Concentration dependence of the dynamics of microgel suspensions investigated by dynamic light scattering

Probing the Molecular Mechanism of Viscoelastic Relaxation in Transient Networks

Hydrogels, which have polymer networks through supramolecular and reversible interactions, exhibit various mechanical responsibilities to its surroundings. The influence of the reversible bonds on a hydrogel's macroscopic properties, such as viscoelasticity and dynamics, is not fully understood, preventing further innovative material development. To understand the relationships between the mechanical properties and molecular structures, it is required to clarify the molecular understanding of the networks solely crosslinked by reversible interactions, termed "transient networks". This review introduces our recent progress on the studies on the molecular mechanism of viscoelasticity in transient networks using multiple methods and model materials. Based on the combination of the viscoelasticity and diffusion measurements, the viscoelastic relaxation of transient networks does not undergo the diffusion of polymers, which is not explained by the framework of conventional molecular models for the viscoelasticity of polymers. Then, we show the results of the comparison between the viscoelastic relaxation and binding dynamics of reversible bonds. Viscoelastic relaxation is primarily affected by "dissociation dynamics of the bonds" and "network structures". These results are explained in the framework that the backbone, which is composed of essential chains supporting the stress, is broken by multiple dissociation events. This understanding of molecular dynamics in viscoelasticity will provide the foundation for designing transient networks.

Unveiling the structural relaxation of microgel suspensions at hydrophilic and hydrophobic interfaces

HYPOTHESIS

Poly(N-isopropylacrylamide) (PNIPAM) microgel particles show considerable hydrophilicity below the lower critical solution temperature (LCST) while they become hydrophobic above LCST. We hypothesize that interfacial wettability could tune particle-surface interaction and subsequent structural relaxation of microgel suspensions at interfaces during the volume phase transition.

EXPERIMENTS

The evanescent-wave scattering images of microgels at hydrophilic and hydrophobic interfaces are analyzed by a density-fluctuation autocorrelation function (δACF) over a wide range of particle volume fraction ϕ. The structural relaxation is characterized by the decay behavior of δACF. The scattering images in bulk are also processed as a comparison.

FINDINGS

A two-step relaxation decay is observed at both hydrophilic and hydrophobic interfaces. Relative to fast decay, the rate of structural relaxation in slow decay is reduced by a factor of ∼ 500 and ∼ 50 at hydrophilic and hydrophobic interfaces, respectively. The relaxation times obey divergent power-law dependences on intermediate regime of observing length scales at the two interfaces. Besides, the distribution of fluctuation for relaxation time at different local regions reveals that the structural relaxation is much more homogenous at hydrophilic interfaces than that at hydrophobic interfaces, especially at high ϕ.

A Trilaminar-Thermosensitive Hydrogel Catalytic Reactor Capable of Single/Tandem Catalytic Switchable Ability

The present endeavor is to develop a highly-intelligent catalytic reactor prototype which is able to autonomously adapt to the environment and provides an in-situ double-shift catalytic ability. By seeking inspiration from nature, this objective is achieved by developing a self-adaptive hydrogel catalytic reactor which held a catalytic trilaminar structure capable of reverse thermosensitive properties. With increasing temperatures, the catalytic tri-layers of this catalytic reactor would function in a sequential way (i.e., one negative temperature response layer, one support layer and one positive temperature response layer) and as a result, led to the single-tandem double-shift catalytic ability. This catalytic reactor individually presented single/tandem catalytic process at relatively low temperatures or high temperatures through the cooperative work of the three layers. In this way, this catalytic reactor showed the single-tandem controllable catalytic ability. The novel protocol not only provides a new solution to complicated catalytic processes but also inspires the further application of smart polymers in a broader spectrum of areas.

Translating Therapeutic Microgels into Clinical Applications

Microgels are crosslinked, water-swollen networks with a 10 nm to 100 µm diameter and can be modified chemically or biologically to render them biocompatible for advanced clinical applications. Depending on their intended use, microgels require different mechanical and structural properties, which can be engineered on demand by altering the biochemical composition, crosslink density of the polymer network, and the fabrication method. Here, the fundamental aspects of microgel research and development, as well as their specific applications for theranostics and therapy in the clinic, are discussed. A detailed overview of microgel fabrication techniques with regards to their intended clinical application is presented, while focusing on how microgels can be employed as local drug delivery materials, scavengers, and contrast agents. Moreover, microgels can act as scaffolds for tissue engineering and regeneration application. Finally, an overview of microgels is given, which already made it into pre-clinical and clinical trials, while future challenges and chances are discussed. This review presents an instructive guideline for chemists, material scientists, and researchers in the biomedical field to introduce them to the fundamental physicochemical properties of microgels and guide them from fabrication methods via characterization techniques and functionalization of microgels toward specific applications in the clinic.

