Antibacterial activity of an NIR-induced Zn ion release film

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

A Near-Infrared Photothermal-Responsive Underwater Adhesive with Tough Adhesion and Antibacterial Properties

Developing tunable underwater adhesives that possess tough adhesion in service and easy detachment when required remains challenging. Herein, a strategy is proposed to design a near infrared (NIR) photothermal-responsive underwater adhesive by incorporating MXene (Ti3 C2 Tx )-based nanoparticles within isocyanate-modified polydimethylsiloxane (PDMS) polymer chains. The developed adhesive exhibits long-term and tough adhesion with an underwater adhesion strength reaching 5.478 MPa. Such strong adhesion is mainly attributed to the covalent bonds and hydrogen bonds at the adhesive-substrate interface. By making use of the photothermal-response of MXene-based nanoparticles and the thermal response of PDMS-based chains, the adhesive possesses photothermal-responsive performance, exhibiting sharply diminished adhesion under NIR irradiation. Such NIR-triggered tunable adhesion allows for easy and active detachment of the adhesive when needed. Moreover, the underwater adhesive exhibits photothermal antibacterial property, making it highly desirable for underwater applications. This work enhances the understanding of photothermal-responsive underwater adhesion, enabling the design of tunable underwater adhesives for biomedical and engineering applications.

Enhanced Antibacterial Ability of Electrospun PCL Scaffolds Incorporating ZnO Nanowires

The infection of implanted biomaterial scaffolds presents a major challenge. Existing therapeutic solutions, such as antibiotic treatment and silver nanoparticle-containing scaffolds are becoming increasingly impractical because of the growth of antibiotic resistance and the toxicity of silver nanoparticles. We present here a novel concept to overcome these limitations, an electrospun polycaprolactone (PCL) scaffold functionalised with zinc oxide nanowires (ZnO NWs). This study assessed the antibacterial capabilities and biocompatibility of PCL/ZnO scaffolds. The fabricated scaffolds were characterised by SEM and EDX, which showed that the ZnO NWs were successfully incorporated and distributed in the electrospun PCL scaffolds. The antibacterial properties were investigated by co-culturing PCL/ZnO scaffolds with Staphylococcus aureus. Bacterial colonisation was reduced to 51.3% compared to a PCL-only scaffold. The biocompatibility of the PCL/ZnO scaffolds was assessed by culturing them with HaCaT cells. The PCL scaffolds exhibited no changes in cell metabolic activity with the addition of the ZnO nanowires. The antibacterial and biocompatibility properties make PCL/ZnO a good choice for implanted scaffolds, and this work lays a foundation for ZnO NWs-infused PCL scaffolds in the potential clinical application of tissue engineering.

Preparation of metal-organic framework combined with Portulaca oleracea L. extract electrostatically spun nanofiber membranes delayed release wound dressing

In this study, we prepared a polyacrylonitrile (PAN) composite nanofiber membrane comprising Portulaca oleracea L. extract (POE) and a zinc-based metal-organic framework (MOF) by an in situ growth method as a potentially new type of wound dressing with a slow drug-release effect, to solve the problem of the burst release of drugs in wound dressings. The effects of the MOF and POE doping on the nanofiber membranes were examined using scanning electron microscopy (SEM) and FTIR spectroscopy. SEM analysis revealed the dense and uniform attachment of MOF particles to the surface of the nanofiber membrane, while FTIR spectroscopy confirmed the successful fusion of MOF and POE. Furthermore, investigations into the water contact angle and swelling property demonstrated that the incorporation of the MOF and POE enhanced the hydrophilicity of the material. The results of the in vitro release test showed that the cumulative release rate for PAN/MOF/POE60 decreased from 66.5 ± 2.34% to 32.18 ± 1.31% in the initial 4 h and from 90.54 ± 0.79% to 65.92 ± 1.95% in 72 h compared to PAN/POE, indicating a slowing down of the drug release. In addition, the antimicrobial properties of the fiber membranes were evaluated by the disc diffusion method, and it was evident that the PAN/MOF/POE nanofibers exhibited strong inhibition against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The antioxidant properties of the nanofiber membranes loaded with POE were further validated through the DPPH radical scavenging test. These findings highlight the potential application of the developed nanofiber membranes in wound dressings, offering controlled and sustained drug-release capabilities.

