Label-free liquid crystal-based optical detection of norfloxacin using an aptamer recognition probe in soil and lake water

Norfloxacin (NOX), a broad spectrum fluoroquinolone (FQ) antibiotic, is commonly detected in environmental residues, potentially contributing to biological drug resistance. In this paper, an aptamer recognition probe has been used to develop a label-free liquid crystal-based biosensor for simple and robust optical detection of NOX in aqueous solutions. Stimuli-receptive liquid crystals (LCs) have been employed to report aptamer-target binding events at the LC-aqueous interface. The homeotropic alignment of LCs at the aqueous-LC interface is due to the self-assembly of the cationic surfactant cetyltrimethylammonium bromide (CTAB). In the presence of the negatively charged NOX aptamer, the ordering changes to planar/tilted. On addition of NOX, the aptamer-NOX binding causes redistribution of CTAB at the LC-aqueous interface and the homeotropic orientation is restored. This results in a bright-to-dark optical transition under a polarized optical microscope (POM). This optical transition serves as a visual indicator to mark the presence of NOX. The devised aptasensor demonstrates high specificity with a minimum detection limit of 5 nM (1.596 ppb). Moreover, the application of the developed aptasensor for the detection of NOX in freshwater and soil samples underscores its practical utility in environmental monitoring. This proposed LC-based method offers several advantages over conventional detection techniques for a rapid, feasible and convenient way to detect norfloxacin.

Liquid-crystal-based fiber laser sensor for non-invasive gas detection

This Letter reports a new optical fiber gas sensor for measuring breath acetone. The sensor is based on photonic bandgap (PBG) mode laser emission sensing technology using liquid crystal (LC), which is combined with silica fiber and chiral nematic liquid crystal (CNLC), thus providing an ultra-compact, fast-response and simple-to-produce sensing system with a fast response that can accurately and quantitatively determine the concentration of respiratory acetone within the normal oral temperature range (35-38°C). Since LCs are affected by temperature, we propose a method that eliminates the influence of the temperature to solve the problem of the temperature influence when measuring gas. The detection of acetone leads to splitting of the dual laser peaks, with a linear correlation of 0.99. The sensor has a limit of detection of 65 ppm for acetone vapor and thus is suitable for breath acetone detection in diabetic patients.

Liquid Crystal Biosensors: A New Therapeutic Window to Point-of-Care Diagnostics

After revolutionizing the field of electro-optic displays, liquid crystals (LCs) are emerging as functional soft materials with wide-ranging biomedical implications. Integrating smart sensor designs with label-free imaging presents exciting opportunities in diagnostics. In this Perspective, we present an elegant collage of the key findings that demonstrate the utility of LC biosensors in diagnosing a disease or infection in clinical samples, cellular microenvironments, or bodily fluids. We emphasize the currently prevalent diagnostic techniques and the advances made using LCs in achieving greater sensitivity, a simplified strategy, multiplexed detection, and so on. We collate the landmark contributions in translational research in LC-based diagnostics. We believe that developing LC-based biosensors presents a new therapeutic window in point-of-care diagnostics.

Exosomes from Adipose-Derived Mesenchymal Stem Cells Protect Against Cyclophosphamide-Induced Cardiotoxicity in Rats

A certain dosage of cyclophosphamide (CYP) in clinical applications contributes to severe cardiotoxicity. Herein, this study explored the impact of adipose-derived mesenchymal stem cell (AdMSC)-exosomes (Exos) on CYP-induced cardiotoxicity.AdMSCs and AdMSCs-Exos were isolated and identified. CYP was utilized for developing a cardiotoxicity rat model, after which blood was collected and then the serum contents of cardiac injury-related indexes (creatine kinase-MB, lactate dehydrogenase, aspartate aminotransferase, and alkaline phosphatase) were detected with enzyme-linked immunosorbent assay kits. Oxidative stress (OS)-related indicators were measured with the corresponding kits. Myocardial pathological changes and collagen fibrosis were tested with hematoxylin-eosin and Masson staining, and apoptosis-related and autophagy-related proteins in rat cardiac tissues with immunohistochemistry and Western blot assays, respectively.AdMSCs and AdMSCs-Exos were successfully isolated. AdMSCs-Exos could target rat hearts. AdMSCs-Exos improved cardiac function and diminished the content of the cardiac injury-related indexes in CYP rats. In addition, AdMSCs-Exos reduced CYP-induced cardiac fibrosis, OS, apoptosis, and autophagy in rats.AdMSCs-Exos alleviated CYP-induced cardiotoxicity in rats via the repression of OS, apoptosis, and autophagy.

