Modified nucleoside triphosphates in bacterial research for in vitro and live-cell applications

Comparison of pre-labelled primers and nucleotides as DNA labelling method for lateral flow detection of Legionella pneumophila amplicons

Labelling of nucleic acid amplicons during polymerase chain reaction (PCR) or isothermal techniques is possible by using both labelled primers and labelled nucleotides. While the former is the widely used method, the latter can offer significant advantages in terms of signal enhancement and improving the detection limit of an assay. Advantages and disadvantages of both methods depend on different factors, including amplification method, detection method and amplicon length. In this study, both methods for labelling PCR products for lateral flow assay (LFA) analysis (LFA-PCR) were analysed and compared. It was shown that labelling by means of nucleotides results in an increase in label incorporation rates. Nonetheless, this advantage is negated by the need for post-processing and competitive interactions. In the end, it was possible to achieve a detection limit of 3 cell equivalents for the detection of the Legionella-DNA used here via primer labelling. Labelling via nucleotides required genomic DNA of at least 3000 cell equivalents as starting material as well as an increased personnel and experimental effort.

Ionophore-Based Polymeric Sensors for Potentiometric Assay of the Anticancer Drug Gemcitabine in Pharmaceutical Formulation: A Comparative Study

Gemcitabine is a chemotherapeutic agent used to treat various malignancies, including breast and bladder cancer. In the current study, three innovative selective gemcitabine hydrochloride sensors are developed using 4-tert-butylcalix-[8]-arene (sensor 1), β-cyclodextrin (sensor 2), and γ-cyclodextrin (sensor 3) as ionophores. The three sensors were prepared by incorporating the ionophores with o-nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl) borate as ionic additive into a polyvinyl chloride polymer matrix. These sensors are considered environmentally friendly systems in the analytical research. The linear responses of gemcitabine hydrochloride were in the concentration range of 6.0 × 10-6 to 1.0 × 10-2 mol L-1 and 9.0 × 10-6 to 1.0 × 10-2 mol L-1 and 8.0 × 10-6 to 1.0 × 10-2 mol L-1 for sensors 1, 2, and 3, respectively. Over the pH range of 6-9, fast-Nernst slopes of 52 ± 0.6, 56 ± 0.3, and 55 ± 0.8 mV/decade were found in the same order with correlation regressions of 0.998, 0.999, and 0.998, respectively. The lower limits of detection for the prepared sensors were 2.5 × 10-6, 2.2 × 10-6, and 2.7 × 10-6 mol L-1. The sensors showed high selectivity and sensitivity for gemcitabine. Validation of the sensors was carried out in accordance with the requirements established by the IUPAC, while being inexpensive and easy to use in drug formulation. A statistical analysis of the methods in comparison with the official method showed that there was no significant difference in accuracy or precision between them. It was shown that the new sensors could selectively and accurately find gemcitabine hydrochloride in bulk powder, pharmaceutical formulations, and quality control tests. The ionophore-based sensor shows several advantages over conventional PVC membrane sensor sensors regrading the lower limit of detection, and higher selectivity towards the target ion.

Cationic Polymers Enable Internalization of Negatively Charged Chemical Probes into Bacteria

The bacterial cell envelope provides a protective barrier that is challenging for small molecules and biomolecules to cross. Given the anionic nature of both Gram-positive and Gram-negative bacterial cell envelopes, negatively charged molecules are particularly difficult to deliver into these organisms. Many strategies have been employed to penetrate bacteria, ranging from reagents such as cell-penetrating peptides, enzymes, and metal-chelating compounds to physical perturbations. While cationic polymers are known antimicrobial agents, polymers that promote the permeabilization of bacterial cells without causing high levels of toxicity and cell lysis have not yet been described. Here, we investigate four polymers that display a cationic poly(2-(dimethylamino)ethyl methacrylate (D) block for the internalization of an anionic adenosine triphosphate (ATP)-based chemical probe into Escherichia coli and Bacillus subtilis. We evaluated two polymer architectures, linear and micellar, to determine how shape and hydrophobicity affect internalization efficiency. We found that, in addition to these reagents successfully promoting probe internalization, the probe-labeled cells were able to continue to grow and divide. The micellar structures in particular were highly effective for the delivery of the negatively charged chemical probe. Finally, we demonstrated that these cationic polymers could act as general permeabilization reagents, promoting the entry of other molecules, such as antibiotics.

