Enhanced Capacitive Deionization of Hollow Mesoporous Carbon Spheres/MOFs Derived Nanocomposites by Interface-Coating and Space-Encapsulating Design

Exploring new carbon-based electrode materials is quite necessary for enhancing capacitive deionization (CDI). Here, hollow mesoporous carbon spheres (HMCSs)/metal-organic frameworks (MOFs) derived carbon materials (NC(M)/HMCSs and NC(M)@HMCSs) are successfully prepared by interface-coating and space-encapsulating design, respectively. The obtained NC(M)/HMCSs and NC(M)@HMCSs possess a hierarchical hollow nanoarchitecture with abundant nitrogen doping, high specific surface area, and abundant meso-/microporous pores. These merits are conducive to rapid ion diffusion and charge transfer during the adsorption process. Compared to NC(M)/HMCSs, NC(M)@HMCSs exhibit superior electrochemical performance due to their better utilization of the internal space of hollow carbon, forming an interconnected 3D framework. In addition, the introduction of Ni ions is more conducive to the synergistic effect between ZIF(M)-derived carbon and N-doped carbon shell compared with other ions (Mn, Co, Cu ions). The resultant Ni-1-800-based CDI device exhibits excellent salt adsorption capacity (SAC, 37.82 mg g-1) and good recyclability. This will provide a new direction for the MOF nanoparticle-driven assembly strategy and the application of hierarchical hollow carbon nanoarchitecture to CDI.

Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review

Due to the ultrahigh theoretical specific capacity (3860 mAh g-1) and low redox potential (-3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three-dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal-based current collectors and carbon-based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

Hybrid CuSn nanosphere-functionalized Cu/Sn co-doped hollow carbon nanofibers as anode materials for sodium-ion batteries

To strengthen the electrochemical performance of anode materials for sodium-ion batteries, Cu/Sn co-doped hollow carbon nanofibers functionalized by hybrid CuSn nanospheres (CuSn/C@MCNF) were prepared by a simple electrospinning method. The microstructural characteristics of CuSn/C@MCNF confirmed the same doped elements and strong interactions in hybrid CuSn nanospheres and the hollow carbon nanofiber substrate. CuSn/C@MCNF has superior specific capacity, excellent conductivity and high cycling stability. In particular, the doped hollow carbon nanofiber substrate can facilitate Na+ transport and alleviate volume expansion during the process of sodium storage. When applied as an anode material for sodium-ion batteries, CuSn/C@MCNF can deliver a reversible capacity of 340.1 mA h g-1 at a large current density of 1 A g-1 for 1000 cycles and a high-rate capacity of 202.5 mA h g-1 at 4.0 A g-1, all superior to the corresponding Sn-SnOx@MCNF- and MCNF-based electrodes. This work provides a basic idea for future anode materials in high-performance sodium-ion batteries.

Enhancing lithium storage performance of bimetallic oxides anode by synergistic effects

Spinel bimetallic transition metal oxide anode such as ZnMn₂O₄, has drawn increasing interest due to attractive bimetal interaction and high theoretical capacity. While it suffers from huge volume expansion and poor ionic/electronic conductivity. Nanosizing and carbon modification can alleviate these issues, while the optimal particle size within host is unclear yet. We here propose an in-situ confinement growth strategy to fabricate pomegranate-structured ZnMn₂O₄ nanocomposite with calculated optimal particle size in mesoporous carbon host. Theoretical calculations reveal favorable interatomic interactions between the metal atoms. By the synergistic effects of structural merits and bimetal interaction, the optimal ZnMn₂O₄ composite achieves greatly improved cycling stability (811 mAh g^-1 at 0.2 A g^-1 after 100 cycles), which can maintain its structural integrity upon cycling. X-ray absorption spectroscopy analysis further confirms delithiated Mn species (Mn₂O₃ but little MnO). Briefly, this strategy brings new opportunity to ZnMn₂O₄ anode, which could be adopted to other conversion/alloying-type electrodes.

Cross-linked amorphous potassium titanate Nanobelts/Titanium carbide MXene nanoarchitectonics for efficient sodium storage at low temperature

One of the major challenges to improving the performance of sodium-ion batteries at low temperatures is to develop effective anode materials with novel structures and fast reaction kinetics. Currently, converting electrode materials from the crystalline to amorphous state is an effective approach to fabricate the electrode material with high sodium storage performance. Herein, a three-dimensional (3D) cross-linked heterostructure with one-dimensional (1D) amorphous potassium titanate (KTiOx) nanobelts in-situ grown on two-dimensional (2D) titanium carbide (Ti2CTx) nanosheets (a-KTiOx/Ti2CTx) was fabricated through alkalization of the multilayered Ti2CTx MXene, which exhibits remarkable sodium storage performance at both room and low temperatures. The heterostructure prepared by the combination of 1D amorphous nanobelts and 2D conductive nanosheets enables efficient strain alleviation in the electrode, a high capacitive contribution to charge storage, rapid ionic diffusion kinetics, and robust electrode integrity, thus enhancing the sodium storage performance. In particular, reversible capacities of 221.9, 144.2 and 112.6 mAh/g can be achieved at 0.1 A/g after 100 cycles at 25, 0 and -25 °C, respectively. This study provides significant insights into the construction of MXene-based electrode materials for sodium storage at low temperatures.

