Exciton-polariton light-emitting diode based on a single ZnO superlattice microwire heterojunction with performance enhanced by Rh nanostructures

One-dimensional (1D) wirelike superlattice micro/nanostructures have received considerable attention for potential applications due to their versatility and capability for modulating optical and electrical characteristics. In this study, 1D superlattice microwires (MWs), which are made of undoped ZnO and Ga-doped ZnO with periodic and alternating crystalline layers (ZnO/ZnO:Ga), were synthesized individually. Under optical excitation, a series of resonance peaks in the photoluminescence spectrum can be ascribed to polariton emission, which originates from the coupling interaction of the 1D photonic crystal and confined excitons along the wire direction. Using a p-type GaN layer as the hole transport layer, a kind of waveguide light source based on an individual ZnO/ZnO:Ga superlattice MW was proposed and constructed. By analysing the spatially resolved electroluminescence spectra, the observed multipeak was ascribed to exciton-polariton emission with a vacuum Rabi splitting of about 275 meV. Cladding with Rh nanostructures gives rise to appropriate ultraviolet plasmons, and the Rabi splitting energy of our device was enhanced up to 413 meV. The exciton-polariton properties were further examined using angle-resolved electroluminescence measurements. Therefore, individual superlattice MWs can act as optical microresonators to achieve photon-exciton coupling with a large Rabi splitting energy. The experimental results indicate that an individual ZnO/ZnO:Ga superlattice MW can be generally used in developing exciton-polariton luminescence/lasing light sources, particularly for constructing low-threshold/thresholdless lasers toward pragmatic applications.

Electron-hole plasma Fabry-Perot lasing in a Ga-incorporated ZnO microbelt via Ag nanoparticle deposition

In this work, individual ZnO via Ga-doped (ZnO:Ga) microbelts with excellent crystallinity and smooth facets can enable the realization of lateral microresonator Fabry-Perot (F-P) microlasers, and the F-P lasing action originates from excitonic state. Interestingly, introducing Ag nanoparticles (AgNPs) deposited on the microbelt can increase F-P lasing characteristics containing a lower threshold and enhanced lasing output. Especially for the large size AgNPs (the diameter d is approximately 200 nm), the lasing features also exhibit a significant redshift of each lasing peak and an observable broadening of the spectral line width with an increase of the excitation fluence. And the remarkable lasing characteristics are belonging to the electron-hole plasma (EHP) luminescence. The behavior and dynamics of the stimulated radiation in an AgNPs@ZnO:Ga microbelt are studied, suggesting the Mott-transition from the excitonic state to EHP state that is responsible for the F-P lasing. These features can be attributed to the working mechanism that the hot electrons created by the large size AgNPs through nonradiative decay can fill the conduction band of nearby ZnO:Ga, leading to a downward shift of the conduction band edge. This novel filling influence can facilitate bandgap renormalization and result in EHP emission. The results provide a comprehensive understanding of the transition between excitonic and EHP states in the stimulated emission process. More importantly, it also can provide new scheme to developing high efficiency and ultra-low threshold microlasing diodes.

Pt nanoparticles utilized as efficient ultraviolet plasmons for enhancing whispering gallery mode lasing of a ZnO microwire via Ga-incorporation

Introducing nanostructured metals with ultraviolet plasmonic characters has attracted much attention for fabricating high performance optoelectronic devices in the shorter wavelength spectrum. In this work, platinum nanoparticles (PtNPs) with controlled plasmonic responses in ultraviolet wavelengths were successfully synthesized. To demonstrate the promising availability, PtNPs with desired sizes were deposited on a hexagonal ZnO microwire via Ga-doping (PtNPs@ZnO:Ga MW). Under ultraviolet illumination, typical near-band-edge emission of ZnO:Ga MW was considerably enhanced; meanwhile, the photocurrent is much larger than that of the bare MW. Thereby, the enhanced phenomena of a ZnO:Ga MW is related to localized surface plasmon resonances of the decorated PtNPs. A single MW with a hexagonal cross-section can be a potential platform to construct a whispering gallery mode (WGM) cavity due to its total inner wall reflection. Given this, the influence of PtNPs via ultraviolet plasmons on lasing features of the ZnO:Ga MW was tested. The lasing characteristics are significantly enhanced, including lasing output enhancement, a clear reduction of the threshold and the improvement of the quality factor. To exploit the working principle, PtNPs serving as powerful ultraviolet plasmons can couple with ZnO:Ga excitons, accelerating radiative recombination. Since fabricating stable, typical nanostructured metals with ultraviolet plasmons remains a challenging issue, the results illustrated in the work may offer a low-cost and efficient scheme for achieving plasmon-enhanced wide-bandgap semiconductor based ultraviolet optoelectronic devices with excellent performances.

