Novel energetic metal-organic frameworks assembled from the energetic combination of furazan and tetrazole

Self-Assembly Method for Synthesizing High-Dimensional EMOFs with High Stability and Laser Response

Dimension and solvent molecules affect the performance of energetic metal-organic frameworks (EMOFs). High-dimensional EMOFs are usually characterized by high stability and low sensitivity due to their complex network structure. However, solvent molecules affect the detonation performance of EMOFs, and these molecules may be removed at low temperatures, resulting in structural collapse and affecting the stability of EMOFs. In this work, zero-dimensional (0D) Co(AFTO)2·(H2O)2 (EMOF 1) and Ni(AFTO)2·(H2O)2 (EMOF 2) with coordinated water molecules and [Co(AFTO)2]n·EtOH (EMOF 3) and [Ni(AFTO)2]n (EMOF 4) (AFTO = 5-(4-amino-furazan-3-yl)-1-hydroxytetrazole) with high-dimensional structure were synthesized using hydrothermal and self-assembly methods in ethanol, respectively. Structural and performance tests show that EMOF 3 and 4 exhibit remarkable thermal stability and low mechanical sensitivity. This method is a simple, effective, and green technique for synthesizing high-dimensional EMOFs with high stability through self-assembly in ethanol solution. In addition, EMOF 3 and 4 can be used as primary green laser explosives.

In situ growth of copper-based energetic complexes on GO and an MXene to synergistically promote the thermal decomposition of ammonium perchlorate

In this work, using tri(5-aminotetrazolium)triazine (H3TATT) as an energetic ligand, two new energetic complexes (ECs), Cu(HTATT)(H2O)2 (EC-Cu1) and [Cu3(TATT)2(H2O)2]n (EC-Cu2), have been synthesized under hydrothermal conditions. Their crystal structures, thermal decomposition behaviors and specific heat capacities were determined respectively. In addition, two ECs were combined with GO (graphene oxide) and an MXene (Ti3C2TX) respectively by an in situ growth strategy to obtain four carbon nanomaterials/EC composites, which were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The effects of two ECs and four composites on the thermal decomposition of AP were studied by differential scanning calorimetry (DSC). Among them, the sample containing 8 wt% composite (GO/EC-Cu2) has the best promoting effect on AP, causing the high temperature decomposition peak to overlap with the low temperature decomposition peak of AP, reducing the decomposition peak temperature of AP from 443.6 °C to 308.9 °C, and the heat release is up to 4875 J g-1. Compared with ECs acting solely on AP, composite materials have stronger synergistic and promoting effects. This study provides a new example of the synthesis of carbon nanomaterial/EC composites and the improvement of the performance of AP-based solid propellants.

Design, preparation, and combustion performance of energetic catalysts based on transition metal ions (Cu2+, Co2+, Fe2+) and 3-aminofurazan-4-carboxylic acid

Development of energetic catalysts with high energy density and strong catalytic activity has become the focus and frontier of research, which is expected to improve the combustion performance and ballistic properties of solid propellants. In this work, three energetic catalysts, M(H2O)4(AFCA)2·H2O (AFCA = 3-aminofurazan-4-carboxylic acid, M = Cu, Co, Fe), are designed and synthesized based on the coordination reaction of transition metal ions and the energetic ligand. The target products are characterized by single crystal X-ray diffraction, Fourier transform infrared spectroscopy, differential thermal analysis, optical microscopy, and scanning electron microscopy. The results reveal that Cu(H2O)4(AFCA)2·H2O crystallizes in the monoclinic space group, Dc = 1.918 g cm-3. Co(H2O)4(AFCA)2·H2O, and Fe(H2O)4(AFCA)2·H2O belong to orthorhombic space groups, their density is 1.886 g cm-3 and 1.856 g cm-3, respectively. In addition, the designed catalysts show higher catalytic activity than some reported catalysts such as Co(en)(H2BTI)2]2·en (H3BTI = 4,5-bis(1H-tetrazol-5-yl)-1H-imida-zole), Co-AzT (H2AzT = 5,5'-azotetrazole-1,1'-diol), and [Pb(BTF)(H2O)2]n (BTF = 4,4'-oxybis [3,3'-(1-hydroxy-tetrazolyl)]furazan) for the thermal decomposition of ammonium perchlorate (AP). The high-temperature decomposition peak temperatures of AP/Cu(H2O)4(AFCA)2·H2O, AP/Co(H2O)4(AFCA)2·H2O, and AP/Fe(H2O)4 (AFCA)2·H2O are decreased by 120.3 °C, 151.8 °C and 89.5 °C compared to the case of pure AP, while the heat release of them are increased by 768.8 J g-1, 780.5 J g-1, 750.9 J g-1, respectively. Moreover, the burning rates of solid propellants composed of AP/Cu(AFCA)2(H2O)4·H2O, AP/Co(AFCA)2(H2O)4·H2O and AP/Fe(AFCA)2(H2O)4·H2O are increased by 2.16 mm s-1, 2.53 mm s-1, and 1.57 mm s-1 compared with the case of pure AP. This research shows considerable application prospects in improving the combustion and energy performance of solid propellants, it is also a reference for the design and preparation of other novel energetic catalysts.

