Cobalt porphyrin-based hypercrosslinked ionic polymers as biomimetic nanoreactors for CO2 conversion to cyclic carbonates

A simple and low-cost approach to construct one type of cobalt porphyrin-based hypercrosslinked ionic polymer with high specific surface areas, densely located ionic groups and highly dispersed cobalt sites has been demonstrated, which act as bifunctional catalysts for the solvent-additive-free conversion of CO2 into cyclic carbonates with outstanding biomimetic catalytic performance and good recyclability.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

Porphyrin-based hypercrosslinked polymers as sorbents for efficient extraction of nitroimidazoles from water, honey and chicken breast

In this work, a series of 5,10,15,20-tetraphenylporphyrin (TPP)-based hyper crosslinked polymers were prepared by Friedel-Crafts reaction. Among them, the HCP-TPP-BCMBP, which was prepared by using TPP as the monomer and with 4,4'-Bis(chloromethyl)-1,1'-biphenyl (BCMBP) as the cross-linking agent, had the best adsorption capability for the enrichment of the nitroimidazoles of dimetridazole, ronidazole, secnidazole, metronidazole, and ornidazole. Then, a solid-phase extraction (SPE) method with the HCP-TPP-BCMBP as adsorbent coupled with HPLC-UV detection for the determination of nitroimidazole residues in honey, environmental water, and chicken breast samples was established. The influence of the main factors that affect the SPE, i.e., sample solution volume, sample loading rate, sample pH, and eluent and its volume, were studied. Under the optimal conditions, the limits of detection (S/N = 3) for the nitroimidazoles were measured to be in the range of 0.02-0.04 ng mL^-1, 0.4-1.0 ng g^-1 and 0.5-0.7 ng g^-1 for environmental water, honey, and chicken breast samples, with the determination coefficients being in the range of 0.9933-0.9998. The analytes recoveries by the method in fortified samples fell in the range from 91.1% to 102.7% for environmental water, from 83.2% to 105.0% for honey, and from 85.9% to 103.0% for chicken breast samples, and the relative standard deviations for the determination were less than 10%. It shows that the HCP-TPP-BCMBP has a strong adsorption capability for some polar compounds.

Switchable enzyme mimics based on self-assembled peptides for polyethylene terephthalate degradation

Polyethylene terephthalate (PET), the most abundant polyester plastic, has become a global concern due to its refractoriness and accumulation in the environment. In this study, inspired by the structure and catalytic mechanism of the native enzyme, peptides, based on supramolecular self-assembly, were developed to construct enzyme mimics for PET degradation, which were achieved by combining the enzymatic active sites of serine, histidine and aspartate with the self-assembling polypeptide MAX. The two designed peptides with differences in hydrophobic residues at two positions exhibited a conformational transition from random coil to β-sheet by changing the pH and temperature, and the catalytic activity followed the self-assembly "switch" with the fibrils formed β-sheet, which could catalyze PET efficiently. Although the two peptides possessed same catalytic site, they showed different catalytic activities. Analysis of the structure - activity relationship of the enzyme mimics suggested that the high catalytic activity of the enzyme mimics for PET could be attributed to the formation of stable fibers of peptides and ordered arrangement of molecular conformation; in addition, hydrogen bonding and hydrophobic interactions, as the major forces, promoted effects of enzyme mimics on PET degradation. Enzyme mimics with PET-hydrolytic activity are a promising material for degrading PET and reducing environmental pollution.

Aluminum Porphyrin-Based Ionic Porous Aromatic Frameworks Having High Surface Areas and Highly Dispersed Dual-Function Sites for Boosting the Catalytic Conversion of CO2 into Cyclic Carbonates

Multifunctionalization of porous organic polymers toward synergistic CO₂ catalysis has drawn much attention in recent decades, but it still faces many challenges. Herein, we develop a facile, simple, and efficient strategy to obtain a series of aluminum porphyrin-based ionic porous aromatic frameworks (iPAFs), which are considered excellent bifunctional catalysts for converting CO₂ into cyclic carbonates without any cocatalyst under mild and solvent-free conditions. By increasing the amounts of tetraphenylmethane fragments in the porphyrin backbones, the cooperative effect between Lewis acidic metal centers and nucleophilic ionic sites has been enhanced and then the significant improvement of catalytic activity can be achieved owing to the high surface areas (up to 719 m²·g^-1), abundant hierarchical micro-mesopores, and prominent CO₂ adsorption capacities (up to 1.8 mmol·g^-1 at 273 K) as well as highly dispersed dual-function sites. More fascinatingly, high-active AlPor-iPAF-3 enables CO₂ cycloaddition to perform with diluted CO₂ (15% CO₂ in 85% N₂, v/v) or under ambient conditions. Therefore, this postsynthetic modification procedure in combination with the framework dilution strategy provides a new approach to fabricating high-surface-area metalloporphyrin-based porous ionic polymers (PIPs) with hierarchical structures, which is conducive to improving the accessibility of multiple active sites around substrates.

