Enhanced photoreduction efficiency of Cr(VI) driven by visible light in a new Zr-based metal-organic framework modified by hydroxyl groups

While metal-organic framework (MOF) photocatalysts have demonstrated a unique Cr(VI) photoreduction capability in recent decades, their performance is still insufficient for practical applications because of their low Cr(VI) uptake and poor visible light response. To cope with these drawbacks, a new OH-modified Zr-based MOF, termed HCMUE-1, was successfully prepared via a solvothermal method in this work. The complete characterization of HCMUE-1 was performed through various techniques, including powder X-ray diffraction (PXRD), Raman spectroscopy, Fourier transform infrared (FT-IR), thermogravimetric analysis and differential scanning calorimetry (TGA-DSC), scanning electron microscopy combined with energy-dispersive X-ray (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). The obtained data exhibited the excellent Cr(VI) photoreduction efficiency of HCMUE-1, reaching up to 98% after 90 min and almost 100% after 120 min under visible light illumination in a low acidic medium. Noteworthily, HCMUE-1 retained the same Cr(VI) removal rate for at least seven cycles without considerable loss. Further experimental investigations demonstrated that the structural stability and surface morphology of HCMUE-1 were retained after photoreduction. Moreover, the photocatalytic reduction mechanism of Cr(VI) to Cr(III) was interpreted through a series of systematic experimental measurements. These results indicate that HCMUE-1 possesses potential as an efficient photocatalyst for reducing toxic Cr(VI) species from wastewater in real-life conditions.

Fabrication of Cu-MOF-Derived Cu/CuxO/C Bifunctional Materials for Light and Dark Catalytic Properties

Metal-organic frameworks (MOFs) are self-assembled constitutive precursors and efficient self-sacrificial templates with metal ions/clusters and organic linkers from which multifunctional materials with carbon nanostructures can be derived. In this study, we synthesized a novel Cu-MOF with Cu(II) as the central metal ion through two ligands, N,N'-bis(pyridin-3-yl)terephthalamide (3-bpta) and fumaric acid (H2FA), which was used as a template for derivatizing carbon-based nanostructured materials of Cu and CuxO through doping with different materials (melamine, urea, and TiO2) in a simple and efficient one-step pyrolysis. The Cu/CuxO-1 catalyst possesses both dark-catalyzed degradation activity and photocatalytic reduction activity during water purification due to the hole-transfer ability between Cu+ and Cu2+ and its inhibition of electron-hole complexation. In the absence of light, force, and cocatalyst, it can also effectively remove azo dyes in water and effectively reduce Cr(VI) under the action of visible light; therefore, Cu/CuxO-1 can be used as a new type of bifunctional material for the removal of pollutants in water, which has a broad prospect.

Construction of ZnIn2S4/MOF-525 heterojunction system to enhance photocatalytic degradation of tetracycline

Zirconium-based porphyrin metal organic frameworks (Zr-PMOFs) had attracted attention in the field of photocatalysis in recent years. However, the recombination of photogenerated carriers of monomer PMOF limits its performance of photocatalytic organic pollutants degradation. Metal sulfide has a suitable visible band gap, which can form a heterojunction with MOF materials to enhance the photocatalytic efficiency of MOF. Therefore, a typical metal sulfide semiconductor ZnIn₂S₄ (ZIS) was introduced into a Zr-MOF (MOF-525) by solvothermal method to prepare a series of ZIS/MOF-525 (ZIS/MOF-525-1, ZIS/MOF-525-2, ZIS/MOF-525-3 and ZIS/MOF-525-4) composite photocatalysts in this work. The results of characterization analysis, optical analysis and electrochemical analysis showed that the interface of ZIS/MOF-525 formed a typical type-II heterojunction, which accelerated the electron transport rate and effectively inhibited the recombination of photogenerated e^- and h⁺ in MOF-525. The optimal removal efficiency of tetracycline (TC) by ZIS/MOF-525-3 (the mass of MOF-525 is 30 mg) reached 93.8% under 60 min visible light illumination, which was greater than that of pure MOF-525 (37.2%) and ZnIn₂S₄ (70.0%), and it still maintained good stability after five cycles reusing experiment. This work provides feasible insight for the preparation of novel and efficient PMOF-based photocatalysts in the future.

