Ferromagnetic-Antiferromagnetic Coupling in Gas-Phase Synthesized M(Fe, Co, and Ni)-Cr Nanoparticles for Next-Generation Magnetic Applications

Combining ferromagnetic-antiferromagnetic materials in nanoalloys (i.e., nanoparticles, NPs, containing more than one element) can create a diverse landscape of potential electronic structures. As a result, a number of their magnetic properties can be manipulated, such as the exchange bias between NP core and shell, the Curie temperature of nanoparticulated samples, or their magnetocaloric effect. In this work, such a family of materials (namely M-Cr NPs where M is Fe, Co, Ni, or some combination of them) is reviewed with respect to the tunability of their magnetic properties via optimized doping with Cr up to its solubility limit. To this end, gas-phase synthesis has proven a most effective method, allowing excellent control over the physical structure, composition, and chemical ordering of fabricated NPs by appropriately selecting various deposition parameters. Recent advances in this field (both experimental and computational) are distilled to provide a better understanding of the underlying physical laws and point toward new directions for cutting-edge technological applications. For each property, a relevant potential application is associated, such as memory cells and recording heads, induced hyperthermia treatment, and magnetic cooling, respectively, aspiring to help connect the output of fundamental and applied research with current real-world challenges.

Self-assembled monolayer-assisted label-free electrochemical genosensor for specific point-of-care determination of Haemophilus influenzae

For sensitive detection of the L-fuculokinase genome related to the Haemophilus influenzae (H. influenzae), this research work demonstrates the label-free electrochemical-based oligonucleotide genosensing assay relying on the performing hybridization process. To enhance the electrochemical responses, multiple electrochemical modifier-tagged agents were effectively utilized. For attaining this goal, NiCr-layered double hydroxide (NiCr LDH) has been synthesized and combined with biochar (BC) to create an efficient electrochemical signal amplifier that has been immobilized on the surface of the bare Au electrode. Low detection and quantification limits (LOD and LOQ) associated with the designed genosensing bio-platform to detect L-fuculokinase have been achieved to 6.14 fM and 11 fM, respectively. Moreover, the wide linear range of 0.1 to 1000 pM demonstrates the capability of the designed platform. Investigated were the 1-, 2-, and 3-base mismatched sequences, and the negative control samples clarified the high selectivity and better performance of the engineered assay. The values of 96.6-104% and 2.3-3.4% have been obtained for the recoveries and RSDs, respectively. Furthermore, the repeatability and reproducibility of the associated bio-assay have been studied. Consequently, the novel method is appropriate for rapidly and quantitatively detecting H. influenzae, and is considered a better candidate for advanced tests on biological samples such as urine samples.

Interfaces and Oxygen Vacancies-Enriched Catalysts Derived from Cu-Mn-Al Hydrotalcite towards High-Efficient Water-Gas Shift Reaction

The water-gas shift (WGS) reaction is an important process in the hydrogen industry, and its catalysts are of vital importance for this process. However, it is still a great challenge to develop catalysts with both high activity and high stability. Herein, a series of high-purity Cu-Mn-Al hydrotalcites with high Cu content have been prepared, and the WGS performance of the Cu-Mn-Al catalysts derived from these hydrotalcites have been studied. The results show that the Cu-Mn-Al catalysts have both outstanding catalytic activity and excellent stability. The optimized Cu-Mn-Al catalyst has displayed a superior reaction rate of 42.6 μmolCO-1⋅gcat-1⋅s-1, while the CO conversion was as high as 96.1% simultaneously. The outstanding catalytic activities of the Cu-Mn-Al catalysts could be ascribed to the enriched interfaces between Cu-containing particles and manganese oxide particles, and/or abundant oxygen vacancies. The excellent catalytic stability of the Cu-Mn-Al catalysts may be benefitting from the low valence state of the manganese of manganese oxides, because the low valence manganese oxides have good anti-sintering properties and can stabilize oxygen vacancies. This study provides an example for the construction of high-performance catalysts by using two-dimensional hydrotalcite materials as precursors.