High-Surface-Area Metalloporphyrin-Based Porous Ionic Polymers by the Direct Condensation Strategy for Enhanced CO2 Capture and Catalytic Conversion into Cyclic Carbonates

Metalloporphyrin-based porous organic polymers (POPs) that behave as advanced biomimetic nanoreactors have drawn continuous attention for heterogeneous CO₂ catalysis in the past decades. Inspired by the double activation model of epoxides, the design and synthesis of metalloporphyrin-based porous ionic polymers (PIPs) are considered as one of the most promising approaches for converting CO₂ to cyclic carbonates under cocatalyst- and solvent-free conditions. To overcome the obstacle of poor reaction activity of ionic monomers or highly irregular stacking architecture, in this paper, we have proposed and demonstrated a modular bottom-up approach for constructing a series of high-surface-area metalloporphyrin-based PIPs in high yields by the direct condensation strategy, thus boosting the close contact of multiple active sites and achieving the enhanced CO₂ capture and catalytic conversion into cyclic carbonates with high turnover frequencies under mild conditions. These recyclable aluminum-porphyrin-based PIPs are featured with high surface areas, prominent CO₂ adsorptive capacities, rigid porphyrin skeletons, and flexible ionic pendants, as well as the matched amounts and spatial positions of metal centers and ionic sites, in which is demonstrated to be one of the quite competitive catalysts. Therefore, this strategy of introducing ionic components into the porphyrin frameworks as flexible side chains rather than main chains and adjusting the reactivity ratios of comonomers by structure-oriented methods, provides feasible guidance for the multifunctionalization of metalloporphyrin-based POPs, thereby increasing the accessibility of multiple active sites and improving their synergistic catalytic behavior.

iClick synthesis of network metallopolymers

Described is an approach to preparing the first iClick network metallopolymers with porous properties. Treating digoldazido complex 2-AuN3 with trigoldacetylide 3-AuPPh3 or 3-AuPEt3, trialkyne 3-H, tetragoldacetylide 4-AuPPh3, or tetraalkyne 4-H in CH₂Cl₂ affords five iClick network metallopolymers 5-AuPPh3, 5-AuPEt3, 5-H, 6-AuPPh3, and 6-H. Confirmation of the iClick network metallopolymers comes from FTIR, ¹³C solid-state cross-coupling magic angle spinning (CPMAS) NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and nitrogen and CO₂ sorption analysis. Employing model complexes 7-AuPPh3, 7-AuPEt3, 7-H, 8-AuPPh3, and 8-H provides structural insights due to the insolubility of iClick network metallopolymers.

A heterogeneous Rh/CPOL-BINAPa&PPh3 catalyst for hydroformylation of olefins: chemical and DFT insights into active species and the roles of BINAPa and PPh3

A reusable Rh/CPOL-BINAPa&PPh3 catalyst was used for heterogeneous hydroformylation of olefins, affording the corresponding linear aldehydes with excellent regioselectivities and high TON values. The active Rh–H species were studied in detail.

Mechanical Bond Approach to Introducing Self-Adaptive Active Sites in Covalent Organic Frameworks for Zinc-Catalyzed Organophosphorus Degradation

Mechanically interlocked molecules (MIMs) with discrete molecular components linked through a mechanical bond in space can be harnessed for the operation of molecular switches and machines, which shows huge potential to imitate the dynamic response of natural enzymes. In this work, rotaxane compounds were adopted as building monomers for the synthesis of a crown-ether ring mechanically intercalated covalence organic framework (COF). This incorporation of MIMs into open architecture implemented large amplitude motions, whose wheel slid along the axle in response to external stimulation. After impregnation with Zn²⁺ ions, the relative locations of two zinc active sites (crown-ether coordinated Zn(II) and bipyridine coordinated Zn(II)) are endowed with great flexibility to fit the conformational transformation of an organophosphorus agent during the hydrolytic process. Notably, the resulting self-adaptive binuclear zinc center in a crown-ether-threaded COF network is endowed with a record catalytic ability, with a rate over 85.5 μM min^-1 for organophosphorus degradation. The strategy of synthesis for porous artificial enzymes through the introduction of mechanically bound crown ether will enable significant breakthroughs and new synthetic concepts for the development of advanced biomimetic catalysts.

Argentivorous Molecules with Oxyethylene Chains in Side-Arms: Silver Ion-Induced Selectivity Changes toward Alkali Metal Ions

