Layer-by-layer zwitterionic modification of diverse substrates with durable anti-corrosion and anti-fouling properties

Alginate-modified ZnO anti-planktonic and anti-biofilm nanoparticles for infected wound healing

Bacterial infections is one of the main factors delaying the wound healing, which has become a serious challenge for healthcare systems. Zinc oxide nanoparticles (ZnO NPs), which show broad-spectrum and excellent antibacterial activity, tend to aggregate easily and therefore hardly penetrate into bacterial biofilms, showing limited anti-biofilm properties. Herein，alginate (ALG) modified ZnO NPs (ZnO@ALG) were prepared via the combination of mussel-inspired method and "thiol-Michael" click reaction, which showed excellent dispersion and biocompatibility. Besides, the interactions between ZnO@ALG and bacteria was much better than that of ZnO NPs, and makes the bacteria produced more reactive oxygen species (ROS) than bare ZnO NPs. The anti-planktonic activity of ZnO@ALG (250 μg/mL) could reach almost 100 %, which was 2-3 times higher than that of bare ZnO NPs. In addition, the ZnO@ALG could significantly accelerate the healing of S. aureus infected wounds, and the wound healing rate of ZnO@ALG group was about 79.2 %, which was significantly higher than that of ZnO NPs (~65.8 %). This study demonstrates that the ZnO@ALG holds a great potential in the anti-planktonic and anti-biofilm fields, and the ALG-modification method can be an effective strategy to enhance the antibacterial properties of nanomaterials.

Bioinspired Dopamine and N-Oxide-Based Zwitterionic Polymer Brushes for Fouling Resistance Surfaces

Biofouling is a great challenge for engineering material in medical-, marine-, and pharmaceutical-related applications. In this study, a novel trimethylamine N-oxide (TMAO)-analog monomer, 3-(2-methylacrylamido)-N,N-dimethylpropylamine N-oxide (MADMPAO), was synthesized and applied for the grafting of poly(MADMPAO) (pMPAO) brushes on quartz crystal microbalance (QCM) chips by the combination of bio-inspired poly-dopamine (pDA) and surface-initiated atom transfer radical polymerization technology. The result of ion adsorption exhibited that a sequential pDA and pMPAO arrangement from the chip surface had different characteristics from a simple pDA layer. Ion adsorption on pMPAO-grafted chips was greatly inhibited at low salt concentrations of 1 and 10 mmol/L due to strong surface hydration in the presence of charged N+ and O- of zwitterionic pMPAO brushes on the outer layer on the chip surface, well known as the "anti-polyelectrolyte" effect. During BSA adsorption, pMPAO grafting also led to a marked decrease in frequency shift, indicating great inhibition of protein adsorption. It was attributed to weaker BSA-pMPAO interaction. In this study, the Au@pDA-4-pMPAO chip with the highest coating concentration of DA kept stable dissipation in BSA adsorption, signifying that the chip had a good antifouling property. The research provided a novel monomer for zwitterionic polymer and demonstrated the potential of pMPAO brushes in the development and modification of antifouling materials.

Medical Device-Associated Biofilm Infections and Multidrug-Resistant Pathogens

Medical devices such as venous catheters (VCs) and urinary catheters (UCs) are widely used in the hospital setting. However, the implantation of these devices is often accompanied by complications. About 60 to 70% of nosocomial infections (NIs) are linked to biofilms. The main complication is the ability of microorganisms to adhere to surfaces and form biofilms which protect them and help them to persist in the host. Indeed, by crossing the skin barrier, the insertion of VC inevitably allows skin flora or accidental environmental contaminants to access the underlying tissues and cause fatal complications like bloodstream infections (BSIs). In fact, 80,000 central venous catheters-BSIs (CVC-BSIs)-mainly occur in intensive care units (ICUs) with a death rate of 12 to 25%. Similarly, catheter-associated urinary tract infections (CA-UTIs) are the most commonlyhospital-acquired infections (HAIs) worldwide.These infections represent up to 40% of NIs.In this review, we present a summary of biofilm formation steps. We provide an overview of two main and important infections in clinical settings linked to medical devices, namely the catheter-asociated bloodstream infections (CA-BSIs) and catheter-associated urinary tract infections (CA-UTIs), and highlight also the most multidrug resistant bacteria implicated in these infections. Furthermore, we draw attention toseveral useful prevention strategies, and advanced antimicrobial and antifouling approaches developed to reduce bacterial colonization on catheter surfaces and the incidence of the catheter-related infections.

