Expanding the scope of chemiluminescence in bioanalysis with functional nanomaterials

Microfluidic paper-based chemiluminescence sensing platform based on functionalized CaCO3 for time-resolved multiplex detection of avian influenza virus biomarkers

Multiplex detection can enhance diagnostic precision and improve diagnostic efficiency, providing important assistance for epidemiological investigation and epidemic prevention. There is a great need for multi-detection sensing platforms to accurately diagnose diseases. Herein, we reported a μPAD-based chemiluminescence (CL) assay for ultrasensitive multiplex detection of AIV biomarkers, based on three DNAzyme/Lum/PEI/CaCO3. Three time-resolved CL signals were sequentially generated with detection limits of 0.32, 0.34, and 0.29 pM for H1N1, H7N9, and H5N1, respectively, and with excellent selectivity against interfering DNA. The recovery test in human serum displayed satisfactory analysis capabilities for complex biological samples. The μPAD-based CL assay achieved multiplex detection within 70 s, with a high time resolution of 20 s. The proposed strategy has the advantages of low cost, high sensitivity, good selectivity, and wide time resolution, the μPAD-based CL assay has shown great potential in the early and accurate diagnosis of diseases.

Nucleic acid aptamer-based biosensors and their application in thrombin analysis

Thrombin is a multifunctional serine protease that plays an important role in coagulation and anticoagulation processes. Aptamers have been widely applied in biosensors due to their high specificity, low cost and good biocompatibility. This review summarizes recent advances in thrombin quantification using aptamer-based biosensors. The primary focus is optical sensors and electrochemical sensors, along with their applications in thrombin analysis and disease diagnosis.

Microfluidic Biosensor Integrated with Signal Transduction and Enhancement Mechanism for Ultrasensitive Noncompetitive Assay of Multiple Mycotoxins

To achieve high-throughput ultrasensitive detection of mycotoxins in food, a functional DNA-guided transition-state CRISPR/Cas12a microfluidic biosensor (named FTMB) was successfully constructed. The signal transduction CRISPR/Cas12a strategy in FTMB has utilized DNA sequences with a specific recognition function and activators to form trigger switches. Meanwhile, the transition-state CRISPR/Cas12a system was constructed by adjusting the composition ratio of crRNA and activator to achieve a high response for low concentrations of target mycotoxins. On the other hand, the signal enhancement of FTMB has efficiently integrated the signal output of quantum dots (QDs) with the fluorescence enhancement effect of photonic crystals (PCs). The construction of universal QDs for the CRISPR/Cas12a system and PC films matching the photonic bandgap produced a significant signal enhancement by a factor of 45.6. Overall, FTMB exhibited a wide analytic range (10^-5-10¹ ng·mL^-1), low detection of limit (fg·mL^-1), short detection period (∼40 min), high specificity, good precision (coefficients of variation <5%), and satisfactory practical sample analysis capacity (the consistency with HPLC at 88.76%-109.99%). It would provide a new and reliable solution for the rapid detection of multiple small molecules in the fields of clinical diagnosis and food safety.

Multifunctionalized flower-like gold nanoparticles with high chemiluminescence for label-free sensing of the hepatitis C virus core protein

Developing functionalized nanomaterials with strong chemiluminescence (CL) properties is highly significant for ultrasensitive bioanalysis. Here, we report chitosan (CS), luminol, and Co²⁺-functionalized flower-like gold nanoparticles (Co²⁺/CS/Lum/AuNFs) with strong CL for the label-free sensing of the HCV core protein (HCVcp). The Co²⁺/CS/Lum/AuNFs exhibited a greatly enhanced CL emission at around 425 nm, which is 50 times stronger than that of CS/Lum/AuNFs, and is superior to other commonly reported CL nanomaterials. The HCVcp aptamer (HCVcp-apt) further functionalized the surface of the Co²⁺/CS/Lum/AuNFs through electrostatic interactions blocked the Co²⁺ catalytic site, depressing the CL. Owing to the high affinity of HCVcp for the HCVcp-apt, the presence of HCVcp predominated its binding and effectively separated the HCVcp-apt from the surface of the Co²⁺/CS/Lum/AuNFs, so that the CL intensity was significantly enhanced. As the results showed, the HCVcp-apt/Co²⁺/CS/Lum/AuNFs were successfully used to detect the HCVcp in human serum samples with a linear range from 0.50 ng mL^-1 to 1.00 μg mL^-1, a detection limit of 0.16 ng mL^-1 and an excellent selectivity over other analogs. The strategy is universal for the development of the ultrasensitive detection of other proteins in the field of early disease diagnostics.

