Effects of pH, temperature and shear on the structure-property relationship of lamellar hydrogels from microbial glucolipids probed by in situ rheo-SAXS

Harnessing Glycolipids for Supramolecular Gelation: A Contemporary Review

Within the scope of this review, our exploration spans diverse facets of amphiphilic glycolipid-based low-molecular-weight gelators (LMWGs). This journey explores glycolipid synthesis, self-assembly, and gelation with tailorable properties. It begins by examining the design of glycolipids and their influence on gel formation. Following this, a brief exploration of several gel characterization techniques adds another layer to the understanding of these materials. The final section is dedicated to unraveling the various applications of these glycolipid-based supramolecular gels. A meticulous analysis of available glycolipid gelators and their correlations with desired properties for distinct applications is a pivotal aspect of their investigation. As of the present moment, there exists a notable absence of a review dedicated exclusively to glycolipid gelators. This study aims to bridge this critical gap by presenting an overview that provides novel insights into their unique properties and versatile applications. This holistic examination seeks to contribute to a deeper understanding of molecular design, structural characteristics, and functional applications of glycolipid gelators by offering insights that can propel advancements in these converging scientific disciplines. Overall, this review highlights the diverse classifications of glycolipid-derived gelators and particularly emphasizes their capacity to form gels.

Small-angle scattering of complex fluids in flow

Complex fluids encompass a significant proportion of the materials that we use today from feedstocks such as cellulose fibre dispersions, materials undergoing processing or formulation, through to consumer end products such as shampoo. Such systems exhibit intricate behaviour due to their composition and microstructure, particularly when analysing their texture and response to flow (rheology). In particular, these fluids when flowing may undergo transitions in their nano- to microstructure, potentially aligning with flow fields, breaking and reassembling or reforming, or entirely changing phase. This manifests as macroscopic changes in material properties, such as core-annular flow of concentrated emulsions in pipelines or the favourable texture of liquid soaps. Small-angle scattering provides a unique method for probing underlying changes in fluid nano- to microstructure, from a few angströms to several microns, of complex fluids under flow. In particular, the alignment of rigid components or shape changes of soft components can be explored, along with local inter-particle ordering and global alignment with macroscopic flow fields. This review highlights recent important developments in the study of such complex fluid systems that couple flow or shear conditions with small-angle scattering measurements, and highlights the physical insight obtained by these experiments. Recent results from neutron scattering measurements made using a simple flow cell are presented, offering a facile method to explore alignment of complex fluids in an easily accessible geometry, and contextualised within existing and potential future research questions.

Shear influence on colloidal cluster growth: a SANS and USANS study

This study examines the time evolution of silica/water clusters where the formation of a gel network from unitary silica particles is interrupted by a simple Couette shear field. The aim is to enable the general understanding of this simple system by examining the microscopic basis for the changes in viscosity by providing structural inputs from small-angle scattering for a simple theoretical model. The experimental system is an 8.3 nm particle silica solution (Ludox) where the gelation has been initiated by lowering the pH in a Couette cell providing a constant shear rate of 250 s-1. A unified small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) procedure is described to measure the scattered intensity in a wavevector range of 3 × 10-4 ≤ q (nm-1) ≤ 3.1 × 10-1, probing structural changes over a broad range of length scales from the nanometre to the micrometre. Scattering data provide a new means of better understanding the behaviour of colloidal clusters when subjected to an external applied shear over a continuous time sequence after gel initiation; a fit of the time-dependent scattered intensity leads to an estimation of the cluster's effective volume fraction and size as a function of time. A reductionist theoretical basis is described to predict the time-dependent viscosity behaviour of the sheared colloidal suspension gel-initiated cluster growth from the volume fraction of the clusters.

