Anti-CCP biosensors in rheumatoid arthritis

Biosensors are unique analytical tools for the detection of biomarkers. Of these, autoantibodies against citrullinated proteins (ACPA) are useful for the differential diagnosis of rheumatoid arthritis (RA). The autoantibodies may be detected by immunoassay technology using synthetic cyclic citrullinated peptides (CCP), ie, anti-CCP. Recently, several biosensors have been developed for anti-CCP using CCP and mutated citrullinated vimentin (MCV) as recognition elements. In this review we highlight all currently available ACPA biosensor technology including those based on fluorescence, chemiluminescence, electrochemiluminescence (ECL), surface-enhanced Raman scattering (SERS)-based, surface plasmon resonance (SPR), lateral flow immunoassays (LFIA), and electrochemical. We explore various peptides as recognition elements, electrode modifiers and signal amplification systems thus providing new opportunities for next-generation biosensor design in RA.

Recent Advances in Biosensors for Diagnosis of Autoimmune Diseases

Over the last decade, autoimmune diseases (ADs) have undergone a significant increase because of genetic and/or environmental factors; therefore, their simple and fast diagnosis is of high importance. The conventional diagnostic techniques for ADs require tedious sample preparation, sophisticated instruments, a dedicated laboratory, and qualified personnel. For these reasons, biosensors could represent a useful alternative to these methods. Biosensors are considered to be promising tools that can be used in clinical analysis for an early diagnosis due to their high sensitivity, simplicity, low cost, possible miniaturization (POCT), and potential ability for real-time analysis. In this review, recently developed biosensors for the detection of autoimmune disease biomarkers are discussed. In the first part, we focus on the main AD biomarkers and the current methods of their detection. Then, we discuss the principles and different types of biosensors. Finally, we overview the characteristics of biosensors based on different bioreceptors reported in the literature.

Serum Autoantibody Biomarkers for Management of Rheumatoid Arthritis Disease

Rheumatoid arthritis (RA) is a systemic chronic autoimmune inflammatory disease that is characterized by the destruction of bone and production of autoantibodies such as rheumatoid factor (RF) and anticitrullinated protein antibodies (ACPAs). The high prevalence of this disease and the need of affordable tools for its early detection led us to prepare the first electrochemical immunoplatform for the simultaneous determination of four RA biomarkers, the autoantibodies: RF, anti-peptidyl-arginine deiminase enzyme (anti-PAD4), anti-cyclic citrullinated peptide (anti-CCP), and anti-citrullinated vimentin (anti-MCV). Functionalized magnetic beads (MBs) were used to immobilize the specific antigens, and sandwich-type immunoassays were implemented for the amperometric detection of the four autoantibodies, using the horseradish peroxidase (HRP)/H₂O₂/hydroquinone (HQ) system. The immunoplatform was applied to the determination of the biomarkers in human serum of twenty-two patients diagnosed with RA and four healthy individuals, and the results were validated against ELISA tests and the certified values.

Immunosensing for Early Detection of Rheumatoid Arthritis Biomarkers: Anti-Cyclic Citrullinated Peptide Antibodies Based on Tilted-Fiber Bragg Grating Biosensor

Rheumatoid arthritis (RA) is regarded as a chronic, immune-mediated disease that leads to the damage of various types of immune cells and signal networks, followed by inappropriate tissue repair and organ damage. RA is primarily manifested in the joints, but also manifests in the lungs and the vascular system. This study developed a method for the in vitro detection of RA through cyclic citrullinated peptide (CCP) antibodies and antigens. The diameter of a tilted-fiber Bragg grating (TFBG) biosensor was etched to 50 μm and then bonded with CCP antigens and antibodies. The small variations in the external refractive index and the optical fiber cladding were measured. The results indicated that the self-assembled layer of the TFBG biosensor was capable of detecting pre- and post-immune CCP antigen and CCP peptide concentrations within four minutes. A minimum CCP concentration of 1 ng/mL was detected with this method. This method is characterized by the sensor's specificity, ability to detect CCP reactions, user-friendliness, and lack of requirement for professional analytical skills, as the detections are carried out by simply loading and releasing the test samples onto the platform. This study provides a novel approach to medical immunosensing analysis and detection. Although the results for the detection of different concentrations of CCP antigen are not yet clear, it was possible to prove the concept that the biosensor is feasible even if the measurement is not easy and accurate at this stage. Further study and improvement are required.

Electrochemical (Bio)Sensing Devices for Human-Microbiome-Related Biomarkers

The study of the human microbiome is a multidisciplinary area ranging from the field of technology to that of personalized medicine. The possibility of using microbiota biomarkers to improve the diagnosis and monitoring of diseases (e.g., cancer), health conditions (e.g., obesity) or relevant processes (e.g., aging) has raised great expectations, also in the field of bioelectroanalytical chemistry. The well-known advantages of electrochemical biosensors-high sensitivity, fast response, and the possibility of miniaturization, together with the potential for new nanomaterials to improve their design and performance-position them as unique tools to provide a better understanding of the entities of the human microbiome and raise the prospect of huge and important developments in the coming years. This review article compiles recent applications of electrochemical (bio)sensors for monitoring microbial metabolites and disease biomarkers related to different types of human microbiome, with a special focus on the gastrointestinal microbiome. Examples of electrochemical devices applied to real samples are critically discussed, as well as challenges to be faced and where future developments are expected to go.

