Fueling the Future: The Emergence of Self-Powered Enzymatic Biofuel Cell Biosensors

Self-powered biosensors are innovative devices that can detect and analyze biological or chemical substances without the need for an external power source. These biosensors can convert energy from the surrounding environment or the analyte itself into electrical signals for sensing and data transmission. The self-powered nature of these biosensors offers several advantages, such as portability, autonomy, and reduced waste generation from disposable batteries. They find applications in various fields, including healthcare, environmental monitoring, food safety, and wearable devices. While self-powered biosensors are a promising technology, there are still challenges to address, such as improving energy efficiency, sensitivity, and stability to make them more practical and widely adopted. This review article focuses on exploring the evolving trends in self-powered biosensor design, outlining potential advantages and limitations. With a focal point on enzymatic biofuel cell power generation, this article describes various sensing mechanisms that employ the analyte as substrate or fuel for the biocatalyst's ability to generate current. Technical aspects of biofuel cells are also examined. Research and development in the field of self-powered biosensors is ongoing, and this review describes promising areas for further exploration within the field, identifying underexplored areas that could benefit from further investigation.

Hybrid Cas12a Variants with Relaxed PAM Requirements Expand Genome Editing Compatibility

Cas12a is a widely used programmable nuclease for genome editing across a variety of organisms, but its application is limited by its PAM recognition restriction. To alleviate these PAM constraints, protein engineering efforts have been applied to expand the PAM recognition range. In this study, we designed and constructed 990 synthetic hybrid Cas12a chimeras through domain shuffling and screened an efficient hybrid Cas12a (ehCas12a) that could recognize a broad range PAM of 5'-TYYN-3' (Y is T or C and N is A, T, C, or G). Furthermore, we constructed an ehCas12a variant, ehCas12a RRVR (T167R/N572R/K578V/N582R), with expanded PAM preference to 5'-TNYN, TWRV-3' (W is A or T, R is A or G, and V is A, C, or G), which can efficiently recognize -2* A/G PAMs that are barely recognized by Cas12a-type proteins and their mutants. Finally, we demonstrated that the DNase-inactivated ehCas12a RRVR base editor (dehCas12a RRVR-BE) was capable of targeting noncanonical PAMs in vivo and disease-related loci for potential therapeutic applications. Overall, our findings highlight the modular design and reconfiguration of Cas proteins for enhanced functionality.

Research Progress in Enzyme Biofuel Cells Modified Using Nanomaterials and Their Implementation as Self-Powered Sensors

Enzyme biofuel cells (EBFCs) can convert chemical or biochemical energy in fuel into electrical energy, and therefore have received widespread attention. EBFCs have advantages that traditional fuel cells cannot match, such as a wide range of fuel sources, environmental friendliness, and mild reaction conditions. At present, research on EBFCs mainly focuses on two aspects: one is the use of nanomaterials with excellent properties to construct high-performance EBFCs, and the other is self-powered sensors based on EBFCs. This article reviews the applied nanomaterials based on the working principle of EBFCs, analyzes the design ideas of self-powered sensors based on enzyme biofuel cells, and looks forward to their future research directions and application prospects. This article also points out the key properties of nanomaterials in EBFCs, such as electronic conductivity, biocompatibility, and catalytic activity. And the research on EBFCs is classified according to different research goals, such as improving battery efficiency, expanding the fuel range, and achieving self-powered sensors.