Synthetic Biology Pathway to Nucleoside Triphosphates for Expanded Genetic Alphabets

One horizon in synthetic biology seeks alternative forms of DNA that store, transcribe, and support the evolution of biological information. Here, hydrogen bond donor and acceptor groups are rearranged within a Watson-Crick geometry to get 12 nucleotides that form 6 independently replicating pairs. Such artificially expanded genetic information systems (AEGIS) support Darwinian evolution in vitro. To move AEGIS into living cells, metabolic pathways are next required to make AEGIS triphosphates economically from their nucleosides, eliminating the need to feed these expensive compounds in growth media. We report that "polyphosphate kinases" can be recruited for such pathways, working with natural diphosphate kinases and engineered nucleoside kinases. This pathway in vitro makes AEGIS triphosphates, including third-generation triphosphates having improved ability to survive in living bacterial cells. In α-32P-labeled forms, produced here for the first time, they were used to study DNA polymerases, finding cases where third-generation AEGIS triphosphates perform better with natural enzymes than second-generation AEGIS triphosphates.

Screening the Thermotoga maritima genome for new wide-spectrum nucleoside and nucleotide kinases

Enzymes from thermophilic organisms are interesting biocatalysts for a wide variety of applications in organic synthesis, biotechnology and molecular biology. Next to an increased stability at elevated temperatures, they were described to show a wider substrate spectrum than their mesophilic counterparts. To identify thermostable biocatalysts for the synthesis of nucleotide analogs, we performed a database search on the carbohydrate and nucleotide metabolism of T. maritima. After expression and purification of 13 enzyme candidates involved in nucleotide synthesis, these enzymes were screened for their substrate scope. We found that the synthesis of 2'-deoxynucleoside 5'-monophosphates (dNMPs) and uridine 5'-monophosphate from nucleosides was catalyzed by the already known wide-spectrum thymidine kinase (TK) and the ribokinase. In contrast, no NMP-forming activity was detected for adenosine-specific kinase, uridine kinase or nucleotidase. The NMP kinases (NMPKs) and the pyruvate-phosphate-dikinase of T. maritima exhibited a rather specific substrate spectrum for the phosphorylation of NMPs, while pyruvate kinase, acetate kinase and three of the NMPKs showed a broad substrate scope with (2'-deoxy)nucleoside 5'-diphosphates as substrates. Based on these promising results, TmNMPKs were applied in enzymatic cascade reactions for nucleoside 5'-triphosphate synthesis using four modified pyrimidine nucleosides and four purine NMPs as substrates, and we determined that base- and sugar-modified substrates were accepted. In summary, besides the already reported TmTK, NMPKs of T. maritima were identified to be interesting enzyme candidates for the enzymatic production of modified nucleotides.

From polymerase engineering to semi-synthetic life: artificial expansion of the central dogma

Nucleic acids have been extensively modified in different moieties to expand the scope of genetic materials in the past few decades. While the development of unnatural base pairs (UBPs) has expanded the genetic information capacity of nucleic acids, the production of synthetic alternatives of DNA and RNA has increased the types of genetic information carriers and introduced novel properties and functionalities into nucleic acids. Moreover, the efforts of tailoring DNA polymerases (DNAPs) and RNA polymerases (RNAPs) to be efficient unnatural nucleic acid polymerases have enabled broad application of these unnatural nucleic acids, ranging from production of stable aptamers to evolution of novel catalysts. The introduction of unnatural nucleic acids into living organisms has also started expanding the central dogma in vivo. In this article, we first summarize the development of unnatural nucleic acids with modifications or alterations in different moieties. The strategies for engineering DNAPs and RNAPs are then extensively reviewed, followed by summarization of predominant polymerase mutants with good activities for synthesizing, reverse transcribing, or even amplifying unnatural nucleic acids. Some recent application examples of unnatural nucleic acids with their polymerases are then introduced. At the end, the approaches of introducing UBPs and synthetic genetic polymers into living organisms for the creation of semi-synthetic organisms are reviewed and discussed.