A brief review on novel biomarkers identified and advanced biosensing technologies developed for rapid diagnosis of Japanese Encephalitis Virus

Advanced biosensor technology research is imperative for the management of infectious disease outbreaks such as Japanese Encephalitis (JE), a zoonotic disease caused by the flavivirus JE virus (JEV) which is transmitted to humans (dead-end hosts) from the amplification host, pigs, via mosquitoes. To avoid future pandemic scenarios, proactive research rather than responsive research in the field of diagnostics is a requirement for development of rapid, sensitive and specific screening detection methods. In this mini-review, we have critically compared and evaluated the different types of biomarkers (antigen, antibody, nucleic acid) identified for JEV diagnostics and their specific roles in the manifestation of the infection which may be potentially used for therapeutics and drug development as no treatment is available for JE. Furthermore, different biosensors developed for the detection of JEV biomarkers have been discussed in detail to give an overview of the working principles (electrochemical, optical, etc.), fabrication components (signal amplifier, bioreceptor, etc.), detection limits and response times. This review provides a compact compiled base on available JEV diagnostic research work being currently carried out along with their limitations, future prospective, and major challenges faced. This will enable future development of rapid point-of-care diagnostic screening methods for JEV infection management, which may help reduce number of fatalities.

Peptide-based electrochemical sensor with nanogold enhancement for detecting rheumatoid arthritis

Rheumatoid arthritis (RA), an autoimmune and chronic inflammatory disorder, is an incurable disease. We developed a peptide-based electrochemical sensor using electrochemical impedance spectroscopy that can be used to detect autoantibodies for RA diagnostics. We first validated that the developed peptide showed high sensitivity and could compliment the current gold standard method of an anti-cyclic citrullinated peptide antibody (anti-CCP) ELISA. The developed peptide can be modified on the nanogold surface of the working electrode of sensing chips through the method of a self-assembling monolayer. The sensing process was first optimized using a positive control cohort and a healthy control cohort. Subsequently, 10 clinically confirmed samples from RA patients and five healthy control samples were used to find the threshold value of the impedance between RA and healthy subjects. Furthermore, 10 clinically confirmed samples but with low values of anti-CCP autoantibodies were used to evaluate the sensitivity of the present method compared to the conventional method. The proposed method showed better sensitivity than the current conventional anti-CCP ELISA method.

Simultaneous detection of multiple neuroendocrine tumor markers in patient serum with an ultrasensitive and antifouling electrochemical immunosensor

Neuroendocrine tumors (NETs) are rare heterogeneous tumors that are often misdiagnosed and mistreated. Most NETs patients are diagnosed as advanced. Early on-time detection of NETs is significant for precision therapy. Here, an ultrasensitive and antifouling label-free electrochemical immunosensor was constructed for simultaneous analysis of NETs biomarkers chromogranin A (CgA) and chromogranin B (CgB). The metal ion functionalized porous magnesium silicate/gold nanoparticles/polyethylene glycol/chitosan (PMS-M²⁺/AuNPs/PEG/CS) composites were employed as the sensing platforms. By combining PEG and CS with good hydrophilicity, the sensing interface exhibited outstanding antifouling ability in complex biological systems. PMS with high surface area and the porous structure can efficiently load Cu²⁺ and Pb²⁺, which could directly generate independent electrochemical peak currents that reflected the concentrations of CgA and CgB. Under optimal conditions, this immunosensor can detect CgA and CgB with good linearity from 0.1 pg mL^-1 to 100 ng mL^-1 as low as 5.3 and 2.1 fg mL^-1, respectively. Moreover, this immunosensor can accurately detect CgA and CgB levels in clinical serum, which were well consistent with the enzyme-linked immunosorbent assay (ELISA). This strategy provided a sensitive, simple and low-cost platform for clinical screening and point-of-care diagnosis of NETs.

The Role of Peptides in the Design of Electrochemical Biosensors for Clinical Diagnostics

Peptides represent a promising class of biorecognition elements that can be coupled to electrochemical transducers. The benefits lie mainly in their stability and selectivity toward a target analyte. Furthermore, they can be synthesized rather easily and modified with specific functional groups, thus making them suitable for the development of novel architectures for biosensing platforms, as well as alternative labelling tools. Peptides have also been proposed as antibiofouling agents. Indeed, biofouling caused by the accumulation of biomolecules on electrode surfaces is one of the major issues and challenges to be addressed in the practical application of electrochemical biosensors. In this review, we summarise trends from the last three years in the design and development of electrochemical biosensors using synthetic peptides. The different roles of peptides in the design of electrochemical biosensors are described. The main procedures of selection and synthesis are discussed. Selected applications in clinical diagnostics are also described.