An ingenious designed dual mode self-powered biosensing platform based on graphdiyne heterostructure substrate for instant hepatocarcinoma marker detection

We report here for the first time a self-powered biosensing platform based on graphene/graphdiyne/graphene (GDY-Gr) heterostructure substrate material for ultrasensitive hepatocarcinoma marker (microRNA-21) detection in both electrochemical and colorimetric test modes. The dual-mode signal intuitively displayed on a smartphone fundamentally improves the detection accuracy. In electrochemical mode, the calibration curve is established in the linear range of 0.1-10000 fM, and the detection limit is as low as 0.333 fM (S/N = 3). Simultaneously, colorimetric analysis of the miRNA-21 is realized by using ABTS as an indicator. The detection limit is confirmed as 32 fM (S/N = 3), and miRNA-21 of concentration from 0.1 pM to 1 nM exhibit a linear relationship with R2 = 0.9968. Overall, the combination of GDY-Gr and multiple signal amplification strategy significantly improved the sensitivity by 310 times compared with traditional enzymatic biofuel cells (EBFCs) based detection platform, showing broad application prospects for on-site analysis and future mobile medical services.

Synthetic biology promotes the capture of CO2 to produce fatty acid derivatives in microbial cell factories

Environmental problems such as greenhouse effect, the consumption of fossil energy, and the increase of human demand for energy are becoming more and more serious, which force researcher to turn their attention to the reduction of CO2 and the development of renewable energy. Unsafety, easy to lead to secondary environmental pollution, cost inefficiency, and other problems limit the development of conventional CO2 capture technology. In recent years, many microorganisms have attracted much attention to capture CO2 and synthesize valuable products directly. Fatty acid derivatives (e.g., fatty acid esters, fatty alcohols, and aliphatic hydrocarbons), which can be used as a kind of environmentally friendly and renewable biofuels, are sustainable substitutes for fossil energy. In this review, conventional CO2 capture techniques pathways, microbial CO2 concentration mechanisms and fixation pathways were introduced. Then, the metabolic pathway and progress of direct production of fatty acid derivatives from CO2 in microbial cell factories were discussed. The synthetic biology means used to design engineering microorganisms and optimize their metabolic pathways were depicted, with final discussion on the potential of optoelectronic-microbial integrated capture and production systems.

Helical versus Flat Bis-Ferrocenyl End-Capped Peptides: The Influence of the Molecular Skeleton on Redox Properties

Despite the fact that peptide conjugates with a pendant ferrocenyl (Fc) have been widely investigated, bis-ferrocenyl end-capped peptides are rarely synthetized. In this paper, in addition to the full characterization of the Fc-CO-[L-Dap(Boc)]n-NH-Fc series, we report a comparison of the three series of bis-ferrocenyl homopeptides synthesized to date, to gain insights into the influence of α-amino isobutyric (Aib), 2,3-diamino propionic (Dap) and Cα,β-didehydroalanine (ΔAla) amino acids on the peptide secondary structure and on the ferrocene redox properties. The results obtained by 2D NMR analysis and X-ray crystal structures, and further supported by electrochemical data, evidence different behaviors depending on the nature of the amino acid; that is, the formation of 310-helices or fully extended (2.05-helix) structures. In these foldamers, the orientation of the carbonyl groups in the peptide helix yields a macrodipole with the positive pole on the N-terminal amino acid and the negative pole on the C-terminal amino acid, so that oxidation of the Fc moieties takes place more or less easily depending on the orientation of the macrodipole moment as the peptide chain grows. Conversely, the fully extended conformation adopted by ΔAla flat peptides neither generates a macrodipole nor affects Fc oxidation. The utilization as electrochemical and optical (Circular Dichroism) probes of the two terminal Fc groups, bound to the same peptide chain, makes it possible to study the end-to-end effects of the positive charges produced by single and double oxidations, and to evidence the presence "exciton-coupled" CD among the two intramolecularly interacting Fc groups of the L-Dap(Boc) series.