Highly exfoliated graphitic carbon nitride for efficient removal of wastewater pollutants: Insights from DFT and statistical modelling

The present work entails the synthesis of thermally modified graphitic carbon nitride (GCN) using a two-step thermal treatment procedure and its subsequent use in the photocatalytic reduction of toxic pollutants such as rhodamine B dye (RhB) and chromium (VI) (Cr(VI)) from aquatic environments. The as-synthesised exfoliated GCN (GCNX) is characterised by X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller analysis (BET), diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). These characterisations helped to elucidate the phase formation, chemical structure, composition, surface area, optical properties, and morphology of the sample. With assistance from a visible light source, GCNX can degrade RhB dye within 30 min in the presence of hydrogen peroxide (H₂O₂) and reduce Cr(VI) to Cr(III) in under 2 h in the presence of formic acid (FA/HCOOH). Variations in different catalytic parameters, including catalyst amount, pH of the solution, initial RhB or Cr(VI) concentration, and variation in H₂O₂ or FA concentration, are performed to inspect their effects on the photodegradation activity of GCNX. Moreover, the GCNX catalyst exhibits impressive stability and reusability. A thorough statistical evaluation follows the response surface methodology to understand the complex interaction between the factors contributing to the catalytic activity. The band alignment of differently functionalised GCN blocks in their pristine form and their H₂O₂/FA-adsorbed states is investigated using first-principles calculations to provide a further understanding of the RhB and Cr(VI) reduction mechanisms. The modified GCN can thus be effectively employed as a low-cost material for removing contamination from aquatic environments.

Keggin Cluster Modulated Photocatalytic Activity of Aryl Sulfonium Polyoxometalate Hybrids toward Dichromate Reduction

Dichromate (Cr₂O₇^2-) ion having chromium in its +6 oxidation state is a carcinogen and a potential threat to humans and aquatic life. The photocatalytic reduction of toxic Cr(VI) species into less toxic Cr(III) is an important target in heterogeneous catalysis. In this work, the catalytic activities of a series of Keggin cluster-based aryl sulfonium polyoxometalate hybrids, (FPDS)₃[PMo₁₂O₄₀] (1), (FPDS)₃[PW₁₂O₄₀] (2), (FPDS)₄[SiMo₁₂O₄₀] (3), and (FPDS)₄[SiW₁₂O₄₀] (4), toward the photocatalytic reduction of Cr(VI) have been analyzed and compared. Here, we used the aryl sulfonium counterions to modulate the POM cluster's solubility in water and stabilize the photogenerated e^--h⁺ pair on the cluster. All of the hybrids 1-4 catalyzed the reduction of Cr(VI) to Cr(III) under ultraviolet (UV) irradiation, and their photocatalytic efficiencies followed the order hybrid 1 > hybrid 3 > hybrid 2 > hybrid 4, with the rate-constant values of 0.048, 0.0056, 0.0035, and 0.0028 min^-1, respectively. Hybrid 1 with [PMo₁₂O₄₀]^3- Keggin cluster exhibited the best photocatalytic activity in the series yielding a 99% reduction in 120 min. The reasons behind the best photocatalytic activity of hybrid 1 are identified as its low band gap, less charge recombination, and fast photoresponse. The electron-trapping analyses performed using AgNO₃ revealed electrons as the main reactive species responsible for the photocatalytic reduction of Cr(VI). A plausible photocatalytic mechanism has also been proposed based on electron-trapping experiments. The present study shows that aryl sulfonium Keggin hybrids can function as efficient photocatalysts for Cr(VI) reduction, and their catalytic efficiency varies with the nature of the Keggin cluster.