Bio-adhesive and ROS-scavenging hydrogel microspheres for targeted ulcerative colitis therapy

Ulcerative colitis (UC) as an important type of inflammatory bowel disease is a chronic disease characterized by intestinal dyshomeostasis. The UC treatment is challenged by the insufficiency of drug delivery and retention. Herein, we fabricated an intrarectal formulation of olsalazine (Olsa)-loaded hydrogel microspheres (LDKT/Olsa) with good bio-adhesiveness and reactive oxygen species (ROS)-scavenging ability to enhance drug retention and therapeutic effect. Low methoxy pectin-dopamine conjugate/konjac glucomannan composite hydrogel microspheres (LDKT) with a size ranging from 10 to 100 μm were prepared by using Zn²⁺ and ROS-sensitive thioketal as crosslinkers. Upon intrarectal administration, the negatively charged and dopamine-functionalized hydrogel microspheres efficiently adhered to cationic surface of inflammatory mucosa, scavenging ROS and releasing Zn²⁺ and Olsa for antibacterial and anti-inflammatory effects. In the dextran sodium sulfate (DSS)-induced mouse UC model, the microspheres significantly reduced the levels of colonic ROS and pro-inflammatory cytokines, improved gut mucosal barrier integrity, and remarkably relieved colitis. Overall, the LDKT microspheres are promising carriers to deliver drugs for UC treatment.

When Iodine Meets Starch: On-Demand Generation of Photothermal Hydrogels for Mild-Temperature Photothermal-Chemo Disinfection

As an emerging antibacterial strategy, photothermal disinfection attracts increasing attention due to its advantages of high efficacy, wide pertinence, and non-drug resistance. However, the unavoidable shielding of observation by photothermal components and the possible damage to normal tissue caused by hyperthermia restrict its applications. Herein, we propose a composite hydrogel with the ability of on-demand generation of photothermal components and mild-temperature photothermal disinfection by elegantly tuning the binding and release of iodine and starch. The composite hydrogel is obtained by blending iodine-adsorbed pH-responsive ZIF-8 nanoparticles (NPs) with a starch-based hydrogel matrix. Through a convenient pH response, the composite hydrogel leverages the triple functions of iodine, which serves as a disinfectant and reacts with starch to generate a photothermal agent and color indicator, allowing photothermal-chemotherapy combined disinfection on demand. In vitro antibacterial experiments show that the composite hydrogel can respond to the acidification of the microenvironment caused by bacterial metabolism and produce corresponding color changes, realizing naked-eye observation. Meanwhile, under the combined treatment of heating/I2/Zn2+, the composite hydrogel can completely kill Escherichia coli and Staphylococcus aureus at a mild temperature of ∼41 °C. This study represents a breakthrough in on-demand generation of photothermal hydrogels for mild-temperature photothermal disinfection.

Application of bioactive metal ions in the treatment of bone defects

The treatment of bone defects is an important problem in clinical practice. The rapid development of bone tissue engineering (BTE) may provide a new method for bone defect treatment. Metal ions have been widely studied in BTE and demonstrated a significant effect in promoting bone tissue growth. Different metal ions can be used to treat bone defects according to specific conditions, including promoting osteogenic activity, inhibiting osteoclast activity, promoting vascular growth, and exerting certain antibacterial effects. Multiple studies have confirmed that metal ions-modified composite scaffolds can effectively promote bone defect healing. By studying current extensive research on metal ions in the treatment of bone defects, this paper reviews the mechanism of metal ions in promoting bone tissue growth, analyzes the loading mode of metal ions, and lists some specific applications of metal ions in different types of bone defects. Finally, this paper summarizes the advantages and disadvantages of metal ions and analyzes the future research trend of metal ions in BTE. This article can provide some new strategies and methods for future research and applications of metal ions in the treatment of bone defects.

