A magnetic CoRu-CoOX nanocomposite efficiently hydrogenates furfural to furfuryl alcohol at ambient H2 pressure in water

Low-Temperature Catalytic Transfer Hydrogenation of Biomass-Derived Furfural over Irreversibly Adsorbed and Highly Dispersed Zr(IV) Species

Developing pure inorganic catalysts for low-energy transfer hydrogenation of biomass-derived furfural and alcohols below 100 °C is still challenging. This work reports highly dispersed Zr(IV) species catalysts prepared by irreversible adsorption of different solvent-dissolved Zr(IV) cations such as Zr4+ or [Zr4(OH)8(H2O)16]8+ on/in SBA-15 through Zr-O coordination, without adding an alkaline precipitant and calcination treatment. In the transfer hydrogenation of furfural to furfuryl alcohol, the Zr(IV) species catalysts exhibited unexpectedly outstanding transfer hydrogenation activity at low temperatures of 70 and 85 °C, superior to other transition-metal (Zr4+, Hf4+, Fe3+, etc.)- and main-group metal (Al3+, etc.)-based inorganic catalysts, which need high reaction temperatures above 100 °C, and comparable to the best-performing metal-organic hybrid catalysts with precise defect engineering modification or specific macromolecular ligands, and had negligible Zr leaching amounts (<0.01%) in water and in the collected liquid reaction medium from 7 cycles of reactions. In addition, the large strong Lewis acidic site amount rather than the large total acidic amount is a crucial condition for the catalysts to obtain high transfer hydrogenation activity, and basic sites were also involved in catalysis, and their absence would induce the acetalization side reaction. Furthermore, the catalysts were universal for low-temperature transfer hydrogenation of other aldehydes.

Nitrogen-doped ordered mesoporous carbon supported ruthenium metallic nanoparticles: Opportunity for efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran by catalytic transfer hydrogenation

One of the most promising solutions to the current energy crisis is an efficient catalytic transformation of abundant low-cost renewable raw biomass into high-quality biofuel. Herein, a highly effective catalyst was constructed systematically for the selective synthesis of 2,5-dimethylfuran (DMF) biofuel from biomass-derived 5-hydroxymethylfurfural (HMF) via green catalytic transfer hydrogenolysis (CTH) using a nitrogen-doped ordered mesoporous carbon (N-CMK-1) decorated ruthenium (Ru)-based catalyst in i-propanol as hydrogen source. The structures and properties of different catalysts were characterized by different characterization techniques such as FTIR, XRD, N2-sorption, CO2-sorption, TGA, TEM, ICP-AES, CHNO analysis, and acid-base back titration. A complete HMF conversion with a high DMF yield of 88% was achieved under optimized reaction conditions. Regarding substrate conversion and product yield, the influence of reaction temperature, time, and hydrogen donors was thoroughly investigated. The nitrogen-promoted carbon support enhanced the dispersion of Ru due to the formation of appropriate basic site density which could efficiently promote the activation of alcohol hydroxyl in i-propanol and subsequent release of active hydrogen species. In the meantime, highly dispersed surface Ru nanoparticles (NPs) were beneficial for hydrogen transfer and activation of both carbonyl and hydroxyl groups in HMF. Moreover, Arrhenius kinetic analysis was studied by identifying 5-methyl furfural (5-MF) and 2,5-bishydroxymethylfuran (BHMF) as two key intermediates that dominate a distinct reaction pathway during hydrogenolysis of HMF to DMF via CTH. Furthermore, high stability without obvious loss of activity after three consecutive cycles was observed in a fabricated N-CMK-1 decorated Ru-based catalyst as a result of superior metal-support interaction and the mesoporous framework nature of the catalyst. These findings would not only offer a robust catalyst synthetic approach but also open a new avenue for the exploitation of biomass to specialty chemicals and advanced biofuels.

Enhancing the catalytic performance of Co-N-C derived from ZIF-67 by mesoporous silica encapsulation for chemoselective hydrogenation of furfural

Developing Cr-free and non-noble metal catalysts with high activity, selectivity and durability for chemoselective hydrogenation of furfural to furfuryl alcohol is highly desirable yet challenging. In this study, we design a hollow mesoporous Co-N-C@mSiO₂ nanostructure derived from ZIF-67 via the encapsulation-pyrolysis strategy. The Co-N-C@mSiO₂ catalyst exhibits excellent catalytic performance in the furfural hydrogenation towards furfuryl alcohol with good stability, and is much better than the Co-N-C catalyst originating from plain ZIF-67 and other reported transition metal catalysts. Characterization methods and control experiments show that Co-N_x species rather than Co metal should be catalytically active sites for the above reaction. The enhanced performance is associated with abundant Co-N_x active sites, good mass transport, and the SiO₂ shell protection. This work provides a novel and facile strategy for preparing highly efficient non-precious metal catalysts to replace Cr-based and noble metal catalysts for furfural hydrogenation.

