Optical monitoring of polymerizations in droplets with high temporal dynamic range

Deciphering the Kinetics of Spontaneous Generation of H2O2 in Individual Water Microdroplets

Spontaneous generation of H2O2 in sub-10 μm-sized water microdroplets has received increasing interest since its first discovery in 2019. On the other hand, due to the short lifetime of these microdroplets (rapid evaporation) and lack of suitable tools to real-time monitor the generation of H2O2 in individual microdroplets, such a seemingly thermodynamically unfavorable process has also raised vigorous debates on the origin of H2O2 and the underlying mechanism. Herein, we prepared water microdroplets with a long lifetime (>1 h) by virtue of microwell confinement and dynamically monitored the spontaneous generation of H2O2 in individual microdroplets via time-lapsed fluorescence imaging. It was unveiled that H2O2 was continuously generated in the as-prepared water microdroplets and an apparent equilibrium concentration of ∼3 μM of H2O2 in the presence of a H2O2-consuming reaction can be obtained. Through engineering the geometry of these microdroplets, we further revealed that the generation rates of H2O2 in individual microdroplets were positively proportional to their surface-to-volume ratios. This also allowed us to extract a maximal H2O2 generation rate of 7.7 nmol m-2 min-1 in the presence of a H2O2-consuming reaction and derive the corresponding probability of spontaneous conversion of interfacial H2O into H2O2 for the first time, that is, ∼1 of 65,000 water molecules in 1 s. These findings delivered strong evidence that the spontaneous generation of H2O2 indeed occurs at the surface of microdroplets and provided us with an important starting point to further enhance the yield of H2O2 in water microdroplets for future applications.

Fluorescence-readout as a powerful macromolecular characterisation tool

The last few decades have witnessed significant progress in synthetic macromolecular chemistry, which can provide access to diverse macromolecules with varying structural complexities, topology and functionalities, bringing us closer to the aim of controlling soft matter material properties with molecular precision. To reach this goal, the development of advanced analytical techniques, allowing for micro-, molecular level and real-time investigation, is essential. Due to their appealing features, including high sensitivity, large contrast, fast and real-time response, as well as non-invasive characteristics, fluorescence-based techniques have emerged as a powerful tool for macromolecular characterisation to provide detailed information and give new and deep insights beyond those offered by commonly applied analytical methods. Herein, we critically examine how fluorescence phenomena, principles and techniques can be effectively exploited to characterise macromolecules and soft matter materials and to further unravel their constitution, by highlighting representative examples of recent advances across major areas of polymer and materials science, ranging from polymer molecular weight and conversion, architecture, conformation to polymer self-assembly to surfaces, gels and 3D printing. Finally, we discuss the opportunities for fluorescence-readout to further advance the development of macromolecules, leading to the design of polymers and soft matter materials with pre-determined and adaptable properties.

Strategies for Overcoming the Single-Molecule Concentration Barrier

Fluorescence-based single-molecule approaches have helped revolutionize our understanding of chemical and biological mechanisms. Unfortunately, these methods are only suitable at low concentrations of fluorescent molecules so that single fluorescent species of interest can be successfully resolved beyond background signal. The application of these techniques has therefore been limited to high-affinity interactions despite most biological and chemical processes occurring at much higher reactant concentrations. Fortunately, recent methodological advances have demonstrated that this concentration barrier can indeed be broken, with techniques reaching concentrations as high as 1 mM. The goal of this Review is to discuss the challenges in performing single-molecule fluorescence techniques at high-concentration, offer applications in both biology and chemistry, and highlight the major milestones that shatter the concentration barrier. We also hope to inspire the widespread use of these techniques so we can begin exploring the new physical phenomena lying beyond this barrier.

Helical Self-Assembly and Fe3+ Detection of V-Shaped AIE-Active Chiral Tetraphenylbutadiene-Based Polyamides

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe3+ selectively with a low detection limit of 3.48 μmol/L.

