Influence of the distal guanidine group on the rate and selectivity of O2 reduction by iron porphyrin

Iron Porphyrin-Based Composites for Electrocatalytic Oxygen Reduction Reactions

The oxygen reduction reaction (ORR) is one of the most critical reactions in energy conversion systems, and it facilitates the efficient conversion of chemical energy into electrical energy, which is necessary for modern technology. Developing efficient and cost-effective catalysts for ORRs is crucial for advancing and effectively applying renewable energy technologies such as fuel cells, metal-air batteries, and electrochemical sensors. In recent years, iron porphyrin-based composites have emerged as ideal catalysts for facilitating effective ORRs due to their unique structural characteristics, abundance, advances in synthesis, and excellent catalytic properties, which mimic natural enzymatic systems. However, many articles have focused on reviewing porphyrin-based frameworks or metalloporphyrins in general, necessitating research specifically addressing iron porphyrin. This review discusses iron porphyrin as an effective catalyst in ORRs. It provides a comprehensive knowledge of the application of iron porphyrin-based composites for electrocatalytic ORRs, focusing on their properties, synthesis, structural integration with conductive supports, catalytic mechanism, and efficacy. This review also discusses the challenges of applying iron porphyrin-based composites and provides recommendations to address these challenges.

Catalytic reduction of oxygen to water by non-heme iron complexes: exploring the effect of the secondary coordination sphere proton exchanging site

In this study, we prepared non-heme FeIII complexes (1, 2, and 3) of an N4 donor set of ligands (H2L, Me2L, and BPh2L). 1 is supported by a monoanionic bispyridine-dioxime ligand (HL). In 2 and 3, the primary coordination sphere of Fe remained similar to that in 1, except that the oxime protons of the ligand were replaced with two methyl groups and a bridging -BPh2 moiety, respectively. X-ray structures of the FeII complexes (1a and 3a) revealed similar Fe-N distances; however, they were slightly elongated in 2a. The FeIII/FeII potential of 1, 2, and 3 appeared at -0.31 V, -0.25 V, and 0.07 V vs. Fc+/Fc, respectively, implying that HL and Me2L have comparable donor properties. However, BPh2L is more electron deficient than HL or Me2L. 1 showed electrocatalytic oxygen reduction reaction (ORR) activity in acetonitrile in the presence of trifluoroacetic acid (TFAH) as the proton source at Ecat/2 = -0.45 V and revealed selective 4e-/4H+ reduction of O2 to H2O. 1 showed an effective overpotential (ηeff) of 0.98 V and turnover frequency (TOFmax) of 1.02 × 103 s-1. Kinetic studies revealed a kcat of 2.7 × 107 M-2 s-1. Strikingly, 2 and 3 remained inactive for electrocatalytic ORR, which established the essential role of the oxime scaffolds in the electrocatalytic ORR of 1. Furthermore, a chemical ORR of 1 has been investigated using decamethylferrocene as the electron source. For 1, a similar rate equation was noted to that of the electrocatalytic pathway. A kcat of 6.07 × 104 M-2 s-1 was found chemically. Complex 2, however, underwent a very slow chemical ORR. Complex 3 chemically enhances the 4e-/4H+ reduction of O2 and exhibits a TOF of 0.24 s-1 and a kcat value of 2.47 × 102 M-1 s-1. Based on the experimental observations, we demonstrate that the oxime backbone of the ligand in 1 works as a proton exchanging site in the 4e-/4H+ reduction of O2. The study describes how the ORR is affected by the tuning of the ligand scaffold in a family of non-heme Fe complexes.

Further Understanding the Roles of Solvent, Brønsted Acids, and Hydrogen Bonding in Iron Porphyrin-Mediated Carbon Dioxide Reduction

Improving our understanding of how molecules and materials mediate the electrochemical reduction of carbon dioxide (CO2) to upgraded products is of great interest as a means to address climate change. A leading class of molecules that can facilitate the electrochemical conversion of CO2 to carbon monoxide (CO) is iron porphyrins. These molecules can have high rate constants for CO2-to-CO conversion; they are robust, and they rely on abundant and inexpensive synthetic building blocks. Important foundational work has been conducted using chloroiron 5,10,15,20-tetraphenylporphyrin (FeTPPCl) in N,N-dimethylformamide (DMF) solvent. A related and recent report points out that the corresponding perchlorate complex, FeTPPClO4, can have superior function due to its solubility in other organic solvents. However, the importance of hydrogen bonding and solvent effects was not discussed. Herein, we present a detailed kinetic study of the triflate (CF3SO3-) complex of FeTPP in DMF and in MeCN using a range of phenol Brønsted acid additives. We also detected the formation of Fe(III)TPP-phenolate complexes using cyclic voltammetry experiments. Importantly, our new analysis of apparent rate constants with different added phenols allows for a modification to the established mechanistic model for CO2-to-CO conversion. Critically, our improved model accounts for hydrogen bonding and solvent effects by using simple hydrogen bond acidity and basicity descriptors. We use this augmented model to rationalize function in other reported porphyrin systems and to make predictions about operational conditions that can enhance the CO2 reduction chemistry.