Recent advances on bifunctional catalysts for one-pot conversion of furfural to γ-valerolactone

γ-Valerolactone (GVL) is one of the most valuable compounds derived from furfural (FAL), which has been industrially produced from agricultural byproducts like corn cobs. It is extremely challenging to synthesize GVL from FAL efficiently via a one-pot cascade reaction due to the need for multiple active sites in a single pot. By focusing on the aspects of one-pot synthesis of GVL from FAL, the authors aim to shed light on the rational design and utilization of environmentally friendly bifunctional catalysts with high efficiency in this reaction. Perspectives regarding future research opportunities in bi- or multi-functional catalysts for one-pot GVL synthesis are also discussed.

One-pot synthesis of finely-dispersed Au nanoparticles on ZnO hexagonal sheets for base-free aerobic oxidation of vanillyl alcohol

Highly-dispersed and small-sized Au (2.2 nm)/ZnO catalyst was prepared using metal ions and 2-methylimidazole by one-pot coordination–calcination method, and showed superior performances for vanillin synthesis via base-free oxidation.

Density Functional Investigation of the Conversion of Furfural to Furfuryl Alcohol by Reaction with i-Propanol over UiO-66 Metal-Organic Framework

Carbonyl C═O bond reduction via catalytic transfer hydrogenation (CTH) is one of the essential processes for biomass conversion to valuable chemicals and fuels. Here, we investigate the CTH of furfural to furfuryl alcohol with i-propanol on UiO-66 metal-organic frameworks using density functional theory calculations and linear scaling relations. Initially, the reaction over two defect sites presented on Zr-UiO-66, namely, dehydrated and hydrated sites, have been compared. The hydrated active site is favored over that on the dehydrated active site since the activation free energy of the rate-determining reaction step occurring on the hydrated active site is lower than that occurring on the dehydrated active site (14.9 vs 17.9 kcal/mol). The catalytic effect of exchanged tetravalent metals (Hf and Ti) on Zr-UiO-66 is also considered. We found that Hf-UiO-66 (13.5 kcal/mol) provides a lower activation energy than Zr-UiO-66 (14.9 kcal/mol) and Ti-UiO-66 (19.4 kcal/mol), which corresponds to it having a higher Lewis acidity. The organic linkers of UiO-66 MOFs play a role in stabilizing all of the species on potential energy surfaces. The linear scaling relationship also reveals the significant role of the UiO-66 active site in activating the carbonyl C═O of furfural, and strong relationships are observed between the activation free energy, the charge of the metal at the MOF active sites, and the complexation energies in reaction coordinates.

Efficient hydrogenation of 5-hydroxymethylfurfural using a synergistically bimetallic Ru-Ir/C catalyst

Activated charcoal-dispersed Ru-Ir alloy nanoparticles (ca. 2.2 nm) are a selective and reusable hydrogenation catalyst for the conversion of 5-hydroxymethylfurfural to valuable liquid biofuel. A 99% yield to 2,5-dimethylfuran is achieved at only 120 °C. An acceleration in the reduction of substrate and intermediates is observed due to the synergistic effect between the Ru and Ir species.

Efficient Imine Formation by Oxidative Coupling at Low Temperature Catalyzed by High-Surface-Area Mesoporous CeO2 with Exceptional Redox Property

High-surface-area mesoporous CeO₂ (hsmCeO₂ ) was prepared by a facile organic-template-induced homogeneous precipitation process and showed excellent catalytic activity in imine synthesis in the absence of base from primary alcohols and amines in air atmosphere at low temperature. For comparison, ordinary CeO₂ and hsmCeO₂ after different thermal treatments were also investigated. XRD, N₂ physisorption, UV-Raman, H₂ temperature-programmed reduction, O₂ temperature-programmed desorption, EPR spectroscopy, and X-ray photoelectron spectroscopy were used to unravel the structural and redox properties. The hsmCeO₂ calcined at 400 °C shows the highest specific surface area (158 m²  g^-1 ), the highest fraction of surface coordinatively unsaturated Ce³⁺ ions (18.2 %), and the highest concentration of reactive oxygen vacancies (2.4×10¹⁵  spins g^-1 ). In the model reaction of oxidative coupling of benzyl alcohol and aniline, such an exceptional redox property of the hsmCeO₂ catalyst can boost benzylideneaniline formation (2.75 and 5.55 mmol  g ceria - 1  h^-1 based on >99 % yield at 60 and 80 °C, respectively) in air with no base additives. It can also work effectively at a temperature of 30 °C and in gram-scale synthesis. These are among the best results for all benchmark ceria catalysts in the literature. Moreover, the hsmCeO₂ catalyst shows a wide scope towards primary alcohols and amines with good to excellent yield of imines. The influence of reaction parameters, the reusability of the catalyst, and the reaction mechanism were investigated.

Sustainable synthesis of vanillin through base-free selective oxidation using synergistic AgPd nanoparticles loaded on ZrO2

Sustainable synthesis of vanillin was realized over a synergistic AgPd/ZrO2 catalyst through the base-free selective oxidation of vanillyl alcohol.