Chemical modifications for a next generation of nucleic acid aptamers

In the past three decades, in vitro systematic evolution of ligands by exponential enrichment (SELEX) has yielded many aptamers for translational applications in both research and clinical settings. Despite their promise as an alternative to antibodies, the low success rate of SELEX (~ 30%) has been a major bottleneck that hampers the further development of aptamers. One hurdle is the lack of chemical diversity in nucleic acids. To address this, the aptamer chemical repertoire has been extended by introducing exotic chemical groups, which provide novel binding functionalities. This review will focus on how modified aptamers can be selected and evolved, with illustration of some successful examples. In particular, unique chemistries are exemplified. Various strategies of incorporating modified building blocks into the standard SELEX protocol are highlighted, with a comparison of the differences between pre-SELEX and post-SELEX modifications. Nucleic acid aptamers with extended functionality evolved from non-natural chemistries will open up new vistas for function and application of nucleic acids.

Activity-based ATP analog probes for bacterial histidine kinases

Histidine kinases (HKs) are sensor proteins found ubiquitously in prokaryotes. They are the first protein in two-component systems (TCSs), signaling pathways that respond to a myriad of environmental stimuli. TCSs are typically comprised of a HK and its cognate response regulator (RR) which often acts as a transcription factor. RRs will bind DNA and ultimately lead to a cellular response. These cellular outputs vary widely, but HKs are particularly interesting as they are tied to antibiotic resistance and virulence pathways in pathogenic bacteria, making them promising drug targets. We anticipate that HK inhibitors could serve as either standalone antibiotics or antivirulence therapies. Additionally, while the cellular response mediated by the HKs is often well-characterized, very little is known about which stimuli trigger the sensor kinase to begin the phosphorylation cascade. Studying HK activity and enrichment of active HKs through activity-based protein profiling will enable these stimuli to be elucidated, filling this fundamental gap in knowledge. Here, we describe methods to evaluate the potency of putative HK inhibitors in addition to methods to calculate kinetic parameters of various activity-based probes designed for the HKs.

Chemical Biology Tools for Modulating and Visualizing Gram-Negative Bacterial Surface Polysaccharides

Bacterial cells present a wide diversity of saccharides that decorate the cell surface and help mediate interactions with the environment. Many Gram-negative cells express O-antigens, which are long sugar polymers that makeup the distal portion of lipopolysaccharide (LPS) that constitutes the surface of the outer membrane. This review highlights chemical biology tools that have been developed in recent years to facilitate the modulation of O-antigen synthesis and composition, as well as related bacterial polysaccharide pathways, and the detection of unique glycan sequences. Advances in the biochemistry and structural biology of O-antigen biosynthetic machinery are also described, which provide guidance for the design of novel chemical and biomolecular probes. Many of the tools noted here have not yet been utilized in biological systems and offer researchers the opportunity to investigate the complex sugar architecture of Gram-negative cells.

Towards the enzymatic synthesis of phosphorothioate containing LNA oligonucleotides

Therapeutic oligonucleotides require the addition of multiple chemical modifications to the nucleosidic scaffold in order to improve their drug delivery efficiency, cell penetration capacity, biological stability, and pharmacokinetic properties. This chemical modification pattern is often accompanied by a synthetic burden and by limitations in sequence length. Here, we have synthesized a nucleoside triphosphate analog bearing two simultaneous modifications at the level of the sugar (LNA) and the backbone (thiophosphate) and have tested its compatibility with enzymatic DNA synthesis which could abrogate some of these synthetic limitations. While this novel analog is not as well tolerated by polymerases compared to the corresponding α-thio-dTTP or LNA-TTP, α -thio-LNA-TTP can readily be used for enzymatic synthesis on universal templates for the introduction of phosphorothioated LNA nucleotides.

Recent progress in non-native nucleic acid modifications

While Nature harnesses RNA and DNA to store, read and write genetic information, the inherent programmability, synthetic accessibility and wide functionality of these nucleic acids make them attractive tools for use in a vast array of applications.