The fuzzy sphere morphology is responsible for the increase in light scattering during the shrinkage of thermoresponsive microgels

Thermoresponsive microgels undergo a volume phase transition from a swollen state under good solvent conditions to a collapsed state under poor solvent conditions. The most prominent examples of such responsive systems are based on poly-(N-isopropylacrylamide). When cross-linked with N,N'-methylenebisacrylamide, such microgels typically possess a fuzzy-spherelike morphology with a higher cross-linked core and a loosely cross-linked fuzzy shell. Despite the efforts devoted to understanding the internal structure of microgels and their kinetics during collapse/swelling, the origins of the accompanying changes in light scattering intensity have barely been addressed. In this work, we study core-shell microgels that contain small gold nanoparticle cores with microgel shells of different thicknesses and cross-linker densities. All microgels are small enough to fulfill the Rayleigh-Debye-Gans criterion at all stages of swelling. Due to the high X-ray contrast of the gold cores, we can use absolute intensity small-angle X-ray scattering to determine the number density in the dilute dispersions. This allows us to extract polymer volume fractions of the microgels at different stages of swelling from form factor analysis of small-angle neutron scattering data. We match our findings to results from temperature-dependent absorbance measurements. The increase in absorbance during the shrinkage of the microgels is related to the transition from fuzzy spheres to hard sphere-like scattering objects with a rather homogeneous density profile. We provide a first attempt to model experimental spectra using finite difference time domain simulations that take into account the structural changes during the volume phase transition. Our findings significantly contribute to the understanding of the optical properties of thermoresponsive microgels. Further, we provide polymer volume fractions and microgel refractive indices as a function of the swelling state.

On the role of softness in ionic microgel interactions

Thermoresponsive microgels are a popular model system to study phase transitions in soft matter, because temperature directly controls their volume fraction. Ionic microgels are additionally pH-responsive and possess a rich phase diagram. Although effective interaction potentials between microgel particles have been proposed, these have never been fully tested, leading to a gap in our understanding of the link between single-particle and collective properties. To help resolve this gap, four sets of ionic microgels with varying crosslinker density were synthesised and characterised using light scattering techniques and confocal microscopy. The resultant structural and dynamical information was used to investigate how particle softness affects the phase behaviour of ionic microgels and to validate the proposed interaction potential. We find that the architecture of the microgel plays a marked role in its phase behaviour. Rather than the ionic charges, it is the dangling ends which drive phase transitions and interactions at low concentration. Comparison to theory underlines the need for a refined theoretical model which takes into consideration these close-contact interactions.

Glass-liquid and glass-gel transitions of soft-shell particles

We study the structure and dynamics of colloidal particles with a spherical hard core and a thermo-responsive soft shell over the whole phase diagram by means of small-angle x-ray scattering and x-ray photon correlation spectroscopy. By changing the effective volume fraction by temperature and particle concentration, liquid, repulsive glass. and attractive gel phases are observed. The dynamics slow down with increasing volume fraction in the liquid phase and reflect a Vogel-Fulcher-Tamann behavior known for fragile glass formers. We find a liquid-glass transition above 50 vol.% that is independent of the particles' concentration and temperature. In an overpacked state at effective volume fractions above 1, the dispersion does not show a liquid phase but undergoes a gel-glass transition at an effective volume fraction of 34 vol.%. At the same concentration, extrema of subdiffusive dynamics are found in the liquid phase at lower weight fractions. We interpret this as dynamic precursors of the glass-gel transition.

A facile evanescent-field imaging approach for monitoring colloidal gel evolution near a surface

A facile evanescent-field imaging approach is developed to probe the aggregation behavior of near-wall colloids/clusters during colloidal gel evolution. Total internal reflection microscope (TIRM) images are directly utilized to access the structural relaxation time via density-fluctuation theory. The behaviors of cluster-cluster aggregation and physical aging of the colloidal gel networks are resolved in both time and space under fractal scaling criteria.

Cancer Nanopharmaceuticals: Physicochemical Characterization and In Vitro/In Vivo Applications

Physicochemical, pharmacokinetic, and biopharmaceutical characterization tools play a key role in the assessment of nanopharmaceuticals' potential imaging analysis and for site-specific delivery of anti-cancers to neoplastic cells/tissues. If diagnostic tools and therapeutic approaches are combined in one single nanoparticle, a new platform called nanotheragnostics is generated. Several analytical technologies allow us to characterize nanopharmaceuticals and nanoparticles and their properties so that they can be properly used in cancer therapy. This paper describes the role of multifunctional nanoparticles in cancer diagnosis and treatment, describing how nanotheragnostics can be useful in modern chemotherapy, and finally, the challenges associated with the commercialization of nanoparticles for cancer therapy.

