease 1-assisted cyclic cleavage reaction for the production of more biotin-labeled primers for each miRNA. The resultant two primers can react with their corresponding circular templates to initiate rolling circle amplification which enables the incorporation of Cy5-dCTP/Cy3-dGTP nucleotides, resulting in the simultaneous production of abundant biotin-/multiple Cy5/Cy3-labeled DNA products. After magnetic separation and exonuclease cleavage, the amplified products release abundant Cy5 and Cy3 fluorescent molecules which can be simply monitored by single-molecule detection, with Cy3 indicating miR-21 and Cy5 indicating miR-155. This assay involves three consecutive amplification reactions, enabling the conversion of extremely low abundant target miRNAs into large numbers of Cy5/Cy3 fluorophore-encoded DNA products which can release abundant fluorescent molecules for the generation of amplified signals. This assay exhibits high sensitivity, good selectivity, and the capability of multiplexed assay. This method can simultaneously quantify miR-155 and miR-21 in living cells and in lung cancer tissues, and it can distinguish the expression of miRNAs between non-small cell lung cancer patients and healthy persons. The accuracy and reliability of the proposed method are further validated by quantitative reverse transcription polymerase chain reaction.

A copper-free and enzyme-free click chemistry-mediated single quantum dot nanosensor for accurate detection of microRNAs in cancer cells and tissues

MicroRNAs (miRNAs) play key roles in the post-transcriptional regulation of genes, and their aberrant expression may disturb the normal gene regulation network to induce various diseases, and thus accurate detection of miRNAs is essential to early clinical diagnosis. Herein, we develop for the first time a single-quantum dot (QD)-based Förster resonance energy transfer (FRET) nanosensor to accurately detect miRNAs based on copper-free and enzyme-free cycling click chemistry-mediated tricyclic ligase chain reaction (LCR) amplification. We design four DNA probes namely DNA probes 1-4, with DNA probes 1 and 3 being modified with azide (N3) and DNA probes 2 and 4 being modified with dibenzocyclooctyne (DBCO). When target miRNA is present, DNA probes 1 and 2 can proceed via copper-free and enzyme-free click chemistry to generate the probes 1-2 ligation product. Subsequently, DNA probes 3 and 4 can hybridize with the probes 1-2 ligation product to generate the probes 3-4 ligation product. Both the probes 1-2 ligation product and probes 3-4 ligation product can act as the templates to initiate cycling click chemistry-mediated tricyclic LCR amplification whose products can be easily measured by the single-QD-based FRET nanosensor. This assay does not involve any enzymatic reverse transcription, copper catalyst, and ligase enzyme, and it exhibits excellent selectivity, high sensitivity, and the capability of differentiating even single-base mismatches. Moreover, this nanosensor can accurately quantify miRNA-155 even at the single-cell level, and it can distinguish the miRNA-155 expression in tissues of healthy persons and nonsmall cell lung cancer (NSCLC) patients.

No-nonspecific recognition-based amplification strategy for endonuclease activity screening with dual-color DNA nano-clew

The inevitable nonspecific recognition severely restricted widely used nucleic acid amplification strategies, which has become an urgent problem in current scientific research. Herein, we developed a novel no-nonspecific recognition-based amplification strategy to construct dual-color dye loaded nano-clew as ultrabright illuminant for screening endonuclease activity with Escherichia coliRY13 I (EcoR I) as a model, which overcame some major drawbacks such as nonspecific recognition and photobleaching. Typically, the target endonuclease induces cleavage of the customized dumbbell-shape substrate (DSS) to generate two same triggers that can initiate the rolling circle amplification (RCA) to prepare long single-strand DNA (lssDNA), which could self-assemble into irregular DNA nano-clew based on the electrostatic interactions with Mg²⁺ to furtherly capture the donor and accepter fluorophore proximately, constructing the dye loaded nano-clew with dual-color fluorescence (FL) emission to resist photobleaching. Importantly, in absence of EcoR I, even if the DSS could combine with circular template a little, the reaction system performed hardly RCA reaction due to no cohesive terminus, resulting an extremely low background fluorescence signal because of the prevention of nonspecific RCA reaction. As expected, the proposed sensing platform with a low limit of detection (LOD) of 3.4 × 10^-7 U/μL was demonstrated to work well for endonuclease inhibitors screening also. Furthermore, the proposed no-nonspecific recognition strategy could be readily extended to various DNA or RNA enzymes such as DNA methyltransferase, DNA repair-related enzymes and polynucleotide kinase just by simply changing the recognition sequence in the DNA substrate, performing great potential of endonucleases-related clinical diagnosis and drugs discovery.