Advances in the diagnosis of autoimmune diseases based on citrullinated peptides/proteins

Introduction: Autoimmune diseases are still one of the hard obstacles associated with humanity. There are many exogenous and endogenous etiological factors behind autoimmune diseases, which may be combined or dispersed to stimulate the autoimmune responses. Protein citrullination represents one of these factors. Harnessing specific citrullinated proteins/peptides could early predict and/or diagnose some of the autoimmune diseases. Many generations of diagnostic tools based on citrullinated peptides with comparable specificity/sensitivity are available worldwide.Areas covered: In this review, we discuss the deimination reaction behind the citrullination of most known autoantigens targeted, different generations of diagnostic tools based on citrullinated probes with specificity/sensitivity of each as well as newly developed assays. Furthermore, the most advanced molecular analytical tools to detect the citrullinated residues in the biological fluid and their performance are also evaluated, providing new avenues to early detect autoimmune diseases with high accuracy.Expert opinion: With the current specificity/sensitivity tools available for autoimmune disease detection, emphasis must be placed on developing more advance and effective, early, rapid, and simple diagnostic devices for autoimmune disease monitoring (similar to a portable device for sugar test at home). The molecular analytical devices with dual and/or multiplexe functions should be more simplified and invested in clinical laboratories.

Electrochemical Immunosensor for the Early Detection of Rheumatoid Arthritis Biomarker: Anti-Cyclic Citrullinated Peptide Antibody in Human Serum Based on Avidin-Biotin System

Rheumatoid arthritis (RA) is a chronic autoimmune disease that produces a progressive inflammatory response that leads to severe pain, swelling, and stiffness in the joints of hands and feet, followed by irreversible damage of the joints. The authors developed a miniaturized, label-free electrochemical impedimetric immunosensor for the sensitive and direct detection of arthritis Anti-CCP-ab biomarker. An interdigitated-chain-shaped microelectrode array (ICE) was fabricated by taking the advantage of microelectromechanical systems. The fabricated ICE was modified with a self-assembled monolayer (SAM) of Mercaptohexanoic acid (MHA) for immobilization of the synthetic peptide bio-receptor (B-CCP). The B-CCP was attached onto the surface of SAM modified ICE through a strong avidin-biotin bio-recognition system. The modified ICE surface with the SAM and bio-molecules (Avidin, B-CCP, Anti-CCP-ab and BSA) was morphologically and electrochemically characterized. The change in the sensor signal upon analyte binding on the electrode surface was probed through the electrochemical impedance spectroscopy (EIS) property of charge-transfer resistance (R_ct) of the modified electrodes. EIS measurements were target specific and the sensor response was linearly increased with step wise increase in target analyte (Anti-CCP-ab) concentrations. The developed sensor showed a linear range for the addition of Anti-CCP-ab between 1 IU mL⁻¹ → 800 IU mL⁻¹ in phosphate buffered saline (PBS) and Human serum (HS), respectively. The sensor showed a limit of detection of 0.60 IU mL⁻¹ and 0.82 IU mL⁻¹ in the PBS and HS, respectively. The develop bio-electrode showed a good reproducibility (relative standard deviation (RSD), 1.52%), selectivity and stability (1.5% lost at the end of 20th day) with an acceptable recovery rate (98.0% → 101.18%) and % RSD’s for the detection of Anti-CCP-ab in spiked HS samples.

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Electrochemical sensors have increasingly been linked with terms as modern biomedically effective highly selective and sensitive devices, wearable and wireless technology, portable electronics, smart textiles, energy storage, communication and user-friendly operating systems. The work brings the overview of the current advanced materials and their application strategies for improving performance, miniaturization and portability of sensing devices. It provides the extensive information on recently developed (bio)sensing platforms based on voltammetric, amperometric, potentiometric and impedimetric detection modes including portable, non-invasive, wireless, and self-driven miniaturized devices for monitoring human and animal health. Diagnostics of selected free radical precursors, low molecular biomarkers, nucleic acids and protein-based biomarkers, bacteria and viruses of today's interest is demonstrated.

The Current Trends of Biosensors in Tissue Engineering

Biosensors constitute selective, sensitive, and rapid tools for disease diagnosis in tissue engineering applications. Compared to standard enzyme-linked immunosorbent assay (ELISA) analytical technology, biosensors provide a strategy to real-time and on-site monitor micro biophysiological signals via a combination of biological, chemical, and physical technologies. This review summarizes the recent and significant advances made in various biosensor technologies for different applications of biological and biomedical interest, especially on tissue engineering applications. Different fabrication techniques utilized for tissue engineering purposes, such as computer numeric control (CNC), photolithographic, casting, and 3D printing technologies are also discussed. Key developments in the cell/tissue-based biosensors, biomolecular sensing strategies, and the expansion of several biochip approaches such as organs-on-chips, paper based-biochips, and flexible biosensors are available. Cell polarity and cell behaviors such as proliferation, differentiation, stimulation response, and metabolism detection are included. Biosensors for diagnosing tissue disease modes such as brain, heart, lung, and liver systems and for bioimaging are discussed. Finally, we discuss the challenges faced by current biosensing techniques and highlight future prospects of biosensors for tissue engineering applications.