Effects of tuning the structural symmetry of cobalt porphyrin on electrocatalytic oxygen reduction reactions

Metalloporphyrins have attracted significant attention as highly promising alternatives to Pt-based electrocatalysts in the realm of oxygen reduction reactions (ORRs). While the structure of porphyrin is widely recognized as a pivotal factor influencing the ORR performance, the impact of molecular symmetry, which is one of the key properties of the molecular structure, has rarely been understood and its effects remain largely unexplored. Herein, we designed and synthesized two triphenylamine (TPA)-substituted cobalt porphyrins, the asymmetric aBz-TCoP and the symmetric Bz-2TCoP, which are doped onto carbon black to construct composite catalysts for ORRs. The electronic structures of both porphyrins are determined through density functional theory (DFT) calculations, and the morphology and electronic states of the composites are examined by spectroscopic techniques. A series of electrochemical measurements demonstrate the superior activity, selectivity and durability of Bz-2TCoP/C to aBz-TCoP/C in ORRs conducted in both acidic and alkaline electrolytes. The improved ORR properties of the symmetric porphyrin may stem from the steric properties rather than the electronic properties of the chemical structure. This work represents a preliminary study on the effects of porphyrin structural symmetry on electrocatalysis and provides a potential strategy for further structural modifications of metalloporphyrins, as non-noble metal electrocatalysts, to enhance the ORR performance.

Amine Groups in the Second Sphere of Iron Porphyrins Allow for Higher and Selective 4e-/4H+ Oxygen Reduction Rates at Lower Overpotentials

Iron porphyrins with one or four tertiary amine groups in their second sphere are used to investigate the electrochemical O₂ reduction reaction (ORR) in organic (homogeneous) and aqueous (heterogeneous) conditions. Both of these complexes show selective 4e^-/4H⁺ reduction of oxygen to water at rates that are 2-3 orders of magnitude higher than those of iron tetraphenylporphyrin lacking these amines in the second sphere. In organic solvents, these amines get protonated, which leads to the lowering of overpotentials, and the rate of the ORR is enhanced almost 75,000 times relative to rates expected from the established scaling relationship for the ORR by iron porphyrins. In the aqueous medium, the same trend of higher ORR rates at a lower overpotential is observed. In situ resonance Raman data under heterogeneous aqueous conditions show that the presence of one amine group in the second sphere leads to a cleavage of the O-O bond in a Fe^III-OOH intermediate as the rate-determining step (rds). The presence of four such amine groups enhances the rate of O-O bond cleavage such that this intermediate is no longer observed during the ORR; rather, the proton-coupled reduction of the Fe^III-O₂^- intermediate with a H/D isotope effect of 10.6 is the rds. These data clearly demonstrate changes in the rds of the electrochemical ORR depending on the nature of second-sphere residues and explain their deviation from linear scaling relationships.

Silver nanostructure-modified graphite electrode for in-operando SERRS investigation of iron porphyrins during high-potential electrocatalysis

In-operando spectroscopic observation of the intermediates formed during various electrocatalytic oxidation and reduction reactions is crucial to propose the mechanism of the corresponding reaction. Surface-enhanced resonance Raman spectroscopy coupled to rotating disk electrochemistry (SERRS-RDE), developed about a decade ago, proved to be an excellent spectroscopic tool to investigate the mechanism of heterogeneous oxygen reduction reaction (ORR) catalyzed by synthetic iron porphyrin complexes under steady-state conditions in water. The information about the formation of the intermediates accumulated during the course of the reaction at the electrode interface helped to develop better ORR catalysts with second sphere residues in the porphyrin rings. To date, the application of this SERRS-RDE setup is limited to ORR only because the thiol self-assembled monolayer (SAM)-modified Ag electrode, used as the working electrode in these experiments, suffers from stability issues at more cathodic and anodic potential, where H₂O oxidation, CO₂ reduction, and H⁺ reduction reactions occur. The current investigation shows the development of a second-generation SERRS-RDE setup consisting of an Ag nanostructure (AgNS)-modified graphite electrode as the working electrode. These electrodes show higher stability (compared to the conventional thiol SAM-modified Ag electrode) upon exposure to very high cathodic and anodic potential with a good signal-to-noise ratio in the Raman spectra. The behavior of this modified electrode toward ORR is found to be the same as the SAM-modified Ag electrode, and the same ORR intermediates are observed during electrochemical ORR. At higher cathodic potential, the signatures of Fe(0) porphyrin, an important intermediate in H⁺ and CO₂ reduction reactions, was observed at the electrode-water interface.