Recent Development of Tunable Optical Devices Based on Liquid

Liquid opens up a new stage of device tunability and gradually replaced solid-state devices and mechanical tuning. It optimizes the control method and improves the dynamic range of many optical devices, exhibiting several attractive features, such as rapid prototyping, miniaturization, easy integration and low power consumption. The advantage makes optical devices widely used in imaging, optical control, telecommunications, autopilot and lab-on-a-chip. Here, we review the tunable liquid devices, including isotropic liquid and anisotropic liquid crystal devices. Due to the unique characteristics of the two types of liquids, the tuning principles and tuning methods are distinguished and demonstrated in detail firstly and then some recent progress in this field, covering the adaptive lens, beam controller, beam filter, bending waveguide, iris, resonator and display devices. Finally, the limitations and future perspectives of the current liquid devices are discussed.

State-of-the-Art Development in Liquid Crystal Biochemical Sensors

As an emerging stimuli-responsive material, liquid crystal (LC) has attracted great attentions beyond display applications, especially in the area of biochemical sensors. Its high sensitivity and fast response to various biological or chemical analytes make it possible to fabricate a simple, real-time, label-free, and cost-effective LC-based detection platform. Advancements have been achieved in the development of LC-based sensors, both in fundamental research and practical applications. This paper briefly reviews the state-of-the-art research on LC sensors in the biochemical field, from basic properties of LC material to the detection mechanisms of LC sensors that are categorized into LC-solid, LC-aqueous, and LC droplet platforms. In addition, various analytes detected by LCs are presented as a proof of the application value, including metal ions, nucleic acids, proteins, glucose, and some toxic chemical substances. Furthermore, a machine-learning-assisted LC sensing platform is realized to provide a foundation for device intelligence and automatization. It is believed that a portable, convenient, and user-friendly LC-based biochemical sensing device will be achieved in the future.

Technological Advancements in Bio‐recognition using Liquid Crystals: Techniques, Applications, and Performance

The application of liquid crystal (LC) materials has undergone a modern-day renaissance from its classical use in electronics industry as display devices to new-fangled techniques for optically detecting biological and chemical analytes. This review article deals with the emergence of LC materials as invaluable material for their use as label-free sensing elements in the development of optical, electro-optical and electrochemical biosensors. The property of LC molecules to change their orientation on perturbation by any external stimuli or on interaction with bioanalytes or chemical species has been utilized by many researches for the fabrication of high sensitive LC-biosensors. In this review article we categorized LC-biosensor based on biomolecular reaction mechanism viz. enzymatic, nucleotides and immunoreaction in conjunction with operating principle at different LC interface namely LC-solid, LC-aqueous and LC-droplets. Based on bimolecular reaction mechanism, the application of LC has been delineated with recent progress made in designing of LC-interface for the detection of bio and chemical analytes of proteins, virus, bacteria, clinically relevant compounds, heavy metal ions and environmental pollutants. The review briefly describes the experimental set-ups, sensitivity, specificity, limit of detection and linear range of various viable and conspicuous LC-based biosensor platforms with associated advantages and disadvantages therein.

Development and Application of Liquid Crystals as Stimuli-Responsive Sensors

This focused review presents various approaches or formats in which liquid crystals (LCs) have been used as stimuli-responsive sensors. In these sensors, the LC molecules adopt some well-defined arrangement based on the sensor composition and the chemistry of the system. The sensor usually consists of a molecule or functionality in the system that engages in some form of specific interaction with the analyte of interest. The presence of analyte brings about the specific interaction, which then triggers an orientational transition of the LC molecules, which is optically discernible via a polarized optical image that shows up as dark or bright, depending on the orientation of the LC molecules in the system (usually a homeotropic or planar arrangement). The various applications of LCs as biosensors for glucose, protein and peptide detection, biomarkers, drug molecules and metabolites are extensively reviewed. The review also presents applications of LC-based sensors in the detection of heavy metals, anionic species, gases, volatile organic compounds (VOCs), toxic substances and in pH monitoring. Additionally discussed are the various ways in which LCs have been used in the field of material science. Specific attention has been given to the sensing mechanism of each sensor and it is important to note that in all cases, LC-based sensing involves some form of orientational transition of the LC molecules in the presence of a given analyte. Finally, the review concludes by giving future perspectives on LC-based sensors.

Isoflurane alleviates hypoxia/reoxygenation induced myocardial injury by reducing miR-744 mediated SIRT6

BACKGROUND

The objective of this study was to investigate the role of miR-744 and its target genes in ISO protection against hypoxia/reoxygenation (H/R) induced myocardial injury.