RhB-Embedded Zirconium-Biquinoline-Based MOF Composite for Highly Sensitive Probing Cr(VI) and Photochemical Removal of CrO42-, Cr2O72-, and MO

How to accurately detect and efficiently sweep Cr(VI) from contaminated water has come into focus. Zirconium-based metal-organic frameworks (MOFs) play vital roles in water environmental chemistry due to excellent hydrolysis-resistant stability. However, as photochemical probes and photocatalysts, poor performances in detection sensitivity, selectivity, and photosensitiveness limit sole Zr-MOFs' applications. So, it is urgent to quest valid strategies to break through the dilemmas. Embedding luminous dyes into MOFs has been considered one of the most feasible avenues. Herein, a dual-emissive RhB@Zr-MOF with orange-yellow fluorescence has been assembled by in situ-encapsulating rhodamine B (RhB) into a zirconium-biquinoline-based MOF. Actually, within RhB@Zr-MOF, the aggregation fluorescence quenching (ACQ) effect of RhB molecules was effectively avoided. Notably, RhB@Zr-MOF exhibits a rapid fluorescence quenching response toward Cr(VI) ions with high selectivity, sensitivity, and anti-interference abilities. More interestingly, unlike the most widely reported fluorescence resonance energy transfer (FRET) between MOFs and encapsulated guest modules, photoinduced electron transfer from RhB to Zr-MOF has been confirmed by modeling the ground state and excited states of RhB@Zr-MOF using density functional theory (DFT) and time-dependent DFT (TD-DFT). The effective electron transfer makes RhB@Zr-MOF more sensitive in probing Cr₂O₇^2- and CrO₄^2- ions with ultralow detection limit (DL) values of 6.27 and 5.26 ppb, respectively. Prominently, the detection sensitivity based on DL values has been increased about 6 and 9 times, respectively, compared with pristine Zr-MOF. Moreover, rather negative CB and positive VB potentials make RhB@Zr-MOF have excellent photochemical scavenging ability toward Cr(VI) and MO.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Strategic Design of Mg-Centered Porphyrin Metal-Organic Framework for Efficient Visible Light-Promoted Fixation of CO2 under Ambient Conditions: Combined Experimental and Theoretical Investigation

The sunlight-driven fixation of CO2 into valuable chemicals constitutes a promising approach toward environmental remediation and energy sustainability over traditional thermal-driven fixation. Consequently, in this article, we report a strategic design and utilization of Mg-centered porphyrin-based metal-organic framework (MOFs) having relevance to chlorophyll in green plants as a visible light-promoted highly recyclable catalyst for the effective fixation of CO2 into value-added cyclic carbonates under ambient conditions. Indeed, the Mg-centered porphyrin MOF showed good CO2 capture ability with a high heat of adsorption (44.5 kJ/mol) and superior catalytic activity under visible light irradiation in comparison to thermal-driven conditions. The excellent light-promoted catalytic activity of Mg-porphyrin MOF has been attributed to facile ligand-to-metal charge transfer transition from the photoexcited Mg-porphyrin unit (SBU) to the Zr6 cluster which in turn activates CO2, thereby lowering the activation barrier for its cycloaddition with epoxides. The in-depth theoretical studies further unveiled the detailed mechanistic path of the light-promoted conversion of CO2 into high-value cyclic carbonates. This study represents a rare demonstration of sunlight-promoted sustainable fixation of CO2, a greenhouse gas into value-added chemicals.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

A new porphyrinic vanadium-based MOF constructed from infinite V(OH)O4 chains: syntheses, characterization and photoabsorption properties

A new porphyrinic vanadium-based metal–organic framework (MOF), namely V-MOF-10 [V2(OH)2(H2TCPP)], constructed from {V(OH)O4}∞ chains and 4-tetracarboxyphenylporphyrin linkers, was synthesized by a solvothermal procedure.

