Adsorption of Cd2+ by Lactobacillus plantarum Immobilized on Distiller's Grains Biochar: Mechanism and Action

Immobilized microbial technology has recently emerged as a prominent research focus for the remediation of heavy metal pollution because of its superior treatment efficiency, ease of operation, environmental friendliness, and cost-effectiveness. This study investigated the adsorption characteristics and mechanisms of Cd2+ solutions by Lactobacillus plantarum adsorbed immobilized on distiller's grains biochar (XIM) and Lactobacillus plantarum-encapsulated immobilized on distiller's grains biochar (BIM). The findings reveal that the maximum adsorption capacity and efficiency were achieved at a pH solution of 6.0. Specifically, at an adsorption equilibrium concentration of cadmium at 60 mg/L, XIM and BIM had adsorption capacities of 8.40 ± 0.30 mg/g and 12.23 ± 0.05 mg/g, respectively. BIM demonstrated noticeably greater adsorption capacities than XIM at various cadmium solution concentrations. A combination of isothermal adsorption modeling, kinetic modeling, scanning electron microscopy-energy dispersive X-ray spectroscopy, X-ray diffractometer (XRD), and Fourier-transform infrared spectroscopy (FTIR) analyses showed that cadmium adsorption by XIM primarily involved physical adsorption and pore retention. In contrast, the adsorption mechanism of BIM was mainly attributed to the formation of Cd(CN)2 crystals.

The effect of carbon chain length of cross-linking agent on the functionality of carrier- free immobilized Thermomyces lanuginosa lipase particles

The cross-linked enzyme (CLEs) of Thermomyces lanuginosa lipase (TLL) was prepared in an isocyanide-based multi-component reactions (ICMRs) platform by applying three di-acidic cross-linkers to unveil more factors contributing to the functional properties of CLEs. The linkers were 1,11-undecanedicarboxylic acid, azelaic acid, and adipic acid with 11, 7, and 4 carbon lengths, respectively, providing a proper tool to investigate the effect of linker length on the activity, stability, and selectivity of the resulting CLEs. The immobilization yields of 60-90 % and the specific activities of 168, 88.4 and 49 U/mg were obtained for the CLEs of 1,11-undecanedicarboxylic acid, azelaic acid, adipic acid, respectively. The lower activity of azelaic and adipic acid-mediated CLEs compared to the soluble TLL (110 U/mg) was explained by in silico calculations. The results revealed that as opposed to 1,11-undecanedicarboxylic acid, both linkers tended to penetrate the enzyme active site, thus resulting in a major inhibitory effect on the enzyme functionality. The thermal and co-solvent stability of the immobilized derivatives improved compared to those of free TLL. The selectivity of CLEs was also examined by catalytic release of main omega-3 fatty acids from fish oil, presenting the highest selectivity of 22 for the CLEs of azelaic acid.

Redox-reversible siderophore-based catalyst anchoring within cross-linked artificial metalloenzyme aggregates enables enantioselectivity switching

The immobilisation of artificial metalloenzymes (ArMs) holds promise for the implementation of new biocatalytic reactions. We present the synthesis of cross-linked artificial metalloenzyme aggregates (CLArMAs) with excellent recyclability, as an alternative to carrier-based immobilisation strategies. Furthermore, iron-siderophore supramolecular anchoring facilitates redox-triggered cofactor release, enabling CLArMAs to be recharged with alternative cofactors for diverse selectivity.

Combined cross-linking of Rhizomucor miehei lipase and Candida antarctica lipase B for the effective enrichment of omega-3 fatty acids in fish oil

The incorporation of a non-specific lipase and a sn-1,3 specific one in a single immobilized system can be a promising approach for the exploitation of both lipases. A one-step immobilization platform mediated by an isocyanide-based multi-component reaction was applied to create co-cross-linked enzymes (co-CLEs) of lipases from Rhizomucor miehei (sn-1,3 specific) and Candida antarctica (non-specific). Glutaraldehyde was found to be effective cross-linker by producing specific activity of 16.9 U/mg and immobilization yield of 99 %. High activity recovery of up to 404 % was obtained for immobilized derivatives. Leaking experiment showed covalent nature of the cross-linking processes. BSA had considerable effect on the immobilization process, providing 87-100 % immobilization yields and up to 10 times improvement in the specific activity of the immobilized derivatives. Scanning electron microscopy images showed flower-like and rod-like structures for the CLEs prepared by glutaraldehyde and undecanedicarboxylic acid, respectively. The prepared co-CLEs were examined in non-selective enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from fish oil, showing capability of releasing up to 100 % of both omega-3 fatty acids within 8 h of the reaction. The reusability of co-CLEs in five successive cycles presented retaining 63-72 % of their initial activities after the fifth reuse cycle in the hydrolysis reaction.