METHODS

Rat cardiomyocytes H9c2 was used to establish an H/R model in vitro, and the level of miR-744 mRNA was detected by fluorescence quantitative PCR. CCK-8 and flow cytometry was used to detected cell viability and apoptosis. Myocardial injury markers CK-MB, cTnI, and LDH were detected by enzyme-linked immunosorbent assay (ELISA). Online bioinformatics software miRDB and miRWalk predicts miR-744 target and its potential binding site, and verifies the target by luciferase reporter assay.

RESULTS

After H/R induction, miR-744 mRNA level was remarkedly increased, cell viability was deceased, and apoptosis was increased (p < 0.05). Myocardial injury markers CK-MB, cTnI, and LDH expressions were also increased (p < 0.05). However, ISO pretreatment can significantly alleviate the decrease in cell viability induced by H/R, the increase of cell apoptosis, and the increase of myocardial injury markers, and it play a cardioprotective effect (p < 0.05). More importantly, elevated miR-744 remarkedly weakened the protective effect of ISO on H/R-induced myocardial injury, resulting in decreased cell viability, increased apoptosis, and elevated concentration of myocardial injury indicators (p < 0.05). Luciferase reporter assay confirmed that Sirtuins6 (SIRT6) is a potential target of miR-744 and decreased in H/R-induced myocardial injury, and ISO exposure can reverse its level (p < 0.05).

CONCLUSION

Our findings provide new insights that ISO pretreatment can remarkedly regulate miR-744 and its downstream target SIRT6 to mitigate myocardial injury induced by H/R.

Effect of Position and Structure of the Terminal Moieties in the Side Group on the Liquid Crystal Alignment Behavior of Polystyrene Derivatives

We synthesized a series of polystyrene derivatives containing various side groups, such as the 4-(tert-butyl)-phenoxymethyl, 3-(tert-butyl)-phenoxymethyl, 2-(tert-butyl)-phenoxymethyl, 4-cumyl-phenoxymethyl, and 4-trityl-phenoxymethyl groups, through a polymer modification reaction to examine the liquid crystal (LC) alignment of these derivatives. In general, the vertical LC alignment on polymer films can be affected by the position and structure of the terminal moiety of the polymer side group. For example, the LC cells fabricated with 4-(tert-butyl)-phenoxymethyl-substituted polystyrene having a tert-butyl moiety as a para-type attachment to the phenoxy groups of the polystyrene derivatives exhibited vertical LC alignment, whereas the LC cells prepared from 3-(tert-butyl)- and 2-(tert-butyl)-phenoxymethyl-substituted polystyrene films exhibited planar LC alignment. In addition, the LC cells fabricated from 4-cumyl- and 4-trityl-phenoxymethyl-substituted polystyrene films with additional phenyl rings in the side groups exhibited planar LC alignment, in contrast to the LC alignment of the (tert-butyl)-phenoxymethyl-substituted polystyrene series. The vertical LC orientation was well correlated with the surface energy of these polymer films. For example, vertical LC orientation, which mainly originates due to the nonpolar tertiary carbon moiety having bulky groups, was observed when the surface energy of the polymer was lower than 36.6 mJ/m2.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

Vertical Orientation of Liquid Crystal on Polystyrene Substituted with n-alkylbenzoate-p-oxymethyl Pendant Group as a Liquid Crystal Precursor

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules via polymer modification reactions. Thereafter, the orientation of the LC molecules on the polymer films, which possess part of the corresponding LC molecular structure, was investigated systematically. The precursors and the corresponding derivatives used in this study include ethyl-p-hydroxybenzoate (homopolymer P2BO and copolymer P2BO#, where # indicates the molar fraction of ethylbenzoate-p-oxymethyl in the side chain (# = 20, 40, 60, and 80)), n-butyl-p-hydroxybenzoate (P4BO), n-hexyl-p-hydroxybenzoate (P6BO), and n-octyl-p-hydroxybenzoate (P8BO). A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with P2BO#, with 40 mol% or more ethylbenzoate-p-oxymethyl side groups. In addition, the LC molecules were oriented vertically in LC cells fabricated with homopolymers of P2BO, P4BO, P6BO, and P8BO. The water contact angle on the polymer films can be associated with the vertical orientation of the LC molecules in the LC cells fabricated with the polymer films. For example, vertical LC orientation was observed when the water contact angle of the polymer films was greater than ~86°. Good orientation stability was observed at 150 °C and with 20 J/cm2 of UV irradiation for LC cells fabricated with the P2BO film.