A highly sensitive method for simultaneous detection of hAAG and UDG activity based on multifunctional dsDNA probes mediated exponential rolling circle amplification

DNA glycosylase is an indispensable DNA damage repair enzyme which can recognize and excise the damaged bases in the DNA base excision-repair pathway. The dysregulation of DNA glycosylase activity will give rise to the dysfunction of base excision-repair and lead to abnormalities and diseases. The simultaneous detection of multiple DNA glycosylases can help to fully understand the normal physiological functions of cells, and determine whether the cells are abnormal in pre-disease. Regrettably, the synchronous detection of functionally similar DNA glycosylases is a great challenge. Herein, we developed a multifunctional dsDNA probe mediated exponential rolling circle amplification (E-RCA) method for the simultaneously sensitive detection of human alkyladenine DNA glycosylase (hAAG) and uracil-DNA glycosylase (UDG). The multifunctional dsDNA probe contains the hypoxanthine sites and the uracil sites which can be recognized by hAAG and UDG respectively to generate apyrimidinic (AP) sites in the dsDNA probe. Then the AP sites will be recognized and cut by endonuclease Ⅳ (Endo IV) to release corresponding single-stranded primer probes. Subsequently, two padlock DNA templates are added to initiate E-RCA to generate multitudinous G-quadruplexes and/or double-stranded dumbbell lock structures, which can combine N-methyl mesoporphyrin IX (NMM) and SYBR Green Ⅰ (SGI) for the generation of respective fluorescent signals. The detection limits are obtained as low as 0.0002 U mL^-1 and 0.00001 U mL^-1 for hAAG and UDG, respectively. Notably, this method can realize the simultaneous detection of two DNA glycosylases without the use of specially labeled probes. Finally, this method is successfully applied to detect hAAG and UDG activities in the lysates of HeLa cells and Endo1617 cells at single-cell level, and to detect the inhibitors of DNA glycosylases.

Multi-stage responsive peptide nanosensor: Anchoring EMT and mitochondria with enhanced fluorescence and boosting tumor apoptosis

Epithelial-mesenchymal transition (EMT) is closely related to tumor metastasis and invasion. Thereinto, mesenchymal tumor mitochondria are the critical target for tumor inhibition. Therefore, real-time in vivo monitoring of EMT as well as inhibiting mesenchymal tumor mitochondria is of great diagnosis and therapy significance. Herein, we construct a multi-stage recognition and morphological transformable self-assembly-peptide nano biosensor ^NDRP which can response the EMT marker and specifically damage the mesenchymal tumor cell in vivo. This nano-molar-affinity sensor is designed and screened with sensitive peptides containing a molecular switching which could be specifically triggered by the receptor to achieve the vesicle-to-fibril transformation in living system with enhanced fluorescent signal. ^NDRP nanosensor could target the tumor lesion in circulatory system, recognize mesenchymal tumor marker DDR2 (Discoidin domain receptor 2) in cellular level and specifically achieve mitochondria in subcellular level as well as damaged mitochondria which could be applied as a in vivo theranostic platform.

Advances in single-molecule fluorescent nanosensors

Single-molecule detection represents the ultimate sensitivity in measurement science with the characteristics of simplicity, rapidity, low sample consumption, and high signal-to-noise ratio and has attracted considerable attentions in biosensor development. In recent years, a variety of functional nanomaterials with unique chemical, optical, mechanical, and electronic features have been synthesized. The integration of single-molecule detection with functional nanomaterials enables the construction of novel single-molecule fluorescent nanosensors with excellent performance. Herein, we review the advance in single-molecule fluorescent nanosensors constructed by novel nanomaterials including quantum dots, gold nanoparticles, upconversion nanoparticles, fluorescent conjugated polymer nanoparticles, nanosheets, and magnetic nanoparticles in the past decade (2011-2020), and discuss the strategies, features, and applications of single-molecule fluorescent nanosensors in the detection of microRNAs, DNAs, enzymes, proteins, viruses, and live cells. Moreover, we highlight the future direction and challenges in this area. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > In Vitro Nanoparticle-Based Sensing Diagnostic Tools > Diagnostic Nanodevices.

A single quantum dot-based fluorescence resonance energy transfer biosensor for antibody-free detection of ten-eleven translocation 1

We developed a single quantum dot-based fluorescence resonance energy transfer biosensor for antibody-free detection of ten-eleven translocation 1 (TET1). This biosensor can sensitively detect TET1 in a homogeneous manner without the involvement of any specific antibodies, and it can be used for accurate measurement of TET1 activity in human neuroblastoma cells and the screening of TET1 inhibitors.

