Ni/Co/Co3O4@C nanorods derived from a MOF@MOF hybrid for efficient overall water splitting

The design of nanostructured materials for efficient bifunctional electrocatalysts has gained tremendous attention, yet developing a fast and effective synthesis strategy remains a challenge. Here, we present a fast and scalable synthetic method of Ni/Co/Co₃O₄@C nanorods for efficient overall water splitting. Using microwave synthesis, we first produced a unique Ni-MOF@Co-MOF in a few minutes. Subsequently, we transformed the MOF@MOF into hybrid Ni/Co/Co₃O₄ nanoparticles covered with graphitic carbon in a few seconds using laser-scribing. The prepared bimetallic catalysts showed remarkably low overpotentials of 246 mV for the oxygen evolution reaction (OER) and 143 mV for the hydrogen evolution reaction (HER) at a current density of 30 mA cm^-2. An electrolyzer assembled with the bimetallic catalysts delivered a high current density of 20 mA cm^-2 at a voltage of 1.6 V and exhibited good durability (nearly 91.6% retention even after a long-running operation of 24 h at a voltage of 1.52 V). Our proposed method could serve as a powerful method for creating various multimetallic hybrid nanocatalysts with unique hierarchical structures from diverse MOFs.

Interface engineering triggered by carbon nanotube-supported multiple sulfides for boosting oxygen evolution

Finding an efficient, stable and cheap oxygen evolution reaction (OER) catalyst is very important for renewable energy conversion systems. There are relatively few related research reports due to the thermodynamic instability of transition metal sulfides (TMSs) at the oxidation potential and these are usually focused on single metal sulfides or bimetal sulfides. Metal sulfide mixture systems are rarely studied. The fabrication of a TMS/TMS interface is a feasible method to improve the kinetics of the OER. Here, we constructed TMS hybrid electrocatalysts with multiple phase interfaces for the oxygen evolution reaction, named S-CoFe/CNTs. The results show that the S-CoFe/CNT catalyst exhibits a low overpotential of 258 mV to achieve a current density of 10 mA cm^-2, and has high activity in the OER process. Meanwhile, the catalyst also shows a low Tafel slope (69 mV dec^-1) and good stability. This can be attributed to the synergistic catalysis of the multiphase interface in the catalyst and the rapid electron transfer pathway brought by CNTs. The new strategy for the synthesis of catalysts containing the TMS/TMS interface provides a new idea and method for the development of efficient and practical water splitting catalysts.

Extended Graphite Supported Flower-like MnO2 as Bifunctional Materials for Supercapacitors and Glucose Sensing

A simple, efficient, and cost-effective extended graphite as a supporting platform further supported the MnO₂ growth for the construction of hierarchical flower-like MnO₂/extended graphite. MnO₂/extended graphite exhibited an increase in sp² carbon bonds in comparison with that of extended graphite. It can be expected to display better electrical conductivity and further promote electron/ion transport kinetics for boosting the electrochemical performance in supercapacitors and glucose sensing. In supercapacitors, MnO₂/extended graphite delivered an areal capacitance value of 20.4 mF cm⁻² at 0.25 mA cm⁻² current densities and great cycling stability (capacitance retention of 83% after 1000 cycles). In glucose sensing, MnO₂/extended graphite exhibited a good linear relationship in glucose concentration up to about 5 mM, sensitivity of 43 μA mM⁻¹cm⁻², and the limit of detection of 0.081 mM. It is further concluded that MnO₂/extended graphite could be a good candidate for the future design of synergistic multifunctional materials in electrochemical techniques.

Effect of Oxygen-Containing Group on the Catalytic Performance of Zn/C Catalyst for Acetylene Acetoxylation

In this study, a series of activated carbon-based supports with different oxygen-containing groups (OCGs) proportions were obtained via thermal treatment in an ozone flow. Semiquantitative analyses indicated that the performance of the catalyst attained a maximum after 30 min of treatment with ozone flow, and had a positive correlation with the content ratios of carboxyl and hydroxyl groups. Further, temperature-programmed desorption analysis demonstrated that the high performance (63% acetic acid conversion) of the prepared catalyst for the acetoxylation of acetylene could be ascribed to the reduced strength of increased capacity of acetylene adsorption. Density functional theory proved that the additional –COOH in the dicarboxylic catalytic system could be employed as a support for the active sites, and enhancing C₂H₂ adsorption strength in the rate-limiting step in the actual experimental process effectively accelerated the reaction rate. Thus, the OCGs on the surface of activated carbon play a crucial role in the catalytic performance of the acetylene acetoxylation catalyst.

Controlled growth of porous oxygen-deficient NiCo2O4 nanobelts as high-efficiency electrocatalysts for oxygen evolution reaction

NiCo₂O₄ with a controlled oxygen vacancy concentration introduced by an Ar-annealing process greatly improved OER activity.

Surface Atom Regulation on Polyoxometalate Electrocatalyst for Simultaneous Low-Voltage H2 Production and Phenol Degradation

The electrocatalytic hydrogen evolution reaction is an ideal method for H₂ production. To improve the performance of polyoxometalate-based electrocatalyst in the hydrogen evolution reaction, one O^2- in polyoxometalate is replaced by S^2-. This weakens the binding of polyoxometalate to H*, facilitates its desorption, and improves the H₂ generation property. Vulcanized polyoxometalate only requires 55 mV to achieve 10 mA·cm^-2 current in the hydrogen evolution reaction. This electrocatalyst also exhibits promising performance in phenol degradation reaction, which is an ideal substitute for high-energy-consuming oxygen evolution reaction in H₂ production due to low voltage to drive. To acquire 100 and 200 mA·cm^-2 in the phenol degradation reaction, this vulcanized polyoxometalate only consumes 1.38 and 1.41 V. With this electrocatalyst working as a cathode and an anode simultaneously, an electrolyzer is constructed by employing phenol-containing KOH as an electrolyte. To obtain 100 and 200 mA·cm^-2 current, the electrolyzer only requires 1.54 and 1.57 V. Because energy-efficient phenol degradation reaction occurs, these values are obviously lower than the oxygen evolution reaction involved in the overall water-splitting H₂ production. This work provides a universal method to enhance the hydrogen evolution reaction (HER) activity of polyoxometalates. Furthermore, a new method is explored, which achieves energy conservation and phenol degradation simultaneously in H₂ production.

Optimization of the overall water-splitting performance of N, S co-doped carbon-supported NiCoMnSx−10 at high current densities by the introduction of sulfur defects and oxygen vacancies

This work reports the synthesis of N and S co-doped carbon-supported NiCoMnS_x−10 electrocatalyst and its application in electrocatalytic overall water splitting.