Recent advances in biopolymer-based hydrogels and their potential biomedical applications

Hydrogels are three-dimensional networks of polymer chains containing large amounts of water in their structure. Hydrogels have received significant attention in biomedical applications owing to their attractive physicochemical properties, including flexibility, softness, biodegradability, and biocompatibility. Different natural and synthetic polymers have been intensely explored in developing hydrogels for the desired applications. Biopolymers-based hydrogels have advantages over synthetic polymers regarding improved cellular activity and weak immune response. These properties can be further improved by grafting with other polymers or adding nanomaterials, and they structurally mimic the living tissue environments, which opens their broad applicability. The hydrogels can be physically or chemically cross-linked depending on the structure. The use of different biopolymers-based hydrogels in biomedical applications has been reviewed and discussed earlier. However, no report is still available to comprehensively introduce the synthesis, advantages, disadvantages, and biomedical applications of biopolymers-based hydrogels from the material point of view. Herein, we systematically overview different synthesis methods of hydrogels and provide a holistic approach to biopolymers-based hydrogels for biomedical applications, especially in bone regeneration, wound healing, drug delivery, bioimaging, and therapy. The current challenges and prospects of biopolymers-based hydrogels are highlighted rationally, giving an insight into the progress of these hydrogels and their practical applications.

Performance of cross-linked enzyme crystals of engineered halohydrin dehalogenase HheG in different chemical reactor systems

Halohydrin dehalogenase HheG is an industrially interesting biocatalyst for the preparation of different β-substituted alcohols starting from bulky internal epoxides. We previously demonstrated that the immobilization of different HheG variants in the form of cross-linked enzyme crystals (CLECs) yielded stable and reusable enzyme immobilizes with increased resistance regarding temperature, pH, and the presence of organic solvents. Now, to further establish their preparative applicability, HheG D114C CLECs cross-linked with bis-maleimidoethane have been successfully produced on a larger scale using a stirred crystallization approach, and their application in different chemical reactor types (stirred tank reactor, fluidized bed reactor, and packed bed reactor) was systematically studied and compared for the ring opening of cyclohexene oxide with azide. This revealed the highest obtained space-time yield of 23.9 kgproduct  gCLEC -1  h-1  Lreactor volume -1 along with the highest achieved product enantiomeric excess [64%] for application in a packed-bed reactor. Additionally, lyophilization of those CLECs yielded a storage-stable HheG preparation that still retained 67% of initial activity (after lyophilization) after 6 months of storage at room temperature.

Isocyanide-based multi-component reactions for carrier-free and carrier-bound covalent immobilization of enzymes

Strategies for the covalent immobilization of enzymes depend on the type of functional group selected to perform the coupling reaction, and on the relative importance of selectivity, loading capacity, immobilization time and activity/stability of the resulting immobilized preparation. However, no single strategy is applicable for all covalent immobilization methods or can meet all these criteria, exemplifying the challenge of introducing a versatile process broadly compatible with the residues on the surface of proteins and the functional groups of common linkers. Here, we describe the use of isocyanide-based multi-component reactions for the carrier-bound and carrier-free covalent immobilization of enzymes. Isocyanide-based multi-component reactions can accept a wide variety of functional groups such as epoxy, acid, amine and aldehyde, as well as many commercially available bi-functional linkers, and are therefore suitable for either covalent coupling of enzymes on a solid support or intermolecular cross-linking of enzymes. In this strategy, an isocyanide is directly added to the reaction medium, the enzyme supplies either the exposed amine or carboxylic acid groups, and the support (in carrier-bound immobilization) or the bi-functional cross-linking agent (in carrier-free immobilization) provides another reactive functional group. The protocol offers operational simplicity, high efficiency and a notable reduction in time over alternative strategies, and can be performed by users with expertise in chemistry or biology. The immobilization reactions typically require 1-24 h.

Ugi Four-Component Reactions Using Alternative Reactants

The Ugi four-component reaction (Ugi-4CR) undoubtedly is the most prominent multicomponent reaction (MCRs) that has sparked organic chemists' interest in the field. It has been widely used in the synthesis of diverse heterocycle molecules such as potential drugs, natural product analogs, pseudo peptides, macrocycles, and functional materials. The Ugi-4CRs involve the use of an amine, an aldehyde or ketone, an isocyanide, and a carboxylic acid to produce an α-acetamido carboxamide derivative, which has significantly advanced the field of isocyanide-based MCRs. The so-called intermediate nitrilium ion could be trapped by a nucleophile such as azide, N-hydroxyphthalimide, thiol, saccharin, phenol, water, and hydrogen sulfide instead of the original carboxylic acid to allow for a wide variety of Ugi-type reactions to occur.β In addition to isocyanide, there are alternative reagents for the other three components: amine, isocyanide, and aldehyde or ketone. All these alternative components render the Ugi reaction an aptly diversity-oriented synthesis of a myriad of biologically active molecules and complex scaffolds. Consequently, this review will delve deeper into alternative components used in the Ugi MCRs, particularly over the past ten years.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

Biocatalytic decarboxylative Michael addition for synthesis of 1,4-benzoxazinone derivatives

The Candida antarctica lipase B (Novozym 435) is found to catalyze a novel decarboxylative Michael addition in vinylogous carbamate systems for the synthesis of 1,4-benzoxazinone derivatives. The reaction goes through Michael addition, ester hydrolysis and decarboxylation. A possible mechanism is suggested, with simultaneous lipase-catalyzed Michael addition and ester hydrolysis. The present methodology offers formation of complex products through multi-step reactions in a one pot process under mild and facile reaction conditions with moderate to high yields (51–90%) and no side product formation. The reaction seems to be is a great example of enzymatic promiscuity.