Microrheology of thermoresponsive poly(N-isopropylacrylamide) microgel dispersions near a substrate surface

HYPOTHESIS

Relative to the bulk systems, the near-wall (<500 nm) rheological responses of soft poly(N-isopropylacrylamide) (PNIPAM) microgel dispersions may exhibit distinct dependence on the frequency (ω), temperature (T), and effective volume fraction (ϕ_eff) during the volume phase transitions. The microrheological behaviors are expected to be governed by the near-wall microstructure and its spatial heterogeneity.

EXPERIMENTS

The combination of active microrheometry (multipole magnetic tweezers) and total internal reflection microscopy (TIRM) was employed to probe the structure-rheology relationships of microgel dispersions near a substrate surface. The ω, T, and ϕ_eff-dependences of the storage modulus (G'), loss modulus (G"), and softness (J) were analyzed by power-law and Arrhenius-like scaling theories. The fluctuation of J was further analyzed to give a quantitative description of the inhomogeneity in the near-wall regions.

FINDINGS

(1) Remarkable differences in the rheological behaviors between the bulk and near-wall cases are revealed, where the latter shows a segmented overlap behavior in ϕ_eff; (2) Five regimes of ϕ_eff that correspond to distinct physical states of the microgel dispersions are determined; (3) The near-wall local structures exhibit more heterogeneity in the glass and colloidal gel regimes as compared to the liquid regime.

On Going to a New Era of Microgel Exhibiting Volume Phase Transition

The discovery of phenomena of volume phase transition has had a great impact not only on bulk gels but also on the world of microgels. In particular, research on poly(N-isopropylacrylamide) (PNIPAM) microgels, whose transition temperature is close to body temperature, has made remarkable progress in almost 35 years. This review presents some breakthrough findings in microgels that exhibit volume phase transitions and outlines recent works on the synthesis, structural analysis, and research direction of microgels.

Two-step yielding behavior of densely packed microgel mixtures with chemically dissimilar surfaces and largely different sizes

Steady-state flow and elastic behavior is investigated for the moderately concentrated binary suspensions of soft microgels (pastes) with chemically dissimilar surfaces, and various degrees of size- and stiffness disparities. The pastes of poly(N-isopropyl acrylamide) (N) and poly(N-isopropyl methacrylamide) (NM) microgels with different values of yield strain γc (γNc > γNMc) are employed as the components. For the single microgel pastes (φ ≈ 1 where φ is apparent volume fraction), the values of γc are governed by the chemical species of constituent polymer in microgel surface whereas γc is insensitive to cross-link density and particle size. We demonstrate that the binary N/NM pastes with large size disparity (RN/NM = DN/DNM < 0.26 where D is the microgel diameter) at low φN (φN: weight fraction of small N microgels) exhibit the peculiarities in several rheological aspects, i.e., the two-step yielding in steady-state flow, and their values of γc and equilibrium shear modulus (G0) being equivalent to those of the single large NM microgel paste. These peculiarities are attributed to the characteristic packing resulting from large size disparity in which all or almost of the small N microgels tend to be accommodated in the gap between the large NM microgels even in moderately concentrated state. This characteristic packing substantially masks the contribution of the small N microgels at low φN, explaining the φN-independent G0 and γc as well as the first yielding governed solely by the large NM microgels. The second yielding results from the emerged contribution of the small N microgels expelled out from the gap by the positional rearrangements after the first yielding. The binary homo-N/N pastes with the similarly large size disparity at low φsmall also exhibit the φsmall-independent values of G0, but they show one-step yielding, indicating that the two-step yielding requires not only sufficiently large size disparity but also chemical dissimilarity (different values of γc) between the two components.

Dynamic Bioinks to Advance Bioprinting

The development of bioinks for bioprinting of cell-laden constructs remains a challenge for tissue engineering, despite vigorous investigation. Hydrogels to be used as bioinks must fulfill a demanding list of requirements, mainly focused around printability and cell function. Recent advances in the use of supramolecular and dynamic covalent chemistry (DCvC) provide paths forward to develop bioinks. These dynamic hydrogels enable tailorability, higher printing performance, and the creation of more life-like environments for ultimate tissue maturation. This review focuses on the exploration and benefits of dynamically cross-linked bioinks for bioprinting, highlighting recent advances, benefits, and challenges in this emerging area. By incorporating internal dynamics, many benefits can be imparted to the material, providing design elements for next generation bioinks.

Moiré and honeycomb lattices through self-assembly of hard-core/soft-shell microgels: experiment and simulation

Moiré and honeycomb lattices result from the sequential double deposition of monolayers of core/shell microgels in dependence of the drying conditions.