Dually-Thermoresponsive Hydrogel with Shape Adaptability and Synergetic Bacterial Elimination in the Full Course of Wound Healing

Incomplete contact between a pre-formed hydrogel and irregular wound limits the therapeutic effect of the dressing and increases the risk of infection; while great concerns have remained regarding the potential toxicity of the residual additives of chemical crosslinking for in situ forming hydrogels. Therefore, it is desirable to develop a self-adaptive hydrogel in response to skin temperature with shape adaptability and efficient antibacterial properties to prevent microbial invasion. Herein, a dually-thermoresponsive hydrogel composed of poly(N-isopropylacrylamide) (PNIPAm) and methacrylated κ-carrageenan (MA-κ-CA) is designed with compliance at physiological temperature to realize shape adaptability for completely covering irregular wounds. Furthermore, the hydrogel with near-infrared (NIR)-responsive polypyrrole-polydopamine nanoparticles (PPy-PDA NPs) and Zn²⁺ -derived zeolitic imidazolate framework (ZIF-8) can generate localized heat and gradually release Zn²⁺ to realize safe, effective synergetic photothermal-chemical bactericidal capability. In addition, the release rate of Zn²⁺ can be accelerated by NIR-induced heating, and thus a more efficient sterilization can be provided to severely infected wounds. Therefore, the proposed hydrogel would serve as a promising wound dressing for the full course of wound healing, with the abilities of perfectly covering the wound and adapting to regenerating tissue, and controllable photothermal-chemical antibacterial capability to reach high bactericidal efficiency and long-term release of antibacterial agents.

Metal-based nano-delivery platform for treating bone disease and regeneration

Owing to their excellent characteristics, such as large specific surface area, favorable biosafety, and versatile application, nanomaterials have attracted significant attention in biomedical applications. Among them, metal-based nanomaterials containing various metal elements exhibit significant bone tissue regeneration potential, unique antibacterial properties, and advanced drug delivery functions, thus becoming crucial development platforms for bone tissue engineering and drug therapy for orthopedic diseases. Herein, metal-based drug-loaded nanomaterial platforms are classified and introduced, and the achievable drug-loading methods are comprehensively generalized. Furthermore, their applications in bone tissue engineering, osteoarthritis, orthopedic implant infection, bone tumor, and joint lubrication are reviewed in detail. Finally, the merits and demerits of the current metal-based drug-loaded nanomaterial platforms are critically discussed, and the challenges faced to realize their future applications are summarized.

Multi-functional wound dressings based on silicate bioactive materials

Most traditional wound dressings passively offer a protective barrier for the wounds, which lacks the initiative in stimulating tissue regeneration. In addition, cutaneous wound healing is usually accompanied by various complicated conditions, including bacterial infection, skin cancer, and damaged skin appendages, bringing further challenges for wound management in clinic. Therefore, an ideal wound dressing should not only actively stimulate wound healing but also hold multi-functions for solving problems associated with different specific wound conditions. Recent studies have demonstrated that silicate bioceramics and bioglasses are one type of promising materials for the development of wound dressings, as they can actively accelerate wound healing by regulating endothelial cells, dermal fibroblasts, macrophages, and epidermal cells. In particular, silicate-based biomaterials can be further functionalized by specific structural design or doping with functional components, which endow materials with enhanced bioactivities or expanded physicochemical properties such as photothermal, photodynamic, chemodynamic, or imaging properties. The functionalized materials can be used to address wound healing with different demands including but not limited to antibacterial, anticancer, skin appendages regeneration, and wound monitoring. In this review, we summarized the current research on the development of silicate-based multi-functional wound dressings and prospected the development of advanced wound dressings in the future.

Advances and Potentials of Polydopamine Nanosystem in Photothermal-Based Antibacterial Infection Therapies

Bacterial infection remains one of the most dangerous threats to human health due to the increasing cases of bacterial resistance, which is caused by the extensive use of current antibiotics. Photothermal therapy (PTT) is similar to photodynamic therapy (PDT), but PTT can generate heat energy under the excitation of light of specific wavelength, resulting in overheating and damage to target cells or sites. Polydopamine (PDA) has been proved to show plenty of advantages, such as simple preparation, good photothermal conversion effects, high biocompatibility, and easy functionalization and adhesion. Taking these advantages, dopamine is widely used to synthesize the PDA nanosystem with excellent photothermal effects, good biocompatibility, and high drug loading ability, which therefore play more and more important roles for anticancer and antibacterial treatment. PDA nanosystem-mediated PTT has been reported to induce significant tumor inhibition, as well as bacterial killings due to PTT-induced hyperthermia. Moreover, combined with other cancer or bacterial inhibition strategies, PDA nanosystem-mediated PTT can achieve more effective tumor and bacterial inhibitions. In this review, we summarized the progress of preparation methods for the PDA nanosystem, followed by advances of their biological functions and mechanisms for PTT uses, especially in the field of antibacterial treatments. We also provided advances on how to combine PDA nanosystem-mediated PTT with other antibacterial methods for synergistic bacterial killings. Moreover, we further provide some prospects of PDA nanosystem-mediated PTT against intracellular bacteria, which might be helpful to facilitate their future research progress for antibacterial therapy.

