Protein patterning with antifouling polymer gel platforms generated using visible light irradiation

Three-Color Protein Photolithography with Green, Red, and Far-Red Light

Protein photolithography is an invaluable tool for generating protein microchips and regulating interactions between cells and materials. However, the absence of light-responsive molecules that allow for the copatterning of multiple functional proteins with biocompatible visible light poses a significant challenge. Here, a new approach for photopatterning three distinct proteins on a single surface by using green, red, and far-red light is reported. The cofactor of the green light-sensitive protein CarH is engineered such that it also becomes sensitive to red and far-red light. These new cofactors are shown to be compatible with two CarH-based optogenetic tools to regulate bacterial cell-cell adhesions and gene expression in mammalian cells with red and far-red light. Further, by incorporating different CarH variants with varying light sensitivities in layer-by-layer (LbL) multiprotein films, specific layers within the films, along with other protein layers on top are precisely removed by using different colors of light, all with high spatiotemporal accuracy. Notably, with these three distinct colors of visible light, it is possible to incorporate diverse proteins under mild conditions in LbL films based on the reliable interaction between Ni2+- nitrilotriacetic acid (NTA) groups and polyhistidine-tags (His-tags)on the proteins and their subsequent photopatterning. This approach has potential applications spanning biofabrication, material engineering, and biotechnology.

In Vitro Performance of a Long-Range Surface Plasmon Hydrogel Aptasensor for Continuous and Real-Time Vancomycin Measurement in Human Serum

This study investigated the suitability of surface modification for a long-range surface plasmon (LRSP) aptasensor using two different hydrogels, aiming at real-time monitoring of vancomycin (VCM) in undiluted serum and blood. Three different layer structures were formed on a gold surface of LRSP sensor chip using poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-co-N-methacryloyl-(L)-tyrosinemethylester (MAT)] (PMM) and poly[MPC-co-2-ethylhexyl methacrylate (EHMA)-co-MAT] (PMEM). The peptide aptamer for VCM was immobilized in PMM and PMEM via MAT. Among four differently prepared sensor chips, the LRSP hydrogel aptasensor with PMM, referred to as the PMM hydrogel, exhibited the highest sensor output and superior antifouling properties. Following the optimization of the PMM hydrogel preparation conditions, the shelf life of the PMM hydrogel was determined to exceed 2 weeks, and the same sensor chip could be used for 102 days without significant performance deterioration. The PMM hydrogel was then applied for VCM measurement in undiluted serum in vitro, where it demonstrated a limit of detection of 0.098 μM and a dynamic range of 0.18-100 μM, covering the therapeutic range. Additionally, the PMM hydrogel enabled the continuous measurement of various VCM concentrations in serum without rinsing and showed a concentration-dependent output in undiluted blood. These findings underscore the potential of the PMM hydrogel for real-time and direct monitoring of VCM in body fluids.

Zwitterionic hydrogel for preserving stability and activity of oxidase enzyme for electrochemical biosensor

Enzymatic electrochemical biosensor is the most common analytical platform for medical diagnosis. To mimic the biological environment of the enzyme for maintaining the function of biosensor, zwitterionic hydrogels have been recognized as effective matrices for enzymatic immobilization. Herein, a zwitterionic hydrogel derived from a copolymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-co-N-methacryloyloxyethyl tyrosine methylester (MAT)] (PMM) was firstly applied as versatile coating to preserve stability and activity of oxidase enzymes, glucose oxidase (GOx) and lactate oxidase (LOx) for enzymatic electrochemical sensor. A screen-printed carbon electrode (SPCE) was sequentially coated with nitrogen-doped graphene (NDG), oxidase enzyme, and PMM mixed with Ru(II)bpy32+ and (NH4)2S2O8 followed by visible light irradiation for 3 min to induce PMM gelation. Electrochemical detection of glucose and lactate using the modified SPCE was performed via amperometry in the presence of hydrogen peroxide. The activity of both GOx and LOx immobilized on the modified SPCE was well maintained for 49 days at 87 and 80 %, respectively. Additionally, two different electrodes, a screen-printed graphene electrode (SPGE), and a screen-printed silver electrode (SPAgE), similarly modified gave the same satisfactory detection of spiked glucose and lactate in human plasma and sweat with 93-118 % recovery. This indicates the potential of the PMM hydrogel as a universal platform for preservation of enzymes which can be easily fabricated without the need for specific chemical modification of the electrode.

