Synthesis of TiO2-x/W18O49 hollow double-shell and core-shell microspheres for CO2 photoreduction under visible light

Enhancing charge transfer in a W18O49/g-C3N4 heterostructure via band structure engineering for effective SERS detection and flexible substrate applications

Chemical mechanism (CM)-related surface-enhanced Raman spectroscopy (SERS) has received tremendous interest due to its exceptional stability and excellent uniformity. Nevertheless, there remains a demand for ingenious methodologies for promoting effective charge transfer (CT) to improve SERS sensitivity further. Herein, a band structure engineered W18O49/g-C3N4 heterostructure (WCN) was first employed as a CM-based SERS substrate with remarkable enhancement and sensitivity. To investigate the Raman enhancement properties of the substrate, malachite green (MG) was employed as the Raman probe with the excitation of a 633 nm laser. The WCN substrate exhibits a Raman enhancement factor (EF) of 2.6 × 107, achieving a limit of detection (LOD) of 1.9 × 10-10 M for MG. The outstanding Raman amplification behavior can be attributed to the heterojunction-induced efficient CT process, energy band matching resonance due to minor doping with g-C3N4 serving as a band gap modifier, and improved photo-induced charge transfer (PICT) efficiency via the oxygen vacancies in the W18O49 units. Additionally, a flexible SERS substrate based on WCN was constructed using a vacuum filtration method and utilized to detect prohibited pharmaceutical residues on fish skin. The integration of this WCN and a nylon membrane not only preserves the Raman activity of the WCN for sensitive detection but also endows the Raman substrate with high flexibility and good mechanical durability, making it a potential candidate for in situ detection in particular environments.

W18O49/MnWO4 heterojunction for highly efficient photocatalytic reduction of CO2 under full spectrum light

Solar-energy-driven CO₂ reduction for chemical reagents production, such as CH₃OH, CH₄ and CO, has tremendous potential for carbon neutrality in the energy industries. However, the low reduction efficiency limits its applicability. Herein, W₁₈O₄₉/MnWO₄ (WMn) heterojunctions were prepared via one-step in-situ solvothermal process. Through this method, W₁₈O₄₉ tightly combined with the surface of MnWO₄ nanofibers to form nanoflower heterojunction. It was found that under full spectrum light irradiation for 4 h, the yields of photoreduction of CO₂ to CO, CH₄ and CH₃OH by 3-1 WMn heterojunction were 61.74, 71.30 and 18.98 μmol/g, respectively, which were 2.4, 1.8 and 1.1 times that of pristine W₁₈O₄₉, and ca.20 times that of pristine MnWO₄ towards CO production. Furthermore, even in the air atmosphere, the WMn heterojunction still performed excellent photocatalytic performance. Systematic investigations demonstrated that the catalytic performance of WMn heterojunction was improved by superior light utilization and more efficient photo-generated carrier separation and migration as compared with W₁₈O₄₉ and MnWO₄. Meanwhile, the intermediate products of the photocatalytic CO₂ reduction process were also studied in detail by in-situ FTIR. Therefore, this study provides a new way for designing high efficiency of heterojunction for CO₂ reduction.

Recent Advances and Perspectives of Core-Shell Nanostructured Materials for Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into solar fuels is a promising technology to alleviate CO₂ emissions and energy crises. The development of core-shell structured photocatalysts brings many benefits to the photocatalytic CO₂ reduction process, such as high conversion efficiency, sufficient product selectivity, and endurable catalyst stability. Core-shell nanostructured materials with excellent physicochemical features take an irreplaceable position in the field of photocatalytic CO₂ reduction. In this review, the recent development of core-shell materials applied for photocatalytic reduction of CO_{2 is introduced} . First, the basic principle of photocatalytic CO₂ reduction is introduced. In detail, the classification and synthesis techniques of core-shell catalysts are discussed. Furthermore, it is also emphasized that the excellent properties of the core-shell structure can greatly improve the activity, selectivity, and stability in the process of photocatalytic CO₂ reduction. Hopefully, this paper can provide a favorable reference for the preparation of efficient photocatalysts for CO₂ reduction.

Photocatalytic reduction of low-concentration CO2 by metal-organic frameworks

Direct conversion of diluted CO₂ to value-added chemical stocks and fuels with solar energy is an energy-saving approach to relieve global warming and realize a carbon-neutral cycle. The exploration of catalysts with both efficient CO₂ adsorption and reduction ability is significant to achieving this goal. Metal-organic frameworks (MOFs) are emerging in the field of low-concentration CO₂ reduction due to their highly tunable structure, high porosity, abundant active sites and excellent CO₂ adsorption capacity. This highlight outlines the advantages of MOFs for low-pressure CO₂ adsorption and the strategies to improve the photocatalytic performance of MOF materials at low CO₂ concentrations, including the functionalization of organic ligands, regulation of metal nodes and preparation of MOF composites or derivatives. This paper aims to provide possible avenues for the rational design and development of catalysts with the ability to reduce low-concentration CO₂ efficiently for practical applications.