Deacetylation-activated construction of single quantum dot-based nanosensor for sirtuin 1 assay

Sirtuin 1 (SIRT1) is an important histone deacetylase that regulates biological functions ranging from DNA repair to metabolism. The alteration of SIRT1 is associated with a variety of diseases including diabetes, inflammation, aging-related diseases, and cancers. Consequently, the detection of SIRT1 activity is of great therapeutic importance. Herein, we demonstrate for the first time the deacetylation-activated construction of single quantum dot (QD)-based nanosensor for sensitive SIRT1 assay. This nanosensor is composed of a Cy5-labeled peptide substrate and a streptavidin-coated QD. The peptide with one lysine acetyl group acts as both the Cy5 fluorophore carrier and the substrate for sensing SIRT1. In the presence of SIRT1, it removes the acetyl group in the acetylated peptide, and the resultant deacetylated peptide can react with the NHS-activated biotin reagent (sulfo-NHS-biotin) to form the biotinylated peptide. The multiple biotinylated peptides can assemble on single QD surface via biotin-streptavidin interaction, inducing efficient fluorescence resonance energy transfer (FRET) from the QD to Cy5, generating distinct Cy5 signal which can be simply quantified by total internal reflection fluorescence-based single-molecule detection. This single QD-based nanosensor can sensitively detect SIRT1 with a detection limit of as low as 3.91 pM, and it can be applied for the measurement of enzyme kinetic parameters and the screening of SIRT1 inhibitors. Moreover, this nanosensor can be used to detect the SIRT1 activity in cancer cells, providing a powerful platform for epigenetic research and SIRT1-targeted drug discovery.

High-Efficiency FRET Processes in BODIPY-Functionalized Quantum Dot Architectures

Efficient FRET systems are developed combining colloidal CdSe quantum dots (QDs) donors and BODIPY acceptors. To promote effective energy transfer in FRET architectures, the distance between the organic fluorophore and the QDs needs to be optimized by a careful system engineering. In this context, BODIPY dyes bearing amino-terminated functionalities are used in virtue of the high affinity of amine groups in coordinating the QD surface. A preliminary QD surface treatment with a short amine ligand is performed to favor the interaction with the organic fluorophores in solution. The successful coordination of the dye to the QD surface, accomplishing a short donor-acceptor distance, provides effective energy transfer already in solution, with efficiency of 76 %. The efficiency further increases in the solid state where the QDs and the dye are deposited as single coordinated units from solution, with a distance between the fluorophores down to 2.2 nm, demonstrating the effectiveness of the coupling strategy.

Cytosine-5 methylation-directed construction of a Au nanoparticle-based nanosensor for simultaneous detection of multiple DNA methyltransferases at the single-molecule level

DNA methylation at cytosine/guanine dinucleotide islands (CpGIs) is the most prominent epigenetic modification in prokaryotic and eukaryotic genomes. DNA methyltransferases (MTases) are responsible for genomic methylation, and their aberrant activities are closely associated with various diseases including cancers. However, the specific and sensitive detection of multiple DNA MTases has remained a great challenge due to the specificity of the methylase substrate and the rareness of methylation-sensitive restriction endonuclease species. Here, we demonstrate for the first time the cytosine-5 methylation-directed construction of a Au nanoparticle (AuNP)-based nanosensor for simultaneous detection of multiple DNA MTases at the single-molecule level. We used the methyl-directed endonuclease GlaI to cleave the site-specific 5-methylcytosine (5-mC). In the presence of CpG and GpC MTases (i.e., M.SssI and M.CviPI), their hairpin substrates are methylated at cytosine-5 to form the catalytic substrates for GlaI, respectively, followed by simultaneous cleavage by GlaI to yield two capture probes. These two capture probes can hybridize with the Cy5/Cy3-signal probes which are assembled on the AuNPs, respectively, to form the double-stranded DNAs (dsDNAs). Each dsDNA with a guanine ribonucleotide can act as the catalytic substrate for ribonuclease (RNase HII), inducing recycling cleavage of signal probes to liberate large numbers of Cy5 and Cy3 molecules from the AuNPs. The released Cy5 and Cy3 molecules can be simply quantified by total internal reflection fluorescence (TIRF)-based single-molecule imaging for simultaneous measurement of M.SssI and M.CviPI MTase activities. This method exhibits good specificity and high sensitivity with a detection limit of 2.01 × 10-3 U mL-1 for M.SssI MTase and 3.39 × 10-3 U mL-1 for M.CviPI MTase, and it can be further applied for discriminating different kinds of DNA MTases, screening potential inhibitors, and measuring DNA MTase activities in human serum and cell lysate samples, holding great potential in biomedical research, clinical diagnosis, drug discovery and cancer therapeutics.

