Enhanced Photocatalytic Nitrogen Reduction via Bismuth Nanoparticle-Decorating ZnCdS Solid Solution

The construction of photocatalysts with a surface plasmon resonance effect (SPR) has been demonstrated as a highly effective strategy for enhancing photocatalytic efficiency. In this paper, we synthesized a catalyst with bismuth metal loaded on ZnCdS nanospheres for an efficient photocatalytic nitrogen reduction reaction (PNRR). The SPR effect induced by Bi nanoparticles under light excitation significantly promoted the ammonia production efficiency of the photocatalyst. Under air ambient conditions with lactic acid as the sacrificial agent, the photocatalytic NH4+ yield of 3% Bi@ZnCdS was 58.93 μmol·g-1·h-1, which exhibited an approximately 7.7 times that of the pure phase ZnCdS. The experimental characterization results demonstrate that the incorporation of metallic bismuth enhances the light absorption capacity of the catalyst and improves the separation efficiency of the photogenerated carriers. Theoretical calculations proved that Bi NPs provide more photogenerated electrons to convert N2 to NH3 for solid-solution ZnCdS. This work presents a novel concept for the development of advanced plasma nanomaterials to enhance the photocatalytic nitrogen fixation reaction.

Construction of Ni3+-rich nanograss arrays for boosting alkaline water oxidation

The rational design of high-efficiency electrocatalysts for application in water oxidation in alkaline media remains a great challenge. In this paper, Ni³⁺-rich nanograss-like Mo-doped Ni₃S₂/NiS/VS arrays grown on nickel foam (denoted as Mo-NiVS@NF) have been successfully constructed through a hydro/solvothermal method. Interestingly, Mo-NiVS@NF exhibits superior catalytic OER performance, needing an overpotential of 217 mV to drive a current density of 10 mA cm^-2, outperforming most previously reported NiS-based electrocatalysts. The result indicates that the Ni³⁺-rich active sites caused by the modulation of the electronic structure environment via the introduction of V and high-valency Mo play an important role in the high activity for the OER. Moreover, this catalyst shows high long-term electrochemical durability.

Heteroatom-Doped Amorphous Cobalt-Molybdenum Oxides as a Promising Catalyst for Robust Hydrogen Evolution

The simultaneous manipulation of the catalytic activity and intrinsic electrical conductivity in a unified system is difficult yet meaningful to unravel the possible strategy that can enhance the hydrogen evolution reaction (HER) performance. Therefore, we propose a simple strategy to enhance the HER performance based on low-temperature redox reaction with ZIF-67@ZIF-8 as a sacrificial template to prepare zinc-doped amorphous CoMo₈O_x (denoted as Zn/aCMO). Benefiting from the excellent compositional- and amorphous-based structural advantages of more exposure active sites, optimized electron transfer as well as a stable frame structure, the as-prepared electrode can drive hydrogen evolution at current densities of 10, 50, and 100 mA cm^-2, which need ultralow overpotentials of 59, 138, and 189 mV, respectively, and the Tafel slope of the electrode was 66.2 mV dec^-1 (1 M KOH). Meanwhile, the intrinsic activity of the prepared low-cost electrocatalyst was also determined, and the turnover frequency was up to 1.49 s^-1 at an overpotential of 100 mV. In addition, after continuous testing for 160 h, there was a slight decay at the overpotential of 130 mV.

Highly efficient sub-nanometer RuxCuyP2 nanoclusters designed for hydrogen evolution under alkaline media

Design of highly active and stable non-precious electrocatalysts towards hydrogen evolution reaction (HER) is a hot research topic in low cost, clean and sustainable hydrogen energy field, yet remaining the important challenge caused by the sluggish reaction kinetics for water-alkali electrolyzers. Herein, a robust electrocatalyst is proposed by designing a novel sub-nanometer of copper and ruthenium bimetallic phosphide nanoclusters (Ru_xCu_yP₂) supported on a graphited carbon nanofibers (CNF). Uniform Ru_xCu_yP₂ (~1.90 nm) on the surface of CNF are obtained by introducing the dispersed Ru, thereby improving the intrinsic activity for HER. On optimizing the Ru ratio, the (x = y = 1) RuCuP₂/CNF catalyst exhibits an excellent HER electroactivity with an overpotential of 10 mV in 1.0 M NaOH electrolyte to produce 10 mA cm^-2 current density, which is lower than commercial 20% Pt/C in alkaline solution. Moreover, the kinetic study demonstrated that electrochemical activation energies for HER of RuCuP₂/CNF is 20.7 kJ mol^-1 highest among different ratio bimetallic phosphide. This simple, cost-effective, and environmentally friendly methodology can pave the way for exploitation of bimetallic phosphide nanoclusters for catalyst design.

Interface-engineered Co3S4/CoMo2S4nanosheets as efficient bifunctional electrocatalysts for alkaline overall water splitting

Exploring bifunctional electrocatalysts with high efficiency, inexpensive, and easy integration is still the daunt challenge for the production of hydrogen on a large scale by means of water electrolysis. In this work, a novel free-standing Co₃S₄/CoMo₂S₄heterostructure on nickel foam by a facial hydrothermal method is demonstrated to be an effective bifunctional electrocatalyst for overall water splitting (OWS). The synthesized Co₃S₄/CoMo₂S₄electrocatalyst achieves ultralow overpotentials of 143 mV@10 mA cm^-2for hydrogen evolution reaction (HER) and 221 mV@25 mA cm^-2for oxygen evolution reaction (OER), respectively, in 1 M KOH. Moreover, it presents a greatly improved durability and stability under operando electrochemical conditions. When used as catalysts for OWS, the Co₃S₄/CoMo₂S₄-3//Co₃S₄/CoMo₂S₄-3 electrodes just need 1.514 V to make it to the current density of 10 mA cm^-2. It is supposed that the introduction of heterogeneous interface between Co₃S₄and CoMo₂S₄could give rise to plentiful active sites and enhanced conductivity, and thus boost excellent catalytic performances. Moreover, the porous feature of free-standing nanosheets on nickel foam could benefits catalytic performances by accelerating charge transport and releasing bubbles rapidly. This work proposes a bifunctional catalyst system with the heterogeneous interface, which could be used in a sustainable green energy system.

An Extreme Energy-Saving Carbohydrazide Oxidization Reaction Directly Driven by Commercial Graphite Paper in Alkali and Near-Neutral Seawater Electrolytes

The energy-saving anode with low oxidization potential has been an intriguing pursue for earth-abundant seawater electrolysis. In this paper, we first introduced a superior energy-saving carbohydrazide oxidization reaction catalysis system in the anode section, which can be driven by commercial graphite paper with good durability. Combining this catalysis reaction and common graphite paper, the lowest anodic potentials 0.63 V (vs RHE) and 1.09 V (vs RHE) were obtained for driving a 10 mA/cm² current density in alkali and near-neutral seawater electrolytes, respectively, outperforming all the as-reported alkali or near-neutral seawater catalysts accordingly to the best of our knowledge.

Novel heterostructure Cu2S/Ni3S2 coral-like nanoarrays on Ni foam to enhance hydrogen evolution reaction in alkaline media

We fabricated a heterostructure Cu2S/Ni3S2 nanosheet array, which can accelerate charge transfer and provide more active sites. This work provides a promising non-noble metal electrocatalyst for water splitting under alkaline conditions.