Nanoarchitecture of graphene nanosheets decorated with NiCr layered double hydroxide for sonophotocatalytic degradation of refractory antibiotics

Highly efficient and durable catalysts for wastewater treatment are urgently required to tackle critical environmental issues. In this regard, NiCr LDH (NC), NiCr LDH-GO (NC-GO), and NiCr LDH-rGO (NC-rGO) nanocomposites were synthesized. The results of XRD, EDX, and FTIR analyses not only explored the crystallographic and chemical structures of catalysts but also confirmed the successful synthesis. Further morphological, physical, chemical, and optical characteristics of the catalysts were evaluated more by SEM, HRTEM, BET, DRS, and XPS techniques. The as-synthesized catalysts were used for the efficient mineralization of rifadin under 50 W LED visible light irradiation and the ultrasonic power of 150 W. Amongst, 0.75 g L^-1 of NC-rGO demonstrated high sonophotocatalytic efficiency (88%) in natural pH (pH = 8) of 15 mg L^-1 of rifadin. The introduced system is also powerful for the decontamination of pharmaceutical-containing wastewater as well as other refractory antibiotics. Moreover, the radical trapping experiments demonstrated that the main reactive species involved in the degradation of rifadin are ^•OH, h⁺, and O₂^•-. The possible intermediates were thoroughly investigated using GCMS analysis. Also, NC-rGO demonstrated superior antibacterial activity in comparison with NC, NC-GO samples.

Facet-dependent activity of shape-controlled TiO2 supported Au nanoparticles for the water–gas shift reaction

Temperature-dependent interfacial catalysis of Au/TiO2 catalysts for the water–gas shift (WGS) reaction.

Improved Water-Gas Shift Performance of Au/NiAl LDHs Nanostructured Catalysts via CeO2 Addition

Supported gold on co-precipitated nanosized NiAl layered double hydroxides (LDHs) was studied as an effective catalyst for medium-temperature water–gas shift (WGS) reaction, an industrial catalytic process traditionally applied for the reduction in the amount of CO in the synthesis gas and production of pure hydrogen. The motivation of the present study was to improve the performance of the Au/NiAl catalyst via modification by CeO₂. An innovative approach for the direct deposition of ceria (1, 3 or 5 wt.%) on NiAl-LDH, based on the precipitation of Ce³⁺ ions with 1M NaOH, was developed. The proposed method allows us to obtain the CeO₂ phase and to preserve the NiAl layered structure by avoiding the calcination treatment. The synthesis of Au-containing samples was performed through the deposition–precipitation method. The as-prepared and WGS-tested samples were characterized by X-ray powder diffraction, N₂-physisorption and X-ray photoelectron spectroscopy in order to clarify the effects of Au and CeO₂ loading on the structure, phase composition, textural and electronic properties and activity of the catalysts. The reduction behavior of the studied samples was evaluated by temperature-programmed reduction. The WGS performance of Au/NiAl catalysts was significantly affected by the addition of CeO₂. A favorable role of ceria was revealed by comparison of CO conversion degree at 220 °C reached by 3 wt.% CeO₂-modified and ceria-free Au/NiAl samples (98.8 and 83.4%, respectively). It can be stated that tuning the properties of Au/NiAl LDH via CeO₂ addition offers catalysts with possibilities for practical application owing to innovative synthesis and improved WGS performance.

Reconstruction and catalytic activity of hybrid Pd(100)/(111) monolayer on γ-Al2O3(100) in CH4, H2O, and O2 dissociation

The importance of the "heterogeneity" of a Pd monolayer induced by interaction with a semi-ionic support in catalysis was evaluated. The geometry of the Pd monolayer was optimized on the (100) plane of γ-Al2O3 at fixed unit cell parameters defined by the oxide. Simulation of the deposition of a whole Pd monolayer in the flat Pd(100) form cut from the bulk led to the formation of a slightly distorted Pd(111) monolayer. The subsequent chemisorption or dissociation of CH4 or H2O on the Pd(111) layer resulted in a new hybrid Pd(100)/(111) structure containing alternating elements of (100) and (111) planes (the parallel bands of squares and triangles), which are similar for both CH4 and H2O reactions, and two isolated Pd mono-vacancies, respectively. The hybrid Pd(100)/(111) layer without chemisorbed species was found to be more stable than the initial distorted Pd(111) layer. The catalytic capabilities of these monolayer structures were investigated for the dissociation of methane and the water-gas shift reaction (WGSR) due to the lower predicted activation barriers for CH4, H2O, and O2 dissociation on the hybrid Pd(100)/(111) layer compared to that on the pure (bulk) Pd(100) surface. Moreover, the exothermic heats of these reactions were calculated to be moderate instead of endothermic heats on the Pd(100) or Pd(111) surfaces. The heats of H2O and NH3 adsorption on various monolayers were tested, revealing their dependence on Pd atomic charges. The relevance of the model of the heterogeneous Pd monolayer for explaining the maximum reaction rate experimentally observed at different Pd coverages was discussed. The transferability of the geometry and the extent of charge inhomogeneity of the hybrid monolayer without vacancies were also tested on the same γ-Al2O3(100) support for Pt, Rh, and Ag.