Azadirachta indica leaf-extract-assisted synthesis of CoO–NiO mixed metal oxide for application in a microbial fuel cell as a cathode catalyst

Watermelon Rind Mediated Biosynthesis of Bimetallic Selenium-Silver Nanoparticles: Characterization, Antimicrobial and Anticancer Activities

One of the most hazardous diseases that influences human health globally is microbial infection. Therefore, bimetallic nanoparticles have received much attention for controlling microbial infections in the current decade. In the present study, bimetallic selenium-silver nanoparticles (Se-Ag NPs) were effectively biosynthesized using watermelon rind WR extract through the green technique for the first time. UV-visible spectroscopy, transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX) methods were used to characterize the produced NPs. The results indicated that the bimetallic Se-Ag NPs had synergistic antimicrobial activity at low concentrations, which helped to reduce the toxicity of Ag NPs after the bimetallic Se-Ag NPs preparation and increase their great potential. Se-Ag NPs with sizes ranging from 18.3 nm to 49.6 nm were detected by TEM. Se-Ag NP surfaces were uniformly visible in the SEM picture. The cytotoxicity of bimetallic Se-Ag NPs was assessed against the Wi38 normal cell line to check their safety, where the IC50 was 168.42 µg/mL. The results showed that bimetallic Se-Ag NPs had antibacterial action against Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Klebsiella oxytoca, Bacillus subtilis, and Staphylococcus aureus with a minimum inhibitory concentration (MIC) of 12.5 to 50 µg/mL. Additionally, bimetallic Se-Ag NPs had promising anticancer activity toward the MCF7 cancerous cell line, where the IC50 was 21.6 µg/mL. In conclusion, bimetallic Se-Ag NPs were biosynthesized for the first time using WR extract, which had strong antibacterial, antifungal and anticancer properties.

Scalable architecture of low-cost household microbial fuel cell for domestic wastewater treatment and simultaneous energy recovery

Researchers are still trying to achieve desirable results while treating actual wastewater at the field size when scaling up a microbial fuel cell (MFC). This pilot-scale project aimed to create a decentralised system for treating domestic wastewater and concurrent energy generation that may be used as a model for the decentralisation process. In this investigation, a cylindrical-shaped earthen membrane was utilized. The arrangement was deployed on-site at a residence for the treatment of domestic wastewater as well as simultaneous generation of power. From August until November 2021, the 36 L pilot-scale setup was operational for a period of 92 days. The setup's performance was affected by seasonal temperature variations during the operation period. The system's performance was measured in terms of COD, nitrate, and NH₃-N removal, with the highest results being 93.52 %, 84.93 %, and 74.78 %, respectively. The pilot-scale setup achieved the highest current of 43.7 mA, and the output voltage of the setup was boosted to 4.1 V using a power management system. The sustainable operation of pilot household MFC showed a positive indication for field application with a low-cost solution.

Engineering the electronic structure of high performance FeCo bimetallic cathode catalysts for microbial fuel cell application in treating wastewater

The development of high-performance, strong-durability and low-cost cathode catalysts toward oxygen reduction reaction (ORR) is of great significance for microbial fuel cells (MFCs). In this study, a series of bimetallic catalysts were synthesized by pyrolyzing a mixture of g-C₃N₄ and Fe, Co-tannic complex with various Fe/Co atomic ratios. The initial Fe/Co atomic ratio (3.5:0.5, 3:1, 2:2, 1:3) could regulate the electronic state, which effectively promoted the intrinsic electrocatalytic ORR activity. The alloy metal particles and metal-N_x sites presented on the catalyst surface. In addition, N-doped carbon interconnected network consisting of graphene-like and bamboo-like carbon nanotube structure derived from g-C₃N₄ provided more accessible active sites. The resultant Fe₃Co₁ catalyst calcined at 700 °C (Fe₃Co₁-700) exhibited high catalytic performance in neutral electrolyte with a half-wave potential of 0.661 V, exceeding that of the commercial Pt/C (0.6 V). As expected, the single chamber microbial fuel cell (SCMFC) with 1 mg/cm² loading of Fe₃Co₁-700 catalyst as the cathode catalyst afforded a maximum power density of 1425 mW/m², which was 10.5% higher than commercial Pt/C catalyst with the same loading (1290 mW/m²) and comparable to the Pt/C catalyst with 2.5 times higher loading ( 1430 mW/m²). Additionally, the Fe₃Co₁-700 also displayed better long-term stability over 1100 h than the Pt/C. This work provides an effective strategy for regulating the surface electronic state in the bimetallic electro-catalyst.