Surface-enhanced Raman spectroscopy for studying the interaction of organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v) with the biofilm of Escherichia coli

Escherichia coli biofilms are a major cause of gastrointestinal tract diseases, such as esophageal, stomach and intestinal diseases. Nowadays, these are the most commonly occurring diseases caused by consuming contaminated food. In this study, we evaluated the efficacy of probiotics in controlling multidrug-resistant E. coli and reducing its ability to form biofilms. Our results substantiate the effective use of probiotics as antimicrobial alternatives and to eradicate biofilms formed by multidrug-resistant E. coli. In this research, surface enhanced Raman spectroscopy (SERS) was utilized to identify and evaluate Escherichia coli biofilms and their response to the varying concentrations of the organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v). Given the escalating challenge of antibiotic resistance in bacteria that form biofilms, understanding the impact of potential antibiotic agents is crucial for the healthcare sector. The combination of SERS with principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) enabled the detection and characterization of the biofilm, providing insights into the biochemical changes induced by the antibiotic candidate. The identified SERS spectral features served as indicators for elucidating the mode of action of the potential drug on the biofilm. Through PCA and PLS-DA, metabolic variations allowing the differentiation and classification of unexposed biofilms and biofilms exposed to different concentrations of the synthesized antibiotic were successfully identified, with 95% specificity, 96% sensitivity, and a 0.75 area under the curve (AUC). This research underscores the efficiency of surface enhanced Raman spectroscopy in differentiating the impact of potential antibiotic agents on E. coli biofilms.

Bioinspired, Anticoagulative, 19 F MRI-Visualizable Bilayer Hydrogel Tubes as High Patency Small-Diameter Vascular Grafts

The clinical patency of small-diameter vascular grafts (SDVGs) (ID < 6 mm) is limited, with the formation of mural thrombi being a major threat of this limitation. Herein, a bilayered hydrogel tube based on the essential structure of native blood vessels is developed by optimizing the relation between vascular functions and the molecular structure of hydrogels. The inner layer of the SDVGs comprises a zwitterionic fluorinated hydrogel, avoiding the formation of thromboinflammation-induced mural thrombi. Furthermore, the position and morphology of the SDVGs can be visualized via 19 F/1 H magnetic resonance imaging. The outer poly(N-acryloyl glycinamide) hydrogel layer of SDVGs provides matched mechanical properties with native blood vessels through the multiple and controllable intermolecular hydrogen-bond interactions, which can withstand the accelerated fatigue test under pulsatile radial pressure for 380 million cycles (equal to a service life of 10 years in vivo). Consequently, the SDVGs exhibit higher patency (100%) and more stable morphology following porcine carotid artery transplantation for 9 months and rabbit carotid artery transplantation for 3 months. Therefore, such a bioinspired, antithrombotic, and visualizable SDVG presents a promising design approach for long-term patency products and great potential of helping patients with cardiovascular diseases.

