A novel signal amplified electrochemiluminescence biosensor based on MIL-53(Al)@CdS QDs and SiO2@AuNPs for trichlorfon detection

Metal-organic frameworks (MOFs) based luminescent and electrochemical sensors for food contaminant detection

With the increasing population, food toxicity has become a prevalent concern due to the growing contaminants of food products. Therefore, the need for new materials for toxicant detection and food quality monitoring will always be in demand. Metal-organic frameworks (MOFs) based on luminescence and electrochemical sensors with tunable porosity and active surface area are promising materials for food contaminants monitoring. This review summarizes and studies the most recent progress on MOF sensors for detecting food contaminants such as pesticides, antibiotics, toxins, biomolecules, and ionic species. First, with the introduction of MOFs, food contaminants and materials for toxicants detection are discussed. Then the insights into the MOFs as emerging materials for sensing applications with luminescent and electrochemical properties, signal changes, and sensing mechanisms are discussed. Next, recent advances in luminescent and electrochemical MOFs food sensors and their sensitivity, selectivity, and capacities for common food toxicants are summarized. Further, the challenges and outlooks are discussed for providing a new pathway for MOF food contaminant detection tools. Overall, a timely source of information on advanced MOF materials provides materials for next-generation food sensors.

Nanomaterial interfaces designed with different biorecognition elements for biosensing of key foodborne pathogens

Foodborne diseases caused by pathogen bacteria are a serious problem toward the safety of human life in a worldwide. Conventional methods for pathogen bacteria detection have several handicaps, including trained personnel requirement, low sensitivity, laborious enrichment steps, low selectivity, and long-term experiments. There is a need for precise and rapid identification and detection of foodborne pathogens. Biosensors are a remarkable alternative for the detection of foodborne bacteria compared to conventional methods. In recent years, there are different strategies for the designing of specific and sensitive biosensors. Researchers activated to develop enhanced biosensors with different transducer and recognition elements. Thus, the aim of this study was to provide a topical and detailed review on aptamer, nanofiber, and metal organic framework-based biosensors for the detection of food pathogens. First, the conventional methods, type of biosensors, common transducer, and recognition element were systematically explained. Then, novel signal amplification materials and nanomaterials were introduced. Last, current shortcomings were emphasized, and future alternatives were discussed.

Novel strategies for the formulation and processing of aluminum metal-organic framework-based sensing systems toward environmental monitoring of metal ions

Aluminum is a relatively inexpensive and abundant metal for the mass production of metal-organic frameworks (MOFs). Aluminum-based MOFs (Al-MOFs) have drawn a good deal of research interest due to their unique properties for diverse applications (e.g., excellent chemical and structural stability). This review has been organized to highlight the current progress achieved in the synthesis/functionalization of Al-MOF materials with the special emphasis on their sensing application, especially toward metal ion pollutants in the liquid phase. To learn more about the utility of Al-MOF-based sensing systems, their performances have been evaluated for diverse metallic components in reference to many other types of sensing systems (in terms of the key quality assurance (QA) criteria such as limit of detection (LOD)). Finally, the challenges and outlook for Al-MOF-based sensing systems are discussed to help expand their real-world applications.

A Sensitive Electrochemiluminescence Urea Sensor for Dynamic Monitoring of Urea Transport in Living Cells

A multiple signal-amplified electrochemiluminescence (ECL) urea sensor was designed based on a self-enhanced probe and SiO₂ photonic crystals for dynamic tracking of urea transmembrane transport. The self-enhanced probe (AuNR@Ru-LA) prepared by loading polyethyleneimine (PEI), lactobionic acid (LA), and Ru(dcbpy)₃²⁺ on gold nanorods (AuNRs) generated an initial ECL signal, and then the intensity was multiple-amplified by the enhanced light-scattering effect of SiO₂ photonic crystals and the co-reaction with urea. The as-prepared sensor exhibited excellent performance for the detection of urea in the range of 1.0 × 10^-10 to 1.0 × 10^-4 M with a detection limit of 8.8 × 10^-11 M at (3σ)/S. The AuNR@Ru-LA probes were labeled on HepG2 cells to construct a cytosensor with a detection range of 1.0 × 10³ to 2.0 × 10⁶ cells mL^-1. In addition, the dynamic changes of the extracellular urea concentration were tracked by monitoring the ECL signal of the cytosensor to study urea transmembrane transport. The developed strategy realized the amplification of multiple ECL signals and the tracking of urea transmembrane transport, which provided a novel dynamic detection method for small biomolecules.