Enhanced Luminol Chemiluminescence with Oxidase-like Properties of FeOOH Nanorods for the Sensitive Detection of Uric Acid

FeOOH nanorods, as one-dimensional nanomaterials, have been widely used in many fields due to their stable properties, low cost, and easy synthesis, but their application in the field of chemiluminescence (CL) is rarely reported. In this work, FeOOH nanorods were synthesized by a simple and environmentally friendly one-pot hydrothermal method and used for the first time as a catalyst for generating strong CL with luminol without additional oxidant. Remarkably, luminol-FeOOH exhibits about 250 times stronger CL than the luminol-H₂O₂ system. Its CL intensity was significantly quenched by uric acid. We established a simple, rapid, sensitive, and selective CL method for the detection of uric acid with a linear range of 20-1000 nM and a detection limit of 6.3 nM (S/N = 3). In addition, we successfully applied this method to the detection of uric acid in human serum, and the standard recoveries were 95.6-106.4%.

A novel enzyme-free long-lasting chemiluminescence system based on a luminol functionalized β-cyclodextrin hydrogel for sensitive detection of H2O2 in urine and cells

A novel long-lasting chemiluminescent (CL) hydrogel (β-CD@luminol-Co²⁺) was synthesized by embedding luminol and cobalt ions (Co²⁺) into β-cyclodextrin (β-CD) through non-covalent interactions. Due to its porous structure and viscosity, the synthesized β-CD@luminol-Co²⁺ hydrogel exhibited long-lasting CL properties and can emit light for 12 h under both alkaline and neutral conditions. In addition, the CL intensities of β-CD@luminol-Co²⁺ were linear with the logarithm of the hydrogen peroxide (H₂O₂) concentration in the range of 1.0 × 10^-11-1.0 × 10^-7 M, and the limit of detection (LOD) was 0.63 × 10^-11 M and 0.85 × 10^-11 M under alkaline and neutral conditions, respectively. On this basis, an enzyme-free CL sensor based on β-CD@luminol-Co²⁺ was fabricated for the sensitive detection of H₂O₂ in human urine samples under alkaline conditions, and showed good accuracy and recovery. Since β-CD@luminol-Co²⁺ showed good CL properties under neutral conditions, it can be applied to detect H₂O₂ in cells. In order to prolong the emission wavelength of β-CD@luminol-Co²⁺ for better cell imaging, β-CD@luminol-FL-Co²⁺ was prepared by adding fluorescein (FL) to β-CD@luminol-Co²⁺. The as-prepared β-CD@luminol-FL-Co²⁺ also displayed long-lasting CL properties and showed a linear relationship with H₂O₂ concentrations. In addition, the maximum emission wavelength of β-CD@luminol-FL-Co²⁺ was 520 nm, which was red-shifted by 95 nm compared with β-CD@luminol-Co²⁺. The methyl thiazolyl tetrazolium (MTT) assay results and confocal microscopy images illustrated that β-CD@luminol-FL-Co²⁺ had low toxicity and can be taken up by A549 cells. Finally, β-CD@luminol-FL-Co²⁺ was successfully applied for CL imaging and detection of intracellular H₂O₂ in A549 cells under neutral conditions. This enzyme-free long-lasting CL system with high sensitivity can also be extended to real-time monitoring of H₂O₂in vivo.

Oxygen Vacancy-Dependent Chemiluminescence: A Facile Approach for Quantifying Oxygen Defects in ZnO

Defect engineering is an effective strategy to improve the catalytic activity of metal oxides, and quantitative characterization of surface defects is thus vital to the understanding and application of metal oxide catalysts. Herein, we found that ZnO nanoparticles with oxygen vacancy could trigger the luminol-H₂O₂ system to emit a strong chemiluminescence (CL), and the CL intensity was strongly dependent on the oxygen vacancy of the ZnO nanoparticles. The mechanism of this CL reaction was discussed by means of the electron-spin resonance spectrum, X-ray photoelectron spectrum (XPS), and CL spectrum. The oxygen vacancy-dependent CL was attributed to the ability of the oxygen vacancy to readily adsorb and further dissociate H₂O₂ into active ^•OH radicals. Taking advantage of this oxygen vacancy-dependent CL, we presented one method for quantifying the oxygen defects in ZnO. Compared with the current evaluation techniques (XPS and Raman spectroscopy), this CL method is rapid, low-cost, and easy to operate. This work introduces the CL technique into the field of material structure-property evaluation, and provides a new approach for exploring the defect function in ZnO defect engineering.