Microbial electrolysis cells for the production of biohydrogen in dark fermentation - A review

To assess biohydrogen for future green energy, this review revisited dark fermentation and microbial electrolysis cells (MECs). Hydrogen evolution rate in mesophilic dark fermentation is as high as 192 m³ H₂/m³-d, however hydrogen yield is limited. MECs are ideal for improving hydrogen yield from carboxylate accumulated from dark fermentation, whereas hydrogen production rate is too slow in MECs. Hence, improving anode kinetic is very important for realizing MEC biohydrogen. Intracellular electron transfer (IET) and extracellular electron transfer (EET) can limit current density in MECs, which is proportional to hydrogen evolution rate. EET does not limit current density once electrically conductive biofilms are formed on anodes, potentially producing 300 A/m². Hence, IET kinetics mainly govern current density in MECs. Among parameters associated with IET kinetic, population of anode-respiring bacteria in anode biofilms, biofilm density of active microorganisms, biofilm thickness, and alkalinity are critical for current density.

Fundamentals and recent progress in bioelectrochemical system-assisted biohythane production

Biohythane, a balanced mixture of 10%-30% v/v of hydrogen and 70%-90% v/v of methane, could be the backbone of an all-purpose future energy supply. Recently, bioelectrochemical systems (BES) became a new sensation among environmental biotechnology processes with the potential to sustainably generate biohythane. Therefore, to unleash its full potential for scaling up, researchers are consistently improving microbial metabolic pathways, novel reactors, and electrode designs. This review presents a detailed analysis of recently discovered fundamental mechanisms and science and engineering intervention of different strategies to improve the biohythane composition and production rate from BES. However, several milestones are to be achieved, for instance, improving electrode kinetics using efficient catalysts, engineered microbial communities, and improved reactor configurations, for commercializing this sustainable technology. Thus, a future perspective section is included to recommend novel research lines, mainly focusing on the microbial communities and the efficient electrocatalysts, to enhance reactor performance.

Accelerating anaerobic digestion process with novel single chamber microbial electrochemical systems with baffle

A newly designed microbial electrochemical system (MES) with the addition of a baffle between the electrodes was integrated with the anaerobic digestion (AD) process for biogas upgradation. Novel MES configuration attained an increased methane production rate of 292.6 mL/L∙d and methane yield of 0.36 ± 0.006 [Formula: see text] /g_COD, which were higher than the values (185.3 mL/L∙d and 0.33 ± 0.009 [Formula: see text] /g_COD) from the MES operation without baffle, respectively. Moreover, the MES with baffle operation resulted in increased substrate removal (88.4 ± 0.5%) and less volatile fatty acids accumulation with a high energy efficiency of 99.6 %. Microbial community analysis revealed that acids metabolizing bacteria, Firmicutes, and Methanothrix were highly enriched in the cathode biofilm of MES with baffle. This study suggests that the baffle addition into the single chamber MES is beneficial to further improve the methanogenesis process for practical applications in the scaled-up MES-AD process.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Synergistically enhanced oxygen reduction reaction and oxytetracycline mineralization by FeCoO/GO modified cathode in microbial fuel cell