Computational approach for structure generation of anisotropic particles (CASGAP) with targeted distributions of particle design and orientational order

The macroscopic properties of materials are governed by their microscopic structure which depends on the materials' composition (i.e., building blocks) and processing conditions. In many classes of synthetic, bioinspired, or natural soft and/or nanomaterials, one can find structural anisotropy in the microscopic structure due to anisotropic building blocks and/or anisotropic domains formed through the processing conditions. Experimental characterization and complementary physics-based or data-driven modeling of materials' structural anisotropy are critical for understanding structure-property relationships and enabling targeted design of materials with desired macroscopic properties. In this pursuit, to interpret experimentally obtained characterization results (e.g., scattering profiles) of soft materials with structural anisotropy using data-driven computational approaches, there is a need for creating real space three-dimensional structures of the designer soft materials with realistic physical features (e.g., dispersity in building block sizes) and anisotropy (i.e., aspect ratios of the building blocks, their orientational and positional order). These real space structures can then be used to compute and complement experimentally obtained characterization results or be used as initial configurations for physics-based simulations/calculations that can then provide training data for machine learning models. To address this need, we present a new computational approach called CASGAP - Computational Approach for Structure Generation of Anisotropic Particles - for generating any desired three dimensional real-space structure of anisotropic building blocks (modeled as particles) adhering to target distributions of particle shape, size, and positional and orientational order.

In Situ Stimulation of Self-Assembly Tunes the Elastic Properties of Interpenetrated Biosurfactant-Biopolymer Hydrogels

Hydrogels are widespread soft materials, which can be used in a wide range of applications. The control over the viscoelastic properties of the gel is of paramount importance. Ongoing environmental issues have raised the consumer's concern toward the use of more sustainable materials, including hydrogels. However, are greener materials compatible with high functionality? In a safe-by-design approach, this work demonstrates that functional hydrogels with in situ responsivity of their elastic properties by external stimuli can be developed from entirely "sustainable" components, a biobased amphiphile and biopolymers (gelatin, chitosan, and alginate). The bioamphiphile is a stimuli-responsive glycolipid obtained by microbial fermentation, which can self-assemble into fibers, but also micelles or vesicles, in water under high dilution and by a rapid variation of the stimuli. The elastic properties of the bioamphiphile-/biopolymer-interpenetrated hydrogels can be modulated by selectively triggering the phase transition of the glycolipid and/or the biopolymer inside the gel by mean of temperature or pH.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are a promising strategy to improve the oral bioavailability of poorly water-soluble drugs (PWSD). The excipients of SEDDS enable permeation through the mucus and gastro-intestinal barrier, inhibiting efflux transporters (e.g. P-glycoprotein) of drugs. Poor drug loading capacity and formulation instability are the main setbacks of traditional SEDDS. The use of polymeric precipitation inhibitors was shown to create supersaturable SEDDS with increased drug payload, and their solidification can help to overcome the instability challenge. As an alternative to several existing SEDDS solidification technologies, hot melt extrusion (HME) holds the potential for lean and continuous manufacturing of supersaturable solid-SEDDS. Despite being ubiquitously applied in solid lipid and polymeric processing, HME has not yet been widely considered for the preparation of SEDDS.

AREAS COVERED

The review begins with the rationale why SEDDS as the preferred lipid-based delivery systems (LBDS) is suitable for the oral delivery of PWSD and discusses the common barriers to oral administration. The potential of LBDS to surmount them is discussed. SEDDS as the flagship of LBDS for PWSD is proposed with a special emphasis on solid-SEDDS. Finally, the opportunities and challenges of HME from the lipid-based excipient (LBE) processing and product performance standpoint are highlighted.

EXPERT OPINION

HME can be a continuous, solvent-free, cost-effective, and scalable technology for manufacturing solid supersaturable SEDDS. Several critical formulations and process parameters in successfully preparing SEDDS via HME are identified.

