Experimental and theoretical investigation of the tuning of electronic structure in SnO2via Co doping for enhanced styrene epoxidation catalysis

Co doping is an effective strategy for the tuning of electronic structure in SnO2, which leads to a huge boost in the styrene epoxidation reaction performance.

Synthesis of SDS-Modified Pt/Ti3C2Tx Nanocomposite Catalysts and Electrochemical Performance for Ethanol Oxidation

It is well-known that platinum (Pt) is still the preferred material of anode catalyst in ethanol oxidation, however, the prohibitive high cost and CO poisoning of Pt metal impede the commercialization of fuel cells. Therefore, improving the utilization rate of catalysts and reduce the cost of catalyst become one of the most concerned focus in the construction of fuel cells. In this work, the Pt-based catalysts are synthesized by using different content of sodium dodecyl sulfate (SDS) modified-Ti₃C₂T_x support, and the dispersion regulation function of SDS modified-Ti₃C₂T_x supported on Pt nanoparticles is investigated. The structure, composition and morphology of different catalysts are characterized by X-ray diffraction (XRD), X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM, respectively. It is found that the Pt nanoparticles in pure Ti₃C₂T_x surface are serious aggregated and show poor dispersion, whereas the Pt nanoparticles in SDS modified-Ti₃C₂T_x have a better dispersion. The electrochemical results revealed that SDS modified-Ti₃C₂T_x supported Pt nanoparticles has higher electrocatalytic activity and stability in both acidic and alkaline ethanol oxidation when the dosage of SDS increases to 100 mg. These findings indicate that the SDS-Ti₃C₂T_x/Pt catalysts show a promising future of potential applications in fuel cells with modification of Ti₃C₂T_x support.

Electrospinning Highly Dispersed Ru Nanoparticle-Embedded Carbon Nanofibers Boost CO2 Reduction in a H2/CO2 Fuel Cell

A H₂/CO₂ fuel cell is a promising device that can convert CO₂ into hydrocarbon fuel with electricity generation. Herein, a facile electrospinning method has been used to synthesize the embedded Ru-CNF catalyst in which Ru nanoparticles are dispersed homogeneously within N-doped carbon nanofibers. This catalyst exhibits a high CH₄ production rate of 308.46 μmol g_cat^-1 h^-1 at 170 °C, which is superior to that of the Ru/CNF (242.53 μmol g_cat^-1 h^-1) and Ru/CNT (194.24 μmol g_cat^-1 h^-1). The enhanced CO₂RR performance of Ru-CNF is ascribed to the well-distributed Ru nanoparticles within the CNF matrix and synergistic effect of Ru sites with N species, which results in forming the increased CO₂RR active sites, hence improving the catalytic activity. Simultaneously, it can achieve a peak power density of 1.8 W m^-2 on the strength of anodic (H₂ oxidation) and cathodic (CO₂ reduction and H₂ evolution) reactions with remarkable stability. Such findings give a theoretical basis of CO₂RR in the H₂/CO₂ fuel cell system, which could hold great value to further develop the high-efficiency catalysts for CO₂ reduction.

Review of semi-dry electrodes for EEG recording

Developing reliable and user-friendly electroencephalography (EEG) electrodes remains a challenge for emerging real-world EEG applications. Classic wet electrodes are the gold standard for recording EEG; however, they are difficult to implement and make users uncomfortable, thus severely restricting their widespread application in real-life scenarios. An alternative is dry electrodes, which do not require conductive gels or skin preparation. Despite their quick setup and improved user-friendliness, dry electrodes still have some inherent problems (invasive, relatively poor signal quality, or sensitivity to motion artifacts), which limit their practical utilization. In recent years, semi-dry electrodes, which require only a small amount of electrolyte fluid, have been successfully developed, combining the advantages of both wet and dry electrodes while addressing their respective drawbacks. Semi-dry electrodes can collect reliable EEG signals comparable to wet electrodes. Moreover, their setup is as fast and convenient similar to that of dry electrodes. Hence, semi-dry electrodes have shown tremendous application prospects for real-world EEG acquisition. Herein, we systematically summarize the development, evaluation methods, and practical design considerations of semi-dry electrodes. Some feasible suggestions and new ideas for the development of semi-dry electrodes have been presented. This review provides valuable technical support for the development of semi-dry electrodes toward emerging practical applications.