Self-regenerative noble metal catalysts supported on high-entropy oxides

Squeezing Out Nanoparticles from Perovskites: Controlling Exsolution with Pressure

Nanoparticle exsolution has emerged as a versatile method to functionalize oxides with robust metallic nanoparticles for catalytic and energy applications. By modifying certain external parameters during thermal reduction (temperature, time, reducing gas), some morphological and/or compositional properties of the exsolved nanoparticles can be tuned. Here, it is shown how the application of high pressure (<100 bar H2) enables the control of the exsolution of ternary FeCoNi alloyed nanoparticles from a double perovskite. H2 pressure affects the lattice expansion and the nanoparticle characteristics (size, population, and composition). The composition of the alloyed nanoparticles could be controlled, showing a reversal of the expected thermodynamic trend at 10 and 50 bar, where Fe becomes the main component instead of Ni. In addition, pressure drastically lowers the exsolution temperature to 300 °C, resulting in unprecedented highly-dispersed and small-sized nanoparticles with a similar composition to those obtained at 600 °C and 10 bar. The mechanisms behind the effects of pressure on exsolution are discussed, involving kinetic, surface thermodynamics, and lattice-strain factors. A volcano-like trend of the exsolution extent suggests that competing pressure-dependent mechanisms govern the process. Pressure emerges as a new design tool for metallic nanoparticle exsolution enabling novel nanocatalysts and surface-functionalized materials.

Toluene catalytic oxidation over gold catalysts supported on cerium-based high-entropy oxides

A series of cerium-based high-entropy oxide catalysts (the ratio of CeO2 and HEO is 1:1) was prepared by a solid-state reaction method, which exploit their unique structural and performance advantages. The Ce-HEO-T samples can achieve 100% toluene conversion rate above 328°C when they were used as catalysts directly. Subsequently, the Ce-HEO-500 exhibited the lowest temperature for toluene oxidation was used as a support to deposit different amounts of Au for a further performance improvement. Among all of prepared samples, Au/Ce-HEO-500 with a moderate content of Au (0.5 wt%) exhibited the lowest temperature for complete combustion of toluene (260°C), which decreased nearly 70°C compared with Ce-HEO-500 support. Moreover, it also showed excellent stability for 60 h with 98% toluene conversion rate. Most importantly, under the condition of 5 vol.% H2O vapour, the toluene conversion rate remained unchanged and even increased slightly compared with that in dry air, exhibiting excellent water resistance. Combined with the characterizations of XRD, SEM, TEM, BET, Raman, H2-TPR and XPS, it was found that the high dispersion of active Au NPs, the special high-entropy structure and the synergistic effect between Au and Ce, Co, Cu are the key factors when improving the catalytic performance in the Au/Ce-HEO-500 catalyst.

In situ construction of A-site high-entropy perovskites with interfacial CeO2 for a high-performance IT-SOFC air-electrode

Developing an intermediate-temperature solid oxide fuel cell (IT-SOFC) is one of the most promising ways of achieving carbon neutrality, but its air-electrode is restricted by the conflict between the sluggish catalytic activity and durability. Herein, an A-site high-entropy perovskite composite La0.2Ba0.2Sr0.2Ca0.2Ce0.2-xCoO3-δ-xCeO2 (LBSCCC-CeO2) air-electrode material is fabricated via a one-step self-constructing strategy, which shows excellent oxygen reduction activity and stability due to the high-entropy structure and the synergy effect between LBSCCC and interfacial CeO2. This work provides a new way of fabricating high-performance air-electrodes in IT-SOFCs.

Novel nano spinel-type high-entropy oxide (HEO) catalyst for hydrogen production using ethanol steam reforming

Catalyst sintering caused by high temperature operating conditions during ethanol steam reforming (ESR) is a common issue for traditional catalysts with low Tammann temperature metals. In recent years, high entropy oxides have been popular in thermal catalysis due to their special thermodynamics and kinetics characteristics, which is expected to be a suitable approach for enhancing catalyst stability. This paper first reports the application of HEO in ESR and the characterization. The results exhibited a nano structure (CoCrFeNiAl)₃O₄ HEO with a spinel-phase and was successfully synthesized by a polyol hydrothermal precipitation-calcination method. An abundance of oxygen vacancies were formed, and were further enriched in a hydrogen atmosphere as the M-O bond opened. Interestingly, its self-reorganization featured the rendered the metals spilling out of the HEO bulk phase as active species for hydrogen production during ESR, whereas the isolated metal cation randomly dissolved into the parent metal oxide cell again after the reaction instead of agglomerating over the catalyst surface. This gave the (CoCrFeNiAl)₃O₄ a large number of dispersed active sites, as well as a high thermal stability. In addition, 81% of the hydrogen yield as well as 85% of H₂ selectivity were achieved at 600 °C. This research might offer possibilities for the development of thermal catalytic hydrogen production under high temperature conditions such as steam reforming.