Controllable Structural Modulation: Assembling Variable Dimension Energetic Metal-Organic Frameworks via Free Protons

Herein, we provide an efficient strategy for constructing three-dimensional (3D) energetic coordination polymers (ECPs), namely, metal-organic frameworks (EMOFs), avoiding solvent coordination without changing the organic ligands or metal nodes. Three ECPs with the same ligand and metal center, namely, two-dimensional (2D) layer ECP [Pb(HOBTT)(H₂O)₂]_n (1), 3D solvent-free EMOFs [Pb(HOBTT)]_n (2), and dense [Pb₃(OBTT)₂]_n (3) (H₃OBTT = 4,5-bis(1-hydroxytetrazol-5-yl)-2H-1,2,3-triazole), were rationally designed and synthesized via free protons. As expected, the theoretical density of 3 (4.080 g·cm^-3) is greater than those of 2 (3.299 g·cm^-3) and 1 (3.055 g·cm^-3). Thermal stabilities indicate that their decomposition temperature exceeds 300 °C. Theoretical calculations show that the detonation performance of 3 is better than that of 1 and 2. The detonation performance of 1-3 was further proven by laser irradiation.

Preparation of a Chitosan-Lead Composite Carbon Aerogel and Its Catalytic Thermal Decomposition Performance on Ammonium Perchlorate

Chitosan-lead (CS-Pb) carbon aerogels were prepared by ionic cross-linking and high-temperature carbonization using chitosan (CS) as the carbon precursor. The obtained carbon aerogels were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), and X-ray photoelectron spectroscopy (XPS). The obtained aerogels have a 3D structure and a large surface area, which can effectively prevent the agglomeration phenomenon of metals. Differential thermal analysis (DTA) was used to analyze the catalytic performance of a carbon aerogel for ammonium perchlorate (AP). The results showed that the CS-Pb carbon aerogel reduced the peak temperature of AP pyrolysis from 703.9 to 627.7 K. According to the Kissinger method calculations, the E_a of AP decomposition decreased about 27.2 kJ/mol. The TG data at different warming rates were analyzed by the Flynne-Walle-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods, which are two of the isoconversion methods, and the activation energies of AP and AP+CS-Pb-3.5 were calculated. Between the conversion degrees (α) of 0.1 and 0.9, the E_a values obtained by the two isoconversion methods are similar and have a certain match. Also, the two isoconversion methods confirm Kissinger's calculation. Finally, thermogravimetry-mass spectrometry (TG-MS) was used to monitor the gases generated during the thermal decomposition of the AP+CS-Pb-3.5 system in real time.