Zwitterionic hydrogel-coated heart valves with improved endothelialization and anti-calcification properties

Valve replacement surgery is the golden standard for end-stage valvular disease due to the lack of self-repair ability. Currently, bioprosthetic heart valves (BHVs) crosslinked by glutaraldehyde (GA) have been the most popular choice in clinic, especially after the emerge of transcatheter aortic valve replacement (TAVR). Nevertheless, the lifespan of BHVs is limited due to severe calcification and deterioration. In this study, to improve the anti-calcification property of BHVs, decellularized heart valves were modified by methacrylic anhydride to introduce double bonds (MADHVs), and a hybrid hydrogel made of sulfobetaine methacrylate (SBMA) and methacrylated hyaluronic acid (MAHA) was then coated onto the surface of MADHVs. Followed by grafting of Arg-Glu-Asp-Val (REDV), an endothelial cell-affinity peptide, the BHVs with improved affinity to endothelial cell (SMHVs-REDV) was obtained. SMHVs-REDV exhibited excellent collagen stability, reliable mechanical property and superior hemocompatibility. Moreover, enhanced biocompatibility and endothelialization potential compared with GA-crosslinked BHVs were achieved. After subcutaneous implantation for 30 days, SMHVs-REDV showed significantly reduced immune response and calcification compared with GA-crosslinked BHVs. Overall, simultaneous endothelialization and anti-calcification can be realized by this strategy, which was supposed to be benefit for improving the main drawbacks for available commercial BHVs products.

Hydrophilic polymer-based anti-biofouling coatings: Preparation, mechanism, and durability

Anti-biofouling materials that combat microorganism attachment have been intensively studied due to the ever-growing demand on smart and durable coatings. Although various hydrophilic polymer surfaces demonstrated superior anti-biofouling properties, their practical application was hampered by the undesired mechanical vulnerability and complicated fabrication process. In this review, we summarized the mechanically and chemically robust anti-biofouling coatings into six strategies namely (i) 3D-grafted coatings, (ii) hierarchical spheres-based coatings, (iii) inorganic nanomaterials-reinforced coatings, (iv) hydrolysis-based coating, (v) semi-interpenetrating structure-based coatings, and (vi) layer-by-layer (LbL) assembled coatings. The anti-biofouling efficacy and durability of these coatings over a series of challenges were also comprehensively presented. The purpose of this review is to inspire researchers to develop novel anti-biofouling coatings for future practical applications.

Zwitterionic Polymer-Grafted Superhydrophilic and Superoleophobic Silk Fabrics for Anti-Oil Applications

A highly anti-oil fabric membrane is synthesized by surface grafting of zwitterionic poly(sulfobetaine methacrylate) (PSBMA) onto the fabric surface. The fabric membrane is first enzymatically modified to create more reactive amine groups on the surface. A surface-initiated atom transfer radical polymerization (SI-ATRP) reaction is then performed to modify the fabric membrane surface with a dense PSBMA brush layer. Surface characterization indicates that the brush-grafted fabric membrane exhibits increased surface roughness and improved superhydrophilicity. The PSBMA-modified silk fabrics show a very large contact angle for oil droplets in water, and have excellent oil resistance in air and in water-oil mixtures.

Perfect Combination of LBL with Sol-Gel Film to Enhance the Anticorrosion Performance on Al Alloy under Simulated and Accelerated Corrosive Environment

Given their outstanding versatile properties, multilayered anticorrosion coatings have drawn great interest from researchers in the academic and engineering fields. However, the application of multilayered coatings is restricted by some limitations such as low interlayer compatibilities, the harsh preparation process, etc. This work introduced a composite film fabricated on a 2A12 aluminum alloy surface, including an anodic oxide film, a sol–gel film, and a layer-by-layer (LBL) self-assembling film from bottom to top. The microstructure and elemental characterization indicated that the finish of the coating with the LBL film resulted in a closely connected multilayered coating with a smoother surface. The anticorrosion performance was systematically evaluated in the simulated corrosive medium and neutral salt spray environment. The integrated coating with the LBL film presented an excellent anticorrosion ability with system impedance over 10⁸ Ω·cm² and a self-corrosion current density two orders of magnitude lower than that of the other coatings. After the acceleration test in a salt spray environment, the multilayered coatings could still show a good protective performance with almost no cracks and no penetration of chloride ions. It is believed that the as-constructed multilayered coating with high corrosive properties and a fine surface state will have promising applications in the field of anticorrosion engineering.