Ln Based Metal-organic Framework for Fluorescence "Turn Off-On" Sensing of Hg2

A highly luminescent Ln-MOF [La₃(NDC)₄(DMF)₃(H₂O)₄]_n, (NDC = 2, 6 naphthalen dicarboxylic acid) was designed and synthesized. The structure was characterized by x-ray single structure determination, TGA, IR spectra and PXRD and fluorescence spectroscopy. The structure shows high fluorescence intensity based on the presence of lanthanide metal and ligand. In the presence of I^-, the emission can be effectively quenched introducing turn off system. Furthermore, the synthesized Ln-MOF can recognize Hg (II) by showing fluorescence turn-on signal because of the high affinity between Hg (II) and I^-. Moreover, the high selectivity and sensitivity of the synthesized Ln-MOF makes it quit qualified for determination of the low concentration of mercury (2.00 nM).

Tuning the structure of cerium-based metal-organic frameworks for efficient removal of arsenic species: The role of organic ligands

The ability of organic ligands to change the structure of metal-organic frameworks (MOFs) in nature and influence their adsorption efficiency for arsenic species is enormous. The current work was designed to investigate the adsorption performance of cerium-based MOFs with tunable structures through the use of organic ligands (Ce-MOF-66 and Ce-MOF-808) towards arsenic species from water. The structural features of Ce-MOF-66 and Ce-MOF-808 with varying crystallinity, morphology, particle size, and surface area are considerably altered by organic ligands tuning, resulting in clearly distinct arsenate (As (V)) and arsenite (As (III)) adsorption capabilities. The experimental results showed that the Langmuir adsorption capacities of As (V) by Ce-MOF-66 and Ce-MOF-808 reached 355.67 and 217.80 mg/g, respectively, while for As (III) were 5.52 and 402.10 mg/g for Ce-MOF-66 and Ce-MOF-808, respectively. Except for the impact of PO₄^3- on As (V), co-existing ions had no significant influence on adsorption, illustrating the high selectivity. Furthermore, to understand the structure and adsorption mechanism, two adsorbents were characterized by powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, specific surface area, Fourier transform infrared and X-ray photoelectron spectroscopy, in which identified that unsaturated sites and ligand exchange were the main adsorption mechanisms of As (V) and As (III). Overall, this research presents a novel approach for developing high-performance Ce-derived MOFs adsorbents to capture arsenic species.

Interfacial Unit-Dependent Catalytic Activity for CO Oxidation over Cerium Oxysulfate Cluster Assemblies

Atomically precise cerium oxo clusters offer a platform to investigate structure-property relationships that are much more complex in the ill-defined bulk material cerium dioxide. We investigated the activity of the MCe70 torus family (M = Cd, Ce, Co, Cu, Fe, Ni, and Zn), a family of discrete oxysulfate-based Ce70 rings linked by monomeric cation units, for CO oxidation. CuCe70 emerged as the best performing MCe70 catalyst among those tested, prompting our exploration of the role of the interfacial unit on catalytic activity. Temperature-programmed reduction (TPR) studies of the catalysts indicated a lower temperature reduction in CuCe70 as compared to CeCe70. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) indicated that CuCe70 exhibited a faster formation of Ce3+ and contained CO bridging sites absent in CeCe70. Isothermal CO adsorption measurements demonstrated a greater uptake of CO by CuCe70 as compared to CeCe70. The calculated energies for the formation of a single oxygen defect in the structure significantly decreased with the presence of Cu at the linkage site as opposed to Ce. This study revealed that atomic-level changes in the interfacial unit can change the reducibility, CO binding/uptake, and oxygen vacancy defect formation energetics in the MCe70 family to thus tune their catalytic activity.

A Novel Cerium(IV)-Based Metal-Organic Framework for CO2 Chemical Fixation and Photocatalytic Overall Water Splitting

Cerium (IV)-based metal-organic frameworks (MOFs) are highly desirable due to their unique potential in fields such as redox catalysis and photocatalysis. However, due to the high reduction potential of Ce^IV species in solution, it is still a great challenge to synthesize Ce^IV -MOFs with novel structures, which are extremely dominated by the hexanuclear Ce-O cluster inorganic building units (IBUs). Herein, a Ce-O IBU chain containing Ce^IV -MOF, CSUST-3 (CSUST: Changsha University of Science and Technology), was successfully prepared using the kinetic stabilization study of UiO-66(Ce)-NDC (H₂ NDC=2,6-naphthalenedicarboxylic acid). Furthermore, owing to the superior redox activity, Lewis acidity and semiconductor-like behavior owing to Ce⁴⁺ , activated CSUST-3 was demonstrated to be an excellent catalyst for CO₂ chemical fixation. One-pot synthesis of styrene carbonate from styrene and CO₂ was achieved under mild conditions (1 atm CO₂ , 80 °C, and solvent free). Moreover, activated CSUST-3 was shown to be a remarkable co-catalyst-free photocatalyst for overall water splitting (OWS), rendering 59 μmol g^-1  h^-1 of H₂ and 22 μmol g^-1  h^-1 of O₂ under simulated sunlight irradiation (Na₂ S-Na₂ SO₃ as sacrificial agent).