A review on TiO2-x-based materials for photocatalytic CO2 reduction

Photocatalytic CO₂ reduction technology has a broad potential for dealing with the issues of energy shortage and global warming. As a widely studied material used in the photocatalytic process, titanium dioxide (TiO₂) has been continuously modified and tailored for more desirable application. Recently, the defective/reduced titanium dioxide (TiO_2-x) catalyst has attracted broad attention due to its excellent photocatalytic performance for CO₂ reduction. In this perspective review, we comprehensively present the recent progress in TiO_2-x-based materials for photocatalytic CO₂ reduction. In detail, the review starts with the fundamentals of CO₂ photocatalytic reduction. Then, the synthesis of a defective TiO₂ structure is introduced for the regulation of its photocatalytic performance, especially its optical properties and dissociative adsorption properties. In addition, the current application of TiO_2-x-based photocatalysts for CO₂ reduction is also highlighted, such as metal-TiO_2-x, oxide-TiO_2-x and TiO_2-x-carbon-based photocatalysts. Finally, the existing challenges and possible scope of photocatalytic CO₂ reduction over TiO_2-x-based materials are discussed. We hope that this review can provide an effective reference for the development of more efficient and reasonable photocatalysts based on TiO_2-x.

Core-shell TiO2-x-CuyO microspheres for photogeneration of cyclic carbonates under simulated sunlight

Propylene carbonates are important organic solvents and feedstocks for different applications, including synthesis of polymers and Li-batteries. The generation of propylene carbonate utilising anthropogenic CO₂ and renewable solar energy offers an alternative sustainable process with a closed loop carbon cycle. The development of microstructured photocatalysts with desired properties, including high degree of product selectivity, wide range of optical properties, and maximised conversion yield, plays an important role for effective production of propylene carbonate from CO₂. A hierachical hollow core with a double shell of TiO_2-x-Cu₂O-CuO was fabricated using the versatile solvothermal-microwave synthesis method. The fabricated sample revealed effective cascading of photogenerated electrons and holes that promoted the conversion of propylene carbonate (i.e., 1.6 wt%) under 1 Sun irradiation.

Pd Nanosheet-Decorated 2D/2D g-C3N4/WO3·H2O S-Scheme Photocatalyst for High Selective Photoreduction of CO2 to CO

The development of the global economy in recent years, environmental problems, greenhouse effect, and so forth have been of concern for countries all over the world. The key for solving the greenhouse effect is the reduction of CO₂. With the development of photocatalytic reduction of CO₂, hybrid photocatalytic nanostructures composed of noble metals and plasmonic semiconductors are being widely studied. In this work, S-scheme photocatalysts with a g-C₃N₄/WO₃·H₂O/Pd heterostructure was constructed by introducing ultrathin Pd nanosheets into the optimized 2D/2D g-C₃N₄/WO₃·H₂O binary system. The S-scheme charge transfer generated by the matched band gap of g-C₃N₄ and WO₃·H₂O can effectually improve the electron transfer rate and the redox ability of photogenerated carriers. The introduction of Pd nanosheets can inject a large number of hot electrons into the semiconductor on the basis of the S-scheme heterojunction to participate in the reaction. The S-scheme electron transfer method is used to improve the utilization rate of thermionic electrons and achieve the effect of widening the near-infrared-light absorption area of the composite material. Moreover, the reaction was carried out in water without the addition of any sacrificial agent, which can better reflect the green environmental protection of the experiment. This investigation will promote the broad-spectrum application of new and environment-friendly thermoelectron-assisted S-scheme photocatalysts, and on this basis, the possible reaction mechanism is discussed.

In situ Irradiated XPS Investigation on S-Scheme TiO2 @ZnIn2 S4 Photocatalyst for Efficient Photocatalytic CO2 Reduction

Reasonable design of efficient hierarchical photocatalysts has gained significant attention. Herein, a step-scheme (S-scheme) core-shell TiO₂ @ZnIn₂ S₄ heterojunction is designed for photocatalytic CO₂ reduction. The optimized sample exhibits much higher CO₂ photoreduction conversion rates (the sum yield of CO, CH₃ OH, and CH₄ ) than the blank control, i.e., ZnIn₂ S₄ and TiO₂ . The improved photocatalytic performance can be attributed to the inhibited recombination of photogenerated charge carriers induced by S-scheme heterojunction. The improvement is also attributed to the large specific surface areas and abundant active sites. Meanwhile, S-scheme photogenerated charge transfer mechanism is testified by in situ irradiated X-ray photoelectron spectroscopy, work function calculation, and electron paramagnetic resonance measurements. This work provides an effective strategy for designing highly efficient heterojunction photocatalysts for conversion of solar fuels.

A power-triggered preparation strategy of nano-structured inorganics: sonosynthesis

Ultrasound irradiation covers many chemical reactions crucially aiming to design and synthesize various structured materials as an enduring trend in frontier research studies. Here, we focus on the latest progress of ultrasound-assisted synthesis and present the basic principles or mechanisms of sonosynthesis (or sonochemical synthesis) from ultrasound irradiation in a brand new way, including primary sonosynthesis, secondary sonosynthesis, and synergetic sonosynthesis. This current review describes in detail the various sonochemical synthesis strategies for nano-structured inorganic materials and the unique aspects of products including the size, morphology, structure, and properties. In addition, the review points out the probable challenges and technological potential for future advancement. We hope that such a review can provide a comprehensive understanding of sonosynthesis and emphasize the great significance of structured materials synthesis as a power-induced strategy broadening the updated applications of ultrasound.