Recent Advances of Transition Metal Basic Salts for Electrocatalytic Oxygen Evolution Reaction and Overall Water Electrolysis

Electrocatalytic oxygen evolution reaction (OER) has been recognized as the bottleneck of overall water splitting, which is a promising approach for sustainable production of H2. Transition metal (TM) hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER, while TM basic salts [M2+(OH)2-x(Am-)x/m, A = CO32-, NO3-, F-, Cl-] consisting of OH- and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade. In this review, we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting. We categorize TM basic salt-based OER pre-catalysts into four types (CO32-, NO3-, F-, Cl-) according to the anion, which is a key factor for their outstanding performance towards OER. We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance. To develop bifunctional TM basic salts as catalyst for the practical electrolysis application, we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance. Finally, we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.

Recent Advances in Transition Metal Tellurides (TMTs) and Phosphides (TMPs) for Hydrogen Evolution Electrocatalysis

The hydrogen evolution reaction (HER) is a developing and promising technology to deliver clean energy using renewable sources. Presently, electrocatalytic water (H₂O) splitting is one of the low-cost, affordable, and reliable industrial-scale effective hydrogen (H₂) production methods. Nevertheless, the most active platinum (Pt) metal-based catalysts for the HER are subject to high cost and substandard stability. Therefore, a highly efficient, low-cost, and stable HER electrocatalyst is urgently desired to substitute Pt-based catalysts. Due to their low cost, outstanding stability, low overpotential, strong electronic interactions, excellent conductivity, more active sites, and abundance, transition metal tellurides (TMTs) and transition metal phosphides (TMPs) have emerged as promising electrocatalysts. This brief review focuses on the progress made over the past decade in the use of TMTs and TMPs for efficient green hydrogen production. Combining experimental and theoretical results, a detailed summary of their development is described. This review article aspires to provide the state-of-the-art guidelines and strategies for the design and development of new highly performing electrocatalysts for the upcoming energy conversion and storage electrochemical technologies.

Ruthenium-Doping-Induced Amorphization of VS4 Nanostructures with a Rich Sulfur Vacancy for Enhanced Hydrogen Evolution Reaction in a Neutral Electrolyte Medium

The generation of pure H₂ from a neutral electrolyte solution represents a transformative route with low cost and environmentally friendly nature. However, the complex kinetics of hydrogen evolution reaction (HER) via water electrolysis make its practical application to be difficult. Herein, we have reported Ru-doping-induced formation of VS₄ nanostructures with a rich S vacancy for neutral HER in a 0.2 M phosphate buffer solution. The Ru-doped VS₄ demands an overpotential value of 160 mV at 10 mA/cm² current density with a lower catalyst loading of 0.1 mg/cm², while pristine VS₄ demands a 374 mV overpotential with the same mass loading. 60 hours of chronoamperometric study reveals the excellent stability of Ru-doped VS₄ materials, which is the highest amount of time ever reported for neutral HER. The marginal degradation of a catalyst under a long-term stability study was confirmed through inductively coupled plasma mass spectrometry (ICP-MS) analysis. The introduction of Ru to the VS₄ lattice leads to a 4.35-fold increase in the turnover-frequency values compared to those of bare VS₄ nanostructures. The higher HER activity of S-vacancy-enriched VS₄ materials is thought to originate through effective water adsorption in S vacancy and Ru³⁺ sites followed by the dissociation of a H₂O molecule, and S₂^2- efficiently converts H_ad to H₂. Also, post-HER characterization reveals that the transformation of some Ru³⁺ to Ru⁰ additionally favored the HER by providing a better H adsorption site under a static cathodic potential.

Enhancement of the OER Kinetics of the Less-Explored α-MnO2 via Nickel Doping Approaches in Alkaline Medium

Development of a low-cost transition metal-based catalyst for water splitting is of prime importance for generating green hydrogen on an industrial scale. Recently, various transition metal-based oxides, hydroxides, sulfides, and other chalcogenide-based materials have been synthesized for developing a suitable anode material for the oxygen evolution reaction (OER). Among the various transition metal-based catalysts, their oxides have received much consideration for OER, especially in lower pH condition, and MnO₂ is one of the oxides that have widely been used for the same. The large variation in the structural disorder of MnO₂ and internal resistance at the electrode-electrolyte interfaces have limited its large-scale application. By considering the above limitations of MnO₂, here in this work, we have designed Ni-doped MnO₂ via a simple wet-chemical synthetic route, which has been successfully applied for OER application in 0.1 M KOH solution. Doping of various quantities of Ni into the MnO₂ lattices improved the OER properties, and for achieving 10 mA/cm² current density, the Ni-doped MnO₂ containing 0.02 M of Ni²⁺ ions (coined as MnO₂-Ni_0.002(M)) demands only 445 mV overpotential, whereas the bare MnO₂ required 610 mV overpotential. It has been proposed that the incorporation of nickel ions into the MnO₂ lattices leads to an electron transfer from the Ni³⁺ ions to Mn⁴⁺, which in turn facilitates the Jahn-Teller distortion in the Mn-O octahedral unit. This electron transfer and the creation of a structural disorder in the Mn sites result in the improvization of the OER properties of the MnO₂ materials.

