Label-free and "signal-on" homogeneous photoelectrochemical cytosensing strategy for ultrasensitive cancer cell detection

Enhanced Label-Free Photoelectrochemical Strategy for Pollutant Detection: Using Surface Oxygen Vacancies-Enriched BiVO4 Photoanode

Label-free photoelectrochemical sensors have the advantages of high sensitivity and a simple electrode structure. However, its performance is greatly limited due to the photoactive materials' weak photoactivity and poor stability. Herein, a robust homogeneous photoelectrochemical (PEC) aptasensor has been constructed for atrazine (ATZ) based on photoetching (PE) surface oxygen vacancies (Ov)-enriched Bismuth vanadate (BiVO4) (PE-BVO). The surface of the Ov improves the carrier separation ability of BiVO4, thus providing a superior signal substrate for the sensor. A thiol molecular layer self-assembled on PE-BVO acts as a blocker, while 2D graphene acts as a signal-on probe after release from the aptamer-graphene complex. The fabricated sensor has a wide linear detection range of 0.5 pM to 10.0 nM and a low detection limit of 0.34 pM (S/N = 3) for ATZ. In addition, it can efficiently work in a wide pH range (3-13) and high ionic strength (∼6 M Na+), which provides promising opportunities for detecting environmental pollutants under complex conditions.

MOFs-derived Co3O4@MnO2@Carbon dots with enhanced nanozymes activity for photoelectrochemical detection of cancer cells in whole blood

Nanozymes have attracted widespread attention, and rationally designing high-activity nanozymes to improve their application performance are a long-term objective. Herein, taking metal-organic frameworks-derived Co3O4 polyhedron with large surface area and high porosity as nanoconfinement carriers, Co3O4@MnO2@CDs polyhedron was successfully synthesized by the room-temperature reduction of MnO4- ions and physical load of carbon dots (CDs). Through cancer cells-triggered double antibody sandwich strategy, the Co3O4@MnO2@CDs polyhedron were introduced to the TiO2 nanoparticle (NPs) modified electrode, leading to the decreased photocurrent. The Co3O4@MnO2@CDs polyhedron can not only quench the photocurrent of TiO2 NPs, also act as nanozymes to catalyze precipitates. Moreover, the precipitates can not only reduce the photoelectrochemical (PEC) response, also increase the quenching capacity of the Co3O4@MnO2@CDs polyhedron. Additionally, the steric hindrance effect of the Co3O4@MnO2@CDs-Ab conjugates further weaken the photocurrent. Based on the multifunctional Co3O4@MnO2@CDs polyhedron, the proposed PEC biosensor for the detection of A549 cancer cells exhibits a wide linear range from 102 to 106 cells/mL and a low detection limit of 11 cells/mL. Furthermore, this strategy can differentiate between lung cancer patients and healthy individuals. The designed multifunctional Co3O4@MnO2@CDs nanozymes provide a new horizon for PEC detection of cancer cells, and may have great potential in early clinical diagnosis and biomedical research.

Progress in Electrochemical Immunosensors with Alkaline Phosphatase as the Signal Label

Electrochemical immunosensors have shown great potential in clinical diagnosis, food safety, environmental protection, and other fields. The feasible and innovative combination of enzyme catalysis and other signal-amplified elements has yielded exciting progress in the development of electrochemical immunosensors. Alkaline phosphatase (ALP) is one of the most popularly used enzyme reporters in bioassays. It has been widely utilized to design electrochemical immunosensors owing to its significant advantages (e.g., high catalytic activity, high turnover number, and excellent substrate specificity). In this work, we summarized the achievements of electrochemical immunosensors with ALP as the signal reporter. We mainly focused on detection principles and signal amplification strategies and briefly discussed the challenges regarding how to further improve the performance of ALP-based immunoassays.

Target-triggered hybridization chain reaction for ultrasensitive dual-signal miRNA detection

A signal amplification sensing system with target-triggered DNA cascade reaction combined with dual-signal readout technology was designed for ultrasensitive analysis of miRNA. The highly conductive metal organic frameworks (MOFs) derivative, N-doped carbon dodecahedron (N-PCD) was deposited with gold nanoparticles as the electrode substrate, which could assist the electron transfer between the molecular probe and the electrode surface, and could remarkably enhance electrochemical response. Tetrahedral DNA nanostructure (T4-DNA) with high structural stability and mechanical stiffness was designed to improve the loading capacity and binding efficiency of the target, thus increasing the sensitivity of the system. The non-enzymatic amplification method based on the DNA cascade reaction allows the electrochemical responses from dual signal DNA probes labeled with ferrocene (Fc) and methylene blue (MB), respectively in turn to improve the reliability of detection. Under optimal conditions, the sensor has a linear range of 5-1.0 × 10⁴ fM, and the limit of detection is as low as 1.92 fM and 3.74 fM for Fc and MB labeled probe, respectively. This strategy raises the promising application for the rapid detection of miRNA targets with low abundance in complex biological systems.