Sortase-mediated immobilization of Candida antarctica lipase B (CalB) on graphene oxide; comparison with chemical approach

•

Sortase A was used for the oriented immobilization of CalB on graphene oxide nanosheets

•

Random attachment of CalB on GO nanosheets were performed by chemical immobilization

•

The immobilized CalB were used for the enrichment of omega-3 fatty acids in fish oil

•

The derivative obtained from oriented immobilization showed improved selectivity

In this study, Candida antarctica lipase B (CalB) was covalently immobilized on the surface of graphene oxide (GO) nanoparticles by sortase-mediated immobilization as well as a chemical attachment approach. Sortase is a transpeptidase that provides one-step purification and targeted immobilization of CalB from one specific site, presenting oriented attachment of the enzyme to a solid support. Chemical immobilization, on the other hand, is considered as a random immobilization, in which the protein can bind to the support from different regions of the protein surface. In this approach, amine-functionalized GO was further modified with glutaraldehyde to facilitate the covalent binding of CalB via its amine residues. The applied methods produced 60% and 100% immobilization yields and presented 0.106 U/mg and 0.085 U/mg of specific activities for the oriented and random immobilization, respectively. The stabilized enzyme with the sortase-mediated approach retained approximately 80% of its initial activity at 50°C.

A multi-component reaction for covalent immobilization of lipases on amine-functionalized magnetic nanoparticles: production of biodiesel from waste cooking oil

A new approach was used for the immobilization of Thermomyces lanuginosus lipase (TLL), Candida antarctica lipase B (CALB), and Rhizomucor miehei lipase (RML) on amine-functionalized magnetic nanoparticles (Fe3O4@SiO2-NH2) via a multi-component reaction route (using cyclohexyl isocyanide). The used method offered a single-step and very fast process for covalent attachment of the lipases under extremely mild reaction conditions (25 °C, water, and pH 7.0). Rapid and simple immobilization of 20 mg of RML, TLL, and CALB on 1 g of the support produced 100%, 98.5%, and 99.2% immobilization yields, respectively, after 2 h of incubation. The immobilized derivatives were then used for biodiesel production from waste cooking oil. Response surface methodology (RSM) in combination with central composite rotatable design (CCRD) was employed to evaluate and optimize the biodiesel production. The effect of some parameters such as catalyst amount, reaction temperature, methanol concentration, water content for TLL or water-adsorbent for RML and CALB, and ratio of t-butanol (wt%) were investigated on the fatty acid methyl esters (FAME) yield.

Cellulose-deconstruction potential of nano-biocatalytic systems: A strategic drive from designing to sustainable applications of immobilized cellulases

Nanostructured materials along with an added value of polymers-based support carriers have gained high interest and considered ideal for enzyme immobilization. The recently emerged nanoscience interface in the form of nanostructured materials combined with immobilized-enzyme-based bio-catalysis has now become research and development frontiers in advance and applied bio-catalysis engineering. With the involvement of nanoscience, various polymers have been thoroughly developed and exploited to nanostructured engineer constructs as ideal support carriers/matrices. Such nanotechnologically engineered support carriers/matrix possesses unique structural, physicochemical, and functional attributes which equilibrate principal factors and strengthen the biocatalysts efficacy for multipurpose applications. In addition, nano-supported catalysts are potential alternatives that can outstrip several limitations of conventional biocatalysts, such as reduced catalytic efficacy and turnover, low mass transfer efficiency, instability during the reaction, and most importantly, partial, or complete inhibition/deactivation. In this context, engineering robust and highly efficient biocatalysts is an industrially relevant prerequisite. This review comprehensively covered various biopolymers and nanostructured materials, including silica, hybrid nanoflower, nanotubes or nanofibers, nanomembranes, graphene oxide nanoparticles, metal-oxide frameworks, and magnetic nanoparticles as robust matrices for cellulase immobilization. The work is further enriched by spotlighting applied and industrially relevant considerations of nano-immobilized cellulases. For instance, owing to the cellulose-deconstruction features of nano-immobilized cellulases, the applications like lignocellulosic biomass conversion into industrially useful products or biofuels, improved paper sheet density and pulp beat in paper and pulp industry, fruit juice clarification in food industry are evident examples of cellulases, thereof are discussed in this work.