The widespread application of antibiotics have aroused serious pollution over the world. Microbial fuel cell (MFC) air cathode was able to simultaneously recover electricity and perform advanced oxidation of pollutions through electro-Fenton (EF). This study synthesized an iron‑cobalt oxide and graphene composite (FeCoO/GO), which possessed high electrochemical activity and ORR catalytic performance. The uniform decoration of FeCoO/GO in MFC air cathode distinctly increased the electricity generation (4.5 times higher than carbon felt) and oxytetracycline (OTC) degradation and detoxification (1.33 times higher). FeCoO/GO boosted the H₂O₂ generation from ORR (1.14 times higher than CF) and mineralization efficiency of OTC (2.63 times higher than CF). UPLC-QTOF-MS verified that OTC was degraded and mineralized through decarboxylation, demethylation, and carbon ring cleavage by the oxidation of ·OH. The enhanced degradation of OTC was not only benefited from the increased ORR catalytic performance, but also the excellent H₂O₂ catalytic activity by Fe and Co for ·OH generation. This study demonstrated an effective strategy by decorating FeCoO/GO in MFC air cathode for the synergistically enhanced ORR and OTC degradation and detoxification, giving promising guidance for the deep removal of antibiotic pollutants in the environment.

Optimum dose of Chaetoceros for controlling methanogenesis to improve power production of microbial fuel cell

The marine algae Chaetoceros contains hexadecatrienoic acid, which suppresses methanogen development and improves the coulombic efficiency (CE) of microbial fuel cells (MFC). To inhibit the methanogens, optimum concentration of marine algae should be added to the anaerobic sludge to enhance the performance of MFC. A varying concentration of Chaetoceros ranging from 1 to 20 mg/mL was carried out for pretreatment of an anaerobic-mix consortium to suppress methanogens. MFC inoculated with pretreated anaerobic sludge with 10 mg/mL Chaetoceros showed a maximum power density of 21.62 W/m³ and a maximum CE of 37.25%, which was considerably higher than the treatment with other concentrations. At 10 mg/mL concentration, Tafel analysis of the anode in the MFC showed a higher exchange current density of 66.35 mA/m² and a lower charge transfer resistance of 0.97 Ω.m², revealing higher bio-electrochemical activity. The performance of MFC improved when the concentration of Chaetoceros was increased up to 10 mg/mL, but then began to decline as the concentration increased further. Thus, the optimum dose of Chaetoceros to be added in the mix-anaerobic consortium to optimize the power performance of MFC was determined, which can be carried out in scaled-up MFCs.

Evaluation of mixed transition metal (Co, Mn, and Cu) oxide electrocatalysts anchored on different carbon supports for robust oxygen reduction reaction in neutral media

Oxygen reduction reaction (ORR) remains a pivotal factor in assessing the overall efficiency of energy conversion and storage technologies. A promising family of ORR electrocatalysts is mixed transition-metal oxides (MTMOs), which have recently gained a growing research interest. In this study, we developed MTMOs with different compositions (designated as A_xB_3−xO₄; A = Cu, B = Co or Mn) anchored on two different carbon supports (activated carbon Vulcan XC-72 (AC) and graphene (G)) for catalyzing ORR in neutral media. Four different MTMO electrocatalysts (i.e., MnO₂–CuO/AC, CoO–CuO/AC, CoO–CuO/G, and MnO₂–CuO/G) were synthesized by a simple and scalable co-precipitation method. We documented the morphology and electrocatalytic properties of MTMO electrocatalysts using transmission and scanning electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectrometer (XPS), energy dispersive X-ray (EDX), and electrochemical techniques. Generally, MTMOs exhibited remarkably high ORR electrocatalytic activity with MTMOs anchored on an activated carbon support outperforming their respective MTMOs anchored on a graphene support, highlighting the importance of the catalyst support in determining the overall ORR activity of electrocatalysts. MnO₂–CuO/AC has the highest diffusion limiting current density (j) value of 4.2 mA cm⁻² at −600 mV (vs. SHE), which is ∼1.1–1.7-fold higher than other tested electrocatalysts (i.e., 3.9, 3.5, and 2.7 mA cm⁻² for CoO–CuO/AC, CoO–CuO/G, and MnO₂–CuO/G, respectively), and slightly lower than Pt/C (5.1 mA cm⁻²) at the same potential value. Moreover, all electrocatalysts exhibited good linearity and parallelism of the Koutechy–Levich (K–L) plots, suggesting that ORR followed first-order reaction kinetics with the number of electrons involved being close to four. Benefiting from their remarkable ORR electrochemical activities and low cost, our results reveal that non-precious MTMOs are efficient enough to replace expensive Pt for broad applications in energy conversion and electrocatalysis in neutral media, such as microbial fuel cells.