Electrochemiluminescence Biosensor for Hyaluronidase Based on the Adjustable Electrostatic Interaction between the Surface-Charge-Controllable Nanoparticles and Negatively Charged Electrode

A novel electrochemiluminescence (ECL) biosensor for hyaluronidase (HAase) based on the adjustable electrostatic interaction between the surface-charge-controllable nanoparticles and negatively charged electrode has been devised. Hyaluronic acid (HA)-coated amino-modified ruthenium bipyridine-doped silica nanoparticles (Ru@SiO₂-NH₂@HA NPs) have been synthesized and act as ECL indicators, and the surface of this particle is negatively charged because HA contains a large amount of OH- and COO-. The strong electrostatic repulsion between the Ru@SiO₂-NH₂@HA NPs and negatively charged indium tin oxide (ITO) electrode surface leads to the detection of a low-intensity ECL signal. In the presence of HAase, the HA on the surface of the Ru@SiO₂-NH₂@HA NPs can be decomposed, and the particles can be transformed into positively charged amino-modified ruthenium bipyridine-doped silica nanoparticles (Ru@SiO₂-NH₂ NPs), which can be concentrated near the surface of the ITO electrode through electrostatic attraction, and result in the detection of an enhanced ECL signal. The ECL of the system has a good linear relationship with HAase concentration in the range of 2.0-60 U/mL, and the limit of detection was 0.37 U/mL. The designed biosensor had been applied to detect the target in real samples with satisfied results.

Aptamer Embedded Arch-Cruciform DNA Assemblies on 2-D VS2 Scaffolds for Sensitive Detection of Breast Cancer Cells

Arch-cruciform DNA are self-assembled on AuNPs/VS₂ scaffold as a highly sensitive and selective electrochemical biosensor for michigan cancer foundation-7 (MCF-7) breast cancer cells. In the construction, arch DNA is formed using two single-strand DNA sequences embedded with the aptamer for MCF-7 cells. In the absence of MCF-7 cells, a cruciform DNA labeled with three terminal biotin is bound to the top of arch DNA, which further combines with streptavidin-labeled horseradish peroxidase (HRP) to catalyze the hydroquinone-H₂O₂ reaction on the electrode surface. The presence of MCF-7 cells can release the cruciform DNA and reduce the amount of immobilized HRP, thus effectively inhibiting enzyme-mediated electrocatalysis. The electrochemical response of the sensor is negatively correlated with the concentration of MCF-7 cells, with a linear range of 10~1 × 10⁵ cells/mL, and a limit of detection as low as 5 cells/mL (S/N = 3). Through two-dimensional materials and enzyme-based dual signal amplification, this biosensor may pave new ways for the highly sensitive detection of tumor cells in real samples.

Recent Development of Nanomaterials-Based Cytosensors for the Detection of Circulating Tumor Cells

The accurate analysis of circulating tumor cells (CTCs) holds great promise in early diagnosis and prognosis of cancers. However, the extremely low abundance of CTCs in peripheral blood samples limits the practical utility of the traditional methods for CTCs detection. Thus, novel and powerful strategies have been proposed for sensitive detection of CTCs. In particular, nanomaterials with exceptional physical and chemical properties have been used to fabricate cytosensors for amplifying the signal and enhancing the sensitivity. In this review, we summarize the recent development of nanomaterials-based optical and electrochemical analytical techniques for CTCs detection, including fluorescence, colorimetry, surface-enhanced Raman scattering, chemiluminescence, electrochemistry, electrochemiluminescence, photoelectrochemistry and so on.

Self-passivated CuV2O6 as a universal photoelectrode material for reliable and accurate photoelectrochemical sensing

Photoelectrochemical (PEC) detection has attracted intensive attention during the past decade. Currently, most research focuses on improving the sensitivity and selectivity of the PEC sensor, but the issue of the stability of the photoelectrode material under the testing environment is often ignored or lacks in-depth investigation. Herein, we develop a novel CuV2O6 photoelectrode exhibiting superior stability under the testing environment through self-passivation. CuV2O6-based PEC sensors are fabricated for the first time for highly selective carcinoembryonic antigen (CEA) and human serum alpha fetoprotein (AFP) detection. The CuV2O6 shows great potential as a universal photoelectrode material for reliable and accurate PEC detection of macromolecules.

A new photoelectrochemical biosensor based on FeOOH and exonuclease III-aided dual recycling signal amplification for HPV-16 detection

Herein, based on iron oxyhydroxide (FeOOH) as the photoactive material and exonuclease III (exo III)-aided dual recycling signal amplification, a new photoelectrochemical (PEC) biosensor was successfully developed for human papillomavirus-16 (HPV-16) detection with a wide linear range from 0.5 fM to 1 nM and a low detection limit of 0.17 fM.