Porous biscuit-like nanoplate FeNb11O29-x@C for lithium-ion storage and oxygen evolution

The development of efficient and stable electrode materials for lithium-ion batteries (LIBs) and the oxygen evolution reaction (OER) is critical for clean and sustainable energy storage and conversion. In this work, porous biscuit-like nanoplate FeNb₁₁O_29-x@C is reasonably prepared by morphology control and microstructure modification, and presents many advantages in LIBs and the OER. In particular, FeNb₁₁O_29-x@C displays a large specific surface area, abundant active sites and a significant edge effect, thus improving the Li⁺ reactivity and OER kinetics. Meanwhile, the oxygen vacancies and lattice defects in FeNb₁₁O_29-x@C enhance the Li⁺ transport rate and reduce the OER barrier. In addition, the carbon layer structure not only inhibits the irreversible reaction between the electrolyte and metal ions, but promotes the stability, cycling ability and conductivity of LIBs and the OER. Generally, FeNb₁₁O_29-x@C demonstrates good electrochemical performance in LIBs (providing 240.8 mA h g^-1 reversible capacity at a current density of 0.25C and just 0.98% capacity attenuation after 500 cycles at a current density of 10C). Again, it also shows high catalytic performance in the OER (a low overpotential (290 mV@10 mA cm^-2), a small Tafel slope (44.4 mV dec^-1) and desirable catalytic stability).

Rational Design Hierarchical SnS2 Uniformly Adhered to Three-Sided Carbon Active Sites to Enhance Sodium Storage

Reducing material accumulation and designing reasonable sizes are critical strategies for increasing the rate and cycling stability of electrode materials. Herein, we presented a double-walled hollow carbon spheres (DWHCSs) loading strategy for achieving ultrafine SnS₂ nanosheet adhesion by utilizing three-sided active sites of the interior/exterior carbon walls. The structure effectively shortened the electron/ion transport path, increased the effective contact between electrolyte and electrode material, and promoted ion diffusion kinetics. Furthermore, the hollow structure can adapt to the volume change of the electrode during the cycle, preventing active substances from draining. Based on the above advantages, SnS₂@DWHCSs as an anode material for sodium ion batteries (SIBs) exhibited a distinguished reversible capacity of 665.7 mA h g^-1 at 2 A g^-1 after 1000 cycles, and a superior rate ability of 377.6 mA h g^-1 at an ultrahigh rate of 10 A g^-1. The outstanding electrochemical performance revealed that the structure exhibited a broad application prospect in the field of energy storage and provided a reference for the rational design of other 2D materials.

Wool-Based Carbon Fiber/MoS2 Composite Prepared by Low-Temperature Catalytic Hydrothermal Method and Its Application in the Field of Gas Sensors

Under the background of the Paris Agreement on reducing greenhouse gases, waste wools were converted into wool carbon fiber (WCF) and WCF-MoS2 composites by low-temperature catalytic hydrothermal carbonization. Their structures and gas-sensing performances were studied for the first time. Due to the existence of heterojunctions, the responses of the WCF-MoS2 composite to the five analytes were 3-400 times those of MoS2 and 2-11 times those of WCF. Interestingly, because of the N, P, and S elements contained in wools, the WCF prepared by the hydrothermal method was realized the doping of N, P, and S, which caused the sensing curves of WCF to have different shapes for different analytes. This characteristic was also well demonstrated by the WCF-MoS2 composite, which inspired us to realize the discriminative detection only by a single WCF-MoS2 sensor and image recognition technology. What's more, the WCF-MoS2 composite also showed a high sensitivity, a high selectivity, and a rapid response to NH3. The response time and the recovery time to 3 ppm NH3 were about 16 and 5 s, respectively. The detection of limit of WCF-MoS2 for NH3 was 19.1 ppb. This work provides a new idea for the development of sensors and the resource utilization of wool waste.

A Review on Recent Advances for Boosting Initial Coulombic Efficiency of Silicon Anodic Lithium Ion batteries

Rechargeable silicon anode lithium ion batteries (SLIBs) have attracted tremendous attention because of their merits, including a high theoretical capacity, low working potential, and abundant natural sources. The past decade has witnessed significant developments in terms of extending the lifespan and maintaining high capacities of SLIBs. However, the detrimental issue of low initial Coulombic efficiency (ICE) toward SLIBs is causing more and more attention in recent years because ICE value is a core index in full battery design that profoundly determines the utilization of active materials and the weight of an assembled battery. Herein, a comprehensive review is presented of recent advances in solutions for improving ICE of SLIBs. From design perspectives, the strategies for boosting ICE of silicon anodes are systematically categorized into several aspects covering structure regulation, prelithiation, interfacial design, binder design, and electrolyte additives. The merits and challenges of various approaches are highlighted and discussed in detail, which provides valuable insights into the rational design and development of state-of-the-art techniques to deal with the deteriorative issue of low ICE of SLIBs. Furthermore, conclusions and future promising research prospects for lifting ICE of SLIBs are proposed at the end of the review.