Structural transformation of metal oxo species within UiO-66 type metal–organic frameworks

A rare example of phase transitions within Th-based MOFs is reported, relevant for nuclear energy and waste management. Further investigations into phase transitions in isostructural frameworks (Zr, Hf, Ce) provide a comparison of different hexanuclear clusters' stabilities.

Electron transitions in a Ce(III)-catecholate metal-organic framework

A rare three-dimensional catecholate-based Ce(III) metal-organic framework (MOF), denoted as NU-1701, has been synthesized and crystallographically characterized. Density functional theory calculations highlight various possible electronic transitions that may present in NU-1701. These transitions are competitive and indicate increased lanthanide character of Ce(III).

Proton-Conductive Cerium-Based Metal-Organic Frameworks

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (E_a) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10^-3 S/cm at 25 °C under 99% relative humidity and an E_a of 0.14 eV; this value is among the lowest-reported E_a of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Metalloenzyme-Inspired Ce-MOF Catalyst for Oxidative Halogenation Reactions

The structure of UiO-66(Ce) is formed by CeO_2-x defective nanoclusters connected by terephthalate ligands. The initial presence of accessible Ce³⁺ sites in the as-synthesized UiO-66(Ce) has been determined by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR)-CO analyses. Moreover, linear scan voltammetric measurements reveal a reversible Ce⁴⁺/Ce³⁺ interconversion within the UiO-66(Ce) material, while nanocrystalline ceria shows an irreversible voltammetric response. This suggests that terephthalic acid ligands facilitate charge transfer between subnanometric metallic nodes, explaining the higher oxidase-like activity of UiO-66(Ce) compared to nanoceria for the mild oxidation of organic dyes under aerobic conditions. Based on these results, we propose the use of Ce-based metal-organic frameworks (MOFs) as efficient catalysts for the halogenation of activated arenes, as 1,3,5-trimethoxybenzene (TMB), using oxygen as a green oxidant. Kinetic studies demonstrate that UiO-66(Ce) is at least three times more active than nanoceria under the same reaction conditions. In addition, the UiO-66(Ce) catalyst shows an excellent stability and can be reused after proper washing treatments. Finally, a general mechanism for the oxidative halogenation reaction is proposed when using Ce-MOF as a catalyst, which mimics the mechanistic pathway described for metalloenzymes. The superb control in the generation of subnanometric CeO_2-x defective clusters connected by adequate organic ligands in MOFs offers exciting opportunities in the design of Ce-based redox catalysts.

The chemistry and applications of hafnium and cerium(iv) metal-organic frameworks

The coordination connection of organic linkers to the metal clusters leads to the formation of metal-organic frameworks (MOFs), where the metal clusters and ligands are spatially entangled in a periodic manner. The immense availability of tuneable ligands of different length and functionalities gives rise to robust molecular porosity ranging from several angstroms to nanometres. Among the large family of MOFs, hafnium (Hf) based MOFs have been demonstrated to be highly promising for practical applications due to their unique and outstanding characteristics such as chemical, thermal, and mechanical stability, and acidic nature. Since the report of UiO-66(Hf) and DUT-51(Hf) in 2012, less than 200 Hf-MOFs (ca. 50 types of structures) have been reported. Besides, tetravalent cerium [Ce(iv)] has been proven to be capable of forming similar topological MOF structures to Zr and Hf since its first discovery in 2015. So far, ca. 40 Ce(iv) MOFs with 60% having UiO-66-type structure have been reported. This review will offer a holistic summary of the chemistry, uniqueness, synthesis, and applications of Hf/Ce(iv)-MOFs with a focus on presenting the development in the Hf/Ce(iv)-clusters, topologies, ligand structures, synthetic strategies, and practical applications of Hf/Ce(iv)-MOFs. In the end, we will present the research outlook for the development of Hf/Ce(iv)-MOFs in the future, including fundamental design of Hf/Ce(iv)-clusters, defect engineering, and various applications including membrane development, diversified types of catalytic reactions, irradiation absorption in nuclear waste treatment, water production and wastewater treatment, etc. We will also present the emerging computational approaches coupled with machine-learning algorithms that can be applied in screening Hf and Ce(iv) based MOF structures and identifying the best-performing MOFs for tailor-made applications in future practice.