Rolling circle amplification-driven encoding of different fluorescent molecules for simultaneous detection of multiple DNA repair enzymes at the single-molecule level

DNA repair enzymes (e.g., DNA glycosylases) play a critical role in the repair of DNA lesions, and their aberrant levels are associated with various diseases. Herein, we develop a sensitive method for simultaneous detection of multiple DNA repair enzymes based on the integration of single-molecule detection with rolling circle amplification (RCA)-driven encoding of different fluorescent molecules. We use human alkyladenine DNA glycosylase (hAAG) and uracil DNA glycosylase (UDG) as the target analytes. We design a bifunctional double-stranded DNA (dsDNA) substrate with a hypoxanthine base (I) in one strand for hAAG recognition and an uracil (U) base in the other strand for UDG recognition, whose cleavage by APE1 generates two corresponding primers. The resultant two primers can hybridize with their respective circular templates to initiate RCA, resulting in the incorporation of multiple Cy3-dCTP and Cy5-dGTP nucleotides into the amplified products. After magnetic separation and exonuclease cleavage, the Cy3 and Cy5 fluorescent molecules in the amplified products are released into the solution and subsequently quantified by total internal reflection fluorescence (TIRF)-based single-molecule detection, with Cy3 indicating the presence of hAAG and Cy5 indicating the presence of UDG. This strategy greatly increases the number of fluorescent molecules per concatemer through the introduction of RCA-driven encoding of different fluorescent molecules, without the requirement of any specially labeled detection probes for simultaneous detection. Due to the high amplification efficiency of RCA and the high signal-to-ratio of single-molecule detection, this method can achieve a detection limit of 6.10 × 10-9 U mL-1 for hAAG and 1.54 × 10-9 U mL-1 for UDG. It can be further applied for simultaneous detection of multiple DNA glycosylases in cancer cells at the single-cell level and the screening of DNA glycosylase inhibitors, holding great potential in early clinical diagnosis and drug discovery.

Single-Particle Assay of Poly(ADP-ribose) Polymerase-1 Activity with Dark-Field Optical Microscopy

Poly(ADP-ribose) polymerase-1 (PARP-1), over expression in vast majority of cancer cells, is a potential biomarker for clinical diagnosis. However, very limited detection methods have been developed so far, especially for in situ intracellular imaging. Here, we developed a spectral-resolved single-particle detection method for detection of PARP-1 in vitro and in situ intracellular imaging with dark-field microscopy (DFM). A gold nanoparticle (50 nm) modified with active DNA duplex (Au₅₀-dsDNA) was used as a scattering probe. Under the function of active dsDNA, PARP-1 catalyzed to synthesize the hyperbranched poly (ADP-ribose) polymer (PAR) by using nicotinamideadenine dinucleotide as substrates, forming Au₅₀-dsDNA@PAR. Then, negatively charged PAR adsorbed positively charged AuNPs (8 nm) to form Au₅₀-dsDNA@PAR@Au₈. As a result, a notable red shift occurred in localized surface plasmon resonance scattering spectra of Au₅₀, accompanying with obvious color change. Thus, PARP-1 has been detected with a linear range from 0.2 to 10 mU based on the scattering spectra change. The detection limit was 2 orders of magnitude lower than previously reported methods. Probes showed distinct different colors in cancer cells and normal cells, realizing in situ imaging of intracellular PARP-1 at a single-particle level. Compared with previously reported fluorescence imaging methods, the proposed strategy avoided sophisticated label procedures, which has great potential to be used for clinical diagnosis and PARP-1 inhibitor research.

Versatile Sensing Platform for Cd2+ Detection in Rice Samples and Its Applications in Logic Gate Computation

A versatile sensing platform was designed for Cd²⁺ detection utilizing Mg²⁺-dependent DNAzyme as the biocatalyst and toehold-mediated strand replacement as the reaction mechanism. The Cd²⁺-aptamer interaction brings the split subunits of the Mg²⁺-dependent DNAzyme into close-enough proximity, which generates an active DNAzyme that can catalyze the cleavage reaction toward the hairpin substrate strand (H1). The trigger DNA fragment in H1 can open another hairpin probe (H2) to activate the cyclic signal amplification process. The generated numerous G-quadruplex DNAzyme structures will produce a high fluorescence response after incubation with the fluorescence dye N-methyl mesoporphyrin IX (NMM). This detection platform is ultrasensitive and the detection limit (LOD) is 2.5 pM (S/N = 3). The sensing system is robust and can work effectively even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples with good reliability. Showing the unique features of simple operation, label-free and enzyme-free format, high sensitivity and selectivity, and universal signal amplification mode, our proposed sensing protocol holds great promise for becoming a competitive alternative for the routine monitoring of Cd²⁺ pollution. Importantly, this flexible and versatile sensing platform was used to construct some exquisite logic gates, including AND, OR, INHIBIT, IMPLICATION, NOR, and NAND.