Boosting the lithium storage performance by synergistically coupling ultrafine heazlewoodite nanoparticle with N, S co-doped carbon

Transition metal sulfides, as an important class of inorganics, have been shown to be potential high-performance electrode candidates for lithium-ion batteries (LIBs) in account of their high activity towards lithium storage, rich types and diverse structures. Despite these advantages, structure degradation related with volume variations upon electrochemical cycling restricts their further development. In this present study, a unique hybrid structure with ultrafine heazlewoodite nanoparticles (less than 10 nm) in-situ confined in nitrogen and sulfur dual-doped carbon (Ni₃S₂@NSC) was constructed though a facile pyrolysis process, using a novel Ni-based metal chelates as the precursor. Specifically, enhanced structure stability, shortened Li⁺ migration distance and improved reaction dynamics can be obtained simultaneously in the designed structure, thereby allowing to realize high lithium storage performance. Consequently, a remarkable reversible capacity of 955.9 mAh g^-1 (0.1 A g^-1 after 100 cycles) and a superior long-term cycling stability up to 1200 cycles (863.7 mAh g^-1 at 1.0 A g^-1) are obtained. Importantly, the fundamental understanding on the improved lithium storage of Ni₃S₂@NSC based on the synergistic coupling reveals that the combination between Ni₃S₂ and NSC at the hetero-interface through the doped sulfur atoms contributes to the integrity of electrode and improved kinetics.

Atomic Welded Dual-Wall Hollow Nanospheres for Three-in-One Hybrid Storage Mechanism of Alkali Metal Ion Batteries

The rational design of hierarchical hollow nanomaterials is of critical significance in energy storage materials. Herein, dual-wall hollow nanospheres (DWHNS) Sn/MoS₂@C are constructed by in situ confined growth and interface engineering. The inner hollow spheres of Sn/MoS₂ are formed by atomic soldering MoS₂ nanosheets with liquid Sn at high temperature. The formation mechanism of the hierarchical structure is explored by the morphology evolutions at different temperatures. The DWHNS Sn/MoS₂@C manifest abundant inner space and high specific surface area, which provides more support sites for Li⁺/Na⁺/K⁺ storage and alleviates the volume effect of tin-based electrode materials to a certain extent. The composite material manifests an outstanding specific capacity and satisfactory reversibility of lithium ion batteries (∼931 mAh g^-1 at 1 A g^-1 after 500 cycles), sodium ion batteries (∼432 mAh g^-1 at 1 A g^-1 after 400 cycles), and potassium ion batteries (∼226 mAh g^-1 at 1 A g^-1 after 300 cycles). Additionally, the morphology evolution and mechanism analysis of DWHNS Sn/MoS₂@C in alkali metal ion batteries are verified by ex situ measurement, which confirms the three-in-one hybrid storage mechanism, i.e., intercalation reaction of carbon shells, conversion reaction of MoS₂, and alloying reaction of tin.

Strategic Structure Tuning of Yolk-Shell Microcages for Efficient Nitrogen Fixation

The electrocatalytic nitrogen reduction reaction (ENRR) under ambient conditions is considered as a promising process to produce ammonia. Towards highly efficient catalysts, here an optimized one-step pyrolysis strategy was tailored to design yolk-shell microcages (YS Co@C/BLCNTs), consisting of Co nanocrystals encapsulated in N-doped carbon framework and bridged by bamboo-like carbon nanotubes (BLCNTs). The cavity created between yolk and shell not only served as a "micro-bag" to store the reactant N₂ and enhance its dissolution, but also induced a "cage effect" to confine the diffusion of reaction intermediate, hence making the reaction proceed in the direction of producing NH₃ . This catalyst displayed excellent catalytic activities for ENRR: a high NH₃ yield of 12.87 μg mg_cat ^-1  h^-1 at a high faradaic efficiency of 20.7 % at -0.45 V (vs. reversible hydrogen electrode, RHE). After 5 cycles of consecutive ENRR process, the NH₃ yield rate was 11.29 μg mg_cat ^-1  h^-1 , indicating the excellent electrocatalytic stability. These results provide a structural engineering for ENRR catalyst with doped N, cooperating with non-precious metal to activate the inert triple bond of N₂ and achieve NH₃ fixation.

Facile fabrication and low-temperature bonding of Cu@Sn–Bi core–shell particles for conductive pastes

Cu@Sn–Bi core–shell particles were synthesized and used as conductive fillers of ink applied to flexible printed circuits. This work provides new insights into the low-temperature bonding and anti-oxidation protection of Cu-based conductive pastes.

Convenient fabrication of a core–shell Sn@TiO2 anode for lithium storage from tinplate electroplating sludge

A convenient route was developed for the fabrication of a high-performance core–shell Sn@TiO₂ anode for LIBs from tinplate electroplating sludge.