Mixed transition metal (Co, Mn, and Cu) oxide electrocatalysts anchored on different carbon supports for oxygen reduction reaction.

B-doped graphene quantum dots implanted into bimetallic organic framework as a highly active and robust cathodic catalyst in the microbial fuel cell

Developing efficient and durable oxygen reduction reaction (ORR) cathodic catalysts plays an essential role in application of microbial fuel cells (MFCs). Herein, the B-doped graphene quantum dots implanted into bimetallic organic framework (BGQDs/MOF-t) are fabricated by a facile electro-deposition. Results show that, the in-situ growth of FeCoMOF on nickel foam can effectively assist construction of nanoflowers with compact connections, thus improves the conductivity. More importantly, this nano-network can serve as the template for the implantation of BGQDs through powerful interface of M-O-C bonding, avoiding π-π rearrangement and providing efficient charge transfer and abundant edge active sites. Benefitting from the enhanced electrode/electrolyte transport interface, abundant catalytic sites and low charge transfer resistance, the BGQDs/MOF-15 exhibits excellent ORR activity, superior to commercial Pt/C catalyst. In the MFC with the BGQDs/MOF-15 cathode, the maximum power density of 703.55 mW m^-2 is achieved, which is 1.53 times of that of the Pt/C cathode. In addition, the BGQDs/MOF-15 cathode maintains great stability over 800 h, while that of Pt/C reduces to 61% of the initial voltage. This work opens new opportunities for developing efficient and durable MOF-derived ORR catalyst.

Critical insights into psychrophilic anaerobic digestion: Novel strategies for improving biogas production

Anaerobic digestion (AD) under psychrophilic temperature has only recently garnered deserved attention. In major parts of Europe, USA, Canada and Australia, climatic conditions are more suited for psychrophilic (<20 ℃) rather than mesophilic (35 - 37 ℃) and thermophilic (55 - 60 ℃) AD. Low temperature has adverse effects on important cellular processes which may render the cell biology inactive. Moreover, cold climate can also alter the physical and chemical properties of wastewater, thereby reducing the availability of substrate to microbes. Hence, the use of low temperature acclimated microbial biomass could overcome thermodynamic constraints and carry out flexible structural and conformational changes to proteins, membrane lipid composition, expression of cold-adapted enzymes through genotypic and phenotypic variations. Reduction in organic loading rate is beneficial to methane production under low temperatures. Moreover, modification in the design of existing reactors and the use of hybrid reactors have already demonstrated improved methane generation in the lab-scale. This review also discusses some novel strategies such as direct interspecies electron transfer (DIET), co-digestion of substrate, bioaugmentation, and bioelectrochemical system assisted AD which present promising prospects. While DIET can facilitate syntrophic electron exchange in diverse microbes, the addition of organic-rich co-substrate can help in maintaining suitable C/N ratio in the anaerobic digester which subsequently can enhance methane generation. Bioaugmentation with psychrophilic strains could reduce start-up time and ensure daily stable performance for wastewater treatment facilities at low temperatures. In addition to the technical discussion, the economic assessment and future outlook on psychrophilic AD are also highlighted.