A single microwire near-infrared exciton-polariton light-emitting diode

Exciton-polaritons, which originate from the strong coupling between photon modes of microresonators and excitons in semiconductor micro-/nanostructures, have drawn much attention due to their significance for fabricating coherent light sources which possess considerably lower emission thresholds. In this study, an exciton-polariton light-emitting diode (LED), made from a Ga-doped ZnO microwire (ZnO:Ga MW) and a p-GaAs template serving as the hole supplier, is fabricated. The n-ZnO:Ga MW/p-GaAs heterojunction device can emit light with a near-infrared wavelength of 880 nm and a narrow line width of about 60 nm. Due to the high quality whispering gallery mode (WGM) microcavities which are naturally self-constructed by the hexagon-shaped MW, the electroluminescence (EL) spectrum resolves into a series of resonance peaks which can be assigned to exciton-polariton features, leading to the strong coupling of the exciton and the WGM photon in the as-fabricated LED. The strong exciton-photon coupling is clearly evidenced via angle-resolved EL measurements, with the Rabi splitting energy extracted as 160 meV. Furthermore, by adjusting the size of the WGM microcavity structure naturally formed by the hexagonal MWs, particularly by adjusting the diameter of the wires, the exciton-polariton coupling strength in the single MW based LEDs can be tuned, with the as-extracted Rabi splitting energy varying in the range of 92-294 meV. The realization of a single MW based LED, which shows exciton-polariton behavior from a built-in optical microresonator, can enable a promising route for the future fabrication of polariton emitters, where the device performance no longer suffers from obstacles including the need for additional optical resonators, large lattice mismatch, and template availability.

Plasmon-enhanced strong exciton-polariton coupling in single microwire-based heterojunction light-emitting diodes

Manipulating the strong light-matter coupling interaction in optical microresonators that are naturally formed by semiconductor micro- or nanostructures is crucial for fabricating high-performance exciton-polariton devices. Such devices can function as coherent light sources having considerably lower emission threshold. In this study, an exciton-polariton light-emitting diode (LED), made of a single ZnO microwire (MW) and a p-GaN substrate, serving as the hole injector, was fabricated, and its working characteristics, in the near-ultraviolet region, were demonstrated. To further improve the quality of the single ZnO MW-based optical microresonator, Ag nanowires (AgNWs) with ultraviolet plasmonic response were deposited on the MW. Apart from the improvement of the electrical and optical properties of the hexagonal ZnO MW, the optically pumped whispering-gallery-mode lasing characteristics were significantly enhanced. Furthermore, a single ZnO MW not covered, and covered by AgNWs, was used to construct a heterojunction LED. Compared with single bare ZnO MW-based LED, significant enhancement of the device performance was achieved, including a significant enhancement in the light output and a small emission band blueshift. Specifically, the exciton-polariton emission was observably enhanced, and the corresponding Rabi splitting energy (∼ 495 meV) was significantly higher than that of the bare ZnO MW-based LED (∼ 370 meV). That ultraviolet plasmons of AgNWs enhanced the exciton-polariton coupling strength was further confirmed via angle-resolved electroluminescence measurements of the single MW-based polaritonic devices, which clearly illustrated the presence of Rabi splitting and subband anti-crossing characteristics. The experimental results provide new avenues to achieve extremely high coupling strengths, which can accelerate the advancements in electrically driven high-efficiency polaritonic coherent emitters and nonlinear devices.

Continuous-wave operation of an electrically pumped single microribbon based Fabry-Perot microlaser

Fabry-Perot (FP) mode microlasers have been popularized and applied widely in on-chip coherent light sources because of the unique advantages of directional output emission. In this work, a heterojunction light-emitting diode (LED) made of a Ga-doped ZnO (ZnO:Ga) microribbon and p-GaAs template is fabricated. And its electroluminescence characteristics of strong coupling of exciton-photon and polariton lasing, in the blue-violet spectrum, were demonstrated under continuous-wave operation of an electrical injection. In the device structure, a single microribbon with a rectangular-shaped cross section can achieve the FP-mode lasing action by the optical oscillation between the two lateral sides of the microcrystals in the ultraviolet spectrum. As the reverse-current is below the threshold value, the device can have radiative polaritonic lighting directly from bilateral sides of the microribbon, yielding strong coupling between excitons and FP-mode microresonator. And the exciton-polariton coupling strengths characterized by a Rabi splitting energy were extracted to be 500 meV. Further, when the input current increased more than a certain value, strong laser illuminating developed as two sharp peaks at the lower energy shoulder of the spontaneous emission peak, and these oscillating modes can dominate the waveguide EL spectra. The experimental results can provide us with further unambiguous evidence that the lasing is originated from the polariton resonances for the microribbon with strong exciton-polariton coupling. Since single microribbon based optical FP-mode microresonators do not require additional feedback mirrors, their compact size and resulting low thresholds make them a powerful candidate to construct on-chip coherent light sources for future integrated nanophotonic and optoelectronic circuitry.