Biomedical Implants with Charge-Transfer Monitoring and Regulating Abilities

Transmembrane charge (ion/electron) transfer is essential for maintaining cellular homeostasis and is involved in many biological processes, from protein synthesis to embryonic development in organisms. Designing implant devices that can detect or regulate cellular transmembrane charge transfer is expected to sense and modulate the behaviors of host cells and tissues. Thus, charge transfer can be regarded as a bridge connecting living systems and human-made implantable devices. This review describes the mode and mechanism of charge transfer between organisms and nonliving materials, and summarizes the strategies to endow implants with charge-transfer regulating or monitoring abilities. Furthermore, three major charge-transfer controlling systems, including wired, self-activated, and stimuli-responsive biomedical implants, as well as the design principles and pivotal materials are systematically elaborated. The clinical challenges and the prospects for future development of these implant devices are also discussed.

The recent progress on metal-organic frameworks for phototherapy

Some infectious or malignant diseases such as cancers are seriously threatening the health of human beings all over the world. The commonly used antibiotic therapy cannot effectively treat these diseases within a short time, and also bring about adverse effects such as drug resistance and immune system damage during long-term systemic treatment. Phototherapy is an emerging antibiotic-free strategy to treat these diseases. Upon light irradiation, phototherapeutic agents can generate cytotoxic reactive oxygen species (ROS) or induce a temperature increase, which leads to the death of targeted cells. These two kinds of killing strategies are referred to as photodynamic therapy (PDT) and photothermal therapy (PTT), respectively. So far, many photo-responsive agents have been developed. Among them, the metal-organic framework (MOF) is becoming one of the most promising photo-responsive materials because its structure and chemical compositions can be easily modulated to achieve specific functions. MOFs can have intrinsic photodynamic or photothermal ability under the rational design of MOF construction, or serve as the carrier of therapeutic agents, owing to its tunable porosity. MOFs also provide feasibility for various combined therapies and targeting methods, which improves the efficiency of phototherapy. In this review, we firstly investigated the principles of phototherapy, and comprehensively summarized recent advances of MOF in PDT, PTT and synergistic therapy, from construction to modification. We expect that our demonstration will shed light on the future development of this field, and bring it one step closer to clinical trials.

The recent progress in photothermal-triggered bacterial eradication

Increasing evidence suggested that bacterial infection diseases posed a great threat to human health and became the leading cause of mortality. However, the abuse of antibiotics and their residues in the environment result in the emergence and prevalence of drug-resistant bacteria. Photothermal therapy (PTT) has received considerable attention owing to its noninvasiveness, and proved to be promising in preventing bacterial infection diseases. In this review, we first surveyed the recent progress of PTT-based responsive targeting strategies for bacterial killing. We then highlighted the PTT-based smart designs of bio-films, hydrogels and synergistic methods for treating bacterial infections. Existing challenges and perspectives are also discussed to inspire the future development of a PTT-based platform for the efficient therapy of bacterial infections.

Regulation of Ce (Ⅲ) / Ce (Ⅳ) ratio of cerium oxide for antibacterial application

Antibiotics have been considered as effective weapons against bacterial infections since they were discovered. However, antibiotic resistance caused by overuse and abuse of antibiotics is an emerging public health threat nowadays. Fully defeating bacterial infections has become a tough challenge. In this work, cerium oxide was fabricated on medical titanium by thermolysis of cerium-containing metal-organic framework (Ce-BTC). Regulation of Ce (Ⅲ)/Ce (Ⅳ) ratios was realized by pyrolysis of Ce-BTC in different gas environment, and the antibacterial properties were studied. The results indicated that, in acidic conditions, ceria with a high Ce (Ⅲ)/Ce (Ⅳ) ratio owned high oxidase-like activity which could produce reactive oxygen species. Moreover, ceria with high Ce (Ⅲ) content possessed strong ATP deprivation capacity which could cut off the energy supply of bacteria. Based on this, ceria with a high Ce (Ⅲ)/Ce (Ⅳ) ratio exhibited superior antibacterial activity