Powering smart contact lenses for continuous health monitoring: Recent advancements and future challenges

As the tear is noninvasively and continuously available, it has been turned into a convenient biological interface as a wearable medical device for out-of-hospital and self-monitoring applications. Recent progress in integrated circuits (ICs) and biosensors coupled with wireless data communication techniques have led to the implementation of smart contact lenses that can continuously sample tear fluid, analyze physiological conditions, and wirelessly transmit data to an electronic device such as smartphone, which can send data to relevant healthcare units. Continuous analyte monitoring is one of the significant characteristics of wearable biosensors. However, despite several advantages over other on-skin wearable medical devices, batteries cannot be incorporated on smart contact lenses for continuous electrical power supply due to the limited area. Herein, we review the progress of power delivery techniques of smart contact lenses for the first time. Different approaches, including wireless power transmission (WPT), biofuel cells, supercapacitors, flexible batteries, wired connections, and hybrid methods, are thoroughly discussed to understand the principles of self-sustainable contact lens biosensors comprehensively. Additionally, recent progress in contact lens biosensors is reviewed in detail, thereby providing the prospects for further developments of smart contact lenses as a common biosensing platform for various disease monitoring and diagnostic applications.

Bioelectricity production from sweat-activated germination of bacterial endospores

A microbial fuel cell is created that uses a bacterium's natural ability to revive from dormancy to provide on-demand power for next-generation wearable applications. In adverse conditions, Bacillus subtilis responds by becoming endospores that serve as a dormant biocatalyst embedded in a skin-mountable paper-based microbial fuel cell. When activated by nutrient-rich human sweat, the germinating bacteria produce enough electricity to operate small devices, such as the calculator that we operated to test our methodology. The spore germination is artificially accelerated by nutritious germinants, which are pre-loaded on the skin-contacting bottom layer of the device, absorb the released sweat, and deliver a mixture of the dissolved germinants and sweat to the spores. When the skin-mountable device is applied to the arm of a sweating volunteer, it can generate a maximum power density of 16.6 μW/cm2 through bacterial respiratory activity. A potential risk of bacteria leakage from the device is minimized by packaging with a small pore size paper so that bacterial spores and germinated cells cannot pass through. When three serially connected devices are integrated into a single on-chip platform and energized by sweat, a significantly enhanced power density of 56.6 μW/cm2 is generated, powering an electrical calculator. After three weeks of dormant storage, the device exhibits no significant decrease in electrical output when activated by sweat. After use, the device is easily incinerated without risking bacterial infection. This work demonstrates the promising potential of the spore-forming microbial fuel cell as a disposable and long storage life power source for next-generation wearable applications.

Rational design of electroactive redox enzyme nanocapsules for high-performance biosensors and enzymatic biofuel cell

The potential application of biodevices based on enzymatic bioelectrocatalysis are limited by poor stability and electrochemical performance. To solve the limitation, modifying enzyme with functional polymer to tailor enzyme function is highly desirable. Herein, glucose oxidase (GOx) was chosen as a model enzyme, and according to the chemical structure of GOx cofactor (flavin adenine dinucleotide, FAD), we customize a biomimetic cofactor containing vinyl group (SFAD) for GOx, and prepared an GOx nanocapsule via in-situ polymerization. The characterization of particle size distribution, TEM, fluorescence and electrochemical performance indicated the successful formation of electroactive GOx nanocapsule with SFAD-containing polymeric network (n (GOx-SFAD-PAM)). The network can act as an electronic "highway" to link the active site with electrode, with capability to accelerate electron transfer as well as enhanced GOx stability. Further investigation of bioelectrocatalysis shows that n (GOx-SFAD-PAM)-based biosensor has low detection potential (-0.4 vs. Ag/AgCl), high sensitivity (64.97 μAmM^-1cm^-2), good anti-interference performance, quick response (3⁓5s) and excellent stability, and that n (GOx-SFAD-PAM)-based enzymatic biofuel cell (EBFC) has the high maximum power density (1011.21 μWcm^-2), which is a 385-fold increase over that of native GOx-based EBFC (2.62 μWcm^-2). This study suggests that novel enzyme nanocapsule with electroactive polymeric shell might provide a prospective solution for the performance improvement of enzymatic bioelectrocatalysis-based biodevices.