Applications of liquid crystals in biosensing

Liquid crystals (LCs), as a promising branch of highly-sensitive, quick-response, and low-cost materials, are widely applied to the detection of weak external stimuli and have attracted significant attention. Over the past decade, many research groups have been devoted to developing LC-based biosensors due to their self-assembly potential and functional diversity. In this paper, recent investigations on the design and application of LC-based biosensors are reviewed, based on the phenomenon that the orientation of LCs can be directly influenced by the interactions between biomolecules and LC molecules. The sensing principle of LC-based biosensors, as well as their signal detection by probing interfacial interactions, is described to convert, amplify, and quantify the information from targets into optical and electrical parameters. Furthermore, commonly-used LC biosensing targets are introduced, including glucose, proteins, enzymes, nucleic acids, cells, microorganisms, ions, and other micromolecules that are critical to human health. Due to their self-assembly potential, chemical diversity, and high sensitivity, it has been reported that tunable stimuli-responsive LC biosensors show bright perspectives and high superiorities in biological applications. Finally, challenges and future prospects are discussed for the fabrication and application of LC biosensors to both enhance their performance and to realize their promise in the biosensing industry.

Vertical Orientation of Liquid Crystal on Comb-Like 4-(trans-4-alkylcyclohexyl)phenoxymethyl-substituted Polystyrene Containing Liquid Crystal Precursor

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules, including 4-(trans-4-ethylcyclohexyl)phenol (homopolymer PECH and copolymer PECH#; # = 5, 10, 15, 20, 40, 60, and 80, where # indicates the molar fraction of 4-(trans-4-ethylcyclohexyl)phenoxymethyl in the side chain), 4-(trans-4-propylcyclohexyl)phenol (PPCH), 4-(trans-4-butylcyclohexyl)phenol (PBCH), and 4-(trans-4-amylcyclohexyl)phenol (PAmCH) via polymer modification reactions in order to investigate the orientation of LC molecules on polymer films exhibiting part of the LC molecular structure. A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with PECH#, having 15 mol% or more of 4-(trans-4-ethylcyclohexyl)phenoxymethyl side groups. In addition, the vertical orientation of LC molecules was observed in LC cells fabricated with homopolymers of PECH, PPCH, PBCH, and PAmCH. The water contact angle on the polymer films could be associated with the vertical orientation of the LC molecules in the LC cells fabricated with polymer films. For example, a vertical LC orientation was observed when the water contact angle of the polymer films was higher than ~81°. Good orientation stability was observed at 200 °C and 15 mW/cm2 of UV irradiation for LC cells fabricated with PECH films.

A Label-Free Liquid Crystal Biosensor Based on Specific DNA Aptamer Probes for Sensitive Detection of Amoxicillin Antibiotic

We developed a liquid crystal (LC) aptamer biosensor for the sensitive detection of amoxicillin (AMX). The AMX aptamer was immobilized onto the surface of a glass slide modified with a mixed self-assembled layer of dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP) and (3-aminopropyl) triethoxysilane (APTES). The long alkyl chains of DMOAP maintained the LC molecules in a homeotropic orientation and induced a dark optical appearance under a polarized light microscope (POM). In the presence of AMX, the specific binding of the aptamer and AMX molecules induced a conformational change in the aptamers, leading to the disruption of the homeotropic orientation of LCs, resulting in a bright optical appearance. The developed aptasensor showed high specificity and a low detection limit of 3.5 nM. Moreover, the potential application of the developed aptasensor for the detection of AMX in environmental samples was also demonstrated. Therefore, the proposed aptasensor is a promising platform for simple, rapid, and label-free monitoring of AMX in an actual water environment with high selectivity and sensitivity.

Alignment Layer of Liquid Crystal Using Plant-Based Isoeugenol-Substituted Polystyrene

We synthesized a series of renewable and plant-based isoeugenol-substituted polystyrenes (PIEU#, # = 100, 80, 60, 40, and 20, where # is the molar percent content of isoeugenol moiety), using polymer modification reactions to study their liquid crystal (LC) alignment behavior. In general, the LC cells fabricated using polymer film with a higher molar content of isoeugenol side groups showed vertical LC alignment behavior. This alignment behavior was well related to the surface energy value of the polymer layer. For example, vertical alignments were observed when the polar surface energy value of the polymer was smaller than approximately 3.59 mJ/m2, generated by the nonpolar isoeugenol moiety with long and bulky carbon groups. Good alignment stability at 100 °C and under ultraviolet (UV) irradiation of 15 J/cm2 was observed for the LC cells fabricated using PIEU100 as a LC alignment layer. Therefore, renewable isoeugenol-based materials can be used to produce an eco-friendly vertical LC alignment system.

Quantitative and sensitive detection of lipase using a liquid crystal microfiber biosensor based on the whispering-gallery mode

We demonstrate a quantitative and sensitive strategy for monitoring the lipase concentration using a liquid crystal microfiber biosensor based on the whispering-gallery mode.