Controllable Electrochemical Liberation of Hydrogen from Sodium Borohydride

Sodium borohydride (NaBH4 ) has earned recognition as a promising hydrogen carrier, attributed to its exceptional hydrogen storage capacity, boasting a high theoretical storage capacity of 10.8 wt %. Nonetheless, the utilization of traditional pyrolysis and hydrolysis methods still presents a formidable challenge in achieving controlled hydrogen generation especially under ambient conditions. In this work, we report an innovative electrochemical strategy for production H2 by coupling NaBH4 electrooxidation reaction (BOR) at anode in alkaline media with hydrogen evolution reaction (HER) at cathode in acidic media. To implement this, we have developed a bifunctional electrocatalyst denoted as Pd-Mo2 C@CNTs, wherein Pd nanoparticles are grown in situ on Mo2 C embedded within N-doped carbon nanotubes. This electrocatalyst demonstrates exceptional performance in catalyzing both alkaline BOR and acidic HER. We have developed a hybrid acid/alkali cell, utilizing Pd/Mo2 C@CNTs as the anode and cathode electrocatalysts. This configuration showcases remarkable capabilities for self-sustained, precise, and uninterrupted indirect release of H2 stored in NaBH4 , even at high current densities of 100 mA cm-2 with a Faraday efficiency approaching 100 %. Additionally, this electrochemical device exhibits significant promise as a fuel cell, with the ability to deliver a maximum power density of 20 mW cm-2 .

Porous Ni-Cu Alloy Dendrite Anode Catalysts with High Activity and Selectivity for Direct Borohydride Fuel Cells

A porous Ni-Cu alloy dendrite catalyst covered by Ni nanoparticles (Ni-np@NC) has been fabricated by an ultrafast and controllable strategy. The research results show that the morphology of the Ni-Cu alloy depends strongly on the Cu²⁺concentration. Moreover, the Ni-np@NC catalyst demonstrates excellent selectivity and activity toward the borohydride oxidation reaction (BOR). Furthermore, on the Ni-np@NC catalyst electrode, the overpotential merely requires 169 mV at a current density of 10 mA cm^-2 for BOR, and the fuel efficiency may reach 70%. The direct borohydride fuel cell using the Ni-np@NC/C anode can export a maximum power density of 218 mW cm^-2, much higher than that using the noble-based anode reported in the literature. The remarkable enhancement of Ni-np@NC catalyst performances is on the back of the unique morphology of porous dendrite covered by nanoparticles and the introduction of Cu.

In situ fluorescence yield soft X-ray absorption spectroscopy of electrochemical nickel deposition processes with and without ethylene glycol

The electrochemical Ni deposition at a platinum electrode was investigated in a plating nickel bath in the presence and absence of ethylene glycol (EG) using fluorescence yield soft X-ray absorption spectroscopy (FY-XAS) in the Ni L_2,3-edge and O K-edge regions under potential control. At ≤+0.35 V vs. the reversible hydrogen electrode (RHE), the electrochemical Ni deposition was detected by the Ni L_2,3-edge FY-XAS in the presence of EG whereas almost no such event was observed in the absence of EG. A drastic decrease of FY-XAS intensities in the O K-edge region was also observed in the presence of EG at >+0.35 V vs. RHE, suggesting that the nano-/micro-structured Ni deposition initiated by the removal of water molecules occurs on the Pt electrode. The complex formation of Ni²⁺ with EG and the adsorption of EG on the Ni surface could play an important role in the Ni deposition. This study demonstrates that the in situ FY-XAS is a powerful and surface-sensitive technique to understand (electro)chemical reactions including polyol synthesis and electrocatalysis at solid–liquid interfaces.

Schematic drawing of electrochemical reactions of the Pt-coated SiC electrode, which separates the vacuum and the solution containing Ni²⁺ and ethylene glycol, in our spectro-electrochemical setup for the FY-XAS.

Platinum Nanoparticles Modified Copper/Titanium Electrodes as Electrocatalysts for Borohydride Oxidation

In this study, sodium borohydride oxidation has been investigated on the platinum nanoparticles modified copper/titanium catalysts (PtNPsCu/Ti), which were fabricated by employing the electroless copper plating and galvanic displacement technique. ICP-OES, XRD, FESEM, and EDX have been used to characterize PtNPsCu/Ti catalysts’ composition, structure, and surface morphology. The oxidation of sodium borohydride was examined on the PtNPsCu/Ti catalysts using cyclic voltammetry and chrono-techniques.

Pseudocapacitance multiporous vanadyl phosphate/graphene thin film electrode for high performance electrochemical capacitors

Supercapacitors are being considered as promising electricity storage devices with green sustainable energy conversion. To efficiently develop and optimize pseudocapacitive material of vanadyl phosphate, herein, multiporous vanadyl phosphate/graphene (denoted as MP-VOPO₄@rGO) is fabricated for the first time with phytic acid as a phosphorus source by extremely simple sol-gel and drop coating methods, and used as the free binder thin film electrode of supercapacitors. The smart combination of honeycomb-like architecture and graphene incorporation results in more active sites and low internal resistance, significantly improving energy storage performance. The effect of introducting polystyrene (denoted as PS) template and rGO on the performance of the nanocomposite is systematically analyzed by comparing the performance of the corresponding thin film electrodes. The MP-VOPO₄@rGO thin film electrode delivers superior pseudocapacitive performance of 672 F g^-1 at 1 A g^-1 as well as a remarkable rate capability of 552 F g^-1 at 5 A g^-1, and it presents a remarkable longterm cycling stability, with a capacitance retention of 83.5% after 5000 cycles. Very interestingly, the results of surface capacitance contribution dominance clearly demonstrates its rapid capacitive response. In addition, based on MP-VOPO₄@rGO thin film as positive and negative electrodes, the corresponding assembled symmetric supercapacitors exihibits outstanding energy density of 26.3 Wh kg^-1 at power density of 249.9 W kg^-1. This investigation can not only provide a versatile strategy to design other thin film electrode materials but also open up a new insight into the development of polyanion phosphate composites for next-generation high performance energy storage systems.

An efficient Ni-P amorphous alloy electrocatalyst with a hierarchical structure toward borohydride oxidation

Nickel has been widely researched in the electrooxidation of borohydride due to its low cost and abundant reserves, but its catalytic activity and stability need to be improved for practical application. In this work, a Ni and P deposited nickel foam (Ni-P@NF) catalyst electrode with a unique hierarchical structure is prepared by a simple one-step electrodeposition method. The structure, morphology, and catalytic performances of Ni-P@NF are investigated systematically. The results show that Ni-P@NF exhibits excellent catalytic activity, stability, and durability during borohydride electrooxidation. On the Ni-P@NF catalyst electrode, the current density for borohydride oxidation can reach 225 mA cm-2; the fuel utilization is up to 84% and 97% of the initial current is maintained even after 500 cycles of cyclic voltammetry (CV), while a traditional H-type direct sodium borohydride fuel cell (DBFC) assembled with a Ni-P@NF catalyst anode can deliver a maximum power density of 52.5 mW cm-2 and an open circuit potential of 1.87 V. These merits can be attributed to the unique hierarchical structure of the Ni-P catalyst and the introduction of phosphorus. The results also show that the Ni-P@NF catalyst has certain application potential in DBFCs.