Determination of trichlorfon using a molecularly imprinted electrochemiluminescence sensor on multi-walled carbon nanotubes decorated with silver nanoparticles

Considering the limitations associated with existing methods for the detection of trace amounts of trichlorfon, this paper proposes a novel molecularly imprinted electrochemiluminescence (ECL) sensor for the detection of trichlorfon by utilizing the double enhancement effect of trichlorfon and Ag nanoparticles supported by multi-walled carbon nanotubes (MWCNTs/Ag NPs) in a luminol-H₂O₂ ECL system. Here, trichlorfon was electropolymerized on the surface of the MWCNT/Ag NP-modified gold nanoelectrode with o-phenylenediamine to prepare the molecularly imprinted polymer-based sensor. After eluting the trichlorfon, imprinted holes for the identification of trichlorfon were retained on the sensor, which were used as signal switches to obtain different ECL intensities through the adsorption of different concentrations of trichlorfon. The ECL signal of the sensitized luminol-H₂O₂ was doubly enhanced by the MWCNTs/Ag and trichlorfon, improving the sensitivity of the sensor. The trichlorfon concentration was positively correlated with the enhanced ECL intensity of the sensor in the range 5.0 × 10^-8-5.0 × 10^-11 mol L^-1, and the detection limit of trichlorfon was 3.9 × 10^-12 mol L^-1. Moreover, the proposed sensor was successfully applied to the detection of trichlorfon residues in real samples, and the recovery ranged between 91.8 and 109%. A molecularly imprinted electrochemiluminescence sensor for trichlorfon detection by utilizing the double enhancement effect of trichlorfon and Ag nanoparticles supported by multi-walled carbon nanotubes in a luminol-H₂O₂ ECL system. The dual enhancement of the ECL signal improved the sensitivity of the sensor.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and metal-polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Advanced screening and tailoring strategies of pesticide aptamer for constructing biosensor

The rapid development of aptamers has helped address the challenges presented by the wide existed pesticides contaminations. Screening of aptamers with excellent performance is a prerequisite for successfully constructing biosensors, while further tailoring of aptamers with enhanced activity greatly improved the assay performance. Firstly, this paper reviewed the advanced screening strategies for pesticides aptamers, including immobilization screening that preserves the native structures of targets, non-immobilized screening based on nanomaterials, capillary electrophoresis-systematic evolution of ligands by exponential enrichment (CE-SELEX), virtual screening in silico, high-throughput selection, and rational secondary library generation methods, which contributed significantly to improve the success rate of screening, reduce the screening time, and ensure aptamer binding affinity. Secondly, the precise tailoring strategies for pesticides aptamers were modularly elaborated, containing deletion, splitting, elongation, and fusion, which provided various advantages like cost-efficiency, enhanced binding affinity, and new derived functional motifs. Thirdly, the developed aptamer-based biosensors (aptasensors) for pesticide detection were systematically reviewed according to the different signal output modes. Finally, the challenges and future perspectives of pesticide detection are discussed comprehensively.

Highly sensitive visual colorimetric sensor for trichlorfon detection based on the inhibition of metallization of gold nanorods

In this study, a highly sensitive visual colorimetric sensor was designed for the detection of trichlorfon based on inhibiting ascorbate oxidase (AAO)-induced metallization of gold nanorods (Au NRs). Ascorbic acid (AA) can reduce silver ion (Ag⁺) to metal silver (Ag) that will be deposited on the surface of Au NRs, which results in the blue shift of longitudinal localized surface plasmon resonance (LSPR) peak of Au NRs, accompanying by perceptible color changes from red to cyan to red to yellow. In the presence of trichlorfon, the activity of AAO will be inhibited, resulting in less AA is hydrolyzed to dehydroascorbic acid (DHA), and therefore more Ag⁺ is reduced to Ag by AA. Under the optimized conditions, detection of trichlorfon has a wide linear range of 27.8-11111.1 μg/L with a limit of detection as low as 132.6 ng/L. Moreover, the sensor has a good sample spiked recovery (84.7-96.8%) for the determination of trichlorfon in lake water samples. The proposed method can achieve rapid analysis (about 10 min) of trichlorfon with simple operation when there are no other types of organophosphorus pesticides in the real samples.