Chemiluminescent magnetic nanoparticles with good catalytic activity and rapid separation capability and sensitive sensing for H2O2

It is of considerable importance to develop chemiluminescent functionalized nanomaterials (CF-NMs) with good catalytic activity, high chemiluminescence (CL) efficiency and good stability, and rapid magnetic separation capability, achieving excellent performance in CL biosensing. In this study, N-(4-aminobutyl)-N-ethylisoluminol (ABEI)-functionalized CuFe2O4 magnetic nanomaterial (ABEI/CuFe2O4) with high catalytic activity was synthesized by virtue of a solvothermal and post-functionalization method. ABEI/CuFe2O4 showed outstanding CL properties, superior to ABEI-CuFe2O4 in liquid phase. This reveals that the immobilization of ABEI on the surface of CuFe2O4 exhibits unique heterogeneous catalytic property. The catalytic ability of CuFe2O4 was better than that of CoFe2O4, ZnFe2O4, MnFe2O4, and NiFe2O4. It is suggested that the peroxide-like activity as well as Cu2+ and Cu0 enriched on the surface of ABEI/CuFe2O4 opened up a dual route for synergistic catalysis of H2O2. ABEI/CuFe2O4 also demonstrated good superparamagnetism and magnetic separation could be carried out in 2 min, which is advantageous for the separation and purification of ABEI/CuFe2O4 during the synthetic procedures and bioassays. Owing to the sensitive response of ABEI/CuFe2O4 to H2O2, an enzyme-free sensor was developed for the detection of H2O2 with a wide linear range over 5 orders of magnitude of H2O2 concentrations and a low detection limit of 5.6 nM. The as-developed sensor is sensitive, stable, and convenient. This work provides a new family member of nanomaterials with good magnetism and CL activity as well as good stability. The developed ABEI/CuFe2O4 shows great prospects in biocatalysis, bioassays, biosensing, and bioimaging, etc.

Trimetallic AuPtCo Nanopolyhedrons with Peroxidase- and Catalase-Like Catalytic Activity for Glow-Type Chemiluminescence Bioanalysis

Chemiluminescence (CL) with stable and glowing light emission is vital for the accurate detection of biomarkers. Moreover, the catalyst plays an important role in CL systems. Herein, the trimetallic AuPtCo nanopolyhedrons with peroxidase- and catalase-like catalytic activities are readily synthesized via a one-step reduction method. After reaction with the substrate ABEI and oxidant H₂O₂, the AuPtCo nanozyme can catalyze the CL emission in a flash type. Interestingly, it has been found that the biofunctionalization of the AuPtCo surface can endow the catalytic interface with a slow-diffusion effect, thereby prolonging the emission of glow-type CL. On this basis, two biofunctionalized AuPtCo nanocomposites, named as AuPtCo@Cys and AuPtCo@Ab, are prepared, achieving sensitive and selective detection of H₂O₂ and lipoprotein-associated phospholipase A₂ (Lp-PLA₂), respectively. Further, the proposed glow-type CL assays are successfully applied for the determination of H₂O₂ and Lp-PLA₂ in female vaginal discharge and human serum samples, respectively, which exhibit good correlation with the clinical results. Overall, the trimetallic AuPtCo nanozyme-based glow-type CL analysis has demonstrated as a powerful and robust tool for biomarker analysis, which holds great promise in clinical applications.

An ultrasensitive chemiluminescent biosensor for tracing glutathione in human serum using BSA@AuNCs as a peroxidase-mimetic nanozyme on a luminol/artesunate system

In this work, a nanosensor chemiluminescent (CL) probe for sensing glutathione (GSH) was developed, for the first time, based on its inhibition of the intrinsic peroxidase-mimetic effect of BSA@AuNCs. The endoperoxide linkage of artesunate could be hydrolyzed by BSA@AuNCs resulting in the release of reactive oxygen species (ROS), and the consequent generation of strong CL emission. By virtue of the strong covalent interactions of -S⋯Au-, GSH could greatly suppress the peroxidase-mimetic effect of BSA@AuNCs, leading to a drastic CL quenching. The CL quenching efficiency increased proportionally to the logarithm of GSH concentration through the linearity range of 50.0-5000.0 nM with a limit of detection of 5.2 nM. This CL-based strategy for GSH tracing demonstrated the advantages of ultrasensitivity, high selectivity and simplicity. This strategy was successfully utilized to measure GSH levels in human serum with reasonable recovery results of 98.71%, 103.18%, and 101.68%, suggesting that this turn-off CL sensor is a promising candidate for GSH in biological and clinical samples.