Nitrogen-rich ion salts of 1-hydroxytetrazole-5-hydrazide: a new series of energetic compounds that combine good stability and high energy performance

High-efficiency explosives that combine high stability and excellent energy performance are one of the key directions of energetic materials research. In this study, a novel monocyclic hydroxytetrazole derivative (3) with high stability was prepared, and a series of insensitive energetic ionic salts were derived from it. Benefiting from their outstanding performance in terms of density, 3D hydrogen bonding and π-electron interactions, these salts are excellent in both detonation performance (D = 8709 to 9314 m s^-1 and P = 29.9 to 35.6 GPa) and thermal stability (T_d = 193.0-232.2 °C). The hydrazine salt (2) exhibits high detonation properties (D = 9314 m s^-1 and P = 35.6 GPa), due to its high density (ρ = 1.71 g cm^-3) and high heat of formation (Δ_fH = 563.2 kJ mol^-1 = 3.19 kJ g^-1). In addition, the high thermal stability (T_d = 232.0 °C) and low mechanical sensitivity (IS = 30 J and FS = 360 N) of 2 are also unmatched by HMX and TKX-50. These improved properties demonstrate the great promise of 2 as an insensitive high-energy explosive.

Construction of highly energetic metal-organic frameworks with a nitrobenzene derivative

Three metal–organic frameworks [CdL(DMF)]n 1, {[CuL(H2O)(DMF)]•DMF•0.5H2O}n 2 and [Nd(HL)L(DMF)3]n 3 have been synthesized with a nitrobenzene derivative 4-((5-hydroxy-2,4-dinitrophenoxy)methyl)-3-nitrobenzoic acid (H2L). Compound 1 has a dense three-dimensional framework with 1D Cd...

Series of AzTO-Based Energetic Materials: Effect of Different π-π Stacking Modes on Their Thermal Stability and Sensitivity

π-Stacking is common in materials, but different π-π stacking modes remarkably affect the properties and performances of materials. In particular, weak interactions, π-stacking and hydrogen bonding, often have a great impact on the stability and sensitivity of high-energetic compounds. Therefore, several of energetic materials based on 1,1'-dihydroxyazotetrazole (1) with a nearly flat structure, such as the salts of aminoguanidine (2), 1,3-diaminoguanidine (3), imidazole (4), pyrazole (5) and triaminoguanidine (6), and a cocrystal of 2-methylimidazole (7), were designed and synthesized. Based on single-crystal diffraction data, thermal decomposition behaviors, and the mechanical sensitivity test, the compounds of 4, 5, and 7 with face-to-face π-π stacking display outstanding thermal stability and insensitivity.

Improved Detonation Performance Via Coordination Substitution: Synthesis and Characterization of Two New Green Energetic Coordination Polymers

In this work, a new energetic coordination polymer (ECP), [Cu(HBTI)(H₂O)]_n (1) (H₃BTI = 4,5-bistetrazole-imidazole), was synthesized by a hydrothermal method. Due to the existence of coordination water molecules in 1, however, its energy density was limited, which led to the insufficient detonation performance. To further improve its detonation performance, [Cu(H₂BTI)(NO₃)]_n (2) was then obtained by substituting the coordinated water molecule in 1 with nitrate through the coordination substitution reaction under acidic conditions. The structures of two ECPs were respectively characterized using X-ray single-crystal diffraction, and the theoretical density of 2 (2.227 g·cm^-3) was greater than 1 (1.851 g·cm^-3). Thermogravimetric analyses showed that 2 has a one-step rapid weight loss process compared with the two-step slow weight loss process of 1. The theoretical calculations indicated that the detonation performances of 2 were better than those of 1. Moreover, the promotion effects of two ECPs on the combustion decomposition of ammonium perchlorate were studied using a differential scanning calorimetry method.

Imino-bridged N-rich energetic materials: C4H3N17 and their derivatives assembled from the powerful combination of four tetrazoles

Imino-bridged symmetric N-rich energetic materials with high energetics and good stability.

A new 3D Ag(i)-based high-energy metal organic frameworks (HE-MOFs): synthesis, crystal structure and explosive performance

A new 3D HE-MOF, [Ag₂(TABT)(NO₃)₂]_n, where TABT represents 4,4′,5,5′-tetraamine-3,3′-bis-1,2,4-triazole, was synthesized by hydrothermal method, exhibiting high density, good thermostability, insensitivity and relative high detonation performance.