Argentivorous molecules with mono, di, tri, tetra, and penta-oxyethylene chains in aromatic side-arms were prepared (L1-L5). Titration experiments using proton nuclear magnetic resonance and cold electrospray ionization (cold-spray ionization, CSI) mass spectrometry showed that silver ions were trapped in the cyclen moiety and the arranged oxyethylene chains of the side-arms when two equivalents of silver ions were added. The silver complexes formed by adding one equivalent of silver ion to L2-L5 bind alkali metal ions using the oxyethylene chains; alkali metal ion-induced CSI mass spectral changes of L2-L5 were measured in the absence and presence of silver ions to compare the binding properties of the ligand for Li⁺, Na⁺, and K⁺ ions. As a result, the intensity ratios of [L + H + M]²⁺/[L + H]⁺ in L1-L3 were almost zero or very low. L4 and L5, which have tetra(oxyethylene) and penta(oxyethylene) chains, respectively, bind a larger size of alkali metal ions. On the other hand, in the presence of silver ions, the ratio for [L + Ag + M]²⁺/[L + H]⁺ (M = Li, Na, K) in L2-L5 was increased. The highest [L + Ag + M]²⁺/[L + H]⁺ ratios for K⁺ were observed in L4 and L5, while selectivity for Na⁺ was observed in the case of L2 and L3. These results indicate that the increased binding ability and selectivity by L2-L5 are due to the arrangement of oxyethylene chains by the conformational change of the aromatic side-arms. The Ag⁺-induced carbon-13 nuclear magnetic resonance spectral changes suggested that the second and third oxyethylene units, close to the benzene, are involved in the coordination of the second metal ion.

An anthracene extended viologen-incorporated ionic porous organic polymer for efficient aerobic photocatalysis and antibacterial activity

A new conjugated ionic porous organic polymer (AN-POP), incorporated with anthracene-extended viologen, has been rationally designed and prepared to explore its dual functions in photocatalytic oxidation and bacterial killing. Compared with its anthracene-free counterpart (BD-POP), AN-POP showed a superior photocatalytic oxidation performance and antibacterial activity demonstrating the critical role of an anthracene-extended viologen structure.

One Robust Microporous TmIII-Organic Framework for Highly Catalytic Activity on Chemical CO2 Fixation and Knoevenagel Condensation

In terms of documented references, multifunctional MOFs with high catalytic performance could be constructed from the combination of metal cations and polycarboxyl-pyridine ligands, which could efficiently endow crystallized porous frameworks with the coexisting Lewis acid-base properties. Thus, by employing a ligand-directed synthetic strategy, the exquisite combination of wave-like inorganic chains of [Tm(CO₂)₃(OH₂)]_n and mononuclear units of [Tm(CO₂)₄(OH₂)₂] with the aid of the specially designed ligand of 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine (H₅BDCP) generates one highly robust microporous framework of {(Me₂NH₂)[Tm₃(BDCP)₂)(H₂O)₃]·4DMF·H₂O}_n (simplified as NUC-25), which contains near-rectangular nanochannels and large solvent-residing voids. Furthermore, the activated state of NUC-25 with the removal of associated water molecules is a rarely reported bifunctional heterogeneous catalyst due to the coexistence of Lewis acid-base sites including 6-coordinated Tm³⁺ ions, uncoordinated carboxyl oxygen atoms, and N_pyridine atoms. Just as expected, NUC-25 exhibits greatly high catalytic activity for the cycloaddition reaction of epoxides with CO₂ into alkyl cyclic carbonates under bland solvent-free conditions, which should be ascribed to the polarity of nitrogen-containing pyridine heterocycles as Lewis base sites on the inner surface of nano-caged voids except for recognized Lewis acid sites of rare earth cations. Moreover, the excellent pore-size-dependent catalytic property for Knoevenagel condensation reactions confirms that NUC-25 can be viewed as a recyclable bifunctional heterogeneous catalyst. Therefore, these results strongly demonstrate that microporous MOFs assembled from pre-designed polycarboxyl-heterocyclic ligands display better catalytic performance not only for chemical CO₂ fixation but also for Knoevenagel condensation reactions.

Vinylene-bridged donor–acceptor type porous organic polymers for enhanced photocatalysis of amine oxidative coupling reactions under visible light

Two vinylene-bridged D–A structural POPs are constructed by the electron-rich triarylamine and electron-deficient tricyanomesitylene, which exhibited highly effective photocatalytic activities for aerobic oxidative coupling of amines to imine.

Architectures and Applications of BODIPY-Based Conjugated Polymers

Conjugated polymers generally contain conjugated backbone structures with benzene, heterocycle, double bond, or triple bond, so that they have properties similar to semiconductors and even conductors. Their energy band gap is very small and can be adjusted via chemical doping, allowing for excellent photoelectric properties. To obtain prominent conjugated materials, numerous well-designed polymer backbones have been reported, such as polyphenylenevinylene, polyphenylene acetylene, polycarbazole, and polyfluorene. 4,4'-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based conjugated polymers have also been prepared owing to its conjugated structure and intriguing optical properties, including high absorption coefficients, excellent thermal/photochemical stability, and high quantum yield. Most importantly, the properties of BODIPYs can be easily tuned by chemical modification on the dipyrromethene core, which endows the conjugated polymers with multiple functionalities. In this paper, BODIPY-based conjugated polymers are reviewed, focusing on their structures and applications. The forms of BODIPY-based conjugated polymers include linear, coiled, and porous structures, and their structure-property relationship is explored. Also, typical applications in optoelectronic materials, sensors, gas/energy storage, biotherapy, and bioimaging are presented and discussed in detail. Finally, the review provides an insight into the challenges in the development of BODIPY-based conjugated polymers.