Polypyrrole-induced active-edge-S and high-valence-Mo reinforced composites with boosted electrochemical performance for the determination of 2,4,6-trichlorophenol in the aquatic environment

With the extensive application of halogenated aromatic compounds, including 2,4,6-Trichlorophenol (2,4,6-TCP), improper treatment or discharge contribute to persistently harmful effects on humans and the ecosystem, rendering the identification and monitoring of 2,4,6-TCP in the aquatic environment urgently required. In this study, a highly sensitive electrochemical platform was developed using active-edge-S and high-valence-Mo rich MoS₂/polypyrrole composites. MoS₂/PPy illustrates superior electrochemical performance and catalytic activity and has not been explored for detecting chlorinated phenols previously. The local environment of polypyrrole induces the richness of active edge S and a high oxidation state of Mo species in the composites, both of which endorse a sensitive anodic current response due to the favored oxidation of 2,4,6-TCP through nucleophilic substitution. Also, the higher complementarity between pyrrole and 2,4,6-TCP with respective electron-rich and electron-poor features through π-π stacking interactions enhances the specific detection capability of 2,4,6-TCP by the MoS₂/polypyrrole-modified electrode. The MoS₂/polypyrrole-modified electrode achieved a linear range of 0.1-260 μM with an ultralow limit of detection of 0.009 μM. Additionally, the structural stability boosted by the linkage of polypyrrole and MoS₂ results in good resistance and satisfactory recovery in real water samples. The compiled results demonstrate that the proposed MoS₂/polypyrrole composite opens up a new potential to advance a sensitive, selective, facile fabrication, and low-cost platform for the on-site determination of 2,4,6-TCP in aquatic systems. The sensing of 2,4,6-TCP is important to monitor its occurrence and transport, and can also serve to track the effectiveness and adjust subsequent remediation treatments applied to contaminated sites.

Molybdenum Disulfide/Tin Disulfide Ultrathin Nanosheets as Cathodes for Sodium-Carbon Dioxide Batteries

Metal-CO₂ rechargeable batteries are of great importance due to their higher energy density and carbon capture capability. In particular, Na-CO₂ batteries are potential energy-storage devices that can replace Li-based batteries due to their lower cost and abundance. However, because of the slow electrochemical processes owing to the carbonated discharge products, the cell shows a high overpotential. The charge overpotential of the Na-CO₂ battery increases because of the cathode catalyst's inability to break down the insulating discharge product Na₂CO₃, thereby resulting in poor cycle performance. Herein, we develop an ultrathin nanosheet MoS₂/SnS₂ cathode composite catalyst for Na-CO₂ battery application. Insertion of SnS₂ reduces the overpotential and improves the cyclic stability compared to pristine MoS₂. As shown by a cycle test with a restricted capacity of 500 mAh/g at 50 mA/g, the battery is stable up to 100 discharge-charge cycles as the prepared catalyst successfully decomposes Na₂CO₃. Furthermore, the battery with the MoS₂/SnS₂ cathode catalyst has a discharge capacity of 35 889 mAh/g. The reasons for improvements in the cycle performance and overpotential of the MoS₂/SnS₂ composite cathode catalyst are examined by a combination of Raman, X-ray photoelectron spectroscopy, and extended X-ray absorption fine structure analysis, which reveals an underneath phase transformation and changes in the local atomic environment to be responsible. SnS₂ incorporation induces S-vacancies in the basal plane and 1T character in 2H MoS₂. This combined impact of SnS₂ incorporation results in undercoordinated Mo atoms. Such a change in the electronic structure and the phase of the MoS₂/SnS₂ composite cathode catalyst results in higher catalytic activity and reduces the cell overpotential.