Crucial Roles of a Pendant Imidazole Ligand of a Cobalt Porphyrin Complex in the Stoichiometric and Catalytic Reduction of Dioxygen

A cobalt porphyrin complex with a pendant imidazole base ([(L₁ )Co^II ]) is an efficient catalyst for the homogeneous catalytic two-electron reduction of dioxygen by 1,1'-dimethylferrocene (Me₂ Fc) in the presence of triflic acid (HOTf), as compared with a cobalt porphyrin complex without a pendant imidazole base ([(L₂ )Co^II ]). The pendant imidazole ligand plays a crucial role not only to provide an imidazolinium proton for proton-coupled electron transfer (PCET) from [(L₁ )Co^II ] to O₂ in the presence of HOTf but also to facilitate electron transfer (ET) from [(L₁ )Co^II ] to O₂ in the absence of HOTf. The kinetics analysis and the detection of intermediates in the stoichiometric and catalytic reduction of O₂ have provided clues to clarify the crucial roles of the pendant imidazole ligand of [(L₁ )Co^II ] for the first time.

Second-Sphere Hydrogen-Bond Donors and Acceptors Affect the Rate and Selectivity of Electrochemical Oxygen Reduction by Iron Porphyrins Differently

The factors that control the rate and selectivity of 4e^-/4H⁺ O₂ reduction are important for efficient energy transformation as well as for understanding the terminal step of respiration in aerobic organisms. Inspired by the design of naturally occurring enzymes which are efficient catalysts for O₂ and H₂O₂ reduction, several artificial systems have been generated where different second-sphere residues have been installed to enhance the rate and efficiency of the 4e^-/4H⁺ O₂ reduction. These include hydrogen-bonding residues like amines, carboxylates, ethers, amides, phenols, etc. In some cases, improvements in the catalysis were recorded, whereas in some cases improvements were marginal or nonexistent. In this work, we use an iron porphyrin complex with pendant 1,10-phenanthroline residues which show a pH-dependent variation of the rate of the electrochemical O₂ reduction reaction (ORR) over 2 orders of magnitude. In-situ surface-enhanced resonance Raman spectroscopy reveals the presence of different intermediates at different pH's reflecting different rate-determining steps at different pH's. These data in conjunction with density functional theory calculations reveal that when the distal 1,10-phenanthroline is neutral it acts as a hydrogen-bond acceptor which stabilizes H₂O (product) binding to the active Fe^II state and retards the reaction. However, when the 1,10-phenanthroline is protonated, it acts as a hydrogen-bond donor which enhances O₂ reduction by stabilizing Fe^III-O₂^.- and Fe^III-OOH intermediates and activating the O-O bond for cleavage. On the basis of these data, general guidelines for controlling the different possible rate-determining steps in the complex multistep 4e^-/4H⁺ ORR are developed and a bioinspired principle-based design of an efficient electrochemical ORR is presented.

Controlled Modification of Axial Coordination for Transition-Metal Single-Atom Electrocatalyst

Single-atom catalysts (SACs) have emerged as a new frontier in areas such as electrocatalysis, photocatalysis, and enzymatic catalysis. Aided by recent advances in the synthetic methodologies of nanomaterials, atomic characterization technologies, and theoretical calculation modeling, various SACs have been prepared for a variety of catalytic reactions. To meet the requirements of SACs with distinctive performance and appreciable selectivity, much research has been carried out to adjust the coordination configuration and electronic properties of SACs. This concept summarizes the latest advances in the experimental and computational efforts aimed at tuning the axial coordination of SACs. Series of atoms, functional groups or even macrocycles are oriented into the atomic metal center, and how this affects the electrocatalytic performance is also reviewed. Finally, this concept presents perspectives for the further precise design, preparation and in-situ detection of axially coordinated SACs.

