Towards standard electrolytes for sodium-ion batteries: physical properties, ion solvation and ion-pairing in alkyl carbonate solvents

A Sodium Bis(fluorosulfonyl)imide (NaFSI)-based Multifunctional Electrolyte Stabilizes the Performance of NaNi1/3Fe1/3Mn1/3O2/hard Carbon Sodium-ion Batteries

A sodium bis(fluorosulfonyl)imide (NaFSI)-based multifunctional electrolyte is developed by partially replacing NaPF6 salt in the electrolyte to improve the wide temperature range working capability of NaNi1/3Fe1/3Mn1/3O2/hard carbon (NNFM111/HC) sodium-ion batteries (SIBs). The capacity retention of the SIBs with NaFSI-NaPF6 dual salt electrolyte increases from 47.2 % to 75.5 % after 250 cycles at 25 °C, and from 51.0 % to 82.3 % after 80 cycles at 45 °C, and the 1 C discharge capacity retention at the low temperature of -20 °C also increases 26.8 %. In the single salt system, NaPF6 effectively passivate the aluminum foil and NaFSI passivate the electrode/electrolyte interface. The synergistic effect of NaPF6 and NaFSI greatly improves the battery performance in a wide temperature range. This NaFSI-based dual salt electrolyte also effectively overcomes the flaws when the SIBs using NaFSI or NaPF6 independently, and makes it more suitable for SIBs, indicating promising prospects in the commercial application of NNFM111/HC SIBs.

Binary Solvent Induced Stable Interphase Layer for Ultra-Long Life Sodium Metal Batteries

Sodium foil, promising for high-energy-density batteries, faces reversibility challenges due to its inherent reactivity and unstable solid electrolyte interphase (SEI) layer. In this study, a stable sodium metal battery (SMB) is achieved by tuning the electrolyte solvation structure through the addition of co-solvent 2-methyl tetrahydrofuran (MTHF) to diglyme (Dig). The introduction of cyclic ether-based MTHF results in increased anion incorporation in the solvation structure, even at lower salt concentrations. Specifically, the anion stabilization capabilities of the environmentally sustainable MTHF co-solvent lead to a contact-ion pair-based solvation structure. Time-of-flight mass spectroscopy analysis reveals that a shift toward an anion-dominated solvation structure promotes the formation of a thin and uniform SEI layer. Consequently, employing a NaPF6-based electrolyte with a Dig:MTHF ratio of 50% (v/v) binary solvent yields an average Coulombic efficiency of 99.72% for 300 cycles in Cu||Na cell cycling. Remarkably, at a C/2 cycling rate, Na||Na symmetric cell cycling demonstrates ultra-long-term stability exceeding 7000 h, and full cells with Na0.44MnO2 as a cathode retain 80% of their capacity after 500 cycles. This study systematically examines solvation structure, SEI layer composition, and electrochemical cycling, emphasizing the significance of MTHF-based binary solvent mixtures for high-performance SMBs.

Glyoxylic-Acetal-Based Electrolytes for Sodium-Ion Batteries and Sodium-Ion Capacitors

A comprehensive study on the properties and implementation of glyoxylic-acetals in sodium-ion energy storage systems is presented. Electrolytes containing 1,1,2,2-tetramethoxyethane (tetramethoxyglyoxal, TMG), 1,1,2,2-tetraethoxyethane (tetraethoxyglyoxal, TEG) and a mixture of the latter with propylene carbonate (PC) exhibit increased thermal stabilities and higher flash points compared to classical electrolytes based on carbonates as solvents. Due to its favorable properties, 1 m NaTFSI in TEG/PC (3 : 7), has been selected and used for sodium-ion energy storage systems based on a Prussian Blue (PB) positive electrode and a hard carbon (HC) negative electrode. Compared to conventional electrolyte (based on a 1 : 1 mixture of ethylene carbonate, EC, and dimethyl carbonate, DMC), this glyoxylic-acetal electrolyte provides competitive capacity and prolonged cycle life. Postmortem XPS analysis indicates that the electrode-electrolyte interphases formed in presence of TEG are thicker and presumably more protective, inhibiting typical degradation processes of the electrodes. Furthermore, it is demonstrated that the suitable properties of TEG on the cycling stability can also be exploited for the construction of highly stable sodium-ion capacitors.

Electrolyte Solvation Structure Design for Sodium Ion Batteries

Sodium ion batteries (SIBs) are considered the most promising battery technology in the post-lithium era due to the abundant sodium reserves. In the past two decades, exploring new electrolytes for SIBs has generally relied on the "solid electrolyte interphase (SEI)" theory to optimize the electrolyte components. However, many observed phenomena cannot be fully explained by the SEI theory. Therefore, electrolyte solvation structure and electrode-electrolyte interface behavior have recently received tremendous research interest to explain the improved performance. Considering there is currently no review paper focusing on the solvation structure of electrolytes in SIBs, a systematic survey on SIBs is provided, in which the specific solvation structure design guidelines and their consequent impact on the electrochemical performance are elucidated. The key driving force of solvation structure formation, and the recent advances in adjusting SIB solvation structures are discussed in detail. It is believed that this review can provide new insights into the electrolyte optimization strategies of high-performance SIBs and even other emerging battery systems.

New Diglyme-based Gel Polymer Electrolytes for Na-based Energy Storage Devices

This work presents for the first time a new diglyme-based gel polymer (DOBn-GPE) suitable for Na-based energy storage devices. The DOBn-GPE, which contains a methacrylate-based polymer, exhibited an excellent high ionic conductivity (2.3 mS cm-1 at 20 °C), broad electrochemical stability (>5.0 V), and high mechanical stability. DOBn-GPE could be successfully used for the realization of Na-ion capacitors, sodium-metal batteries, and sodium-ion batteries, displaying performance comparable with those of systems containing liquid electrolytes at room temperature and at 60 °C. The results of these investigation indicated that the development of diglyme-based gel polymer electrolytes represents a promising strategy for the realization of advanced Na-based energy storage devices.

NaFSI and NaTFSI Solutions in Ether Solvents from Monoglyme to Poly(ethylene oxide)-A Molecular Dynamics Study

Classical molecular dynamics simulations have been performed for a series of electrolytes based on sodium bis(fluorosulfonyl)imide or sodium bis(trifluoromethylsulfonyl)imide salts and monoglyme, tetraglyme, and poly(ethylene oxide) as solvents. Structural properties have been assessed through the analysis of coordination numbers and binding patterns. Residence times for Na-O interactions have been used to investigate the stability of solvation shells. Diffusion coefficients of ions and electrical conductivity of the electrolytes have been estimated from molecular dynamics trajectories. Contributions to the total conductivity have been analyzed in order to investigate the role of ion-ion correlations. It has been found that the anion-cation interactions are more probable in the systems with NaTFSI salts. Accordingly, the degree of correlations between ion motions is larger in NaTFSI-based electrolytes.