•

Cerium oxide films were fabricated on the titanium surface by pyrolysis of Ce-BTC

•

The valence states of cerium element on cerium oxide can be modulated flexibly

•

CeO_2-X with high Ce (Ⅲ)/Ce (Ⅳ) ratio possessed high antibacterial rate

•

Antibacterial rate is related to the oxidase-like and ATP deprivation capacity

Plasmonically Modulated Gold Nanostructures for Photothermal Ablation of Bacteria

With the wide utilization of antibiotics, antibiotic-resistant bacteria have been often developed more frequently to cause potential global catastrophic consequences. Emerging photothermal ablation has been attracting extensive research interest for quick/effective eradication of pathogenic bacteria from contaminated surroundings and infected body. In this field, anisotropic gold nanostructures with tunable size/morphologies have been demonstrated to exhibit their outstanding photothermal performance through strong plasmonic absorption of near-infrared (NIR) light, efficient light to heat conversion, and easy surface modification for targeting bacteria. To this end, this review first introduces thermal treatment of infectious diseases followed by photothermal therapy via heat generation on NIR-absorbing gold nanostructures. Then, the usual synthesis and spectral features of diversified gold nanostructures and composites are systematically overviewed with the emphasis on the importance of size, shape, and composition to achieve strong plasmonic absorption in NIR region. Further, the innovated photothermal applications of gold nanostructures are comprehensively demonstrated to combat against bacterial infections, and some constructive suggestions are also discussed to improve photothermal technologies for practical applications.

Emerging photothermal-derived multimodal synergistic therapy in combating bacterial infections

Due to the emerging bacterial resistance and the protection of tenacious biofilms, it is hard for the single antibacterial modality to achieve satisfactory therapeutic effects nowadays. In recent years, photothermal therapy (PTT)-derived multimodal synergistic treatments have received wide attention and exhibited cooperatively enhanced bactericidal activity. PTT features spatiotemporally controllable generation of hyperthermia that could eradicate bacteria without inducing resistance. The synergy of it with other treatments, such as chemotherapy, photo-dynamic/catalytic therapy (PDT/PCT), immunotherapy, and sonodynamic therapy (SDT), could lower the introduced laser density in PTT and avoid undesired overheating injury of normal tissues. Simultaneously, by heat-induced improvement of the bacterial membrane permeability, PTT is conducive for accelerated intracellular permeation of chemotherapeutic drugs as well as reactive oxygen species (ROS) generated by photosensitizers/sonosensitizers, and could promote infiltration of immune cells. Thereby, it could solve the currently existing sterilization deficiencies of other combined therapeutic modes, for example, bacterial resistance for chemotherapy, low drug permeability for PDT/PCT/SDT, adverse immunoreactions for immunotherapy, etc. Admittedly, PTT-derived synergistic treatments are becoming essential in fighting bacterial infection, especially those caused by antibiotic-resistant strains. This review firstly presents the classical and newly reported photothermal agents (PTAs) in brief. Profoundly, through the introduction of delicately designed nanocomposite platforms, we systematically discuss the versatile photothermal-derived multimodal synergistic therapy with the purpose of sterilization application. At the end, challenges to PTT-derived combinational therapy are presented and promising synergistic bactericidal prospects are anticipated.

Extreme Temperature-Tolerant Conductive Gel with Antibacterial Activity for Flexible Dual-Response Sensors

Flexible sensors based on conductive hydrogel show great potential in electronic skin and human-machine interface. However, pure water in hydrogel inevitably freezes or rapidly evaporates under extreme temperatures, leading to inadequate fulfillment of sensor performances. Herein, a well-designed strategy is reported for fabricating extreme temperature-tolerant gel-based sensors. By immersing a gelatin/polyacrylamide (PAAm)-clay composite (GC) hydrogel into a ZnCl₂/water/glycerol system, a phase-transition-tunable gel (PTTGC gel) is obtained with outstanding antifreezing (-82 °C) and long-lasting moisture (70 °C, more than 40 days) properties. Meanwhile, the gel also presents good antibacterial activity and biocompatibility attributing to Zn²⁺ and gelatin, respectively. Then, a dual-response sensor with a wide operating temperature (-60 to 60 °C) is proposed, presenting high stress and temperature sensitivities and long-term stability. The sensor will meet the needs of the human-machine interface for scientific investigation and data monitoring in polar, desert, etc.