Recent developments in the synthesis of bio-inspired iron porphyrins for small molecule activation

Nature utilizes a diverse set of tetrapyrrole-based macrocycles (referred to as porphyrinoids) for catalyzing various biological processes. Investigation of the differences in electronic structure and reactivity in these reactions have revealed striking differences that lead to diverse reactivity from, apparently, similar looking active sites. Therefore, the role of the different heme cofactors as well as the distal superstructure in the proteins is important to understand. This article summarizes the role of a few synthetic metallo-porphyrinoids towards catalyzing several small molecule activation reactions, such as the ORR, NiRR, CO₂RR, etc. The major focus of the article is to enlighten the synthetic routes to the well-decorated active-site mimic in a tailor-made fashion pursuing a retrosynthetic approach, learning from the biosynthesis of the cofactors. Techniques and the role of the second-sphere residues on the reaction rate, selectivity, etc. are incorporated emulating the basic amino acid residues fencing the active sites. These bioinspired mimics play an important role towards understanding the role of the prosthetic groups as well as the basic residues towards any reaction occurring in Nature.

Bioinorganic Chemistry on Electrodes: Methods to Functional Modeling

One of the major goals of bioinorganic chemistry has been to mimic the function of elegant metalloenzymes. Such functional modeling has been difficult to attain in solution, in particular, for reactions that require multiple protons and multiple electrons (nH⁺/ne^-). Using a combination of heterogeneous electrochemistry, electrode and molecule design one may control both electron transfer (ET) and proton transfer (PT) of these nH⁺/ne^- reactions. Such control can allow functional modeling of hydrogenases (H⁺ + e^- → 1/2 H₂), cytochrome c oxidase (O₂ + 4 e^- + 4 H⁺ → 2 H₂O), monooxygenases (RR'CH₂ + O₂ + 2 e^- + 2 H⁺ → RR'CHOH + H₂O) and dioxygenases (S + O₂ → SO₂; S = organic substrate) in aqueous medium and at room temperatures. In addition, these heterogeneous constructs allow probing unnatural bioinspired reactions and estimation of the inner- and outer-sphere reorganization energy of small molecules and proteins.

Second Sphere Effects on Oxygen Reduction and Peroxide Activation by Mononuclear Iron Porphyrins and Related Systems

Activation and reduction of O₂ and H₂O₂ by synthetic and biosynthetic iron porphyrin models have proved to be a versatile platform for evaluating second-sphere effects deemed important in naturally occurring heme active sites. Advances in synthetic techniques have made it possible to install different functional groups around the porphyrin ligand, recreating artificial analogues of the proximal and distal sites encountered in the heme proteins. Using judicious choices of these substituents, several of the elegant second-sphere effects that are proposed to be important in the reactivity of key heme proteins have been evaluated under controlled environments, adding fundamental insight into the roles played by these weak interactions in nature. This review presents a detailed description of these efforts and how these have not only demystified these second-sphere effects but also how the knowledge obtained resulted in functional mimics of these heme enzymes.

Controlling Oxygen Reduction Selectivity through Steric Effects: Electrocatalytic Two-Electron and Four-Electron Oxygen Reduction with Cobalt Porphyrin Atropisomers

Achieving a selective 2 e^- or 4 e^- oxygen reduction reaction (ORR) is critical but challenging. Herein, we report controlling ORR selectivity of Co porphyrins by tuning only steric effects. We designed Co porphyrin 1 with meso-phenyls each bearing a bulky ortho-amido group. Due to the resulted steric hinderance, 1 has four atropisomers with similar electronic structures but dissimilar steric effects. Isomers αβαβ and αααα catalyze ORR with n=2.10 and 3.75 (n is the electron number transferred per O₂ ), respectively, but ααββ and αααβ show poor selectivity with n=2.89-3.10. Isomer αβαβ catalyzes 2 e^- ORR by preventing a bimolecular O₂ activation path, while αααα improves 4 e^- ORR selectivity by improving O₂ binding at its pocket, a feature confirmed by spectroscopy methods, including O K-edge near-edge X-ray absorption fine structure. This work represents an unparalleled example to improve 2 e^- and 4 e^- ORR by tuning only steric effects without changing molecular and electronic structures.