A series of POM compounds constructed using a flexible ligand containing three coordination groups: electrocatalytic and photocatalytic reduction and amperometric detection of Cr(vi)

Four polyoxometalate-based compounds can be used as electrocatalysts and electrochemical sensors for amperometric detection of NO2− and Cr(VI), and also have the performance of photocatalytic reduction of Cr(VI).

Multi-functional metal-organic frameworks for detection and removal of water pollutions

Water pollutions have caused serious threats to the aquatic environment and human health, it is of great significance to monitor and control their contents in water. Compared with the traditional...

Visible-light-driven sonophotocatalysis for enhanced Cr(VI) reduction based on mixed-linker zirconium-porphyrin MOFs

In this study, we synthesized and characterized two mixed-linker zirconium-porphyrin metal-organic frameworks, PCN-134 and PCN-138 which constructed from tetratopic light harvesting TCPP ligand and tritopic BTB/TBTB ligand (TCPP = trakis(4-carboxyphenyl)porphyrin),...

Preparation and performance of Novel Ni-doped Iron oxychloride with High singlet oxygen generation

Singlet oxygen with lower oxide electrode potential but higher selective oxidation ability towards specific organic contaminants had been paid great attention. An efficient system with high singlet oxygen generation (over...

Visible-Light-Driven Sonophotocatalysis for the Rapid Reduction of Aqueous Cr(VI) Based on Zirconium-Porphyrin Metal-Organic Frameworks with csq Topology

Photochemical treatment of highly toxic Cr(VI) is a desirable and ecofriendly method to protect the environment and human beings. In this study, a MOF-based sonophotocatalytic system is established, in which visible-light-driven sonophotocatalytic reduction of toxic Cr(VI) to Cr(III) in water is investigated using zirconium-porphyrin metal-organic frameworks (MOFs) structured as PCN-222(M) [M = H₂, Zn(II), Fe(III), Co(II)]. In the view of the synergistic effect of sonochemistry and photocatalysis, PCN-222(M) exhibited enhanced activities for Cr(VI) reduction compared with the photocatalytic process. Kinetic studies showed that apparent reaction rate constants in the sonophotocatalytic system of PCN-222(M) are 1.5-3.3 times higher than those in photocatalysis. Fluorescence and UV-vis absorption spectra measurements demonstrate that the sonophotocatalytic process promotes the transfer of photoinduced electrons from PCN-222(M) to Cr(VI), thus enhancing the catalytic performance. The innovative combination of porous MOFs and sonophotocatalytic technology might become a feasible strategy to improve the existing MOF-based photocatalytic systems.

Terephthalate and trimesate metal-organic frameworks of Mn, Co, and Ni: exploring photostability by spectroscopy

We report a rapid synthesis for the fabrication of terephthalate and trimesate metal-organic frameworks (MOFs) of Mn, Co, and Ni by ultrasonication of organic linkers with freshly prepared metal hydroxides. The MOFs were characterized by various microscopic and spectroscopic techniques to understand their structural, functional, and optical properties. MOFs with low bandgap energy (1.88-2.73 eV) showed strong absorbance in the UV-visible range. MOFs were exposed to UV irradiation for 40 h to understand their photostability. The MOFs showed decreased surface area and porosity with CoBTC as an exception. PXRD was less convincing for exploring functional changes in the UV-irradiated MOFs. XPS predicted changes in the oxidation states of metal nodes, the degradation of the organic linkers, and decarboxylation process in many of the transition MOFs. The study predicted terephthalate-based MOFs as more photostable than corresponding trimesate-based MOFs. This study is one of the first attempts in exploring photostability of MOFs with Mn, Co, and Ni as nodes.

Simple fabrication of Z-scheme MgIn2S4/Bi2WO6 hierarchical heterostructures for enhancing photocatalytic reduction of Cr(vi)

Direct Z-scheme MgIn2S4/Bi2WO6 hierarchical heterostructures were simply fabricated, exhibiting distinctly enhanced photocatalytic activity for Cr(vi) reduction under simulated sunlight irradiation.