Advancing the extended roles of 3D transition metal based heterostructures with copious active sites for electrocatalytic water splitting

The replacement of noble metals with alternative electrocatalysts is highly demanded for water splitting. From the exploration of 3D -transition metal based heterostructures, engineering at the nano-level brought more enhancements in active sites with reduced overpotentials for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). However, recent developments in 3D transition metal based heterostructures like direct growth on external substrates (Ni foam, Cu foam) gave highly impressive activities and stabilities. Research needs to be focused on how the active sites can be enhanced further with 3D heterostructures of transition metals by studying them with various counterparts like hydroxides, layered double hydroxides and phosphides for empowering both OER and HER applications. This perspective covers the way to enlarge the utilization of 3D heterostructures successfully in terms of reduced overpotentials, highly exposed active sites, increased electrical conductivity, porosity and high-rate activity. From the various approaches of growth of transition metal based 3D heterostructures, it is easy to fine tune the active sites to have a viable production of hydrogen with less applied energy input. Overall, this perspective outlines a direction to increase the number of active sites on 3D transition metal based heterostructures by growing on 3D foams for enhanced water splitting applications.

Emerging carbon shell-encapsulated metal nanocatalysts for fuel cells and water electrolysis

The development of low-cost, high-efficiency electrocatalysts is of primary importance for hydrogen energy technology. Noble metal-based catalysts have been extensively studied for decades; however, activity and durability issues still remain a challenge. In recent years, carbon shell-encapsulated metal (M@C) catalysts have drawn great attention as novel materials for water electrolysis and fuel cell applications. These electrochemical reactions are governed mainly by interfacial charge transfer between the core metal and the outer carbon shell, which alters the electronic structure of the catalyst surface. Furthermore, the rationally designed and fine-tuned carbon shell plays a very interesting role as a protective layer or molecular sieve layer to improve the performance and durability of energy conversion systems. Herein, we review recent advances in the use of M@C type nanocatalysts for extensive applications in fuel cells and water electrolysis with a focus on the structural design and electronic structure modulation of carbon shell-encapsulated metal/alloys. Finally, we highlight the current challenges and future perspectives of these catalytic materials and related technologies in this field.

Enabling and Inducing Oxygen Vacancies in Cobalt Iron Layer Double Hydroxide via Selenization as Precatalysts for Electrocatalytic Hydrogen and Oxygen Evolution Reactions

Production of hydrogen by water electrolysis is an environment-friendly method and comparatively greener than other methods of hydrogen production such as stream reforming carbon, hydrolysis of metal hydride, etc. However, sluggish kinetics of the individual half-cell reactions hinders the large-scale production of hydrogen. To minimize this disadvantage, finding an appropriate, competent, and low-cost catalyst has attracted attention worldwide. Layer double hydroxide (LDH)-based materials are promising candidates for oxygen evolution reaction (OER) but not fruitful and their hydrogen evolution reaction (HER) activity is very poor, due to the lack of ionic conductivity. The inclusion of chalcogenide and generation of inherent oxygen vacancies in the lattice of LDH lead to improvement of both OER and HER activities. The presence of rich oxygen vacancies was confirmed using both the Tauc plot (1.11 eV, vacancy induction) and the photoluminescence study (peak at 426 nm, photoregeneration of oxygen). In this work, we have developed vacancy-enriched, selenized CoFe-LDH by the consequent wet-chemical and hydrothermal routes, respectively, which was used for OER and HER applications in 1 M KOH and 0.5 M H₂SO₄ electrolytes, respectively. For OER, the catalyst required only 251 mV overpotential to reach a 50 mA/cm² current density with a Tafel slope value of 47 mV/dec. For HER, the catalyst demanded only 222 mV overpotential for reaching a 50 mA/cm² current density with a Tafel slope value of 126 mV/dec. Hence, generating oxygen vacancies leads to several advantages from enhancing the exposed active sites to high probability in obtaining electrocatalytically active species and subsequent assistance in oxygen and hydrogen molecule cleavage.