The Role of Experimental Noise in a Hybrid Classical-Molecular Computer to Solve Combinatorial Optimization Problems

Chemical and molecular-based computers may be promising alternatives to modern silicon-based computers. In particular, hybrid systems, where tasks are split between a chemical medium and traditional silicon components, may provide access and demonstration of chemical advantages such as scalability, low power dissipation, and genuine randomness. This work describes the development of a hybrid classical-molecular computer (HCMC) featuring an electrochemical reaction on top of an array of discrete electrodes with a fluorescent readout. The chemical medium, optical readout, and electrode interface combined with a classical computer generate a feedback loop to solve several canonical optimization problems in computer science such as number partitioning and prime factorization. Importantly, the HCMC makes constructive use of experimental noise in the optical readout, a milestone for molecular systems, to solve these optimization problems, as opposed to in silico random number generation. Specifically, we show calculations stranded in local minima can consistently converge on a global minimum in the presence of experimental noise. Scalability of the hybrid computer is demonstrated by expanding the number of variables from 4 to 7, increasing the number of possible solutions by 1 order of magnitude. This work provides a stepping stone to fully molecular approaches to solving complex computational problems using chemistry.

Active control of equilibrium, near-equilibrium, and far-from-equilibrium colloidal systems

The development of top-down active control over bottom-up colloidal assembly processes has the potential to produce materials, surfaces, and objects with applications in a wide range of fields spanning from computing to materials science to biomedical engineering. In this review, we summarize recent progress in the field using a taxonomy based on how active control is used to guide assembly. We find there are three distinct scenarios: (1) navigating kinetic pathways to reach a desirable equilibrium state, (2) the creation of a desirable metastable, kinetically trapped, or kinetically arrested state, and (3) the creation of a desirable far-from-equilibrium state through continuous energy input. We review seminal works within this framework, provide a summary of important application areas, and present a brief introduction to the fundamental concepts of control theory that are necessary for the soft materials community to understand this literature. In addition, we outline current and potential future applications of actively-controlled colloidal systems, and we highlight important open questions and future directions.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

Polymer Molecular Weight Determination via Fluorescence Lifetime

Control of polymer molecular weight is critical for tailoring structure-function properties; however, traditional molecular weight characterization techniques have limited ability to determine the molecular weight of polymers in real time without sample removal from the reaction mixture, with spatial resolution, and of insoluble polymers. In this work, a fluorescence lifetime imaging microscopy (FLIM) method was developed that overcomes these limitations. The method is demonstrated with polynorbornene and polydicyclopentadiene, polymers derived from ruthenium-catalyzed ring-opening metathesis polymerization (ROMP). The polymer M_w, ranging from 35 to 570 kg/mol as determined by gel-permeation chromatography, was quantitatively correlated with the fluorescence lifetime. The revealed correlation then enabled time-resolved measurement of M_w during an ongoing ROMP reaction, requiring only 1 s per measurement (of a 45 μm × 45 μm polymer sample area), and provided spatial resolution, resulting in simultaneous characterization of polymer morphology. To provide the fluorescence signal, the initial reaction solutions contained a very low doping of a reactive norbornene monomer labeled with fluorescent boron dipyrromethene (BODIPY), such that 1 in every 10⁷ monomers contained a fluorophore. The resulting FLIM visualization method enables the rapid determination of the molecular weights of growing polymers without removal from the reaction mixture and regardless of polymer solubility.

Tuning Single-Polymer Growth via Hydrogen Bonding in Conformational Entanglements

Synthetic polymers have widespread applications in daily life and advanced materials applications. Making polymers efficiently and controllably is highly desired, for which modulating intramolecular and intermolecular interactions have been an effective approach. Recent real-time single-polymer growth studies uncovered nonequilibrium conformational entanglements that form stochastically under living polymerization conditions and which appear to plausibly play key roles in controlling the polymerization kinetics and dispersion. Here, using magnetic tweezers measurements, we study the real-time polymerization dynamics of single polynorbornene-based polymers in which we systematically tune the hydrogen-bonding interactions by titrating the OH content in the monomers and the formed polymers during ring opening metathesis polymerization. Using norbornenes with and without a hydroxyl group and a nonreactive monomer analogue, we show that intrachain and intermolecular hydrogen bonding compete, and both alter the microscopic properties of the nonequilibrium entanglements, leading to surprising multiphasic dependences of polymerization dynamics on the polymer's OH content. We further formulate a simple model to rationalize quantitatively the observed multiphasic behaviors by considering the different scaling relations of intrachain and intermolecular hydrogen bonding on the OH content. These results provide insights into the interconnected roles of intra-/intermolecular interactions, polymer chain conformations, and free monomers in solution in affecting polymerization kinetics and dispersion, and point to new opportunities in manipulating polymerization reactions.

