A lipophilic ionic liquid-based dye for anion optodes: importance of dye lipophilicity and application to heparin measurement

Fundamental investigation on fluorous nanoemulsion optodes: effect of matrix fluorination on selectivity

As fundamental investigation on fluorous nanoemulsion (NE) optodes for highly selective perfluorooctanesulfonate (PFOS-) sensing, the effect of matrix fluorination on selectivity was investigated. Due to the high hydrophobicity of PFOS- itself, it responded in exhaustive mode regardless of the fluorination ratio of the matrix, and the lowest detectable PFOS- concentration was on the order of 10-7 to 10-6 M. On the other hand, the response of non-fluorous interfering anions was suppressed as the fluorination ratio of the matrix increased. It was revealed that the relative selectivity of PFOS- for hydrophobic anions, ClO4-, SCN-, and 1-octanesulfonate (OS-) was improved by more than one order of magnitude, up to nearly two orders of magnitude, and that it was also improved by less than one order of magnitude for hydrophilic anions, Br-, Cl-, and SO4-, in logarithmic selectivity coefficient (log K PFOS - , j opt ).

Nanoemulsion-based silver ion-selective optode based on colorimetrically silver ion-responsive ionic liquid-based dye

In this study, we describe the fast-responsive nanoemulsion (NE)-based silver ion (Ag⁺)-selective optode based on colorimetrically silver ion-responsive ionic liquid-based dye (ILD). The ILD comprises purely functional sensing molecules, a protonated cationic merocyanine dye (KD-M13-H⁺) and an anionic Ag⁺ ionophore (BDM-SO₃^-), and thus, it can be used for highly sensitive silver ion (Ag⁺) sensing due to the extremely high content of dye in the organic phase (ionic-liquid phase). However, during the Ag⁺ sensing, the cationic merocyanine dye is converted into electrically neutral form by deprotonation of the dye, which leads to the conversion of liquified dye into solid form in the organic phase, which makes the response time slower when ILD is used for poly(vinyl chloride) (PVC) membrane-based ion-selective optode, especially for sensing of high Ag⁺ concentration. To solve this problem, we focused on the use of the nano-emulsification technique. The response time of the ILD-based nanoemulsion (NE) was considerably shorter (1 s) compared to that of the ILD-based PVC membrane (a few minutes) owing to the large surface area and excellent diffusivity of the emulsion. The ILD-based NE contained a very high dye concentration (833 mmol kg^-1) and exhibited approximately 12 times higher sensitivity than that of the plasticizer-based conventional NE. In the cation measurements, the ILD-based NE responded to Ag⁺ via a cation-exchange mechanism and demonstrated a highly selective response to Ag⁺ (log [Formula: see text] = - 3.0). ILD-NE was successfully applied to the detection of spiked Ag⁺ in a tap water sample with recoveries of 98 - 103% with a relative standard deviation (RSD) of less than 5%. In comparison with NE based on non-ionic ionophores without charge, NE based on BDM-SO₃^- responded to lower Ag⁺ concentrations owing to the effect of negative charge on the binding property. The novel ILD-based NE was capable of highly sensitive, rapid, and selective Ag⁺ sensing, providing potential for analytical devices applicable to high-performance on-site analysis.

Response Mechanism of Hyperpolarization-Based Polyion Nanosensors

The last decade has witnessed a rapid development of nano- and microparticle-based optical ion sensors, including ion-selective optodes (ISOs). While the application of nano-ISOs has shown promising performance for sensing inorganic ions, polyion sensing using nanoscale ISOs has encountered significant interference in complex samples such as blood plasma. Recently, we have reported on a new polyion sensing principle that operates through a novel mechanism to overcome this challenge. The new sensing mechanism showed improved characteristics not observed with conventional ion-exchange type sensors, but the precise mechanism of operation remained thus far unclear. This paper aims to clarify how protamine, the arginine-rich target polycation, behaves during optical signal transduction to give dramatically improved selectivity. Based on thermodynamic data, sensor performance and ζ-potential analysis, two discrete phases of protamine extraction are identified. Initially, protamine extracts into the bulk nanosensor phase, a process that is concurrent with the optical signal change. This is then followed by protamine accumulation onto the nanosensor surface, which starts only upon saturation of the optical signal change. The data indicate that the improved selectivity is due to the inability of small ions to form a sufficiently strong interaction with an active sensing ingredient, DNNS^-. Any exchange of one inorganic cation for another therefore remains optically silent, suppressing matrix effects. Moreover, the recognition of protamine is shown to be an exhaustive extraction process, making the response independent of the nature and concentration of the initial small cation in the nanosensor phase.

Recent improvements to the selectivity of extraction-based optical ion sensors

Optical sensors continue to demonstrate tremendous potential across a wide range of applications due to their high versatility and low cost. This feature article will focus on a number of recent advances made in improving the performance of extraction-based optical ion sensors within our group. This includes the progress of anchored solvatochromic transduction to provide pH and sample volume independent optical responses in nanoemulsion-based sensors. A recent breakthough is in polyion sensing in biological fluids that uses a novel indirect transduction mechanism that significantly improves the selectivity of dinonylnaphthalenesulfonate-based protamine sensors and its potential applications beyond polyion sensing. The role of particle stabilizers in relation to the response of emulsified sensors is shown to be important. Current challenges in the field and possible opportunities are also discussed.

Selectivity remains a constant challenge in the development of optical extraction-based sensors. Fortunately, there are several mechanistic and compositional changes with the potential to improve selectivity without developing new ionophores.

Chloride ion-selective dye liquid nanoemulsion: improved sensor performance due to intermolecular interactions between dye and ionophore

Ionophore-based dye liquid nanoemulsion sensors exhibiting rapid response, high selectivity, and high sensitivity to chloride were developed. Intermolecular interactions within emulsion contributed to the background suppression.