Nonclassical Strong Metal-Support Interactions for Enhanced Catalysis

Strong metal-support interaction (SMSI), which encompasses reversible encapsulation and de-encapsulation and modulation of surface adsorption properties, imposes great impacts on the performance of heterogeneous catalysts. Recent development of SMSI has surpassed the prototypical encapsulated Pt-TiO₂ catalyst, affording a series of conceptually novel and practically advantageous catalytic systems. Here we provide our perspective on recent progress in nonclassical SMSIs for enhanced catalysis. Unravelling the structural complexity of SMSI necessitates the combination of multiple characterization techniques at different scales. Synthesis strategies leveraging chemical, photonic, and mechanochemical driving forces further expand the definition and application scope of SMSI. Exquisite structure engineering permits elucidation of the interface, entropy, and size effect on the geometric and electronic characteristics. Materials innovation places the atomically thin two-dimensional materials at the forefront of interfacial active site control. A broader space is awaiting exploration, where exploitation of metal-support interactions brings compelling catalytic activity, selectivity, and stability.

Defect Engineering of Ceria Nanocrystals for Enhanced Catalysis via a High-Entropy Oxide Strategy

Introducing transition-metal components to ceria (CeO₂) is important to tailor the surface redox properties for a broad scope of applications. The emergence of high-entropy oxides (HEOs) has brought transformative opportunities for oxygen defect engineering in ceria yet has been hindered by the difficulty in controllably introducing transition metals to the bulk lattice of ceria. Here, we report the fabrication of ceria-based nanocrystals with surface-confined atomic HEO layers for enhanced catalysis. The increased covalency of the transition-metal-oxygen bonds at the HEO-CeO₂ interface promotes the formation of surface oxygen vacancies, enabling efficient oxygen activation and replenishment for enhanced CO oxidation capabilities. Understanding the structural heterogeneity involving bulk and surface oxygen defects in nanostructured HEOs provides useful insights into rational design of atomically precise metal oxides, whose increased compositional and structural complexities give rise to expanded functionalities.

Performance of high temperature phase-stable high entropy oxide (MgCuMnCoFe)O x in catalytic wet air oxidation of chloroquine phosphate

With the continuous spread of COVID-19, the water pollution problems caused by the abuse of chloroquine phosphate (CQP) as an antiviral drug have attracted wide attention. The cubic Fm-3m spinel high entropy oxide (HEO)-(MgCuMnCoFe)O _x was prepared by coprecipitation method as the catalytic wet air oxidation (CWAO) catalyst to treat CQP simulated wastewater. Through electron spin resonance (ESR) analysis, HEO will stimulate the production of superoxide radical (·O₂ ^-) and hydroxyl radical (·OH) in the wet air oxidation (WAO) process, which accelerates the degradation and mineralization of CQP. Through response surface method (RSM) optimization, the optimal degradation conditions of CQP in CWAO were proposed: initial oxygen pressure of 15 bar, catalyst dosage of 1.4 g/L and temperature of 230 °C. The advantages of HEO in CWAO were analyzed by principal component analysis (PCA). The degradation mechanism of CQP in CWAO by (MgCuMnCoFe)O _x were explored. This work provides a new idea for the rapid development of HEO in the field of environmental catalysis.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07271-z.

Interface and Charge Induced Molecular Self-assembly Strategy for the Synthesis of Reduced Graphene Oxide Coated with Mesoporous Platinum Sheets

The design of porous noble metal catalysts holds great promise in various electrocatalytic applications. However, it is still a challenge to improve the durability performance through constructing stable framework. Here, we develop an interface and charge induced strategy to synthesize large-sized continuous reduced graphene oxide@mesoporous platinum (denoted as rGO@mPt) sheets under kinetic control by molecular self-assembly design. Graphene oxide (GO) is a promising large-sized growth interface for platinum. Cationic surfactant dioctadecyldimethylammonium chloride bridges the negatively charged GO and platinum precursors, while creating interconnected mesopores. The successful synthesis of rGO@mPt sheets relies on proper kinetic control, which is achieved by controlling pH, temperature and the complexation of bromide ions. rGO@mPt sheets present strong crystallinity with a pure face-centered cubic Pt phase. Worm-like mesostructures with an average pore size of 2.2 nm exist throughout the sheets. rGO@mPt sheets possess both stable framework and abundant active sites, which markedly improve the durability on methanol oxidation reaction (MOR) while maintaining relatively good catalytic activity. Long-term stability test shows a slight loss of 1.2% activity after 250 cycles. Amperometric i-t curves reveal the mass current three times higher compared to commercial Pt/C at 3000 s. This article is protected by copyright. All rights reserved.

High-entropy materials for catalysis: A new frontier

Entropy plays a pivotal role in catalysis, and extensive research efforts have been directed to understanding the enthalpy-entropy relationship that defines the reaction pathways of molecular species. On the other side, surface of the catalysts, entropic effects have been rarely investigated because of the difficulty in deciphering the increased complexities in multicomponent systems. Recent advances in high-entropy materials (HEMs) have triggered broad interests in exploring entropy-stabilized systems for catalysis, where the enhanced configurational entropy affords a virtually unlimited scope for tailoring the structures and properties of HEMs. In this review, we summarize recent progress in the discovery and design of HEMs for catalysis. The correlation between compositional and structural engineering and optimization of the catalytic behaviors is highlighted for high-entropy alloys, oxides, and beyond. Tuning composition and configuration of HEMs introduces untapped opportunities for accessing better catalysts and resolving issues that are considered challenging in conventional, simple systems.