Metal enhanced chemiluminescence nanosensor for ultrasensitive bioassay based on silver nanoparticles modified functional DNA dendrimer

A novel metal enhanced chemiluminescence (MEC) nanosensor was developed for ultrasensitive biosensing and imaging, based on functional DNA dendrimer (FDD), proximity-dependent DNAzyme and silver nanoparticles (AgNPs). The FDD containing two split G-quadruplex structures was prepared through an enzyme-free and step-by-step assembly strategy, and then reacted with AgNPs and hemin molecules to form the FDD/hemin/AgNPs facilely. Such a MEC nanosensor consisted of three modules: FDD (scaffold), the generated G-quadruplex/hemin DNAzyme (signal reporter) and AgNPs (chemiluminescence enhancer). The MEC effect was achieved by controlling the length of DNA sequences between AgNPs on the periphery of FDD and DNAzymes inside it. Such nanosensor exhibited 9-fold amplification and another 6.4-fold metal enhancement in chemiluminescence intensity, which can be easily applied into trace detection of multiple protein markers using a disposable protein immunoarray. The FDD/hemin/AgNPs-based multiplex MEC imaging assay showed wide linear ranges over 5 orders of magnitude and detection limits down to 5× 10^-5 ng L^-1 and 1.8 × 10^-4 U mL^-1 for cardiac troponin T and carcinoma antigen 125, demonstrating a promising potential in application to protein analysis and clinical diagnosis. Moreover, the MEC nanosensor can be effectively delivered into cells with excellent biocompatibility and outstanding stability, offering a new tool for detection of intracellular targets and suggesting wide applications in bioassay.

Nanomaterial-enhanced chemiluminescence reactions and their applications

Chemiluminescence (CL) analysis is a trace analytical method that possesses advantages including high sensitivity, wide linear range, easy operation, and simple instruments. With the development of nanotechnology, many nanomaterial (NM)-enhanced CL systems have been established in recent years and applied for the CL detection of metal ions, anions, small molecules, tumor markers, sequence-specific DNA, and RNA. This review summarizes the research progress of the nanomaterial-enhanced CL systems the past five years. These CL reactions include luminol, peroxyoxalate, lucigenin, ultraweak CL reactions, and so on. The CL mechanisms of the nanomaterial-enhanced CL systems are discussed in the first section. Nanomaterials take part in the CL reactions as the catalyst, CL emitter, energy acceptor, and reductant. Their applications are summarized in the second section. Finally, the challenges and opportunities are discussed.

Development of luminol-fluorescamine-PVP chemiluminescence system and its application to sensitive tyrosinase determination

Fluorescamine is a popular fluorescent probe. We report for the first time that luminol chemiluminescence (CL) can be enhanced by fluorescamine in the presence of PVP. The CL intensity of luminol-fluorescamine-PVP is about 26 times stronger than that of luminol. Both the removal of oxygen and the addition of superoxide dismutase (SOD) decrease CL intensity, thiourea and NaN₃ have little effect on CL intensities, indicating that O₂^•- is critical for CL. Interestingly, o-quinone generated from phenol by tyrosinase obviously inhibited the CL intensity. Inspired by such quenching effect on the luminol-fluorescamine-PVP CL system, a sensitive CL sensing for the determination of tyrosinase activity was developed. The method can detect tyrosinase in the range of 0.07-1.5 μg mL^-1 (0.19-4.02 U mL^-1) with the detection limit of 0.035 μg mL^-1 (0.094 U mL^-1). Moreover, this method exhibits satisfied recoveries for the spiked human serum samples.

Cationic liposome-triggered luminol chemiluminescence reaction and its applications

Liposomes are spherical phospholipid bilayer vesicles. In the present study, we found that cationic liposomes made by (2,3-dioleoyloxy-propyl)-trimethylammonium (DOTAP) could enhance the luminol-H₂O₂ chemiluminescence (CL) reaction. Mechanism studies showed that the positive charge on the surface of liposomes plays an important role in the CL process. We speculated that the cationic liposomes with quaternary ammonium groups on the surface may be capable of catalyzing the decomposition of H₂O₂ leading to the formation of oxygen-related free radicals including ˙OH, ¹O₂, and O₂˙^-. The luminol anions tend to move close to the surface of the cationic liposomes and then to be oxidized by the oxidizing radical species which may be around the surface of cationic liposomes forming excited-state 3-aminophthalate* (3-APA*). When the 3-APA* returns to the ground state, an enhanced CL is observed. In addition, the single-strand DNA (ssDNA) showed a significant inhibition effect on the proposed CL reaction. The CL intensity decreased linearly with an increasing amount of DNA from 0.05 to 2 pmol. We assumed that the binding of ssDNA with cationic liposomes would neutralize the positive charge on the surface of liposomes and inhibit the catalytic activity of DOTAP cationic liposomes. Based on the ssDNA-inhibited luminol-H₂O₂-cationic liposome CL reaction, simple label-free CL sensing platforms were developed for the detection of sequence-specific DNA related to the hepatitis B virus (HBV) gene and for the detection of ATP (as a model analyte) using an anti-ATP aptamer as the recognition element.