Design Strategies of Non-Noble Metal-Based Electrocatalysts for Two-Electron Oxygen Reduction to Hydrogen Peroxide

Hydrogen peroxide (H₂ O₂ ) is a highly value-added and environmentally friendly chemical with various applications. The production of H₂ O₂ by electrocatalytic 2e^- oxygen reduction reaction (ORR) has drawn considerable research attention, with a view to replacing the currently established anthraquinone process. Electrocatalysts with low cost, high activity, high selectivity, and superior stability are in high demand to realize precise control over electrochemical H₂ O₂ synthesis by 2e^- ORR and the feasible commercialization of this system. This Review introduces a comprehensive overview of non-noble metal-based catalysts for electrochemical oxygen reduction to afford H₂ O₂ , providing an insight into catalyst design and corresponding reaction mechanisms. It starts with an in-depth discussion on the origins of 2e^- /4e^- selectivity towards ORR for catalysts. Recent advances in design strategies for non-noble metal-based catalysts, including carbon nanomaterials and transition metal-based materials, for electrochemical oxygen reduction to H₂ O₂ are then discussed, with an emphasis on the effects of electronic structure, nanostructure, and surface properties on catalytic performance. Finally, future challenges and opportunities are proposed for the further development of H₂ O₂ electrogeneration through 2e^- ORR, from the standpoints of mechanistic studies and practical application.

Recent Developments in Metalloporphyrin Electrocatalysts for Reduction of Small Molecules: Strategies for Managing Electron and Proton Transfer Reactions

Porphyrins are archetypal ligands in inorganic chemistry. The last 10 years have seen important new advances in the use of metalloporphyrins as catalysts in the activation and reduction of small molecules, in particular O₂ and CO₂ . Recent developments of new molecular designs, scaling relationships, and theoretical modeling of mechanisms have rapidly advanced the utility of porphyrins as electrocatalysts. This Minireview focuses on the summary and evaluation of recent developments of metalloporphyrin O₂ and CO₂ reduction electrocatalysts, with an emphasis on contrasting homogeneous and heterogeneous electrocatalysis. Comparisons for proposed reaction mechanisms are provided for both CO₂ and O₂ reduction, and ideas are proposed about how lessons from the last decade of research can lead to the development of practical, applied porphyrin-derived catalysts.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

Elucidation of Factors That Govern the 2e-/2H+ vs 4e-/4H+ Selectivity of Water Oxidation by a Cobalt Corrole

Considering the importance of water splitting as the best solution for clean and renewable energy, the worldwide efforts for development of increasingly active molecular water oxidation catalysts must be accompanied by studies that focus on elucidating the mode of actions and catalytic pathways. One crucial challenge remains the elucidation of the factors that determine the selectivity of water oxidation by the desired 4e^-/4H⁺ pathway that leads to O₂ rather than by 2e^-/2H⁺ to H₂O₂. We now show that water oxidation with the cobalt-corrole CoBr₈ as electrocatalyst affords H₂O₂ as the main product in homogeneous solutions, while heterogeneous water oxidation by the same catalyst leads exclusively to oxygen. Experimental and computation-based investigations of the species formed during the process uncover the formation of a Co(III)-superoxide intermediate and its preceding high-valent Co-oxyl complex. The competition between the base-catalyzed hydrolysis of Co(III)-hydroperoxide [Co(III)-OOH]^- to release H₂O₂ and the electrochemical oxidation of the same to release O₂ via [Co(III)-O₂^•]^- is identified as the key step determining the selectivity of water oxidation.

A Single Iron Porphyrin Shows pH Dependent Switch between "Push" and "Pull" Effects in Electrochemical Oxygen Reduction

The "push-pull" effects associated with heme enzymes manifest themselves through highly evolved distal amino acid environments and axial ligands to the heme. These conserved residues enhance their reactivities by orders of magnitude relative to small molecules that mimic the primary coordination. An instance of a mononuclear iron porphyrin with covalently attached pendent phenanthroline groups is reported which exhibit reactivity indicating a pH dependent "push" to "pull" transition in the same molecule. The pendant phenanthroline residues provide proton transfer pathways into the iron site, ensuring selective 4e^-/4H⁺ reduction of O₂ to water. The protonation of these residues at lower pH mimics the pull effect of peroxidases, and a coordination of an axial hydroxide ligand at high pH emulates the push effect of P450 monooxygenases. Both effects enhance the rate of O₂ reduction by orders of magnitude over its value at neutral pH while maintaining exclusive selectivity for 4e^-/4H⁺ oxygen reduction reaction.