Palmitic acid sophorolipid biosurfactant: from self-assembled fibrillar network (SAFiN) to hydrogels with fast recovery

Nanofibres are an interesting phase into which amphiphilic molecules can self-assemble. Described for a large number of synthetic lipids, they were seldom reported for natural lipids like microbial amphiphiles, known as biosurfactants. In this work, we show that the palmitic acid congener of sophorolipids (SLC16:0), one of the most studied families of biosurfactants, spontaneously forms a self-assembled fibre network (SAFiN) at pH below 6 through a pH jump process. pH-resolved in situ small-angle X-ray scattering (SAXS) shows a continuous micelle-to-fibre transition, characterized by an enhanced core-shell contrast between pH 9 and pH 7 and micellar fusion into a flat membrane between pH 7 and pH 6, approximately. Below pH 6, homogeneous, infinitely long nanofibres form by peeling off the membranes. Eventually, the nanofibre network spontaneously forms a thixotropic hydrogel with fast recovery rates after applying an oscillatory strain amplitude out of the linear viscoelastic regime: after being submitted to strain amplitudes during 5 min, the hydrogel recovers about 80% and 100% of its initial elastic modulus after, respectively, 20 s and 10 min. Finally, the strength of the hydrogel depends on the medium's final pH, with an elastic modulus fivefold higher at pH 3 than at pH 6. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

Protein Hydrogels: The Swiss Army Knife for Enhanced Mechanical and Bioactive Properties of Biomaterials

Biomaterials are dynamic tools with many applications: from the primitive use of bone and wood in the replacement of lost limbs and body parts, to the refined involvement of smart and responsive biomaterials in modern medicine and biomedical sciences. Hydrogels constitute a subtype of biomaterials built from water-swollen polymer networks. Their large water content and soft mechanical properties are highly similar to most biological tissues, making them ideal for tissue engineering and biomedical applications. The mechanical properties of hydrogels and their modulation have attracted a lot of attention from the field of mechanobiology. Protein-based hydrogels are becoming increasingly attractive due to their endless design options and array of functionalities, as well as their responsiveness to stimuli. Furthermore, just like the extracellular matrix, they are inherently viscoelastic in part due to mechanical unfolding/refolding transitions of folded protein domains. This review summarizes different natural and engineered protein hydrogels focusing on different strategies followed to modulate their mechanical properties. Applications of mechanically tunable protein-based hydrogels in drug delivery, tissue engineering and mechanobiology are discussed.

Table-top combined scanning X-ray small angle scattering and transmission microscopies of lipid vesicles dispersed in free-standing gel

A mm thick free-standing gel containing lipid vesicles made of 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC) was studied by scanning Small Angle X-ray Scattering (SAXS) and X-ray Transmission (XT) microscopies. Raster scanning relatively large volumes, besides reducing the risk of radiation damage, allows signal integration, improving the signal-to-noise ratio (SNR), as well as high statistical significance of the dataset. The persistence of lipid vesicles in gel was demonstrated, while mapping their spatial distribution and concentration gradients. Information about lipid aggregation and packing, as well as about gel density gradients, was obtained. A posteriori confirmation of lipid presence in well-defined sample areas was obtained by studying the dried sample, featuring clear Bragg peaks from stacked bilayers. The comparison between wet and dry samples allowed it to be proved that lipids do not significantly migrate within the gel even upon drying, whereas bilayer curvature is lost by removing water, resulting in lipids packed in ordered lamellae. Suitable algorithms were successfully employed for enhancing transmission microscopy sensitivity to low absorbing objects, and allowing full SAXS intensity normalization as a general approach. In particular, data reduction includes normalization of the SAXS intensity against the local sample thickness derived from absorption contrast maps. The proposed study was demonstrated by a room-sized instrumentation, although equipped with a high brilliance X-ray micro-source, and is expected to be applicable to a wide variety of organic, inorganic, and multicomponent systems, including biomaterials. The employed routines for data reduction and microscopy, including Gaussian filter for contrast enhancement of low absorbing objects and a region growing segmentation algorithm to exclude no-sample regions, have been implemented and made freely available through the updated in-house developed software SUNBIM.