Real-Time Polymer Viscosity-Catalytic Activity Relationships on the Microscale

Polymer growth induces physical changes to catalyst microenvironments. Here, these physical changes are quantified in real time and are found to influence microscale chemical catalysis and the polymerization rate. By developing a method to "peer into" optically transparent living-polymer particles, simultaneous imaging of both viscosity changes and chemical activity was achieved for the first time with high spatiotemporal resolution through a combination of fluorescence intensity microscopy and fluorescence lifetime imaging microscopy techniques. Specifically, an increase in microenvironment viscosity led to a corresponding local decrease in the catalytic molecular ruthenium ring-opening metathesis polymerization rate, plausibly by restricting diffusional access to active catalytic centers. Consistent with this diffusional-access model, these viscosity changes were found to be monomer-dependent, showing larger changes in microenvironment viscosity in cross-linked polydicyclopentadiene compared to non-crosslinked polynorbornene. The sensitivity and high spatial resolution of the imaging technique revealed significant variations in microviscosities between different particles and subparticle regions. These revealed spatial heterogeneities would not be observable through alternative ensemble analytical techniques that provide sample-averaged measurements. The observed spatial heterogeneities provide a physical mechanism for variation in catalytic chemical activity on the microscale that may accumulate and lead to nonhomogeneous polymer properties on the bulk scale.

A microwell array-based approach for studying single nanoparticle catalysis with high turnover frequency

Measuring the catalytical activities of single catalysts in the case of high turnover frequency (TOF, realistic conditions) is highly desirable to accurately evaluate the functional heterogeneities among individuals and to understand the catalytic mechanism. Herein, we report a microwell array-based method to in operando measure the photocatalytic kinetics of single CdS nanoparticles (NPs) with high TOF. This was realized by sealing individual CdS NPs into separated micrometer-sized polydimethylsiloxane wells, thus eliminating the diffusion of products among individuals in the case of high concentration of reactants. This method allowed us to monitor the activities of single catalysts with an average TOF up to 2.1 × 10⁵ s^-1. Interestingly, two types of catalytical behaviors were revealed during single CdS photocatalysis: a rapid decline in activity for most CdS NPs and an initial increase in activity followed by a decrease for a minor population of individuals. The developed method will facilitate the investigation of catalytic activities of single particles under realistic conditions and hold great potential in the fields of photo/electro-catalysts, enzymes, functional bacteria, and so on.

Development of a piperazinyl-NBD-based fluorescent probe and its dual-channel detection for hydrogen sulfide

To selectively detect H₂S based on the thiolysis reaction of 7-nitro-1,2,3-benzoxadiazole (NBD), amines attracted increasing attention since NBD amine is regarded as a new H₂S reaction site. Herein, a novel fluorescent probe, triphenylamine piperazine NBD (TPA-Pz-NBD), was developed. The results showed that it exhibited high selectivity towards H₂S via fluorescence spectroscopy and solution color. Furthermore, TPA-Pz-NBD not only detected H₂S by a dual-channel, turn-on fluorescence signal at 500 nm and turn-off fluorescence signal at 545 nm, respectively, but also displayed a wide detection range of 0-125 μM. In addition, living cell imaging results indicated that TPA-Pz-NBD holds potential for the detection of intracellular H₂S.

Cooperatively assembled liquid crystals enable temperature-controlled Förster resonance energy transfer

Balancing the rigidity of a π-conjugated structure for strong emission and the flexibility of liquid crystals for self-assembly is the key to realizing highly emissive liquid crystals (HELCs). Here we show that (1) integrating organization-induced emission into dual molecular cooperatively-assembled liquid crystals, (2) amplifying mesogens, and (3) elongating the spacer linking the emitter and the mesogen create advanced materials with desired thermal–optical properties. Impressively, assembling the fluorescent acceptor Nile red into its host donor designed according to the aforementioned strategies results in a temperature-controlled Förster resonance energy transfer (FRET) system. Indeed, FRET exhibits strong S-curve dependence as temperature sweeps through the liquid crystal phase transformation. Such thermochromic materials, suitable for dynamic thermo-optical sensing and modulation, are anticipated to unlock new and smart approaches for controlling and directing light in stimuli-responsive devices.

A temperature-sensitive Förster resonance energy transfer system was constructed using a highly emissive liquid crystal co-assembled with Nile red, enabling thermo-optical modulation for controlling and directing light in stimuli-responsive devices.

Visualizing and monitoring interfacial polymerization by aggregation-induced emission

The aggregation-induced emission effect is used to visualize and monitor interfacial polymerization at the alkane–ionic liquid interface by virtue of the quantitative fluorescence of arylamine luminogens.