Quantification of cyclic DNA polymerization with lanthanide coordination nanomaterials for liquid biopsy

Quantification of circulating tumor DNA (ctDNA) is of great importance in liquid biopsy but difficult due to its low amount in bodily fluids. To meet this high demand, a novel method for ctDNA detection is established by quantifying cyclic DNA polymerization using lanthanide coordination polymers (Ln-CPs). Relying on the coordination between the pyrophosphate ion (PPi) and trivalent cerium ion (Ce3+), organic ligand-free PPi-Ce coordination polymer networks (PPi-Ce CPNs) with enhanced fluorescence are prepared for the first time. By surveying the optical properties of PPi-Ce CPNs, it is found that PPi regulates electric-dipole transition of Ce3+ to the lowest excited state, thus facilitating the emission of fluorescence. Therefore, fluorescence enhancement of PPi-Ce CPNs originates from the ligand field effect rather than the normal antenna effect. Moreover, a new strategy to quantify DNA polymerization is developed based on PPi-Ce CPNs. By introducing multifold cyclic DNA polymerization, a small amount of ctDNA triggers the exponential generation of PPi to form plenty of PPi-Ce CPNs. Accordingly, a biosensor is constructed for sensitive ctDNA detection by measuring the intense fluorescence of PPi-Ce CPNs. The biosensor is capable of sensing ctDNA at the sub-femtomolar level, which is far better than the analytical performances of commercial dyes. Besides, the analytical method is able to detect single nucleotide polymorphism and determine ctDNA in real samples. Considering that DNA polymerization is widely used in bio-recognition, bio-assembly and biomineralization, the work provides a versatile quantitative strategy of making relevant processes precise and controllable.

Target-activated transcription for the amplified sensing of protease biomarkers

Signal amplification is an effective way to achieve sensitive analysis of biomarkers, exhibiting great promise in biomedical research and clinical diagnosis. Inspired by the transcription process, here we present a versatile strategy that enables effective amplification of proteolysis into nucleic acid signal outputs in a homogeneous system. In this strategy, a protease-activatable T7 RNA polymerase is engineered as the signal amplifier and achieves 3 orders of magnitude amplification in signal gain. The versatility of this strategy has been demonstrated by the development of sensitive and selective assays for protease biomarkers, such as matrix metalloproteinase-2 (MMP-2) and thrombin, with sub-picomole sensitivity, which is 4.3 × 103-fold lower than that of the standard peptide-based method. Moreover, the proposed assay has been further applied in the detection of MMP-2 secreted by cancer cells, as well as in the assessment of MMP-2 levels in osteosarcoma tissue samples, providing a general approach for the monitoring of protease biomarkers in clinical diagnosis.

Construction of a self-directed replication system for label-free and real-time sensing of repair glycosylases with zero background

Genomic DNA damage and repair are involved in multiple fundamental biological processes, including metabolism, disease, and aging. Inspired by the natural repair mechanism in vivo, we demonstrate for the first time the construction of a self-directed replication system for label-free and real-time sensing of repair glycosylases with zero background. The presence of DNA glycosylase can catalyze the excision repair of the damaged base, successively autostarting the self-directed replication through recycling polymerization extension and strand-displacement DNA synthesis for the generation of exponentially amplified dsDNAs. The resultant dsDNA products can be label-free and real-time monitored with SYBR Green I as the fluorescent indicator. Owing to the high efficiency of self-directed exponential replication and the absolute zero background resulting from the efficient inhibition of nonspecific amplification induced by multiple primer-dependent amplification, this strategy exhibits high sensitivity with a detection limit of 1 × 10-8 U μL-1 in vitro and 1 cell in vivo, and it can be further used to screen inhibitors, quantify DNA glycosylase from diverse cancer cells, and even monitor various repair enzymes by simply changing the specific damaged base in the DNA template. Importantly, this assay can be performed in a label-free, real-time and isothermal manner with the involvement of only a single type of polymerase, providing a simple, robust and universal platform for repair enzyme-related biomedical research and clinical therapeutics.

A multifunctional DNA nanostructure based on multicolor FRET for nuclease activity assay

We develop a four-color fluorescent probe for ratiometric detection of multiple nucleases based on multistep fluorescence resonance energy transfer.