Fabrication of Silver Iodide (AgI) Patterns via Photolithography and Its Application to In-Situ Observation of Condensation Frosting

This study introduces an innovative photolithography-based method for patterning ionic and inorganic particle materials such as silver iodide (AgI). Conventional methods lack precision when patterning powdered materials, which limits their applicability. The proposed method stacks layers of a particle material (AgI) and negative-tone photoresist for simultaneous ultraviolet exposure and development, resulting in well-defined AgI patterns. The sintering process successfully removed binders from the material layer and photoresist, yielding standalone AgI patterns on the Si substrate with good adhesion. The pitch remained consistent with the design values of the photomask when the pattern size was changed. In-situ observation of condensation frosting on the patterns was conducted, which confirmed the practicality of the developed patterning process. This versatile method is applicable to large areas with a high throughput and presents new opportunities for modifying functional surfaces.

Photoassisted Surface Modification with Zwitterionic Phosphorylcholine Polymers for the Fabrication of Ideal Biointerfaces

Surface modification using zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers is commonly performed to fabricate interfaces that reduce nonspecific fouling by biomolecules and cells. Accordingly, several clinically used devices, such as guide wires, stents, oxygenators, left ventricular assist devices, and microcatheters have been modified using MPC polymers. The specific types of surface modifications vary across substrates and applications. Recently, photoreactions have garnered attention for surface modification due to their stability and tunability. This review highlights various studies that employed photoreactions to modify surfaces using MPC polymers, especially photoinduced graft polymerization of MPC. In addition to antifouling materials, several micromanipulated, long-lasting hydrophilic, and super antiwear surfaces are summarized. Furthermore, several photoreactive MPC polymers that can be used to control interactions between biomolecules and materials are presented along with their potential to form selective recognition surfaces that target biomolecules for biosensors and diagnostic devices.

Emerging Phospholipid Nanobiomaterials for Biomedical Applications to Lab-on-a-Chip, Drug Delivery, and Cellular Engineering

The design of advanced nanobiomaterials to improve analytical accuracy and therapeutic efficacy has become an important prerequisite for the development of innovative nanomedicines. Recently, phospholipid nanobiomaterials including 2-methacryloyloxyethyl phosphorylcholine (MPC) have attracted great attention with remarkable characteristics such as resistance to nonspecific protein adsorption and cell adhesion for various biomedical applications. Despite many recent reports, there is a lack of comprehensive review on the phospholipid nanobiomaterials from synthesis to diagnostic and therapeutic applications. Here, we review the synthesis and characterization of phospholipid nanobiomaterials focusing on MPC polymers and highlight their attractive potentials for applications in micro/nanofabricated fluidic devices, biosensors, lab-on-a-chip, drug delivery systems (DDSs), COVID-19 potential usages for early diagnosis and even treatment, and artificial extracellular matrix scaffolds for cellular engineering.

Controlled biointerfaces with biomimetic phosphorus-containing polymers

Phosphorus is a ubiquitous and one of the most common elements found in living organisms. Almost all molecules containing phosphorus in our body exist as analogs of phosphate salts or phosphoesters. Their functions are versatile and important, being responsible for forming the genetic code, cell membrane, and mineral components of hard tissue. Several materials inspired from these phosphorus-containing biomolecules have been recently developed. These materials have shown unique properties at the biointerface, such as nonfouling ability, blood compatibility, lubricity, mineralization induction capability, and bone affinity. Several unfavorable events occur at the interface of materials and living organisms because most of these materials have not been designed while taking host responses into account. These unfavorable events are directly linked to reducing functions and shorten the usable periods of medical devices. Biomimetic phosphorus-containing polymers can improve the reliability of materials in biological systems. In addition, phosphorus-containing biomimetic polymers are useful not only for improving the biocompatibility of material surfaces but also for adding new functions due to the flexibility in molecular design. In this review, we describe the recent advances in the control of biointerfacial phenomena with phosphorus-containing polymers. We especially focus on zwitterioninc phosphorylcholine polymers and polyphosphoesters.

Antifouling biosensors for reliable protein quantification in serum based on designed all-in-one branched peptides

Antifouling electrochemical biosensors based on designed all-in-one branched peptides that combine anchoring, doping, antifouling and recognizing functions were constructed to support sensitive and reliable protein quantification in complex serum samples.