Protamine/heparin optical nanosensors based on solvatochromism

Optical nanosensors for the detection of polyions, including protamine and heparin, have to date relied upon ion-exchange reactions involving an analyte and an optical transducer. Unfortunately, due to the limited selectivity of the available ionophores for polyions, this mechanism has suffered from severe interference in complex sample matrices. To date no optical polyion nanosensors have demonstrated acceptable performance in serum, plasma or blood. Herein we describe a new type of nanosensor based on our discovery of a “hyper-polarizing lipophilic phase” in which dinonylnaphthalenesulfonate (DNNS⁻) polarizes a solvatochromic dye much more than even an aqueous environment. We have found that the apparent polarity of the organic phase is only modulated when DNNS⁻ binds to large polyions such as protamine, unlike singly charged ions that lack the cooperative binding required to cause a significant shift in the distribution of the polarizing DNNS⁻ ions. Our new sensing mechanism allows solvatochromic signal transduction without the transducer undergoing ion exchange. The result is significantly improved sensitivity and selectivity, enabling for the first time the quantification of protamine and heparin in human plasma using optical nanosensors that correlates with the current gold standard analysis method, the anti-Xa factor assay.

Novel optical nanosensors for the selective detection of the polycationic protamine based on solvatochromic signal change allow one to detect heparin in plasma.

Enzyme-responsive fluorescent nanoemulsion based on lipophilic dye liquid

An enzyme-responsive fluorescent nanoemulsion (NE) based on lipophilic dye liquid (LDL) was developed for alkaline phosphatase (ALP). The response mechanism of the NE involved enzymatic reactions and simultaneous extraction of anions. The LDL-based NE exhibited 3.8 times higher sensitivity than plasticizer-based conventional NE. Detection limit and response range were 2.7 (U L-1) and 5-50 (U L-1), respectively. The response time was reduced to less than half that of the LDL-based membrane.

Lipophilic Fluorescent Dye Liquids: Förster Resonance Energy Transfer-Based Fluorescence Amplification for Ion Selective Optical Sensors Based on a Solvent Polymeric Membrane

Optical sensors based on solvent polymeric membranes have the potential to measure analytes present in an aqueous solution through the development of a tailored method for a specific target. However, limits in the concentrations of the component dyes have prevented improvements in sensitivity. We propose a Förster resonance energy transfer (FRET)-based fluorescence amplification system for ion-selective optical sensors using a highly fluorescent liquid material composed of a lipophilic phosphonium cation and a pyrene modifying sulfonate anion ([P₆₆₆₁₄][HP-SO₃]), as both the plasticizer and donor, in addition to a combination of the lipophilic phosphonium cation and the fluorescein dodecyl ester anion ([P₆₆₆₁₄][12-FL]) as the fluorescent sensing dye acceptor. For ion extraction-based sensing, the donor and acceptor were retained in the plasticized PVC membrane with negligible leaching upon exposure to acidic and basic aqueous solutions. Systematic investigation of the donor and acceptor ratios clarified the effect of the amplification factor and the sensitivity of the sensor. At an acceptor doping level of 0.5 mol % (vs donor), an approximately 22-fold higher sensitivity was obtained compared to that of a conventional PVC membrane optical sensor. During ion measurement based on the coextraction of protons and anions, selectivity following the Hofmeister order was observed, which was controlled by the addition of ionophores. The proposed FRET system based on a lipophilic fluorescent liquid material has the potential to significantly improve the sensitivities of optical sensors using solvent polymeric membranes with high selectivities for various target analytes.

A novel fluorescent probe for rapid detection of sulfur dioxide in living cells

Sulfur dioxide is one of the reactive sulfur species, which has significant physiological functions in cells. Some physiological processes are closely related to SO₂ in organisms, and the high concentration of SO₂ in living cells can cause many diseases. In order to investigate the unique function of SO₂ at the subcellular level, developing a molecular tool which could detect of SO₂ within organelles is imperative. Hence, we developed a cationic dye named HQ-SO₂ as a new fluorescent probe to specifically monitor SO₂ , which was easy to obtain through one-step reaction. It took Michael addition reaction as the mechanism of reaction for detection of SO₂ . In addition, this probe showed a series of highly favorable properties such as rapid response rate, low cytotoxicity, high selectivity, low detection limit, and good photostability, which enabled the probe to track SO₂ in living cells.

Highly sensitive optical ion sensor with ionic liquid-based colorimetric membrane/photonic crystal hybrid structure

An ionic liquid-based thin (~ 1 µm) colorimetric membrane (CM) is a key nano-tool for optical ion sensing, and a two-dimensional photonic crystal slab (PCS) is an important nano-platform for ultimate light control. For highly sensitive optical ion sensing, this report proposes a hybrid of these two optical nano-elements, namely, a CM/PCS hybrid. This structure was successfully fabricated by a simple and rapid process using nanoimprinting and spin-coating, which enabled control of the CM thickness. Optical characterization of the hybrid structure was conducted by optical measurement and simulation of the reflection spectrum, indicating that the light confined in the holes of the PCS was drastically absorbed by the CM when the spectrum overlapped with the absorption spectrum of the CM. This optical property obtained by the hybridization of CM and PCS enabled drastic improvement in the absorption sensitivity in Ca ion sensing, by ca. 78 times compared to that without PCS. Experimental and simulated investigation of the relation between the CM thickness and absorption sensitivity enhancement suggested that the controlled light in the PCS enhanced the absorption cross-section of the dye molecules within the CM based on the enhanced local density of states. This highly sensitive optical ion sensor is expected to be applied for micro-scale bio-analysis like cell-dynamics based on reflectometric Ca ion detection.